Search

We demonstrate an iterative adaptive photon-counting compressive imaging system. The low-resolution image obtained from the previous sampling are used to calculate the wavelet coefficients. A method based on multiple micro-mirrors combination is proposed to conduct iterative adaptive sampling on the imaging regions corresponding to important children wavelet coefficients at all levels. In order to reconstruct a better quality image directly with appropriate compression ratio and time and avoid speculative selection of thresholds, an automatic threshold acquisition method based on wavelet entropy is proposed, which can automatically follows the change of the object image to obtain the threshold. The iterative adaptive compressive sensing measurement method based on wavelet entropy automatic threshold acquisition is applied to photon-counting compressive imaging system. Experimental results show that a high resolution image can be reconstructed with low compression ratio and short time in extremely low light environment, the quality of reconstructed images of iterative adaptive compressive sensing measurement is better than that of adaptive basis scan. [ABSTRACT FROM AUTHOR]

Sclerotinia sclerotiorum (Ss) is a devastating fungal pathogen that causes Sclerotinia stem rot in rapeseed (Brassica napus), and is also detrimental to mulberry and many other crops. A wild mulberry germplasm, Morus laevigata, showed high resistance to Ss, but the molecular basis for the resistance is largely unknown. Here, the transcriptome response characteristics of M. laevigata to Ss infection were revealed by RNA-seq. A total of 833 differentially expressed genes (DEGs) were detected after the Ss inoculation in the leaf of M. laevigata. After the GO terms and KEGG pathways enrichment analyses, 42 resistance-related genes were selected as core candidates from the upregulated DEGs. Their expression patterns were detected in the roots, stems, leaves, flowers, and fruits of M. laevigata. Most of them (30/42) were specifically or mainly expressed in flowers, which was consistent with the fact that Ss mainly infects plants through floral organs, and indicated that Ss-resistance genes could be induced by pathogen inoculation on ectopic organs. After the Ss inoculation, these candidate genes were also induced in the two susceptible varieties of mulberry, but the responses of most of them were much slower with lower extents. Based on the expression patterns and functional annotation of the 42 candidate genes, we cloned the full-length gDNA and cDNA sequences of the Ss-inducible chitinase gene set (MlChi family). Phylogenetic tree construction, protein interaction network prediction, and gene expression analysis revealed their special roles in response to Ss infection. In prokaryotic expression, their protein products were all in the form of an inclusion body. Our results will help in the understanding of the molecular basis of Ss-resistance in M. laevigata, and the isolated MlChi genes are candidates for the improvement in plant Ss-resistance via biotechnology. [ABSTRACT FROM AUTHOR]

Arabidopsis thaliana MYB43 (AtMYB43) is suggested to be involved in cell wall lignification. PtrMYB152, the Populus orthologue of AtMYB43, is a transcriptional activator of lignin biosynthesis and vessel wall deposition. In this research, MYB43 genes from Brassica napus (rapeseed) and its parental species B. rapa and B. oleracea were molecularly characterized, which were dominantly expressed in stem and other vascular organs and showed responsiveness to Sclerotinia sclerotiorum infection. The BnMYB43 family was silenced by RNAi, and the transgenic rapeseed lines showed retardation in growth and development with smaller organs, reduced lodging resistance, fewer silique number and lower yield potential. The thickness of the xylem layer decreased by 28%; the numbers of sclerenchymatous cells, vessels, interfascicular fibers, sieve tubes and pith cells in the whole cross section of the stem decreased by 28%, 59%, 48%, 34% and 21% in these lines, respectively. The contents of cellulose and lignin decreased by 17.49% and 16.21% respectively, while the pectin content increased by 71.92% in stems of RNAi lines. When inoculated with S. sclerotiorum, the lesion length was drastically decreased by 52.10% in the stems of transgenic plants compared with WT, implying great increase in disease resistance. Correspondingly, changes in the gene expression patterns of lignin biosynthesis, cellulose biosynthesis, pectin biosynthesis, cell cycle, SA- and JA-signals, and defensive pathways were in accordance with above phenotypic modifications. These results show that BnMYB43, being a growth-defense trade-off participant, positively regulates vascular lignification, plant morphology and yield potential, but negatively affects resistance to S. sclerotiorum. Moreover, this lignification activator influences cell biogenesis of both lignified and non-lignified tissues of the whole vascular organ. [ABSTRACT FROM AUTHOR]

The aim of this study was to investigate the effects of the heat treatment time and initial moisture content of bamboo on the corresponding chemical composition, crystallinity, and mechanical properties after saturated steam heat treatment at 180 °C. The mechanism of saturated steam heat treatment of bamboo was revealed on the micro-level, providing a theoretical basis for the regulation of bamboo properties and the optimization of heat treatment process parameters. XRD patterns of the treated bamboo slices were basically the same. With the increase in the initial moisture content of bamboo, the crystallinity of bamboo increased first and then decreased after treatment. Due to the saturated steam heat treatment, the content of cellulose and lignin in bamboo slices increased while the content of hemicellulose decreased, but the content of cellulose in bamboo with a 40% initial moisture content increased first and then decreased. The shear strength of treated bamboo changed little within 10 min after saturated steam heat treatment, and then decreased rapidly. During the first 20 min with saturated steam heat treatment, the compressive strength, flexural strength, and flexural modulus of elasticity of the treated bamboo increased, and then decreased. [ABSTRACT FROM AUTHOR]

