Search

Aim: The present study investigated the influence of apical periodontitis (AP) on the severity of rheumatoid arthritis (RA) using a Wistar rat model., Methodology: Forty male Wistar rats were distributed across four groups (n = 10) based on the induction of RA and AP: Control, RA, AP, and RA + AP. RA was induced through two immunisations with type II collagen emulsified in incomplete Freund's adjuvant, followed by one immunisation with complete Freund's adjuvant. After 21 days of RA induction, AP was induced by exposing the pulp of four molars. Animals were euthanized after 28 days of pulp exposure. Through the experiment, visual and behavioural assessments tracked RA development and the knees and hind paw joints were measured. Micro-computed tomography scans of knees and hind paws, as well as mandibles and maxillae, were conducted to evaluate RA severity and the presence of AP, respectively. Serum samples were collected to analyse proinflammatory cytokines (IL-1β, IL-2, IL-17, and TNF-α). Non-parametric data were analysed using the Kruskal-Wallis test followed by Student-Newman-Keuls test, while one-way anova followed by Tukey's test was performed for parametric data. A significance level of 5% was employed., Results: All molars submitted to access cavity developed AP. All joints subjected to arthritis induction developed the disease, with AP + RA demonstrating a higher arthritis severity when compared to the RA group (p < .05). RA + AP group displayed a significantly larger hind paw and knee circumference compared to the RA group (p < .05). Micro-CT images of RA and RA + AP groups revealed joints with erosions and bone deformities, with a significantly lower bone surface density, lower trabecular number and higher trabecular separation in the hind paw and a significantly lower percent bone volume and higher trabecular separation in the knees of RA + AP group compared to RA group (p < .05). RA + AP group exhibited a significantly higher level of TNF-α and a lower level of IL-2 compared to all other groups (p < .05). Both RA and RA + AP groups had significantly higher IL-17 levels (p < .05), while there was no significant difference in IL-1β levels among the groups (p > .05)., Conclusion: The findings from this study underscore a possible relationship between apical periodontitis and the exacerbation of rheumatoid arthritis., (© 2024 British Endodontic Society. Published by John Wiley & Sons Ltd.)

This study evaluated the influence of the apical limit and the diameter of the instrumentation on the extrusion of the irrigating solution. Sixty human lower premolars were distributed into 5 groups according to the apical limit and diameter of the root canal instrumentation (n = 12): (G-1 40 ) R40 instrument 1 mm above the tooth length (TL) (Control); (G-1 50 ) R50 instrument 1 mm above the TL; (GF 25 ) R25 instrument at the TL; (GF 40 ) R40 instrument at the root canal length and (GF 50 ) R50 instrument at the TL. A space of 33.5 ± 1 mm 3 was created for storage of the extruded solution. Omnipaque contrast was added to the NaOCl solution in a 1:2 ratio, totaling 15 mL of solution to allow its visualization when extruded in microcomputed tomography. Final irrigation was performed with a syringe and needle and activated with a passive ultrasonic irrigation (PUI). Three activation cycles were performed. Data were tabulated and statistically analyzed (one-way ANOVA) with a significance level set at 5%. It was observed irrigating solution extrusion after final irrigation in all groups. However, there were no statistically significant differences among experimental groups, regardless of the diameter or apical limit of root canal instrumentation (p > 0.05). The different apical limits and diameters of root canal instrumentation did not influence the volume of extruded irrigating solution using passive ultrasonic irrigation., (© 2024. The Author(s), under exclusive licence to The Society of The Nippon Dental University.)

This study evaluated the impact of canal irrigation using surfactants associated to NaOCl on the percentage of voids of root canal filling through micro-computed tomographic (micro-CT) analysis. 27 mandibular mesial roots with Vertucci type II canal configuration with isthmus were selected and scanned in a micro-CT device. The specimens were assigned to three groups (n = 9), according to the irrigation solution during instrumentation: 2.5% NaOCl without additives (control), 2.5% NaOCl with 0.1% Benzalkonium Chloride and 2.5% NaOCl with 0.1% Tween 80. After obturation, the specimens were rescanned, and the percentage of voids were calculated. Data were analysed using one-way ANOVA with a significance level of 5%. The percentage of voids were similar among the groups (p > 0.05). None of the specimens showed completely voids-free areas. The addition of surfactants to NaOCl irrigation did not improve the quality of root canal filling of mandibular mesial root canals., (© 2024 Australian Society of Endodontology Inc.)

