Search

To study the symmetry and asymmetry of the model error under multiplicative distortion measurement errors setting, we propose a correlation coefficient-based measure between the distribution function and the root of density function. The unknown distribution function and density function are estimated from four kinds of residuals: the conditional mean calibration-based residuals, the conditional absolute mean calibration-based residuals, the conditional variance calibration-based residuals, and the conditional absolute logarithmic calibration-based residuals. We study the asymptotic results of the estimators of correlation coefficient-based measure under four calibrations. Next, we consider statistical inference of the correlation coefficient-based measure by using the empirical likelihood method. The empirical likelihood statistics are shown to be an asymptotically standard chi-squared distribution. Simulation studies demonstrate the performance of the proposed estimators and test statistics. A real example is analyzed to illustrate its practical usage. [ABSTRACT FROM AUTHOR]

When analyzing GPS time series, common mode errors (CME) often obscure the actual crustal movement signals, leading to deviations in the velocity estimates of station coordinates. Therefore, mitigating the impact of CME on station positioning accuracy is crucial to ensuring the precision and reliability of GNSS time series. The current approach to separating CME mainly uses signal filtering methods to decompose the residuals of the observation network into multiple signals, from which the signals corresponding to CME are identified and separated. However, this method overlooks the spatial correlation of the stations. In this paper, we improved the Independent Component Analysis (ICA) method by introducing correlation coefficients as weighting factors, allowing for more accurate emphasis or attenuation of the contributions of the GNSS network's spatial distribution during the ICA process. The results show that the improved Weighted Independent Component Analysis (WICA) method can reduce the root mean square (RMS) of the coordinate time series by an average of 27.96%, 15.23%, and 28.33% in the E, N, and U components, respectively. Compared to the ICA method, considering the spatial distribution correlation of stations, the improved WICA method shows enhancements of 12.53%, 3.70%, and 8.97% in the E, N, and U directions, respectively. This demonstrates the effectiveness of the WICA method in separating CMEs and provides a new algorithmic approach for CME separation methods. [ABSTRACT FROM AUTHOR]

Aim: This study aimed to establish the shear wave measurement (SWM) cut‐off value for each fibrosis stage using magnetic resonance (MR) elastography values as a reference standard. Methods: We prospectively analyzed 594 patients with chronic liver disease who underwent SWM and MR elastography. Correlation coefficients (were analyzed, and the diagnostic value was evaluated by the area under the receiver operating characteristic curve. Liver stiffness was categorized by MR elastography as F0 (<2.61 kPa), F1 (≥2.61 kPa, <2.97 kPa, any fibrosis), F2 (≥2.97 kPa, <3.62 kPa, significant fibrosis), F3 (≥3.62 kPa, <4.62 kPa, advanced fibrosis), or F4 (≥4.62 kPa, cirrhosis). Results: The median SWM values increased significantly with increasing fibrosis stage (p < 0.001). The correlation coefficient between SWM and MR elastography values was 0.793 (95% confidence interval 0.761–0.821). The correlation coefficients between SWM and MR elastography values significantly decreased with increasing body mass index and skin–capsular distance; skin–capsular distance values were associated with significant differences in sensitivity, specificity, accuracy, or positive predictive value, whereas body mass index values were not. The best cut‐off values for any fibrosis, significant fibrosis, advanced fibrosis, and cirrhosis were 6.18, 7.09, 8.05, and 10.89 kPa, respectively. Conclusions: This multicenter study in a large number of patients established SWM cut‐off values for different degrees of fibrosis in chronic liver diseases using MR elastography as a reference standard. It is expected that these cut‐off values will be applied to liver diseases in the future. [ABSTRACT FROM AUTHOR]

The Federal Open Market Committee (FOMC) is a component of the Federal Reserve System responsible for overseeing open market operations. The FOMC meets roughly eight or more times per year to assess the economy of the United States. After each meeting, the FOMC releases a statement to the press outlining its assessment of the US economy and its monetary policy stance. The sentiment of these statements may have an influence on the US economy and financial markets. Using sentiment and correlational analyses, this research examines how the sentiment of these statements affects the US economy and financial markets by analyzing how FOMC statement sentiment is correlated with the Consumer Price Index (CPI), the National Financial Conditions Index (NFCI), and the Adjusted National Financial Conditions Index (ANFCI). We find evidence to suggest that there is a moderate negative correlation between an FOMC statement's sentiment and the US City Average CPI value associated with the month before and the month after the statement's release. We also find that there is no evidence to suggest there exists a correlation between an FOMC statement's sentiment and the NFCI value associated with the week before or the week after the statement's release. However, we do find evidence to suggest that there is a moderate negative correlation between an FOMC statement's sentiment and the ANFCI value associated with the week before and the week after the statement's release. We also found that out of the three models we tested (linear regression, vine copula regression, and Gaussian copula regression), the Gaussian copula regression model performs the best when forecasting the CPI and the ANFCI. Additionally, we find that when forecasting CPI values, the models that include FOMC statement sentiment are more accurate than the models that exclude FOMC statement sentiment. [ABSTRACT FROM AUTHOR]

Buckyballs are closed spherical carbon cages which are beneficial in several industries. Their chemical graphs provide structural invariants called topological invariants. This study is devoted to investigating the relation between degree-based topological index called Sombor index and physical properties of buckyballs. The sample contains buckyballs consisting of 54, 58, 60, 70, 74, 76, 78, 80, 82, 84, 86 and 90 carbon atoms.The topological indices with degree bases can be used to display the physical characteristics of buckyballs. The numerical values of topological indices describe the topological structure of a molecule. The physical properties include binding energy, Ramsauer–Townsend effect (RT-1, RT-2), shape resonances (SR-1, SR-2), and heat of formation of buckyballs. [ABSTRACT FROM AUTHOR]

The Dunhuang murals are a precious treasure of China's cultural heritage, yet they have long been affected by salt damage. Traditional methods for detecting salt content are costly, inefficient, and may cause physical harm to the murals. Among current techniques for measuring salt content in murals, hyperspectral remote sensing technology offers a non-invasive, circumventing issues of high costs, low efficiency. Building on this, the study constructs an inversion model for the Electrical Conductivity (EC) values of mural plaster subjected to phosphate erosion, through the integration of Fractional Order Differentiation (FOD), a novel three-band spectral index, and the Partial Least Squares Regression algorithm. The specific research contents include: (1) Initially, in preparation for the experiments, the materials used to create the samples underwent a rigorous desalting process, and phosphate solutions were prepared using deionized water to ensure uniform experimental conditions and the accuracy of the results. These meticulous preprocessing steps guaranteed that the measured EC values exhibited a clear correlation with the phosphate content. Subsequently, by employing qualitative experimental analysis techniques, this study was able to more accurately simulate the real-world scenarios of mural plaster affected by salt damage, enabling a deeper investigation into the mechanisms by which salts inflict microscopic damage to murals. (2) Explores the absorption mechanisms and characteristic spectral bands of the Electrical Conductivity (EC) values measured after the phosphate erosion of mural plaster. By integrating the optimal spectral indices, a univariate linear regression model is constructed, providing a basis for the rapid quantitative measurement of electrical conductivity in murals. (3) By comparing the accuracy of the Phosphate Simple Ratio (PSR) and Phosphate Normalized Difference Index (PNDI) spectral indices based on the linear regression model, the first six orders of the highest accuracy spectral index were selected as the optimal three-band spectral index combination, used as explanatory variables, with mural plaster electrical conductivity as the response variable, employing the PLSR method to construct the mural phosphate content high-spectral feature inversion model. The study's findings include: (1) Surfaces of samples deteriorated by phosphate erosion formed numerous irregularly shaped crystal clusters, exhibiting uneven characteristics. (2) By comparing the outcomes of different orders of fractional differentiation, it was found that the model performance reached its optimum at a 0.3 order of differentiation for both PSR and PNDI data, with a determination coefficient (Q2) of 0.728. (3) Utilizing PLSR, this study employed the previously determined optimal six-order three-band spectral index combination as explanatory variables, with salt content as the response variable, successfully constructing the high-spectral feature inversion model for mural electrical conductivity with a determination coefficient (Q2) of 0.815. This provides an effective technical means for monitoring the salt damage conditions of precious cultural heritage such as murals. [ABSTRACT FROM AUTHOR]