The prion protein (PrPSc) has drawn widespread attention due to its pathological potential to cause prion diseases. Herein, we successfully synthesized Fe3C@C by carbonizing Fe3O4-lignin clusters, which were prepared through a facile hydrogen bonding interaction between ≡Fe-OH and hydroxyl groups of lignin. Our in-depth investigation confirmed that the composites were Fe3C@C core/shell particles. We constructed a novel sandwich surface plasmon resonance (SPR) detection assay for sensitive PrPSc detection, utilizing bare gold surface and aptamer-modified Fe3C@C (Fe3C@C-aptamer). Due to the highly specific affinity of Fe3C@C-aptamer towards PrPSc, the sandwich type SPR sensor exhibited excellent analytical performance towards the discrimination and quantitation of PrPSc. A good linear relationship was obtained between the SPR responses and the logarithm of PrPSc concentrations over a range of 0.1–200 ng/mL. The detection sensitivity for PrPSc was improved by ~10 fold compared with the SPR direct detection format. The required detection time was only 20 min. The specificity of the present biosensor was also confirmed by PrPC and other reagents as controls. This proposed approach could also be used to isolate and detect other highly pathogenic biomolecules with similar structural characteristics by altering the corresponding aptamer in the Fe3C@C conjugates. [ABSTRACT FROM AUTHOR]

We have developed a single photon compressive imaging system based on single photon counting technology and compressed sensing theory, using a photomultiplier tube (PMT) photon counting head as the bucket detector. This system can realize ultra-weak light imaging with the imaging area up to the entire digital micromirror device (DMD) working region. The measurement matrix in this system is required to be binary due to the two working states of the micromirror corresponding to two controlled elements. And it has a great impact on the performance of the imaging system, because it involves modulation of the optical signal and image reconstruction. Three kinds of binary matrix including sparse binary random matrix, m sequence matrix and true random number matrix are constructed. The properties of these matrices are analyzed theoretically with the uncertainty principle. The parameters of measurement matrix including sparsity ratio, compressive sampling ratio and reconstruction time are verified in the experimental system. The experimental results show that, the increase of sparsity ratio and compressive sampling ratio can improve the reconstruction quality. However, when the increase is up to a certain value, the reconstruction quality tends to be saturated. Compared to the other two types of measurement matrices, the m sequence matrix has better performance in image reconstruction. [ABSTRACT FROM AUTHOR]

We demonstrate a single-photon compressed imaging system based on single photon counting technology and compressed sensing theory. In order to cut down the measurement times and shorten the imaging time, a fast and efficient adaptive sampling method, suited for single-photon compressed imaging, is proposed. First, the pre-measured rough images are transformed into sparse bases as a priori information. Then a smart threshold matrix is designed by using large sparse coefficients of the rough image in sparse bases. The adaptive measurement matrix is obtained by modifying the original Gaussian random matrix with the specially designed threshold matrix. Building the adaptive measurement matrix requires only one level of sparse representation, which means that adaptive imaging can be achieved quickly with very little computation. The experimental results show that the reconstruction effect of the image measured using the adaptive measurement matrix is obviously superior than that of the Gaussian random matrix under different measurement times and different reconstruction algorithms. [ABSTRACT FROM AUTHOR]

With the rapid growth in the use of wireless electronic devices, society urgently needs electromagnetic wave (EMW) absorbing material with light weight, thin thickness, wide effective absorbing band width, and strong absorption capacity. Herein, the multi-layer magnetic composite boards are fabricated by hot-pressing magnetic fiber boards and normal veneer layer-by-layer. The magnetic fibers obtained using in-situ chemical co-precipitation are used to fabricate magnetic fiber board by hot-pressing. The magnetic wave absorbing capacities of the magnetic fiber boards obtained with 72 h impregnation time exhibit strongest adsorption capacities of −51.01 dB with a thickness of 3.00 mm. It is proved that this outstanding EMW absorption property is due to the strongest dielectric loss, the optimal magnetic loss, and the dipole relaxation polarization. Meanwhile, the EMW absorbing capacities of the corresponding multi-layer composite magnetic board increases from −14.14 dB (3-layer) to −60.16 dB (7-layer). This is due to the generated multi-interfaces between magnetic fiber board and natural wood veneer in the EMW propagation direction, which significantly benefit multireflection and attenuation of the incident waves. The results obtained in this work indicate that natural wood fibers are of great potential in the fabrication of magnetic multi-layer boards treated as EMW absorbers via a low cost, green, and scalable method. [ABSTRACT FROM AUTHOR]

Objective: The design and development of split memory alloy sternum bone plate are discussed, and the effect of split memory alloy sternum bone plate internal fixation in the treatment of sternal fractures are analysed., Methods: The structure of the product is designed according to the anatomy and physiological characteristics of human bones, and the cross section shape of the product is designed according to the cross section shape of human bones. Internal fixation is effective in the treatment of sternal fracture., Results: The split memory alloy sternal plate was successfully designed and developed, and all the patients with sternal fractures treated by internal fixation were clinically healed, the hospitalization and fracture healing time were significantly shortened, and no obvious complications occurred., Conclusions: The application of split memory alloy sternal plate internal fixation in the treatment of sternal fracture has the advantages of small trauma, simple operation, safety, reliable fixation, good histocompatibility and less complications, and is conducive to promoting fracture healing and respiratory function improvement.