To evaluate the effect of calcium hydroxide (CH), sodium ascorbate (SA) and sodium thiosulfate (ST) filling the pulp chamber on color stability and longevity of teeth after internal bleaching. Crowns of bovine incisors were submitted to internal bleaching and divided into groups according the material used in the pulp chamber: Control, CH, SA, ST. Each group was divided into two subgroups according to the time to perform restorative procedures (7 or 15 days). Color measurement was performed with a spectrophotometer at nine periods. The darkening (ΔE) values were calculated. The Mann-Whitney test was used to statistically analyze the data (p ⟨ 0.05). After bleaching, ΔE values were higher than 3.5, showing that the procedure was effective. After 24 hours, no difference was observed between groups. After 7 days, SA showed higher ΔE than the control group (p ⟨ 0.05). CH and TS did not differ from the control group. In restorations performed after 7/15 days, SA group showed higher values of darkening after 1 and 4 months than the control group (p ⟨ 0.05). SA induced perceptible darkening after bleaching and should not be used to fill the pulp chamber. ST and CH show color stability and longevity after 12 months., (Copyright© 2024 Dennis Barber Ltd.)

Statement of Problem: Prefabricated and custom glass fiber posts have been successfully used to reconstruct endodontically treated teeth. However, the performance of computer-aided design and computer-aided manufacture (CAD-CAM) milled glass fiber posts is unclear., Purpose: The purpose of this systematic review with meta-analysis was to compare the fracture and bond strength and cement layer thickness of CAD-CAM milled glass fiber posts with prefabricated or custom glass fiber posts., Material and Methods: The protocol was registered in the Open Science Framework (http://osf.io/65jm7). Two reviewers searched the PubMed/MEDLINE, Web of Science, Embase, Scopus, and ProQuest databases for articles up to September 2023. In addition, the reference lists were hand searched. A meta-analysis was performed by using the RevMan 5.4 program. The risk of bias was assessed using the RoBDEMAT tool., Results: After screening, a total of 18 studies were included. The CAD-CAM milled glass fiber posts showed higher fracture strength (P=.02; Standardized Mean Difference [SMD]: 0.57; 95% Confidence Interval [CI]: 0.07 to 1.07), bond strength (P=.010; SMD: 1.07; 95% CI: 0.26 to 1.89), and lower cement layer thickness (P=.009; SMD: -2.94; 95% CI: -5.15 to -0.73) when compared with prefabricated glass fiber posts. However, fracture strength (P=.53; SMD: 0.38; 95% CI: -0.79 to 1.54) and bond strength (P=.90; SMD: -0.05; 95% CI: -0.81 to 0.72) were statistically similar between CAD-CAM milled and custom glass fiber posts. Significant and substantial heterogeneity was observed in all meta-analyzes (P<.01; I>60%). The studies sufficiently reported most domains related to bias, except for randomization of samples, sample size rationale and reporting and operator blinding., Conclusions: CAD-CAM milled and custom glass fiber posts provide an effective and safe option for restoring endodontically treated teeth, especially for weakened teeth or enlarged root canals. However, further well-designed clinical research is recommended to strengthen these findings., (Copyright © 2024 Editorial Council for The Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Context: Complementary procedures have been proposed to improve the endodontic retreatments., Aim: The aim of this study was to evaluate, by microcomputed tomography (micro-CT), the dentin wear caused by passive ultrasonic irrigation (PUI) and easy clean (EC) instruments, when used for the final removal of filling material during endodontic retreatment., Methods: Thirty-six mesial roots of the lower first molars were divided into four groups ( n = 9), according to the final irrigation and sealer: PUI/AH Plus, EC/AH Plus, PUI/Total Fill (TF), and EC/TF. Canal volume was evaluated, both before and after the final irrigation, by micro-CT analysis. The Kruskal-Wallis test was used to compare the volumes among groups and the paired Wilcoxon test was used to compare the volume values before and after the final irrigation within each group., Results: Both complementary cleaning procedures promoted dentin wear that was observed only when the volume was analyzed for each third of the root canal. In the apical third, both instruments showed significant wear, where the use of the EC instrument resulted in greater wear than the PUI, in teeth filled with both AH Plus and TF BC Sealers ( P < 0.05)., Conclusion: Both complementary cleaning procedures promoted dentin wear and must be used cautiously., Competing Interests: There are no conflicts of interest., (Copyright: © 2024 Journal of Conservative Dentistry and Endodontics.)