Linguistic expressions are widely used to reflect the decision maker's evaluations more easily and clearly in the decision-making problems, The Double Hierarchy Hesitant Fuzzy Linguistic Term Set (DHHFLTS), an extension of linguistic expressions, helps the decision maker to reflect their hesitant evaluations in complex decision making problems using two different sets of linguistic terms. Correlation measurements are used as an important tool in making decisions by making comparative evaluations in complex decision making problems based on common criteria. In this study, a new method is proposed to improve the existing correlation measurement method using DHHFLTSs. The proposed method aims to increase the reflective power of hesitant thoughts in the evaluation process by including fuzzy linguistic expressions in the calculation process. In order to prove the validity of the proposed method, the original problem of choosing the most suitable player for the positions in football sport is considered as a Multi-Attribute Decision Making (MADM) problem. Correlation values and assignment results obtained from the proposed method are compared with the current method values. Consistency of results and values between methods reveals the validity of the proposed method. [ABSTRACT FROM AUTHOR]

Chickpea (Cicer arietinum L.) is one of the crucial legume crops and a primary source of protein for human beings worldwide. The genetically diverse accessions are valuable sources for further improvement in chickpeas through breeding. In the presented study, the 36 chickpea lines from the Chickpea International Elite Nursery-Winter, International Center for Agricultural Research in the Dry Areas (ICARDA), bore assessment for yield-related traits. Determining the effects of various quantitative and yield-attributing traits on the seed yield used linear regression. Simple linear regression models ran separate evaluations for each studied parameter, including plant height, the height of the first pod, the number of secondary branches, the number of pods, the number of seeds per plant, and 100-seed weight. According to analysis for high seed productivity in chickpea cultivation under organic production conditions, the approximate model ensures a high yield as follows: The plant height ranged from 68 to –78 cm, height to the first pod (26–31 cm), number of secondary branches (8–14), number of pods (52–79), number of seeds (64–95), and 100-seed weight (25–45 g). In determining the seed productivity of chickpea genotypes, a direct positive and significant correlation occurred between the 100-seed weight and the number of seeds per plant. These parameters can serve as effective selection criteria for enhancing the chickpea yield. [ABSTRACT FROM AUTHOR]

Cotton is a valuable industrial fiber crop grown in many regions worldwide. Four cotton (Gossypium hirsutum L.) cultivars, i.e., Ishonch, Navbakhor-2, C-6524, and Tashkent-6, and their F1-2 diallel hybrids’ cultivation comprised a randomized complete block design with a factorial arrangement and four replications during 2019–2021 in the Tashkent Region, Uzbekistan. Significant (P ≤ 0.01) differences were notable among the parental genotypes and their F1 hybrids for boll weight and seed cotton yield. The parental cultivars Ishonch and Navbakhor-2 and their F1 diallel hybrids showed more stability and performed better than other genotypes. Broad-sense heritability estimates were the highest for boll weight and seed cotton yield while lowest for bolls per plant. Based on this trait’s yield, heritability, and variability, the inbreeding depression was positive in the F2 populations Ishonch × Navbakhor-2 and Navbakhor-2 × Tashkent-6. According to yield, the cultivars Ishonch, Navbakhor-2, and Tashkent-6 were outstanding as positive donors. [ABSTRACT FROM AUTHOR]

This research work extends the least squares criterion. The regression models which have been treated so far in the literature do not study multilinear relationships between variables. Such relationships are of a nonlinear nature. They take place whenever two or more than two univariate variables are the components of a multiple variable of order 2 or an order greater than 2. A multiple variable of order 2 is not a bivariate variable, and a multiple variable of an order greater than 2 is not a multivariate variable. A multiple variable allows for the construction of a tensor. The α -norm of this tensor gives rise to an aggregate measure of a multilinear nature. In particular, given a multiple variable of order 2, four regression lines can be estimated in the same subset of a two-dimensional linear space over R. How these four regression lines give rise to an aggregate measure of a multilinear nature is shown by this paper. In this research work, such a measure is an estimate concerning the expected return on a portfolio of financial assets. The metric notion of α -product is used to summarize the sampling units which are observed. [ABSTRACT FROM AUTHOR]

Complex interval-valued intuitionistic fuzzy sets not only consider uncertainty and periodicity semantics at the same time but also choose to express the information value with an interval value to give experts more freedom and make the solution to the problem more reasonable. In this study, we used the interval quaternion number space to generalize and extend the utility of complex interval-valued intuitionistic fuzzy sets, analyze their order relation, and offer new operations based on interval quaternion numbers. We proposed a new score function and correlation coefficient under interval quaternion representation. We applied the interval quaternion representation and correlation coefficient to a multi-criterion decision making model and applied the model to enterprise decisionmaking. [ABSTRACT FROM AUTHOR]

Background: The diagnosis and treatment monitoring of hepatitis C is quite challenging. The screening test, i.e. antibody assay, is unable to detect acute cases, while the gold standard hepatitis C virus (HCV) reverse transcriptase polymerase chain reaction (RTPCR) assay is not feasible in resource-limited countries such as India due to high cost and infrastructure requirement. European Association for the Study of the Liver and World Health Organization have approved a new marker, i.e. HCV core antigen (HCVcAg) assay, as an alternative to molecular assay. In this study, we have evaluated HCVcAg assay for diagnosis and treatment monitoring follow-up in Indian population infected with hepatitis C. Methods: Blood specimen of 90 clinically suspected cases of acute hepatitis C were tested simultaneously for anti-HCV antibody assay via ELISA (enzyme-linked immunoassay), HCVcAg assay by chemiluminescence immune assay (CLIA) and HCV RTPCR VL (viral load) assay. Thirty-four HCV RTPCR positive patients were further enrolled in treatment monitoring group whose blood samples were tested at the beginning of treatment, two weeks, four weeks and 12 weeks via HCV core Ag assay and HCV RTPCR Viral Load assay. Results: Considering HCV RTPCR as gold standard, diagnostic performance of HCV core Ag assay and anti-HCV antibody assay was evaluated. The sensitivity and specificity of HCV core Ag assay were higher than that of anti-HCV Antibody assay, i.e. 88.3% and 100% vs. 23.3% and 83.3%, respectively. The overall diagnostic accuracy of HCV core Ag assay was 92.20%. Among treatment follow-up group, HCV core Ag levels correlated well with HCV viral load levels, at the beginning of treatment (baseline) till 12 weeks showing highly significant Spearman rank correlation coefficient of > 0.9 with HCV viral load levels. Conclusions: HCV core Ag assay is a cost-effective, practically feasible substitute of HCV RTPCR viral load assay for diagnosis as well as long duration treatment monitoring of hepatitis C infection in resource-limited settings. [ABSTRACT FROM AUTHOR]

