Search

A paper making process adopts primarily a generic flow of steps across industries. This industry is one of the largest in the world and is touted to be growing further with incremental demand for paper and its affiliated products for its eco-friendliness. However, paper and pulp industry is a heavily resource dependent industry be it forest resource, water resource, energy or chemicals. In fact, it is said to be one of the top five leading consumers of energy. Given such, this industry is a major contributor to depleting natural resources and increasing greenhouse gas emission, adding intensively to the global warming. Against such a backdrop, it offers relevant cause to study the scholarly discussion and debate on sustainable issues in paper and pulp industry playing around the academic universe and also to poke into and discuss some of the issues of sustainability in the industry emerging out of the articles. Accordingly, through this article, the present state of affairs in the academic fraternity on the above topic has been laid out through a bibliometric analysis, while some of the common challenges of environmental sustainability associated with the paper making process have been identified from the literature and discussed thereof. [ABSTRACT FROM AUTHOR]

The removal and collection of dust particles from the air discharged into the atmosphere by industrial plants processing, transporting and storing dusty materials is an important objective for employers to prevent air pollution according to environmental legislation and employee safety regulations. Where the dust in question is flammable and may generate an explosive atmosphere, measures must be taken to prevent explosion and/or limit the effects of explosion. To this end, proper assessment of the risk of explosions is essential in order to determine the effectiveness of the measures implemented and/or the need to take additional measures. As there is no specific assessment method for the risk of explosions in dust/air explosive atmospheres, various bodies/persons have developed their own more or less comprehensive assessment methods. In the paper are presented some important aspects included in the assessment procedure applied by us for the evaluation of the risk of explosions in dust removal systems with emphasis on the development of laboratory tests to determine the explosive characteristics of explosive air/flammable dust mixtures as well as on the constructive solutions to limit the effects of possible explosions. It highlights the importance of the competence of persons involved in the design, installation, maintenance and inspection of installations regarding the application of standards, guidelines and legislation in the field. [ABSTRACT FROM AUTHOR]

Copyright of CISTI (Iberian Conference on Information Systems & Technologies / Conferência Ibérica de Sistemas e Tecnologias de Informação) Proceedings is the property of Conferencia Iberica de Sistemas Tecnologia de Informacao and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

An innovation in paper technology that is totally different from the papermaking technology that has been known now, has been found in the 21st century in China. This new discovery paper does not use cellulose fibers as its raw material, and does not use water at all in its production process. Because it is made of inorganic mineral coming from calcite rocks, this paper is called 'rock paper' or stone paper. The process of stone papermaking in principle mixes fine powder of calcite rock with non-toxic resin, one of which is HDPE (high density polyethylene), as well as other additives, then melted at high temperatures and formed into a sheets like paper. The properties of stone paper are very similar and even have advantages compared to conventional paper. This type of paper is claimed to be more environmentally friendly than conventional paper because it does not use plant fibers as raw material, which means there is no trees cut. It can be recycled and produces low greenhouse gas emissions. [ABSTRACT FROM AUTHOR]

The bonding potential of pulp fibers is reduced by the paper recycling process. The most common technique for recovering this lost potential of secondary fibers involves upgrading the recycled pulp by blending it with virgin softwood pulps. In this research, we asses print stability on acid agents of UV inkjet prints when using straw pulp as reinforcing fibers in recycled papers. For that purpose, printing substrates were formed on the Rapid Kothen device from pulp obtained by blending different proportions of straw pulp and pulp of recycled fibers. Each printing substrate was printed in full tone with cyan, magenta, yellow, and black inks by digital technique of UV inkjet printing. Printed substrates were treated with various inorganic and organic acids under the conditions defined in the international standard ISO 2836:2004. Based on the measured spectrophotometric values of the untreated and acid-treated prints, the Euclidean color difference (ΔE00) was defined and the stability of prints was assessed. The results of spectrophotometric measurements indicate small to medium color differences of the prints due to the effect of all acids (ΔE00max. < 2.4) and it can be concluded that straw pulp in printing substrates from recycled fibers contributes to good chemical stability of prints. This research concludes that straw, as an annual renewable resource, can be used in conjunction with waste paper as an alternative to wood, which is currently the dominant raw material for graphic industry and producing paper. [ABSTRACT FROM AUTHOR]

Paper is a widely used material that is affected by environmental stresses and makes paper prone to damage. The paper is characterized by the absorption of water and moisture due to porosity, We have overcome this problem by employing polymer materials as water-resistant coatings acting as a barrier to protecting the paper, Polymer paper coating forms a clear membrane on the fiber forming a bridge of monomers on the surface of the paper. Two polymer coatings were used as a treatment, namely Polystyrene and sealer (alkyd resin). The results showed the possibility of enhancing the durability of the paper and preserving it from damage and deterioration. The treatment gave a decrease in moisture content, response to abrasion and scratching while increased folding tolerability, the burst strength, tear resistance, hardness compared to untreated paper and the paper porosity important indicator to overcome. The degree of brightness, the degree of color and visible light and ultraviolet radiation [UV] effect of the specimens were studied in detail. [ABSTRACT FROM AUTHOR]

Clinical paper searching is a major task for clinical researchers to collect authoritative and up-to-date evidences to support their research works and clinical practices. Currently, this task needs huge amount of labor work. Researchers usually spend a lot of time searching on the online repository and iterating many times to get the final paper list. Systematic review is a special case, in which the paper searching process is a critical step. To address this challenge, this paper introduces a method to streamline the iterative paper searching process. It automatically selects the most probably matched papers, and then generates new search strategy. All the intermediate results are visualized based on the paper citation graph. It assembles technologies such as Page Rank and Topic-based clustering to accelerate the paper searching tasks. The precision, recall, and execution time of the proposed method are then evaluated by comparing with published systematic reviews [ABSTRACT FROM AUTHOR]