Aim: To assess the periapical alveolar bone pattern and the serum levels of proinflammatory cytokines, biochemical markers and metabolites in rats subjected to chronic alcohol and nicotine consumption and induced apical periodontitis., Methodology: Twenty-eight male Wistar rats were divided into four groups: Control, Alcohol, Nicotine and Alcohol+Nicotine. The alcohol groups were exposed to self-administration of a 25% alcohol solution, while the other groups were given only filtered water. The nicotine groups received daily intraperitoneal injections of a nicotine solution (0.19 μL of nicotine/mL), whereas the other groups received saline solution. Periapical lesions were induced by exposing the pulps of the left mandibular first molars for 28 days. After euthanasia, the mandibles were removed and the percentage bone volume, bone mineral density, trabecular thickness, trabecular separation and trabecular number of the periapical bone were measured using micro-computed tomography images. Serum samples were collected for analysis of proinflammatory cytokines (IL-1β, IL-4, IL-6 and TNF-α), biochemical and metabolomic analysis. Statistical analysis was performed with a significance level of 5%. Nonparametric data were analysed using the Kruskal-Wallis test followed by Dunn's test, while one-way anova followed by Tukey's test was performed for parametric data., Results: The groups exposed to alcohol or nicotine consumption exhibited an altered bone pattern indicating lower bone density and higher levels of IL-1β, IL-6 and TNF-α compared to the Control group (p < .05). Significant differences were observed among the groups in the levels of aspartate aminotransferase (AST), alanine aminotransferase (ALT), alkaline phosphatase, cholesterol, triglycerides, urea, creatinine, albumin, uric acid, bilirubin and calcium. Metabolomic analysis revealed significant differences in glycine, phosphocholine, lysine, lactate, valine, pyruvate and lipids (CH 2 CH 2 CO), n(CH 2 ) and n(CH 3 ). Most of these parameters were even more altered in the simultaneous consumption of both substances compared to single consumption., Conclusion: Alcohol and nicotine chronic consumption altered several metabolic markers, impaired liver and kidney function, increased the production of systemic proinflammatory mediators and harmed the periapical bone microarchitecture in the presence of apical periodontitis. The simultaneous consumption of alcohol and nicotine intensified these detrimental effects., (© 2023 British Endodontic Society. Published by John Wiley & Sons Ltd.)

This study evaluated unprepared canal areas, volume of dentine removal, and dentine thickness after the progressive enlargement of the buccal canals of 22 maxillary molars, with and without the MB2, using instruments with the same tip size (0.25 mm) but 4 different tapers (0.03, 0.05, 0.06 and 0.08 v). Micro-CT scans were performed after each instrument. Data were compared using a general linear mixed model post hoc comparisons with Kenward-Roger for Wald F tests (α = 5%). After each treatment step, it was observed an increase in the percentage volume of removed dentine and a decrease in the unprepared areas and dentine thickness at the pericervical region of all canals (p < 0.05). The percentage reduction of dentine thickness in MB2 canal was higher than in the mesiobuccal and distobuccal canals (p < 0.05). Knowledge of pre-operative dimensions and dentine thickness before enlargement of buccal canals of maxillary molars is an important factor to avoid excessive dentine removal., (© 2023 Australian Society of Endodontology Inc.)

This study assessed the influence of pH variation on the volumetric change of EndoSequence BC Sealer compared to AH Plus Jet. Eighteen single-rooted teeth were uniformly prepared and filled with one of the sealers. After 24-h storing, samples were scanned in a micro-CT device. Then, roots were immersed in 20 ml phosphate-buffered saline (PBS) with pH of 5, 7 or 12 at 37°C for 7 and 30 days and rescanned. Statistical analysis was performed using Shapiro-Wilk's test, one-way ANOVA and Tukey's or Student's t-tests (p < 0.05). Differences between sealers were observed only at neutral pH and after 30 days of acidic pH exposure, with a higher loss of EndoSequence (p < 0.05). After 7 days, alkaline pH reduced and increased the volumetric loss of EndoSequence and AH Plus, respectively, compared to neutral pH (p < 0.05). It can be concluded that the pH directly influenced the volumetric change of both tested root canal sealers in different ways., (© 2022 Australian Society of Endodontology Inc.)

Aim: This study aimed to evaluate the volumetric change of root canal sealers through micro-computed tomographic analysis using a novel in vivo model and to compare the results with those obtained using an ex vivo test., Methodology: Eighteen single-rooted teeth were cut to 5 mm length from the root apex. The root canals were uniformly enlarged and filled with EndoSequence BC Sealer or AH Plus Jet root canal sealers. Samples were stored at 37°C and 95% relative humidity for 24 h and then scanned with a micro-CT device. Twelve samples (n = 6 for each sealer) were implanted in the subcutaneous tissue of Wistar rats, while six samples (n = 3 for each sealer) were immersed in 20 mL of phosphate-buffered saline (PBS) at 37°C at neutral pH. After 7 and 30 days, teeth were removed from subcutaneous tissue or PBS and rescanned. Statistical analysis of volume changes was performed using Shapiro-Wilk's test and independent t-test (p < .05)., Results: AH Plus Jet had smaller volume changes (-2.2 to +0.77%) than EndoSequence BC Sealer (-2.0 to +4.0%) (p < .05), in the two tested models. The volume of the root canal sealers decreased over time (p < .05), in vivo. AH Plus Jet results varied between the in vivo and ex vivo results (p < .05), while EndoSequence BC Sealer presented similar volume losses for both experimental models (p > .05)., Conclusion: EndoSequence BC Sealer lost more volume than AH Plus Jet. The experimental conditions influenced the volumetric change of AH Plus Jet but not the EndoSequence BC Sealer. The ex vivo model should be further explored as a methodological alternative to assess the volumetric changes of root canal sealers without causing harm to animals., (© 2023 British Endodontic Society. Published by John Wiley & Sons Ltd.)