The multi-criteria decision-making (MCDM) field has long sought tools capable of adeptly capturing the intricacies of human decision-making amidst uncertainty. Hesitant fuzzy sets (HFS) have become a cornerstone in the MCDM field due to their ability to capture the intricacies of human decision-making under uncertainty. Nonetheless, we identified a significant gap in traditional HFS formulations, which often fail to fully harness the nuanced and implicit preferences of decision-makers (DMs). This shortcoming can lead to suboptimal decision outcomes in complex and uncertain environments. We introduce the normal wiggly hesitant fuzzy set (NWHFS), a novel construct that encapsulates both explicit and implicit preferences within a more representative framework. This study pioneers the development of new correlation coefficients for NWHFSs, offering a robust quantitative measure to elucidate the intricate relationships between variables. Our findings demonstrate that NWHFSs significantly enhance the MCDM process, providing a nuanced perspective that traditional HFS models cannot match. The proposed correlation coefficients not only reveal the concealed preferences of DMs but also broaden the decision-making spectrum, offering a more profound understanding of the relationships between alternatives and criteria. We illustrate the superiority of our approach through comparative analysis with existing methods, highlighting its ability to discern subtleties that other models overlook. Moreover, we integrate NWHFSs into clustering analysis, showcasing their potential to classify data sources with shared attributes effectively. This integration is particularly noteworthy for its ability to navigate complex datasets, offering a new dimension in data mining and resource retrieval. In essence, our study redefines the MCDM paradigm by introducing NWHFSs and their correlation coefficients, setting a new standard for decision-making accuracy and insight. The implications of our work extend beyond theory, offering practical solutions to real-world decision-making challenges. [ABSTRACT FROM AUTHOR]

Most current algorithms for multivariate time series classification tend to overlook the correlations between time series of different variables. In this research, we propose a framework that leverages Eigen-entropy along with a cumulative moving window to derive time series signatures to support the classification task. These signatures are enumerations of correlations among different time series considering the temporal nature of the dataset. To manage dataset's dynamic nature, we employ preprocessing with dense multi scale entropy. Consequently, the proposed framework, Eigen-entropy-based Time Series Signatures, captures correlations among multivariate time series without losing its temporal and dynamic aspects. The efficacy of our algorithm is assessed using six binary datasets sourced from the University of East Anglia, in addition to a publicly available gait dataset and an institutional sepsis dataset from the Mayo Clinic. We use recall as the evaluation metric to compare our approach against baseline algorithms, including dependent dynamic time warping with 1 nearest neighbor and multivariate multi-scale permutation entropy. Our method demonstrates superior performance in terms of recall for seven out of the eight datasets. [ABSTRACT FROM AUTHOR]

Aim: This study aimed to evaluate the diagnostic performance of attenuation measurement (ATT; dual‐frequency method) and improved algorithm of ATT (iATT; reference method) for the assessment of hepatic steatosis using magnetic resonance imaging (MRI)‐derived proton density fat fraction (PDFF) as the reference standard. Methods: We prospectively analyzed 427 patients with chronic liver disease who underwent ATT, iATT, or MRI‐derived PDFF. Correlation coefficients were analyzed, and diagnostic values were evaluated by area under the receiver operating characteristic curve (AUROC). The steatosis grade was categorized as S0 (<5.2%), S1 (≥5.2%, <11.3%), S2 (≥11.3%, <17.1%), and S3 (≥17.1%) according to MRI‐derived PDFF values. Results: The median ATT and iATT values were 0.61 dB/cm/MHz (interquartile range 0.55–0.67 dB/cm/MHz) and 0.66 dB/cm/MHz (interquartile range 0.57–0.77 dB/cm/MHz). ATT and iATT values increased significantly as the steatosis grade increased in the order S0, S1, S2, and S3 (p < 0.001). The correlation coefficients between ATT or iATT values and MRI‐derived PDFF values were 0.533 (95% confidence interval [CI] 0.477–0.610) and 0.803 (95% CI 0.766–0.834), with a significant difference between them (p < 0.001). For the detection of hepatic steatosis of ≥S1, ≥S2, and ≥S3, iATT yielded AUROCs of 0.926 (95% CI 0.901–0.951), 0.913 (95% CI 0.885–0.941), and 0.902 (95% CI 0.869–0.935), with significantly higher AUROC values than for ATT (p < 0.001, p < 0.001, p = 0.001). Conclusion: iATT showed excellent diagnostic performance for hepatic steatosis, and was strongly correlated with MRI‐derived PDFF, with AUROCs of ≥0.900. [ABSTRACT FROM AUTHOR]

Grasslands have been increasingly impacted by human activities, gradually becoming one of the most threatened ecosystems globally. Advanced geographic information technology and remote sensing techniques allow for a fresh perspective on studying the response of the grassland degradation index ( G D I ) to climate change. This study utilized remote sensing image data of grasslands to calculate the vegetation coverage and derive the G D I for five grassland regions of China from 2001 to 2019. The results indicate that the national degradation status of grasslands remained at a level of mild degradation. The increasing trend of the G D I in some regions was effectively inhibited by regional climate change, especially in the Northeastern and Northern Plain–Mountain–Hill Grassland regions, where the G D I showed a continuous decreasing trend. G D I was strongly correlated with atmospheric pressure, precipitation, temperature, and wind speed. In the arid northern region, the increasing precipitation and decreasing temperatures predominantly contributed to the depressed G D I . In the Qinghai–Tibetan Plateau Grassland region, the instability of the G D I is attributed to fluctuating atmospheric pressure, with a correlation coefficient ranging from 0.5 to 0.8. Our findings underscore the importance of meteorological factors to evaluate and forecast grassland ecosystem stability. This understanding is vital for developing informed conservation and management strategies to address current and future climate challenges. [ABSTRACT FROM AUTHOR]

We suggest novel correlation coefficients which equal the maximum correlation for a class of bivariate Lancaster distributions while being only slightly smaller than maximum correlation for a variety of further bivariate distributions. In contrast to maximum correlation, however, our correlation coefficients allow for rank and moment‐based estimators which are simple to compute and have tractable asymptotic distributions. Confidence intervals resulting from these asymptotic approximations and the covariance bootstrap show good finite‐sample coverage. In a simulation, the power of asymptotic as well as permutation tests for independence based on our correlation measures compares favorably with competing methods based on distance correlation or rank coefficients for functional dependence, among others. Moreover, for the bivariate normal distribution, our correlation coefficients equal the absolute value of the Pearson correlation, an attractive feature for practitioners which is not shared by various competitors. We illustrate the practical usefulness of our methods in applications to two real data sets. [ABSTRACT FROM AUTHOR]

In this research, the effectiveness of six element uniform circular uniform dipole array is designed. To determine the most productive design for the ISM Band, numerous array antenna topologies are tested in this work. The proposed antenna is appropriate for the ISM, IEEE 802.11, Bluetooth, as well as Zigbee, WiMAX, and WiFi applications. We first set up a 6-element dipole linear array for this, after which we switched to a rectangular array using a combination of triangular and rectangular lattice arrangements. The identical 6-element dipole antenna was then configured in a circular fashion, and the results appear to be excessively good when compared to all previous configurations. The symmetrical arrangement of a uniform circular array design allows the phasing of array antennas to operate azimuthally with little variation in its wavelength and side lobe intensities. There are 6 isotropic components in this uniform circular array design. To adjust the antenna to shifting surroundings, complicated values of the antennas array components are calculated. The correlation effect between various elements were analysed. In this work a return loss of – 35 dB was obtained as a maximum value for circular array configuration at 2.45 GHz. The goal of employing array antennas is to provide increased efficiency and broad band capabilities, allowing for usage in a variety of everyday applications. [ABSTRACT FROM AUTHOR]

An experiment was conducted to study the impact on mulberry leaf quality and silkworm growth performance by the application of growth promoter. In the irrigated mulberry field experiment was carried out in Randomized Block Design layout with four replications and five treatments. Result showed that higher quality of mulberry leaves was obtained on Effective Microorganisms (EM) treated plots compared to others because beneficial microorganism in the EM enhanced the plant growth metabolism to increase their growth. As for correlation analysis, all leaf quality traits were highly significantly positive correlated with silkworm cocoon traits. In simple linear regression analysis, the mulberry leaf quality traits were significantly influenced the silkworm cocoon traits except leaf protein with cocoon weight (Adj R² = - 0.30337) which has negative relationship between them. Highly close relationship was noticed on total carbohydrate content on larval weight (Adj R² = 0.93655) followed by total chlorophyll content on shell weight (Adj R² = 0.90569), silk gland weight (Adj R² = 0.87275), ERR (Adj R² = 0.84312) and total carbohydrate content on shell weight (Adj R² = 0.84606). Thus, the total chlorophyll and carbohydrate content might be a good trait and mostly responsible for producing good quality cocoons. [ABSTRACT FROM AUTHOR]