Pineapple has been known for a number of beneficial biological activities such as anti-oxidative and antibrowning. Some of these bioactivities are contributed by enzymatic complex in pineapple and it can be found mainly in the skin extracted pineapple juice. The purpose of this study is to determine the effect of the pineapple juice as a pulping and bleaching agent in the process of papermaking. During pulping of pineapple leaf fibre, the mixture of pineapple juice/water was added together with a constant amount of 3% Sodium Hydroxide (NaOH) at various concentration of pineapple juice (0%, 20%, 40%, 60% and 80%). Pineapple leaf fibre (PALF) was soaked several times with pineapple juice and NaOH during pulping and bleaching process in order to get the optimum results of the paper sheet obtained. The mechanical and physical properties of paper sheet were studied by measuring its tensile strength, tear resistance and water absorption. Comparatively, paper sheet produced from NaOH pulping shows better mechanical and physical properties than the mixture pulping of NaOH and pineapple juice. Additionally, pulping with higher concentration of pineapple juice tends to give long fibre rather than short fibre. Overall, the results of this study can be used as an alternative way in the production of paper and it also opens a door to utilize wisely the waste residue of pineapple in other sectors. [ABSTRACT FROM AUTHOR]

Processing the waste paper produces huge amounts of waste - papermaking sludge. This kind of waste includes around 50 % of inorganic material and high proportion of water. Its current economic recovery is very limited, which affects the overall efficiency of recycling paper. However, the elementary and chemical composition has a high potential for wider and more economically efficient use in various industrial fields. The object of this paper is research of composition and physical properties of such sludge from old paper recycling. The work analyzes the possibilities of the sludge material recovery and aims to develop a new product for the construction industry - building plates with different physical properties and their areas of application. Realized experimental research has shown high potential of material recovery of this waste. Research results show that the new product developed on the basis of the papermaking sludge achieves excellent mechanical properties. Thanks to this way, the material recovery of sludge from old paper recycling obtains not only economically efficient new product but also environmental benefits. [ABSTRACT FROM AUTHOR]

The paper deals with the preferences of the Slovak university students either for digital or print medium while reading for school work. Respondents of our sample belong to generation Y who grow up and still live in the digital environment. In spite of this fact we supposed some share of them tends to utilise hard copy or combines it with digital platforms. Findings showed that printed text is widely preferred among our sample of respondents. Majority of university students use paper as a medium for school work. Important factors influencing a choice of medium are length of text, ability to concentrate on reading text, overall time spent by reading, and attitudes of individuals. [ABSTRACT FROM AUTHOR]

Paper sheets were produced from bleached kraft pulp, and office and newsprint waste paper. Nanoparticles from black alder bark, grey alder bark and pine bark as well as birch sawdust were obtained for using them as reinforcing fillers in paper. Non-extracted bark and that extracted in biorefinery were used. For producing nanoparticles, the materials were destructed using the thermocatalytic destruction method and then dispersed in water medium in a ball mill. At a sufficient concentration, gel-like dispersions were obtained, which contained nanoparticles with the size ∼300 nm. The dispersions were introduced in paper furnish in different amounts. It has been established that all the nanoparticle fillers increase the tensile index and burst index in dry and wet states. The nanoparticle fillers from extracted bark increase the mechanical indices to a higher extent. At 20% filler content, tensile index in a dry state increases in the case of non-extracted grey alder bark, black alder bark and pine bark by 28, 30 and 15%, and in the case of extracted ones - by 44, 40 and 30%, respectively; the burst index increases by 78, 19 and 4%, and 91, 25 and 14%, respectively. The nanoparticle filler from birch sawdust increases the tensile strength in a dry state by 9% and burst index by 20%. The obtained nanoparticle fillers slightly improve also the water resistance of paper. [ABSTRACT FROM AUTHOR]

CdSe quantum dot has great potential in various applications especially for emitting devices. One example potential application of CdSe quantum dot is security label for anti-counterfeiting. In this work, we present a practical approach of security label on paper using one and two colors of colloidal CdSe quantum dot, which is used as stamping ink on various types of paper. Under ambient condition, quantum dot is almost invisible. The quantum dot security label can be revealed by detecting emission of quantum dot using photoluminescence and cnc machine. The recorded quantum dot emission intensity is then analyzed using home-made program to reveal quantum dot pattern stamp having the word 'RAHASIA'. We found that security label using quantum dot works well on several types of paper. The quantum dot patterns can survive several days and further treatment is required to protect the quantum dot. Oxidation of quantum dot that occurred during this experiment reduced the emission intensity of quantum dot patterns. [ABSTRACT FROM AUTHOR]

The paper is focused on the possibility of creation teaching aids with using colour 3D printers. The main emphasis will be given to MCOR IRIS HD printing machine. The usage of teaching aids and models representing the real phenomenon is quite useful in many scientific spheres. Nowadays we can achieve these models in various ways from the classic machine-tools to modern 3D printers which became very popular. The technology of MCOR IRIS is one of the latest in the field of the 3D printing. The printer uses ordinary white or printed papers as its printing material. Paper sheets are glued and cut by the special knife. This technology allows the production of fully coloured and relatively cheap models. There are still several limits such as sharp edges or the duration of the building process which can destroy the results. On the other hand, the printer is easily able to build a lot of different models (including tactile maps, houses, volcanos) in comparatively good quality and short time. The paper discusses the strength and weakness of mentioned technology focusing on data accessibility and models preparation. The main benefit is an easy and accessible creation of models for the scientific researchers and exhibitions. [ABSTRACT FROM AUTHOR]