Objective: To assess the percentage of marginal gaps and voids in oval-shaped canals obturated by using two warm compaction techniques with a Bio-C sealer and AH Plus Jet., Materials and Methods: Forty canines with oval canals were scanned by microcomputed tomography (micro-CT), and root canal preparation was performed with an XP-endo Shaper system and irrigated with 5.25% sodium hypochlorite. Then, the specimens were paired into four groups (n=10) according to the root canal filling technique and endodontic sealer: Bio-C sealer and continuous wave of condensation, Bio-C sealer and Tagger's hybrid, AH Plus Jet and continuous wave of condensation, and AH Plus Jet and Tagger's hybrid. After root canal filling, a new scan was performed. The percentage of marginal gaps and voids was calculated with the ImageJ software, and the data were analyzed statistically using two-way ANOVA and Tukey tests, with a significance level of 5%., Results: The percentage of marginal gaps was significantly lower in the Bio-C sealer than in AH Plus Jet (p=0.021) regardless of the technique. However, no difference was found in the percentage of voids between root canal filling techniques and the endodontic sealer (p>0.05)., Conclusion: Both sealers and techniques demonstrated good quality of root canal filling. However, the use of the Bio-C sealer enhanced the filling ability by reducing marginal gaps, regardless of the root canal filling technique., Clinical Relevance: This study highlights the better performance of the Bio-C sealer in the quality of the root canal filling, reducing marginal gaps when compared to AH Plus Jet independent of the technique., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

This study evaluates the effect of two in-office bleaching agents with different compositions on the bond strength to enamel surface. Fifty bovine teeth were divided into five groups (n = 10 teeth per group), according to the bleaching agent used and the time elapsed to perform the restorative procedures: restorative procedures performed without bleaching (control group); bleaching with 35% hydrogen peroxide (HP), with restorative procedures 24 hours or 7 days after bleaching (HP/24h and HP/7d groups, respectively); and bleaching with 35% HP with calcium compost, with restorative procedures 24 hours or 7 days after bleaching (HP AutoMixx/24h and HP AutoMixx/7d groups, respectively). The specimens were stored at 37°C in artificial saliva. Restored teeth were submitted to a micro-shear bond strength test. The specimens were analyzed using a stereoscope to determine the fracture pattern, classified as adhesive, cohesive, or mixed. The results of the bond strength test were evaluated by analysis of variance, with significance set at P < .05. The groups showed similar bond strength values without significant difference among them (P > .05). There was a predominance of the adhesive-type fracture pattern in all groups. The bleaching agents with different compositions showed similar bond strength values when the restoration was performed 24 hours and 7 days after bleaching, and the results were similar to the control group.

Background: The present study assessed the quality of images and the presence of marginal gaps on cone-beam computed tomography (CBCT) images of teeth restored with all-ceramic and metal-ceramic crowns and compared the gap sizes observed on CBCT images with those obtained on micro-CT images., Methods: Thirty teeth restored with metal-ceramic and all-ceramic crowns, properly adapted and with gaps of 0.30 and 0.50 mm, were submitted to micro-CT and CBCT scans. Linear measurements corresponding to the marginal gap (MG) and the absolute marginal discrepancy (AMD) were obtained. The objective assessment of the quality of CBCT images was performed using the contrast-to-noise ratio (CNR), and the subjective assessment was defined by the diagnoses made by five examiners regarding the presence or absence of gaps., Results: The measurements were always higher for CBCT, with a significant difference regarding AMD. No significant difference in image quality was observed using CNR between the crowns tested. Low accuracy and sensitivity values could be observed for both crowns., Conclusion: Marginal mismatch measures were overestimated in CBCT images. No difference in image quality was observed between the crowns. The correct diagnosis of gaps was considered low, irrespective of crown type and gap size., Competing Interests: The authors do not have any financial interests in the companies whose materials are included in this article. The authors do not have any competing interests., (©2022 The Author(s).)

To evaluate and synthesize the evidence from the individual reviews that evaluated the efficacy of PDT therapy in root canal disinfection by undertaking an umbrella review. The protocol of the review was registered in the PROSPERO database under number CRD42021214056. The literature search was conducted using the following electronic databases: PubMed, Scopus, Web of Science, BVS, Cochrane Database of Systematic Reviews, Embase, and Epistemonikos, from inception to July 2021. Systematic reviews that evaluated the efficacy of PDT for root canal disinfection were included. Two authors independently performed a literature search, data extraction, and quality assessment of the included studies. Any disagreements were resolved by a third reviewer. The quality of the reviews was assessed using the AMSTAR 2 tool and the final categorization of each systematic reviews was classified as of "high," "moderate," "low," or "critically low" quality. Six systematic reviews were included in the current umbrella review and all of them were graded as critically low quality. From the critically low-quality evidence available, this umbrella review showed that the efficacy of PDT in root canal disinfection remains yet undetermined., (© 2022. The Author(s), under exclusive licence to Springer-Verlag London Ltd., part of Springer Nature.)