Aim: A validated RP-HPLC method was established for the quantification of Amlodipine and Metoprolol succinate according to ICH guidelines. Materials and Methods: This method utilized a Phenomenex (US) C18 column with dimensions of 250X4.6 mm I.D and a particle size of 5 µm. Employing an isocratic elution technique, the mobile phase comprised pH 3.0 phosphate buffer solution and acetonitrile. Detection occurred at a wavelength of 215 nm and a flow rate of 1 mL/min was chosen to ensure optimal resolution for Amlodipine and Metoprolol succinate. Results and Discussion: Retention times were noted at 3.137 min and 5.672 min for Amlodipine and Metoprolol succinate, respectively. High correlation coefficients were achieved (0.9995 for Amlodipine and 0.9996 for Metoprolol succinate). The method exhibited precision, with low relative standard deviations of 0.357% for Amlodipine and 0.077% for Metoprolol succinate. In summary, the RP-HPLC method developed was specific, linear, precise and robust. Conclusion: The devised method was validated in terms of accuracy, precision, linearity, specificity, robustness and ruggedness. All formulations' sample recoveries were in good accordance with the claims made on their labels. [ABSTRACT FROM AUTHOR]

Arc grounding faults occur frequently in the power grid with small resistance grounding neutral points. The existing arc fault identification technology only uses the fault line signal characteristics to set the identification index, which leads to detection failure when the arc zero-off characteristic is short. To solve this problem, this paper presents an arc fault identification method by utilizing integrated signal characteristics of both the fault line and sound lines. Firstly, the waveform characteristics of the fault line and sound lines under an arc grounding fault are studied. After that, the convex hull, gradient product, and correlation coefficient index are used as the basic characteristic parameters to establish fault identification criteria. Then, the logistic regression algorithm is employed to deal with the reference samples, establish the machine discrimination model, and realize the discrimination of fault types. Finally, simulation test results and experimental results verify the accuracy of the proposed method. The comparison analysis shows that the proposed method has higher recognition accuracy, especially when the arc dissipation power is smaller than 2 x 10³ W, the zero-off period is not obvious. In conclusion, the proposed method expands the arc fault identification theory. [ABSTRACT FROM AUTHOR]

In this paper, we develop the extended Weibull family of distributions to a bivariate class using the Farlie–Gumbel–Morgenstern copula. This is called the bivariate Farlie–Gumbel–Morgenstern extended Weibull family, and some of its properties are investigated. Some special cases of this family and their correlation coefficient are found. Also, the maximum correlation coefficient of most special cases is investigated. We study the concomitants of generalized order statistics from this new class of Morgenstern bivariate distribution and obtain some relevant relations for single and product moments of concomitants. Some well-known information measures such as the Shannon entropy and extropy for concomitants are derived. [ABSTRACT FROM AUTHOR]

The presented research covers a significant part of the period of the COVID-19 pandemic and studies the role of environmental factors in formation of population mortality from main causes. The main causes of mortality among the population of Odesa Region during the studied period include diseases of circulatory system, COVID-19, neoplasms, external causes, diseases of digestive organs and diseases of respiratory organs. The aforesaid causes constitute 94-95% of all causes of mortality in Odesa Region. However, out of these six classes of diseases, only diseases of circulatory system, COVID-19 and diseases of respiratory organs and some of their nosological forms have simultaneous peaks in mortality, during which mortality of the Odesa Region population from all causes almost doubles. Over time, there is a certain redistribution of frequency of the causes of mortality among the six main causing diseases of the population`s mortality in the region. But this does not explain occurrence of simultaneous peaks in mortality from diseases of circulatory system, COVID-19, and diseases of respiratory organs. Formation of simultaneous peaks in mortality from non-infectious and infectious diseases cannot be explained by the influence of social or anthropogenic factors. This indicates the need to address a number of environmental factors of natural origin – meteorological, biometeorological and heliocosmic. The study shows the possibility of an existing linear statistical connection between these environmental factors and the mortality of the Odesa Region population from such classes of diseases as diseases of circulatory system, COVID-19 and diseases of respiratory organs, as well as the relevant nosological forms. The results of the correlation analysis between mortality rates from major diseases and the environmental factors studied showed weak correlations between them. It is fully consistent with the World Health Organization's view of the role of environmental conditions in shaping public health.

Utilizing the European Centre for Medium-Range Weather Forecast (ECMWF) Reanalysis v5 (ERA5), for the first time, we have confirmed close links among Sudden Stratospheric Warmings (SSWs) in the Northern Hemisphere (NH), the polar vortices, and stratospheric Planetary Waves (PWs) by analyzing and comparing their trends. Interestingly, within overall increasing trends, the duration and strength of SSWs exhibit increasing and decreasing trends before and after the winter of 2002, respectively. To reveal possible physical mechanisms driving these trends, we analyzed the long-term trends of the winter (from December to February) polar vortices and of stratospheric PWs with zonal wave number 1. Notably, our results show that in all three time periods (the entire period of 41 winters, 1980 to 2020, and the two subperiods — 1980−2002 and 2002−2020) enhancing SSWs were always accompanied by weakening winter polar vortices and strengthening polar PWs like Stationary Planetary Waves (SPWs) and 16-day waves, and vice versa. This is the first proof, based on ERA5 long-term trend data, that weakening polar vortices and enhancing stratospheric PWs (especially SPWs) could cause an increase in SSWs.

Abstract The Dunhuang murals are a precious treasure of China’s cultural heritage, yet they have long been affected by salt damage. Traditional methods for detecting salt content are costly, inefficient, and may cause physical harm to the murals. Among current techniques for measuring salt content in murals, hyperspectral remote sensing technology offers a non-invasive, circumventing issues of high costs, low efficiency. Building on this, the study constructs an inversion model for the Electrical Conductivity (EC) values of mural plaster subjected to phosphate erosion, through the integration of Fractional Order Differentiation (FOD), a novel three-band spectral index, and the Partial Least Squares Regression algorithm. The specific research contents include: (1) Initially, in preparation for the experiments, the materials used to create the samples underwent a rigorous desalting process, and phosphate solutions were prepared using deionized water to ensure uniform experimental conditions and the accuracy of the results. These meticulous preprocessing steps guaranteed that the measured EC values exhibited a clear correlation with the phosphate content. Subsequently, by employing qualitative experimental analysis techniques, this study was able to more accurately simulate the real-world scenarios of mural plaster affected by salt damage, enabling a deeper investigation into the mechanisms by which salts inflict microscopic damage to murals. (2) Explores the absorption mechanisms and characteristic spectral bands of the Electrical Conductivity (EC) values measured after the phosphate erosion of mural plaster. By integrating the optimal spectral indices, a univariate linear regression model is constructed, providing a basis for the rapid quantitative measurement of electrical conductivity in murals. (3) By comparing the accuracy of the Phosphate Simple Ratio (PSR) and Phosphate Normalized Difference Index (PNDI) spectral indices based on the linear regression model, the first six orders of the highest accuracy spectral index were selected as the optimal three-band spectral index combination, used as explanatory variables, with mural plaster electrical conductivity as the response variable, employing the PLSR method to construct the mural phosphate content high-spectral feature inversion model. The study’s findings include: (1) Surfaces of samples deteriorated by phosphate erosion formed numerous irregularly shaped crystal clusters, exhibiting uneven characteristics. (2) By comparing the outcomes of different orders of fractional differentiation, it was found that the model performance reached its optimum at a 0.3 order of differentiation for both PSR and PNDI data, with a determination coefficient (Q2) of 0.728. (3) Utilizing PLSR, this study employed the previously determined optimal six-order three-band spectral index combination as explanatory variables, with salt content as the response variable, successfully constructing the high-spectral feature inversion model for mural electrical conductivity with a determination coefficient (Q2) of 0.815. This provides an effective technical means for monitoring the salt damage conditions of precious cultural heritage such as murals.

