Search

A simple modification to an existing powder diffraction specimen holder is given to allow for the presentation of filter papers for analysis. A mild steel annulus holds the filter paper in place using magnets added to the rear of the specimen holder.

BACKGROUND: Chronic rhinosinusitis is regarded as a chronic airway disease. According to WHO recommendations, it may be a risk factor for COVID-19 patients. In most CRSwNP cases, the inflammatory changes affecting the nasal and paranasal mucous membranes are type-2 (T2) inflammation endotypes. METHODS: The current knowledge on COVID-19 and on treatment options for CRS was analyzed by a literature search in Medline, Pubmed, international guidelines, the Cochrane Library and the Internet. RESULTS: Based on international literature, on current recommendations by WHO and other international organizations as well as on previous experience, a panel of experts from EAACI and ARIA provided recommendations for the treatment of CRS during the COVID-19 pandemic. CONCLUSION: Intranasal corticosteroids remain the standard treatment for CRS in patients with SARS-CoV-2 infection. Surgical treatments should be reduced to a minimum and surgery preserved for patients with local complications and for those with no other treatment options. Systemic corticosteroids should be avoided. Treatment with biologics can be continued with careful monitoring in noninfected patients and should be temporarily interrupted during the course of the COVID-19 infection.

Abstract Closed-loop electronic medication management systems (EMMS) are recognised as an effective intervention to improve medication safety, yet evidence of their effectiveness in hospitals is limited. Few studies have compared medication turnaround time for a closed-loop electronic versus paper-based medication management environment. Objective To compare medication turnaround times in a paper-based hospital environment with a digital hospital equipped with a closed-loop EMMS, consisting of computerised physician order entry, profiled automated dispensing cabinets packaged with unit dose medications and barcode medication administration. Method Data were collected during 2 weeks at three private hospital sites (one with closed-loop EMMS) within the same organisation network in Queensland, Australia. Time between scheduled and actual administration times was analysed for first dose of time-critical and non-critical medications located on the ward or sourced via pharmacy. Key findings Medication turnaround times at the EMMS site were less compared to the paper-based sites (median, IQR: 35 min, 8–57 min versus 120 min, 30–180 min, P < 0.001). For time-critical medications, 77% were administered within 60 min of scheduled time at the EMMS site versus 38% for the paper-based sites. Similar difference was observed for non-critical medications, 80% were administered within 60 min of their scheduled time at the EMMS site versus 41% at the paper-based facilities. Conclusion The study indicates medication turnaround times utilising a closed-loop EMMS are less compared to paper-based systems. This improvement may be attributable to increased accessibility of medications using automated dispensing cabinets and electronic medication administration records flagging tasks to nurses in real time.

As heart failure with preserved ejection fraction (HFpEF) rises to epidemic proportions, major steps in patient management and therapeutic development are badly needed. With the current position paper we seek to update our view on HFpEF as a highly complex systemic syndrome, from risk factors and mechanisms to long-term clinical manifestations. We will revise recent advances in animal model development, experimental set-ups and basic and translational science approaches to HFpEF research, highlighting their drawbacks and advantages. Directions are provided for proper model selection as well as for integrative functional evaluation from the in vivo setting to in vitro cell function testing. Additionally, we address new research challenges that require integration of higher-order inter-organ and inter-cell communication to achieve a full systems biology perspective of HFpEF.

High-impact review papers describe and synthesize the current state of the art, the open questions and controversies, and provide ideas for future investigations. They are written not only for a specific scientific discipline but also for the broader Earth and space science community. They not only summarize the literature, but they also create a framework from which to understand the progress, problems, and connections between different communities, observations, models, and approaches. Here we describe how to write a high-impact review paper, and why you should consider writing one for Reviews of Geophysics.

The aim of this document was to provide a critical review of the current knowledge on hypersensitivity pneumonitis caused by the occupational environment and to propose practical guidance for the diagnosis and management of this condition. Occupational hypersensitivity pneumonitis (OHP) is an immunologic lung disease resulting from lymphocytic and frequently granulomatous inflammation of the peripheral airways, alveoli, and surrounding interstitial tissue which develops as the result of a non-IgE-mediated allergic reaction to a variety of organic materials or low molecular weight agents that are present in the workplace. The offending agents can be classified into six broad categories that include bacteria, fungi, animal proteins, plant proteins, low molecular weight chemicals, and metals. The diagnosis of OHP requires a multidisciplinary approach and relies on a combination of diagnostic tests to ascertain the work relatedness of the disease. Both the clinical and the occupational history are keys to the diagnosis and often will lead to the initial suspicion. Diagnostic criteria adapted to OHP are proposed. The cornerstone of treatment is early removal from exposure to the eliciting antigen, although the disease may show an adverse outcome even after avoidance of exposure to the causal agent.

In this paper, we investigate the accuracy and efficiency of discontinuous Galerkin spectral method simulations of under-resolved transitional and turbulent flows at moderate Reynolds numbers, where the accurate prediction of closely coupled laminar regions, transition and developed turbulence presents a great challenge to large eddy simulation modelling. We take full advantage of the low numerical errors and associated superior scale resolving capabilities of high-order spectral methods by using high-order ansatz functions up to 12th order. We employ polynomial de-aliasing techniques to prevent instabilities arising from inexact quadrature of nonlinearities. Without the need for any additional filtering, explicit or implicit modelling, or artificial dissipation, our high-order schemes capture the turbulent flow at the considered Reynolds number range very well. Three classical large eddy simulation benchmark problems are considered: a circular cylinder flow at Re-D=3900, a confined periodic hill flow at Re-h=2800 and the transitional flow over a SD7003 airfoil at Re-c=60,000. For all computations, the total number of degrees of freedom used for the discontinuous Galerkin spectral method simulations is chosen to be equal or considerably less than the reported data in literature. In all three cases, we achieve an equal or better match to direct numerical simulation results, compared with other schemes of lower order with explicitly or implicitly added subgrid scale models. Copyright (c) 2014 John Wiley & Sons, Ltd.