A root-end filling material is required to fill the root-end cavity without gaps or voids, to prevent root canal reinfection and to provide periapical healing. Thus, this study evaluated the volume of marginal gaps and voids of three root-end filling materials using microcomputed tomography (micro-CT). Thirty maxillary incisors were prepared and filled with gutta-percha and endodontic sealer. The specimens were scanned using micro-CT and distributed into three groups (n = 10): White MTA, MTA Repair HP, and Bio-C Repair. The root tips were resected at 90° to the longitudinal axis and the cavity (3 mm depth) was prepared with an ultrasonic tip. The materials were handled, and the cavities were filled. The specimens were rescanned and the percentual volume of gaps and voids were analyzed. The data were analyzed using Kruskal-Wallis and Dunn tests (p < .05). No statistical difference was found in the percentage of gaps among the tested materials (p > .05). White MTA presented less voids than Bio-C and MTA Repair HP (p < .05). The materials presented a similar percentual volume of gaps and White MTA presented less voids than other tested materials., (© 2021 Wiley Periodicals LLC.)

This study evaluated the ability of reciprocating glide path instruments to reach the full working length (RFWL). Thirty mesial roots of mandibular molars were matched into 2 groups (n = 15 teeth, 30 root canals), according to the system used for glide path: WaveOne Gold Glider (WOGG) and R-Pilot. The samples with fractured instruments or when it was not possible to RFWL were scanned using micro-computed tomography. Fractured instruments were also visualised through a scanning electron microscopy to verify the type of fracture. The parameters were compared statistically by Fisher's and chi-square tests (P < 0.05). No instrument fractures were observed in the R-pilot, while 2 fractures occurred in the WOGG group (P > 0.05). RFLW was achieved in 29 canals (96.66%) and 28 canals (93.33%) with R-pilot and WOGG instruments, respectively (P > 0.05). The instruments are able to RFWL in mesial canals of mandibular molars. WOGG showed two fractures while no R-Pilot instruments fractured., (© 2021 Australian Society of Endodontology Inc.)

This study aimed to evaluate the efficacy of supplementary methods to remove the remaining root filling material from root canals. Twenty mandibular single-rooted teeth were instrumented with Reciproc 25/0.08 and filled with gutta-percha and AH-Plus sealer, followed by a micro-CT scanning. The retreatment procedures were performed, the samples were rescanned and divided into two groups (n = 10) according to the supplementary method: XP-endo Finisher R and Clearsonic tip. The samples were rescanned and the volume of remaining root filling material was quantified. Data were analysed statistically (P < 0.05). The amount of filling material removed after supplementary methods was higher compared with retreatment procedure (P < 0.05). XP-endo Finisher R promoted a greater percentage of filling materials reduction in the entire root canal and apical third compared with Clearsonic tip (P < 0.05). Supplementary methods were effective in the reduction of root filling materials. XP-endo Finisher R removed more root filling material than Clearsonic tip., (© 2021 Australian Society of Endodontology Inc.)

The objective was to evaluate the shaping ability of XP-endo Shaper and Mtwo systems in oval-shaped canals preparation by microcomputed tomography (micro-CT) along the entire canal. The volume, surface area and percentage of unprepared area were evaluated by image processing in entire canal and apical third (5 mm). Apical transportation and centring ability were evaluated at 3, 5 and 7 mm from the apex. Forty single-canal oval canines were paired in two groups (n = 20) according to the instrumentation system: XP-endo Shaper and Mtwo. The teeth were scanned by micro-CT before and after instrumentation, using a thermal vat at 37°C. The XP-endo Shaper system was more effective in the instrumentation of oval-shaped canals when compared to Mtwo system, resulting in greater volume increases and lower percentage of unprepared canals walls in apical region. Regarding apical transportation and centring ability, no statistical difference was observed., (© 2020 Australian Society of Endodontology Inc.)

Objectives: The aim of this study was to evaluate the shaping ability of the TruShape and Reciproc Blue systems and the apical extrusion of debris after root canal instrumentation. The ProTaper Universal system was used as a reference for comparison., Materials and Methods: Thirty-three mandibular premolars with a single canal were scanned using micro-computed tomography and were matched into 3 groups ( n = 11) according to the instrumentation system: TruShape, Reciproc Blue and ProTaper Universal. The teeth were accessed and mounted in an apparatus with agarose gel, which simulated apical resistance provided by the periapical tissue and enabled the collection of apically extruded debris. During root canal preparation, 2.5% sodium hypochlorite was used as an irrigant. The samples were scanned again after instrumentation. The percentage of unprepared area, removed dentin, and volume of apically extruded debris were analyzed. The data were analyzed using 1-way analysis of variance and the Tukey test for multiple comparisons at a 5% significance level., Results: No significant differences in the percentage of unprepared area were observed among the systems ( p > 0.05). ProTaper Universal presented a higher percentage of dentin removal than the TruShape and Reciproc Blue systems ( p < 0.05). The systems produced similar volumes of apically extruded debris ( p > 0.05)., Conclusions: All systems caused apically extruded debris, without any significant differences among them. TruShape, Reciproc Blue, and ProTaper Universal presented similar percentages of unprepared area after root canal instrumentation; however, ProTaper Universal was associated with higher dentin removal than the other systems., Competing Interests: Conflict of Interest: No potential conflict of interest relevant to this article was reported., (Copyright © 2021. The Korean Academy of Conservative Dentistry.)