Currently, in pork auctions in Korea, only carcass weight and backfat thickness provide information on meat quantity, while the production volume of primal cuts and fat contents remains largely unknown. This study aims to predict the production of primal cuts in pigs and investigate how these carcass traits affect pricing. Using the VCS2000, the production of shoulder blade, loin, belly, shoulder picnic, and ham was measured for gilts (17,257 pigs) and barrows (16,365 pigs) of LYD (Landrace × Yorkshire × Duroc) pigs. Single and multiple regression analysis were conducted to analyze the relationship between the primal cuts and carcass weight. The study also examined the correlation between each primal cut, backfat thickness (1st thoracic vertebra backfat thickness, grading backfat thickness, and Multi-brached muscle middle backfat thickness), pork belly fat percentage, total fat yield, and auction price. A multiple regression analysis was conducted between the carcass traits that showed a high correlation and the auction price. After conducting a single regression analysis on the primal cuts of gilt and barrow, all coefficients of determination (R2) were 0.77 or higher. In the multiple regression analysis, the R2 value was 0.98 or higher. The correlation coefficient between the carcass weights and the auction price exceeded 0.70, while the correlation coefficients between the primal cuts and the auction prices were above 0.65. In terms of fat content, the backfat thickness of gilt exhibited a correlation coefficient of 0.70, and all other items had a correlation coefficient of 0.47 or higher. The correlation coefficients between the Forequarter, Middle, and Hindquarter and the auction price were 0.62 or higher. The R2 values of the multiple regression analysis between carcass traits and auction price were 0.5 or higher for gilts and 0.4 or higher for barrows. The regression equations between carcass weight and primal cuts derived in this study exhibited high determination coefficients, suggesting that they could serve as reliable means to predict primal cut production from pig carcasses. Elucidating the correlation between primal cuts, fat contents and auction prices can provide economic indicators for pork and assist in guiding the direction of pig farming.

Abstract The multi-criteria decision-making (MCDM) field has long sought tools capable of adeptly capturing the intricacies of human decision-making amidst uncertainty. Hesitant fuzzy sets (HFS) have become a cornerstone in the MCDM field due to their ability to capture the intricacies of human decision-making under uncertainty. Nonetheless, we identified a significant gap in traditional HFS formulations, which often fail to fully harness the nuanced and implicit preferences of decision-makers (DMs). This shortcoming can lead to suboptimal decision outcomes in complex and uncertain environments. We introduce the normal wiggly hesitant fuzzy set (NWHFS), a novel construct that encapsulates both explicit and implicit preferences within a more representative framework. This study pioneers the development of new correlation coefficients for NWHFSs, offering a robust quantitative measure to elucidate the intricate relationships between variables. Our findings demonstrate that NWHFSs significantly enhance the MCDM process, providing a nuanced perspective that traditional HFS models cannot match. The proposed correlation coefficients not only reveal the concealed preferences of DMs but also broaden the decision-making spectrum, offering a more profound understanding of the relationships between alternatives and criteria. We illustrate the superiority of our approach through comparative analysis with existing methods, highlighting its ability to discern subtleties that other models overlook. Moreover, we integrate NWHFSs into clustering analysis, showcasing their potential to classify data sources with shared attributes effectively. This integration is particularly noteworthy for its ability to navigate complex datasets, offering a new dimension in data mining and resource retrieval. In essence, our study redefines the MCDM paradigm by introducing NWHFSs and their correlation coefficients, setting a new standard for decision-making accuracy and insight. The implications of our work extend beyond theory, offering practical solutions to real-world decision-making challenges.

Breast cancer is perceived as the most common cause of mortality among women globally. Early detection of this disease is critical to reduce significantly the possibility of death. Machine learning techniques have been proved to be efficient and very successful for an accurate breast cancer diagnosis. In this paper, an efficient hybrid Feature Selection (FS) method named a Correlation technique-Modified Grey Wolf Optimizer (CMGWO) was proposed for accurate breast cancer classification based on dimensionality reduction. The suggested technique is based on two stages: the feature selection step and the classification step. Feature selection is the process of picking the most significant characteristics from a dataset. This stage is crucial in machine learning. Firstly, we focus on the filter method by using a Correlation technique for dimensionality reduction. This technique is intended to eliminate and reduce the number of features by selecting one feature from the other correlated features. Secondly, we use the Modified Grey Wolf Optimization algorithm (MGWO) to locate and determine the most significant features from uncorrelated features. After that, we use multiple classifiers to classify breast cancer disease based on the selected features. The Wisconsin Diagnostic Breast Cancer (WDBC) database was used to prove the performance of our proposed work. The experimental results show that the combination of the correlation method and MGWO for feature selection increases the accuracy rate of classification with a minimum number of features. The performances of different machine learning algorithms were evaluated, including Random Forest classifier (RF), Support Vector Machine (SVM) Classifier, and Naïve Bayes (NB) Classifier for the classification step. The suggested technique proves to be the best approach and reliable one among all studied approaches since it increases classification accuracy to 99.12\% obtained by CMGWO using Random Forest classifier and demonstrates its significance in detecting breast cancer.

Abstract Most current algorithms for multivariate time series classification tend to overlook the correlations between time series of different variables. In this research, we propose a framework that leverages Eigen-entropy along with a cumulative moving window to derive time series signatures to support the classification task. These signatures are enumerations of correlations among different time series considering the temporal nature of the dataset. To manage dataset’s dynamic nature, we employ preprocessing with dense multi scale entropy. Consequently, the proposed framework, Eigen-entropy-based Time Series Signatures, captures correlations among multivariate time series without losing its temporal and dynamic aspects. The efficacy of our algorithm is assessed using six binary datasets sourced from the University of East Anglia, in addition to a publicly available gait dataset and an institutional sepsis dataset from the Mayo Clinic. We use recall as the evaluation metric to compare our approach against baseline algorithms, including dependent dynamic time warping with 1 nearest neighbor and multivariate multi-scale permutation entropy. Our method demonstrates superior performance in terms of recall for seven out of the eight datasets.

Artificial neural networks, machine learning, and data preparation are normally implemented in a wide range of real-world problems, especially in geotechnical applications with optimistic prospects of accurate procedure outcomes. This technique has been utilized to precisely predict the top settlement of piles with various piles and soil parameters. Generally, the pile settlement is an essential requirement to produce a secure structure and has high-performance services. The current article presents the fitting of the artificial neural network (ANN) outcomes by calculating the coefficient of correlation R 2 between the predicted and the measured or calculated value of pile settlement. The ANN algorithm is developed using Python 3.9 IDLE and open-source libraries such as Keras, sklearn, Numpy, matplotlib, pandas, and Tensorflow. Because of random training and test performance, the model has been run at least ten times. The ANN model score and R 2 are compared for all runs in the testing phase. The higher score and R 2 values are chosen. Moreover, the Multivariate Linear Regression with the sklearn library is also offered in this article and utilized to produce a pile settlement formula by applying the same dataset used in ANN. The score and R 2 for choosing the first run of the ANN are 99.95% and 0.9631, respectively, while the correlation coefficient for the Multivariate Linear Regression in the training and testing phases is 0.972 and 0.919, respectively. Both techniques illustrate considerable results.