In this paper, we investigate the accuracy and efficiency of discontinuous Galerkin spectral method simulations of under-resolved transitional and turbulent flows at moderate Reynolds numbers, where the accurate prediction of closely coupled laminar regions, transition and developed turbulence presents a great challenge to large eddy simulation modelling. We take full advantage of the low numerical errors and associated superior scale resolving capabilities of high-order spectral methods by using high-order ansatz functions up to 12th order. We employ polynomial de-aliasing techniques to prevent instabilities arising from inexact quadrature of nonlinearities. Without the need for any additional filtering, explicit or implicit modelling, or artificial dissipation, our high-order schemes capture the turbulent flow at the considered Reynolds number range very well. Three classical large eddy simulation benchmark problems are considered: a circular cylinder flow at Re-D=3900, a confined periodic hill flow at Re-h=2800 and the transitional flow over a SD7003 airfoil at Re-c=60,000. For all computations, the total number of degrees of freedom used for the discontinuous Galerkin spectral method simulations is chosen to be equal or considerably less than the reported data in literature. In all three cases, we achieve an equal or better match to direct numerical simulation results, compared with other schemes of lower order with explicitly or implicitly added subgrid scale models. Copyright (c) 2014 John Wiley & Sons, Ltd.

Liquid chromatography/mass spectrometry (LC/MS)-based methods were developed for the analysis of 10 resin acids and five fatty acids in process waters of paper industries. No fragmentation of target compounds was observed using atmospheric pressure chemical ionization (APCI) with negative ionization. The [M - H]- ion permitted the individual quantification of fatty and aromatic resin acids, whereas the non-aromatic resin acids presented a single and common ion at m/z 301. Separation with two columns of different polarity permitted peak confirmation. The method that used a C8 column with 2-propanol in the mobile phase allowed a certain separation and identification of the non-aromatic resin acids, whereas the method using a C18 column provided detection limits 10-fold lower for fatty acids. Limits of detection were 0.10 ng for all compounds. Direct sample introduction was compared with liquid-liquid extraction, with similar recoveries (70-101%). Whereas slightly lower detection limits were obtained with liquid-liquid extraction, better reproducibility was observed for direct sample introduction. Resin and fatty acids were determined in process waters of several paper industries. Palmitic, dehydroabietic and non-aromatic resin acids were encountered in most water samples, at levels between 22 and 403 g l-1. LC/MS with direct sample introduction was found to be a good alternative to traditional liquid-liquid extraction and gas chromatography for the analysis of such compounds since no derivatization was required and sample manipulation was minimal.

Open access (OA) publishing, whereby authors, their institutions, or their granting bodies pay or provide a repository through which peer-reviewed work is available online for free, is championed as a model to increase the number of citations per paper and disseminate results widely, especially to researchers in developing countries. We compared the number of citations of OA and non-OA papers in six journals and four books published since 2000 to test whether OA increases number of citations overall and increases citations made by authors in developing countries. After controlling for type of paper (e. g., review or research paper), length of paper, authors' citation profiles, number of authors per paper, and whether the author or the publisher released the paper in OA, OA had no statistically significant influence on the overall number of citations per journal paper. Journal papers were cited more frequently if the authors had published highly cited papers previously, were members of large teams of authors, or published relatively long papers, but papers were not cited more frequently if they were published in an OA source. Nevertheless, author-archived OA book chapters accrued up to eight times more citations than chapters in the same book that were not available through OA, perhaps because there is no online abstracting service for book chapters. There was also little evidence that journal papers or book chapters published in OA received more citations from authors in developing countries relative to those journal papers or book chapters not published in OA. For scholarly publications in conservation biology, only book chapters had an OA citation advantage, and OA did not increase the number of citations papers or chapters received from authors in developing countries.

Open access (OA) publishing, whereby authors, their institutions, or their granting bodies pay or provide a repository through which peer-reviewed work is available online for free, is championed as a model to increase the number of citations per paper and disseminate results widely, especially to researchers in developing countries. We compared the number of citations of OA and non-OA papers in six journals and four books published since 2000 to test whether OA increases number of citations overall and increases citations made by authors in developing countries. After controlling for type of paper (e. g., review or research paper), length of paper, authors' citation profiles, number of authors per paper, and whether the author or the publisher released the paper in OA, OA had no statistically significant influence on the overall number of citations per journal paper. Journal papers were cited more frequently if the authors had published highly cited papers previously, were members of large teams of authors, or published relatively long papers, but papers were not cited more frequently if they were published in an OA source. Nevertheless, author-archived OA book chapters accrued up to eight times more citations than chapters in the same book that were not available through OA, perhaps because there is no online abstracting service for book chapters. There was also little evidence that journal papers or book chapters published in OA received more citations from authors in developing countries relative to those journal papers or book chapters not published in OA. For scholarly publications in conservation biology, only book chapters had an OA citation advantage, and OA did not increase the number of citations papers or chapters received from authors in developing countries.

Functional cellulose substrates with tetrazole moieties are generated to serve as universal platforms for the spatio-temporal immobilization of synthetic ultra-low fouling polymer brushes and protein species via a nitrile imine-mediated tetrazole-ene cycloaddition (NITEC)-based protocol. Poly(carboxybetaine acrylamide) brushes are grafted from initiators photo-patterned by NITEC utilizing single electron transfer living radical polymerization. Streptavidin is photo-immobilized with remarkable efficiency, opening the possibility to generate new materials for biomedical and biosensing applications.