Recently, zinc-based materials have gained immense attention as antimicrobial agents. In this study, zinc-doped mesoporous hydroxyapatites (HAps) with various Zn contents were prepared by co-precipitation using a phosphoprotein as the porous template. The use of the phosphoprotein as the porous template resulted in the formation of zinc-doped mesoporous HAps (mHAps) with large pores and specific surface area (182 m 2 g -1 ), as indicated by the nitrogen adsorption/desorption measurements. The formation of the zinc-doped HAps was confirmed by various analytical techniques such as X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy. The biomaterials prepared in this study were used as antimicrobial agents against gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) bacteria. The Zn2%-mHAp sample showed the maximum bacterial inhibitory concentrations of 50 ± 5% and 77 ± 5% for the Gram-positive and Gram-negative bacteria, respectively. The antibacterial activity of the mHAp samples depended strongly on their Zn 2+ content. Thus, the use of a biotemplate and Zn 2+ ions is an efficient approach for the formation of novel HAp-based biomaterials with promising antibacterial properties. This synthesis approach will pave a new pathway for the functionalization of other materials for different biomedical applications., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Aim: To evaluate the influence of the location and design of endodontic access cavities on root canal shaping and filling ability, pulp chamber cleaning and fracture resistance of extracted human mandibular incisors., Methodology: After pre-selection using periapical radiographs, forty extracted intact human mandibular incisors were scanned in a micro-computed tomographic device. The teeth were matched based on similar anatomical features of the canals and assigned to four experimental groups (n = 10) according to the endodontic access cavity and root canal preparation protocol: traditional/TRUShape (T/TRU); traditional/MTwo (T/MT); minimally invasive/TRUShape (MI/TRU); and minimally invasive/MTwo (MI/MT). The samples were scanned after root canal instrumentation and filling procedures. The parameters evaluated were as follows: volume and area of the root canal, noninstrumented canal areas, canal transportation and centring ratio, accumulated hard tissue debris, voids in root canal fillings and remnants of root canal filling materials in the pulp chamber. After root canal filling and cavity restoration procedures, the samples were submitted to a fracture resistance test. Data were statistically analysed using Shapiro-Wilk, one-way anova and Bonferroni tests with a significance level of 5% (α = 0.05)., Results: There was no difference regarding all parameters evaluated before and after root canal preparation (volume and area of the root canal, noninstrumented canal areas, canal transportation and centring ratio, and accumulated hard tissue debris) amongst the groups (P > 0.05). MI/TRU and MI/MT groups were associated with significantly more voids in root canal fillings when compared to the T/TRU and T/MT groups (P < 0.05). Percentage of root canal filling material remnants in the pulp chamber after cleaning procedures and mean fracture resistance values were not significantly different amongst the four experimental groups (P > 0.05)., Conclusions: The location and design of the endodontic access cavity did not impact on root canal preparation nor resistance to fracture of extracted mandibular incisors, regardless of the instrument used. Minimally invasive access cavities were associated with significantly more voids in root canal fillings., (© 2020 International Endodontic Journal. Published by John Wiley & Sons Ltd.)

This study evaluated the antimicrobial effectiveness of 6.5% Vitis vinifera grape seed extract (GSE) against Enterococcus faecalis biofilm using confocal laser scanning microscopy (CLSM). Saline solution (SS), 5.25% sodium hypochlorite (NaOCl) and 2% chlorhexidine (CHX) were used for comparison. Dentin discs were inoculated with E. faecalis strain establishing a 3-week-old biofilm. Discs (n = 10) were exposed to 5.25% NaOCl, 2% CHX, 6.5% GSE and SS (negative control) for 10 min. Discs were stained with the fluorescent LIVE/DEAD-BacLight™ dye and analysed using CLSM. The proportion of dead cells in biofilm was analysed using one-way anova and Tukey tests (P < 0.05). A higher proportion of dead cells was found in GSE group compared with CHX and SS (P < 0.05). NaOCl group was associated with the highest proportion of dead cells (P < 0.05). GSE presented antimicrobial activity against E. faecalis; however, NaOCl was the most effective irrigant solution. GSE was more effective than CHX and SS., (© 2019 Australian Society of Endodontology Inc.)