In the ABL wind tunnel, three inverted umbrella-shaped membrane structure groups were subjected to simultaneous pressure measurement model test. Time series of the fluctuating wind pressure were collected from 24 different wind angles. Upon examining the correlation coefficient of the fluctuating wind pressure between the upper and lower surfaces at the same pressure tap, it was discovered that the fluctuating wind pressure of the upwind roof exhibited asynchronous changes, which is a characteristic of a negative correlation area and has detrimental effects on the structure's wind resistance. The local areas with non-Gaussian properties were evaluated by analyzing the probability density function of representative pressure taps. The mechanism behind non-Gaussian wind pressure was elucidated through considerations of the central limit theorem and spatial correlation of fluctuating wind pressure. This study introduces a quantitative classification criterion for identifying the non-Gaussian distribution area of fluctuating wind pressure, setting the threshold at an 80% cumulative probability for both skewness and kurtosis. The analysis showed that the steady airflow of the structure corresponds to the Gaussian distribution area, while the non-Gaussian distribution area is primarily concentrated at the front edge of the upwind roof and the rear edge of the downwind roof. To ascertain the peak factor for the non-Gaussian distribution, the improved peak factor method was utilized, providing insights into the range of peak factor in the non-Gaussian distribution area of this particular roof configuration. This information serves as a foundation for the wind resistance design of this structure. [ABSTRACT FROM AUTHOR]

Analyzing correlated parameters can help water managers find and prove the cause of a water quality change. [ABSTRACT FROM AUTHOR]

Software evolution is an essential foundation in delivering technology that adapts to user needs and industry dynamics. In an era of rapid technological development, software evolution is not just a necessity, but a must to ensure long-term relevance. Developers are faced with major challenges in maintaining and improving software quality over time. This research aims to investigate the correlation between feature volatility and bug occurrence rate in software evolution, to understand the impact of dynamic feature changes on software quality and development process. The research method uses commit analysis on the dataset as a marker of bug presence, studying the complex relationship between feature volatility and bug occurrence rate to reveal the interplay in software development. Validated datasets are measured by metrics and correlations are measured by Pearson-productmoment analysis. This research found a strong relationship between feature volatility and bug occurrence rate, suggesting that an increase in feature changes correlates with an increase in bugs that impact software stability and quality. This research provides important insights into the correlation between feature volatility and bug occurrence rates, guiding developers and quality practitioners to develop more effective testing strategies in dynamic development environments. [ABSTRACT FROM AUTHOR]

Purpose: Grape (Vitis vinifera L.) is one of the most important horticultural products that are grown in different parts of Iran and has high nutritional values. In this study, the genetic diversity of cultivars and genotypes of some vineyards of Markazi province were investigated for the preliminary selection of superior cultivars and genotypes in terms of morphological and fruit characteristics for use in grape breeding programs. Research method: For this purpose, grouping and comparing 84 grape cultivars and genotypes were carried out using 70 traits including phenological and vegetative traits, trichome and stomata, bunch and berry traits. Findings: Based on the results, the “Sahebi Hazaveh” cultivar with 1000.17 g had highest an average bunch weight to compare other cultivars and genotypes. Results showed that, some traits such as bunch weight, bunch shoulders, fresh weight, rachis weight, the ratio of bunch weight to peduncle weight, the ratio of rachis weight to bunch weight, dry weight of bunch shoulders, length of the tail of bunch, berry weight, pedicel weight, seed weight and length of seed had a high coefficient of variation. Factor analysis reduced the evaluated traits to 10 main factors showed that they justified 78.38% of the total variance. Cluster analysis divided cultivars and genotypes into 4 main groups at five Euclidean distances. Limitations: No limitations were encountered. Originality/Value: This study indicated that grapes germplasm resources in zone are of noticeable diversities and can be promising for the utilization in the breeding programs. Based on the results, cultivars and genotypes of “Khalili Khondab” region, “Yaghouti”, “Sahebi”, “Fakhri”, “Kharvand” and “Kondori” Hazaveh region and “Sahebi” Aghbolagh region in leafing time, late flowering, sugar percentage, bunch and berry characteristics, stomatal density, standing and lying trichome density in leaves were superior to other cultivars and genotypes.

Verticillium dahliae is a broad host-range pathogen that causes vascular wilt in plants. The Verticillium wilt disease severity assay on plants caused by V. dahliae mainly includes two methods, one is a plant disease grade classification based on disease severity statistics [namely the disease index (DI)], and the other is the V. dahliae biomass quantification in plants (namely the fungal biomass). In this study, the relationships of pathogenicity with the DI, pathogenicity with the biomass, and the correlation analysis of the DI and relative fungal biomass were analysed. The results showed that pathogenicity assessment of V. dahliae strains using the DI method was able to give an intuitive reflection of the pathogenic ability for defoliating and non-defoliating strains; moreover, the method of quantitative PCR for fungal biomass also had high repeatability and stability. As a whole, the correlation coefficient between the DI and fungal biomass values of 28 strains was 0.728, indicating that the two data sets were highly correlated; however, the correlation coefficients of the defoliating strains and non-defoliating strains were only 0.5384 and 0.4547, respectively. In conclusion, the correlation coefficient between the DI and the fungal biomass presented high consistency, which could provide some meaningful exploration for the more accurate pathogenicity identification of V. dahliae.

Periodic abnormal power fluctuations of wind turbines can easily cause low-frequency oscillations of the power grid, threatening the safety of the power grid. Wind turbine power signals are nonlinear and non-stationary signals, and their abnormal fluctuation Frequencies are uncertain, which makes it difficult to extract and detect abnormal power fluctuation features. This paper proposes a method for detecting abnormal power fluctuations of wind turbine based on subband processing and correlation coefficient. For the application of this method, the author first removed trend items of the original power signal by high-pass filter, and decomposed the signal by the subband processing filter bank to obtain a series of subband signals; calculated the cross-correlation coefficient between the power signal with trend items removed and each subband signal respectively, located the subband where periodic abnormal fluctuation occurred and filtered useful subband according to cross-correlation coefficients; obtained high signal-to-noise ratio signal reconstructed based on the filtered subband signal; and by combining the peak detection method and the autocorrelation analysis method, identified the time period where periodic abnormal fluctuations of specific amplitude of the reconstructed signal, thus realizing the detection of periodic abnormal power fluctuations of wind turbine. Field data tests show that for periodic abnormal power fluctuations of different frequencies such as 0.06Hz and 0.32Hz, the proposed method can effectively identify the subband where periodic abnormal fluctuations occur and the periodic abnormal fluctuation characteristics.

Uncertainty in medical diagnosis is the main challenge in medical emergencies (MEs) experienced by triage nurses and physicians in the emergency department (ED). The intuitionistic fuzzy correlation coefficient (IFCC) approach is used to analyze and interpret the relationship between variables in an uncertain environment. Assorted methods that involve applying a correlation coefficient under intuitionistic fuzzy sets (IFSs) were constructed based on Pearson's correlation model with various drawbacks. In this work, we construct two new intuitionistic fuzzy correlation measures (IFCMs) based on Spearman's correlation model. It is demonstrated that the Spearman-based IFCMs are appropriate for measuring correlation coefficients without any drawbacks. In addition, we show that the Spearman-based IFCMs overcome all the shortcomings of the associated IFCC methods. Equally, the Spearman-based IFCMs satisfy the maxims of the correlation coefficient that have been delineated in the classical case of correlation coefficient. Due to the challenges that uncertainty in medical diagnosis pose to MEs and the proficiency of the IFCC approach, we discuss the application of the constructed IFCMs in a triage process for an effective medical diagnosis during an ME. The medical data for the triage process are obtained via a knowledge-based approach. Finally, comparative analyses are carried out to ascertain the validity and authenticity of the developed Spearman-based IFCMs relative to other IFCC approaches.

Abstract The relationship between two variables is an essential factor in statistics, and the accuracy of the results depends on the data collected. However, the data collected for statistical analysis can be unclear and difficult to interpret. One way to predict how one variable will change about another is by using the correlation coefficient (CC), but this method is not commonly used in interval-valued Pythagorean fuzzy hypersoft set (IVPFHSS). The IVPFHSS is a more advanced and generalized form of the Pythagorean fuzzy hypersoft set (PFHSS), which allows for more precise and accurate analysis. In this research, we introduce the correlation coefficient (CC) and weighted correlation coefficient (WCC) for IVPFHSS and their essential properties. To demonstrate the applicability of these measures, we use the COVID-19 pandemic as an example and establish a prioritization technique for order preference by similarity to the ideal solution (TOPSIS) model. The technique is used to study the problem of optimizing the allocation of hospital beds during the pandemic. This study provides insights into the importance of utilizing correlation measures for decision-making in uncertain and complex situations like the COVID-19 pandemic. It is a robust multi-attribute decision-making (MADM) methodology with significant importance. Subsequently, it is planned to increase a dynamic bed allocation algorithm based on biogeography to accomplish the superlative decision-making system. Moreover, numerical investigations deliberate the best decision structures and deliver sensitivity analyses. The efficiency of our encouraged algorithm is more consistent than prevalent models, and it can effectively control and determine the optimal configurations for the study.

Background: Identification is a crucial objective in autopsies, particularly when dealing with unknown, decomposed, or mutilated bodies. Various parameters are employed to establish the identity of a human being, and among them, stature holds significant importance in forensic casework. Stature estimation is pivotal in determining identity, especially when confronted with skeletal remains, fragmented bodies resulting from mass disasters, or mutilated corpses. Objectives: The main objective of the present study was to determine the relation between foot length and the stature of individual by using correlation coefficient in both sexes. To provide a linear regression model for estimation of stature from foot length in both males and females. Methodology: This cross-sectional study was conducted on 400 medical students aged between 20-25 years, studying at Andhra Medical College, Visakhapatnam, Andhra Pradesh, India. The length of both right and left foot from the posterior most part of the heel to the longest toe is taken using measuring tool and height of the individual is measured using standard scale and both are compared. Using all the data the study aims to establish a linear regression model for estimation of stature from foot length in both male and female. Conclusion: In all the groups, a significant and positive correlation between stature and foot length was established, and regression equations were derived for both the feet. An attempt was made to study the correlation between stature and foot length separately in both the sexes. However, owing to no significant difference in the results obtained, entire study sample was taken as a single unit for deriving the regression equation. In conclusion, the individual foot length proves to be useful for stature estimation, offering crucial support for forensic experts and anthropologists.

The present aimed to study the effects of phosphate (P) fertilizer levels (0, 40, and 80 kg P ha-1 ) on the growth and productivity of the Spanish and Turkish faba bean (Vicia faba L.) cultivars, carried out in 2021-2022 at the Kirkuk, Iraq. The results showed that 80 kg P ha-1 significantly influenced the growth and yield traits of faba bean, i.e., branches plant-1, pod length, pods plant-1, seeds plant-1, seeds’ weight pod-1, one-seed weight, 100-seed weight, seed yield plant-1, and seed yield ha-1 . The Turkish faba bean cultivar performed better than the Spanish cultivar for yield-related traits. Interaction between phosphorus fertilizer levels and cultivars influenced all studied traits substantially, except days to 50% flowering and plant height. Correlation analysis showed that seed yield was significantly and positively correlated with branches plant-1, pod length, pods plant-1, seeds pod-1, seeds plant-1, seed weight pod-1, one-seed weight, 100-seed weight, and seed yield plant-1 . Regression analysis indicated a strong relationship between seed yield and its components under phosphorus fertilizer levels. Turkish cultivar responded better to phosphorus fertilizer and performed superbly compared to Spanish cultivar. Therefore, the faba bean Turkish cultivar with 80 kg P ha-1 fertilization could be recommendable for getting higher faba-bean seed yield. [ABSTRACT FROM AUTHOR]

With the increasing use of digital images, it is essential to protect confidential image data from unauthorized access. In view of the security problems of digital image in the fields of communication, storage and transmission, this study proposes a digital envelope technology encryption scheme with high security and high speed based on the advantages of symmetric algorithm model and asymmetric algorithm model. This method is based on AES(Advanced Encryption Standard) and ECC(Elliptic Curve Cryptography), and optimized ECC hardware architecture is used for symmetric key sharing to enhance the security of the key. The traditional AES is optimized by adding pseudo- random numbers, using column shift instead of column obfuscation, and three dimensional Sbox box to maintain the Shannon diffusion and obfuscation principle while reducing the time complexity. This study the digital image encryption simulation and performance test of AES algorithm are carried out on FPGA (Field Programmable Gate Array). The test results show that the proposed encryption scheme has the advantages of rapidity, high security and effectiveness, and can better achieve image encryption. [ABSTRACT FROM AUTHOR]

Soil thermal conductivity (λ) is an important parameter in thermal calculation and temperature-field analysis in geotechnical engineering. To accurately predict it, this paper uses individual and ensemble machine learning methods to establish predictive models. The λ measurements were obtained (n = 337) and saturation, dry density, quartz content, sand content and clay content were selected as input parameters for the predictive models. The performance of the prediction model is evaluated by Inspection parameters. The predictive model was k-fold cross-validated and compared with traditional empirical models. The results show that individual and ensemble machine learning models accurately predict λ. The random forest model had the best predictive accuracy, with a correlation coefficient R2 = 0.979, root mean square error (RMSE) = 0.097 Wm−1 K−1 and mean absolute error (MAE) = 0.07 Wm−1 K−1. The MLR model had the worst predictive accuracy. The accuracy of ensemble machine learning models was obviously better than those of individual machine learning models. The accuracy of the proposed predictive model was significantly higher than that of the traditional empirical model. According to the results of performance tests and k-fold cross-validation, the RF and decision tree + bagging models are recommended for predicting λ. [ABSTRACT FROM AUTHOR]

The evaluation and monitoring of drought, a complex disaster, are essential issues for the planning of agricultural activities and the operation and management of water resources. In this study, the meteorological drought of the Black Sea region in northern Turkey is evaluated with the Standardized Precipitation Index (SPI) and Reconnaissance Drought Index (RDI) methods at 3-, 6-, and 12-month time scales. Meteorological parameters obtained between 1965 and 2019 from 28 meteorological observation stations are used to analyze the drought. Drought-wet period percentages, percentages of occurrence of drought classes, critical period, and negative peak index values are investigated. As a result of the study, it is observed that the percentage of drought occurrence at all time scales is higher than 50% at two stations in the study region, which received precipitation above the average of Turkey. The sum of the extreme drought (ED) and severe drought (SD) values throughout the region is approximately 15% for the whole area. There is a high correlation coefficient, 97.8, 97.6, and 97.3 for the 3-, 6-, and 12-month time scales, respectively, between the SPI and RDIst methods in the evaluation of meteorological drought in the Black Sea region, which is generally a rainy region. It is determined that with the increase in the time scale, the percentage of ED occurrence increased and the risk level of the region around RDI and 17089 station is the highest. It has been determined that the correlation between oscillation indices and meteorological drought indices for the Black Sea region is almost non-existent. The highest correlation value between the oscillation and meteorological drought indices in the region is obtained with the Atlantic Multidecadal Oscillation (AMO). [ABSTRACT FROM AUTHOR]

The heavy reliance on groundwater sources, the high cost and difficulties in accessing groundwater from a basement complex in Abeokuta necessitate the development of a simple prediction model. Hence, the objective of this paper was to develop a spatial model for prediction of the cost of constructing hand-dug wells in Abeokuta city, Nigeria, using geographic information systems. The static water level (SWL) of wells was measured across the city, and the digital terrain model (DTM) of the city was created in the GIS. Map algebra was applied to determine the depth and predict the overall cost of well construction. The map of the overburden removed was derived as the algebraic difference between the DTM and SWL extended down by the height of four concrete rings (OVERBURDEN = DTM - SWL+ 4 rings below the SWL). The map of the total cost of well construction in any part of the metropolis was produced by multiplying the sum of the cost of one unit of concrete ring and excavation of the depth of one concrete ring with the map of overburden. The model was validated by an empirical investigation of eight randomly selected wells. The results revealed relatively good accuracy, with correlation coefficients of 0.94, R2 values of 0.76, RMSE values of 0.27 and mean absolute percentage errors of 9.24 and 3.23 for the SWL and construction cost, respectively. The paper concludes that such spatial decision support is good for municipal water planning. [ABSTRACT FROM AUTHOR]