Aim: To evaluate the influence of controlled memory (CM) thermal treatment on the torsional resistance and surface roughness of nickel-titanium instruments with identical geometric and dimensional characteristics. The influence of environmental temperature on torsional resistance was also evaluated., Methodology: A sample of 25 conventional NiTi alloy and 25 CM thermal-treated NiTi instruments, with an identical geometric design and a nominal size of 0.25 mm at D 0 and a nominal taper of .06 mm mm -1 were selected. The torsional strength and the angle of rotation of the instruments were tested following ISO 3630-1 at two temperatures: 21 and 35 °C. The fracture surfaces of all tested instruments were verified with a scanning electron microscope. The surface roughness of the blades of conventional NiTi alloy and CM wire files was evaluated by using a New View 7100 Profilometer. Statistical analysis was performed using Student's t-test and paired t-test to analyse the torsional resistance and surface roughness at a significance level of P < 0.05., Results: The torsional strength of thermally-treated instruments was significantly lower than nontreated instruments (P < 0.05). However, thermally-treated instruments had significantly greater angular rotation to fracture than nontreated instruments (P < 0.05). Temperature did not influence the torsional strength (P > 0.05) and the angular rotation (P > 0.05) of the instruments. Regarding the roughness measurements, groove depth was lower at the surface of thermally-treated instruments when compared to nontreated instruments (P < 0.05)., Conclusion: Thermal treatment influenced the torsional resistance and surface roughness of NiTi instruments with identical geometric and dimensional characteristics. Temperature did not affect torsional behaviour., (© 2019 International Endodontic Journal. Published by John Wiley & Sons Ltd.)

The aim of this study was to evaluate the root canal configuration of maxillary premolars using cone-beam computed tomography (CBCT). CBCT images of 999 maxillary premolars from a database were analysed to determine the frequency of the number of roots, root canals and Vertucci's classification. The associations among these variables were evaluated by Chi-square test (P < 0.05). In the first premolars, 42.2% of single-rooted teeth had a type II configuration, whereas 98.7% of 2-rooted teeth showed type IV. In the second premolars, type I was the most prevalent (49.9%). The presence of two roots was more prevalent in first premolars, and the presence of one root was more prevalent in second premolars (P < 0.05). Male patients had a higher percentage of two roots compared with female patients (P < 0.05). Type IV and I was more prevalent in first and second premolars respectively (P < 0.05). There was a high frequency of 2-rooted and single-rooted teeth among maxillary first and second premolars respectively., (© 2018 Australian Society of Endodontology Inc.)

This study evaluated the effect of previous irrigation with chlorhexidine (CHX) on the bond strength of a calcium silicate-based material, Biodentine, when used for furcal repair. Furcal perforations were produced in 30 extracted mandibular molars. Teeth were divided into 3 groups according to the irrigant used: distilled water (DW), CHX followed by DW (CHX), and CHX followed by ethylenediaminetetraacetic acid (EDTA) and DW (CHX/EDTA). Biodentine was used to repair the perforations. A push-out bond strength test was performed after 7 days, and data were statistically analyzed using Kruskal-Wallis and Dunn tests (P < 0.05). The CHX/EDTA group showed significantly lower values than the DW and CHX groups (P < 0.05). The failure mode of the DW group was mainly mixed, while that of the CHX group was cohesive. The CHX/EDTA group exhibited adhesive and mixed failures. Irrigation with CHX prior to furcation repair did not result in a statistically significant difference, compared to the use of DW, in the push-out bond strength of Biodentine., Competing Interests: The authors report no conflicts of interest pertaining to any of the products or companies discussed in this article.

Context: The lack of thorough knowledge regarding morphological and anatomical variations of the root canal system can result in failure to identify all root canals and lead to inadequate instrumentation and consequent failure of the endodontic treatment., Aims: The aim of the study was to evaluate the anatomy of single-rooted mandibular canines using micro-computed tomography (micro-CT)., Subjects and Methods: Eighty mandibular canines were scanned by micro-CT to determine anatomic parameters: Vertucci's classification, number of lateral canals, roundness, and minor and major diameters. The shape of root canal orifices, volume, surface area, and convexity structure model index (SMI) were also evaluated., Analysis Used: The CTAn and CTvol software were used to three-dimensional and morphometric analysis., Results: All canals were classified as Vertucci Type I. Lateral canals were verified in 42.4% of the roots, in apical third. The canal diameters were decreased near the apex. The cross sections at the cementoenamel junction and 1 mm from the apex were oval in 38.3% and 79.4% of the canals, respectively. The mean canal volumes and surface areas were 11.48 ± 4.41 mm 3 ≥ and 67.29 ± 19.18 mm 2 , respectively. The SMI values indicated that mandibular canine was approximately rod like., Conclusions: The morphology of the root canal of single-rooted canines varied widely at different root levels., Competing Interests: There are no conflicts of interest.