Uncertainty in medical diagnosis is the main challenge in medical emergencies (MEs) experienced by triage nurses and physicians in the emergency department (ED). The intuitionistic fuzzy correlation coefficient (IFCC) approach is used to analyze and interpret the relationship between variables in an uncertain environment. Assorted methods that involve applying a correlation coefficient under intuitionistic fuzzy sets (IFSs) were constructed based on Pearson's correlation model with various drawbacks. In this work, we construct two new intuitionistic fuzzy correlation measures (IFCMs) based on Spearman's correlation model. It is demonstrated that the Spearman-based IFCMs are appropriate for measuring correlation coefficients without any drawbacks. In addition, we show that the Spearman-based IFCMs overcome all the shortcomings of the associated IFCC methods. Equally, the Spearman-based IFCMs satisfy the maxims of the correlation coefficient that have been delineated in the classical case of correlation coefficient. Due to the challenges that uncertainty in medical diagnosis pose to MEs and the proficiency of the IFCC approach, we discuss the application of the constructed IFCMs in a triage process for an effective medical diagnosis during an ME. The medical data for the triage process are obtained via a knowledge-based approach. Finally, comparative analyses are carried out to ascertain the validity and authenticity of the developed Spearman-based IFCMs relative to other IFCC approaches. [ABSTRACT FROM AUTHOR]

Purpose: Grape (Vitis vinifera L.) is one of the most important horticultural products that are grown in different parts of Iran and has high nutritional values. In this study, the genetic diversity of cultivars and genotypes of some vineyards of Markazi province were investigated for the preliminary selection of superior cultivars and genotypes in terms of morphological and fruit characteristics for use in grape breeding programs. Research method: For this purpose, grouping and comparing 84 grape cultivars and genotypes were carried out using 70 traits including phenological and vegetative traits, trichome and stomata, bunch and berry traits. Findings: Based on the results, the "Sahebi Hazaveh" cultivar with 1000.17 g had highest an average bunch weight to compare other cultivars and genotypes. Results showed that, some traits such as bunch weight, bunch shoulders, fresh weight, rachis weight, the ratio of bunch weight to peduncle weight, the ratio of rachis weight to bunch weight, dry weight of bunch shoulders, length of the tail of bunch, berry weight, pedicel weight, seed weight and length of seed had a high coefficient of variation. Factor analysis reduced the evaluated traits to 10 main factors showed that they justified 78.38% of the total variance. Cluster analysis divided cultivars and genotypes into 4 main groups at five Euclidean distances. Limitations: No limitations were encountered. Originality/Value: This study indicated that grapes germplasm resources in zone are of noticeable diversities and can be promising for the utilization in the breeding programs. Based on the results, cultivars and genotypes of "Khalili Khondab" region, "Yaghoti", "Sahebi", "Fakhri", "Kharvand" and "Kondori" Hazaveh region and "Sahebi" Aghbolagh region in leafing time, late flowering, sugar percentage, bunch and berry characteristics, stomatal density, standing and lying trichome density in leaves were superior to other cultivars and genotypes. [ABSTRACT FROM AUTHOR]

Copyright of Industrial Minerals & Processing / Huagong Kuangwu yu Jiagong is the property of Industrial Minerals & Processing Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Cutaneous leishmaniasis (CL) is a zoonotic disease caused by protozoa of the Leishmania genus, transmitted by vectors from the Phlebotominae subfamily. The interaction between the vector, reservoir, and parasite is susceptible to climate change. This study explores how temperature and rainfall influenced the incidence of CL in 15 Colombian municipalities between 2017 and 2019. Epidemiological data were obtained from Colombia's Instituto Nacional de Salud, while climatological data came from the Instituto de Hidrología, Meteorología y Estudios Ambientales. Using Spearman's rank correlation coefficient, we examined the relationships between monthly climatic variables and the cumulative incidence of CL, considering various lag times. The data were further analyzed using Locally Weighted Scatterplot Smoothing (LOWESS). Our findings reveal both significant positive and negative correlations, depending on locality and climate variables. LOWESS analysis indicates that while rainfall-related incidence remains stable, temperature impacts incidence in a parabolic trend. This study underscores the significant yet complex influence of climatic factors on CL incidence. The insights gained could aid public health efforts by improving predictive models and crafting targeted interventions to mitigate the disease's impact, particularly in regions vulnerable to climate variability. [ABSTRACT FROM AUTHOR]

Simple Summary: The proper management of prostate cancer requires accurate assessment of patients diagnosed with prostate cancer, a common and often lethal cancer. Current conventional prostate cancer diagnosis relies on: (1) needle biopsy, which can result in side effects such as hemorrhage or infection, as well as misplacement of needles resulting in evaluation inaccuracy, (2) prostate serum antigen detection that can lead to overdiagnosis, or (3) MRI interpretations using the Prostate Imaging-Reporting and Data System (PI-RADS), which is a subjective method that depends on the experience of the radiologist's interpretation of the images. Quantitative analysis of MRI can alleviate the limitations of conventional approaches. Artificial intelligence applied to MRI requires big training datasets, and its application is restricted to patients scanned under certain restricted conditions. More recently, spectral/statistical techniques, adapted from remote sensing, have been applied and tested in spatially registered multi-parametric MRI. The new spectral/statistical techniques require limited training, are flexible regarding patient scanning conditions, and perform well relative to other techniques. This study extends spectral/statistical techniques to make them more independent of the individual radiologist by autonomously finding the appropriate tumor signature within a prostate and, therefore, providing an objective, non-invasive, accurate means for determining prostate tumor aggressiveness. Background: Accurate, reliable, non-invasive assessment of patients diagnosed with prostate cancer is essential for proper disease management. Quantitative assessment of multi-parametric MRI, such as through artificial intelligence or spectral/statistical approaches, can provide a non-invasive objective determination of the prostate tumor aggressiveness without side effects or potential poor sampling from needle biopsy or overdiagnosis from prostate serum antigen measurements. To simplify and expedite prostate tumor evaluation, this study examined the efficacy of autonomously extracting tumor spectral signatures for spectral/statistical algorithms for spatially registered bi-parametric MRI. Methods: Spatially registered hypercubes were digitally constructed by resizing, translating, and cropping from the image sequences (Apparent Diffusion Coefficient (ADC), High B-value, T2) from 42 consecutive patients in the bi-parametric MRI PI-CAI dataset. Prostate cancer blobs exceeded a threshold applied to the registered set from normalizing the registered set into an image that maximizes High B-value, but minimizes the ADC and T2 images, appearing "green" in the color composite. Clinically significant blobs were selected based on size, average normalized green value, sliding window statistics within a blob, and position within the hypercube. The center of mass and maximized sliding window statistics within the blobs identified voxels associated with tumor signatures. We used correlation coefficients (R) and p-values, to evaluate the linear regression fits of the z-score and SCR (with processed covariance matrix) to tumor aggressiveness, as well as Area Under the Curves (AUC) for Receiver Operator Curves (ROC) from logistic probability fits to clinically significant prostate cancer. Results: The highest R (R > 0.45), AUC (>0.90), and lowest p-values (<0.01) were achieved using z-score and modified registration applied to the covariance matrix and tumor signatures selected from the "greenest" parts from the selected blob. Conclusions: The first autonomous tumor signature applied to spatially registered bi-parametric MRI shows promise for determining prostate tumor aggressiveness. [ABSTRACT FROM AUTHOR]