Introduction: The proximity of the roots of maxillary posterior teeth to the maxillary sinus floor can be associated with the development of chronic maxillary sinusitis (CMS). Therefore, this study evaluated the correlation between the presence of endodontic infection and periodontal disease in maxillary posterior teeth and the presence of CMS., Methods: A total of 83 patients (159 maxillary sinuses) were selected and underwent clinical dental examination to assess tooth mobility and pulp condition. In addition, cone-beam computed tomography was performed to evaluate the presence of periapical lesion and periodontal bone loss, and measure the distance from the root apex to the cortical of the maxillary sinus. The maxillary sinuses were divided into 2 groups: CMS and no maxillary sinusitis. Data were analyzed using χ 2 test and binary logistic regression analysis (P < .05)., Results: Periodontal disease was positively associated with CMS, leading to a 3.45-fold higher association between these disorders (P < .05). CMS was significantly more common in patients with periodontal disease or endodontic infection in close proximity with the maxillary sinus. Periodontal disease or endodontic infection that was more distant from the maxillary sinus was more common in patients with no maxillary sinusitis (P < .05). To the extent that the tooth is more distant from the maxillary sinus floor, the chance of presenting CMS is reduced up to 2.5-fold (P < .05)., Conclusion: Periodontal disease and proximity to the maxillary sinus are more common in cases of CMS, requiring a dental assessment and cone-beam computed tomography evaluation in patients with CMS with ineffective treatment., (Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

Objective: To evaluate the fracture resistance of different intra-radicular post systems in flared root canals., Methods: Sixty human canines were used. The coronal portion was removed and the root length was standardized at 17 mm. Canals were prepared and filled with gutta-percha/AH Plus sealer. Roots were embedded in self-polymerising acrylic resin blocks. According to the material used, the teeth were randomly divided into three groups (n=20): glass fibre post (GFP): GFP and Z350 resin composite core; pre-fabricated metal post (PMP): PMP and Z350 resin composite core; and cast metal core (CMC): CMC with silver-tin alloy. Coronal reconstruction involved fabrication of metal copings. Samples were submitted to mechanical compression testing at 45º in a universal test machine. Fracture pattern was evaluated under a stereoscope. The fracture strength values were submitted to one-way analysis of variance (ANOVA) and Tukey tests (α=0.05)., Results: There was no statistically significant difference between the resistance values among groups (P=0.193). With regard to fracture pattern, GFP showed 55% and PMP 45% of Type I fractures, which considered repairable or favourable, whereas MCC presented 50% of Type V, which was considered irreparable or unfavourable., Conclusion: Glass fibre and pre-fabricated metal posts have good fracture resistance to compression and may be used for restoring flared root canals, since they presented fractures mainly involving the filling core, thus facilitating later repair., Competing Interests: Conflict of Interest: No conflict of interest was declared by the authors., (Copyright: © 2020 European Endodontic Journal.)

Aim: To evaluate the resistance to vertical root fracture of root filled teeth using different root canal preparation concepts: apical stop and continuously tapering preparation, with different foraminal enlargement. In addition, the effect of filling associated with these different concepts was assessed., Methodology: Ninety single-rooted premolars were used. The crowns were removed to standardize the root length at 11 mm. Ten roots were not instrumented and not filled (control group). The other roots were divided into four groups (n = 20): apical stop to finishing file size 25, 0.08 taper; apical stop to finishing file size 45, 0.02 taper; continuously tapering preparation to finishing file size 25, 0.08 taper; and continuously tapering preparation to finishing file size 45, 0.02 taper. Afterwards, 10 roots of each group were root filled using Gutta-percha and AH Plus. A continuous wave of condensation was used as the filling technique. The roots were evaluated as regards resistance to vertical fracture using a universal testing machine. The data were evaluated using the Kruskal-Wallis and Mann-Whitney tests., Results: No significant difference in performance was observed between continuously tapering preparation size 25, 0.08 taper and apical stop size 45, 0.02 taper groups. Lower resistance values were found in continuously tapering preparation size 45, 0.02 taper group and the highest in apical stop size 25, 0.08 taper group. After filling, a significant increase in resistance values was observed in all groups. In addition, the continuously tapering preparation size 45, 0.02 taper group had values comparable with those of the control., Conclusion: The different canal preparation techniques reduced resistance to fracture when compared with the control group; however, after root filling, there was a significant increase in resistance., (© 2015 International Endodontic Journal. Published by John Wiley & Sons Ltd.)

Gag reflex is a physiologic mechanism that promotes contraction of the muscles of the tongue and pharyngeal walls. Different factors, including intraoral radiographic films and sensors, may trigger this reflex. Patients with severe gag reflex may not be able to tolerate the presence of intraoral radiographic films or sensors during root canal therapy (RCT). This factor may prevent an appropriate intraoral radiograph, which is important in RCT. Different approaches have been used to facilitate dental procedures in patients suffering from severe gag reflex. The use of an extraoral radiographic technique is an alternative method to obtain working length confirmation in patients with severe gag reflex. In this report of 2 cases, the use of an extraoral radiographic technique as an alternative approach during RCT in patients with severe gag reflex associated with phobic behavior and trismus was successfully demonstrated.