Search

Flexible capacitive pressure sensors with a simple structure and low power consumption are attracting attention, owing to their wide range of applications in wearable electronic devices. However, it is difficult to manufacture pressure sensors with high sensitivity, wide detection range, and low detection limits. We developed a highly sensitive and flexible capacitive pressure sensor based on the porous Ecoflex, which has an aligned airgap structure and can be manufactured by simply using a mold and a micro-needle. The existence of precisely aligned airgap structures significantly improved the sensor sensitivity compared to other dielectric structures without airgaps. The proposed capacitive pressure sensor with an alignment airgap structure supports a wide range of working pressures (20–100 kPa), quick response time (≈100 ms), high operational stability, and low-pressure detection limit (20 Pa). Moreover, we also studied the application of pulse wave monitoring in wearable sensors, exhibiting excellent performance in wearable devices that detect pulse waves before and after exercise. The proposed pressure sensor is applicable in electronic skin and wearable medical assistive devices owing to its excellent functional features. [ABSTRACT FROM AUTHOR]

Electrohydrodynamic (EHD) printing was employed here to fabricate conductive micro patterns for printed electronic devices. EHD printing offers fine pattern fabrication through additive manufacturing that has several advantages when compared to conventional lithographic techniques. One of the major advantages of additive manufacturing is its ability to print on already fabricated devices for the purpose of alteration or repair. However, printing of micro patterns on a fabricated MEMS device is a tedious task due to the electrostatically induced disturbances in cone jet and the formation of satellite droplets. In this study, a modified EHD printing technique called drop on demand (DOD) process was used to print silver micro patterns on a MEMS device with high accuracy. The focus here was to optimize the technique and parameters, and modify the system hardware to enable patterning on an un-treated device surface. Parameters like supply voltage, waveform shape and frequency, pneumatic pressure, and ink flow rate have been studied and optimized to achieve repeatable and stable conductive patterns up to 3 μm. The modified EHD-DOD system also eliminates the problem of static surface charges by using low voltage thus enabling printing of highly repeatable sub-10 μm conductive patterns well suitable for MEMS repair. [ABSTRACT FROM AUTHOR]

Organic–inorganic hybrid nanocomposites are an attractive choice for various electronic device applications. Owing to the unique characteristics of hybrid nanocomposites, we have explored the memory effect in a device, based on a 2D material: boron nitride (BN) and a polymer, polyvinyl alcohol (PVOH). This memory device has been fabricated on a flexible ITO coated PET substrate by using an all printed approach including electrohydrodynamic atomization (EHDA) and reciprocating head (RPC). The fabricated device displayed nonvolatile, rewritable and characteristic bipolar resistive switching at a low current compliance and small operating voltage. The conduction mechanism was deduced to be conductive filamentary and verified by the effect of temperature and device size on switching characteristics. Raman, FTIR and UV/Vis spectroscopies were employed in studying the optical properties of as-deposited hBN/PVOH thin films. The morphological characteristics were analyzed by FESEM and AFM techniques. A bendability test at various bending diameters (50–4 mm) for 1500 cycles was carried out to show the mechanical robustness of the fabricated device. The remarkably stable and repeatable results of electrical and mechanical characterization make this hybrid nanocomposite a potential candidate for future flexible, robust and low power nonvolatile memory devices. [ABSTRACT FROM AUTHOR]

Soft actuators with complex range of motion lead to strong interest in applying devices like biomedical catheters and steerable soft pipe inspectors. To facilitate the use of soft actuators in devices where controlled, complex, precise, and fast motion is required, a structurally controlled Omni directional soft cylindrical actuator is fabricated in a modular way using multilayer composite of polylactic acid based conductive Graphene, shape memory polymer, shape memory alloy, and polyurethane. Multiple fabrication techniques are discussed step by step that mainly include fused deposition modeling based 3D printing, dip coating, and UV curing. A mathematical control model is used to generate patterned electrical signals for the Omni directional deformations. Characterizations like structural control, bending, recovery, path, and thermal effect are carried out with and without load (10 g) to verify the new cylindrical design concept. Finally, the application of Omni directional actuator as a steerable catheter is explored by fabricating a scaled version of carotid artery through 3D printing using a semitransparent material.

The detection of West Nile virus (WNV) in areas endemic for Japanese encephalitis virus (JEV) is complicated by the extensive serological cross-reactivity between the two viruses. A testing algorithm was developed and employed for the detection of anti-WNV antibody in areas endemic for JEV. Using this differentiation algorithm, a serological survey of poultry (2004 through 2009) and horses (2007 through 2009) was performed. Among 2681 poultry sera, 125 samples were interpreted as being positive for antibodies against JEV, and 14 were suspected to be positive for antibodies against undetermined flaviviruses other than WNV and JEV. Of the 2601 horse sera tested, a total of 1914 (73.6%) were positive to the initial screening test. Of these positive sera, 132 sera (5.1%) had been collected from horses that had been imported from the United States, where WNV is endemic. These horses had WNV vaccination records, and no significant pattern of increasing titer was observed in paired sera tests. Of the remaining 1782 positive sera 1468 sera (56.4%) were also found to contain anti-JEV antibodies, and were interpreted to be JEV-specific antibodies by the differentiation algorithm developed in this study. The remaining 314 horses (12.1%) for which a fourfold difference in neutralizing antibody titer could not be demonstrated, were determined to contain an antibody against an unknown (unidentified or undetermined) flavivirus. No evidence of WNV infections were found during the period of this study.

Recent global warming trends may have a significant impact on vector-borne viral diseases, possibly affecting vector population dynamics and disease transmission. This study measured levels of hemagglutination-inhibition (HI) antibodies against Japanese encephalitis virus (JEV) and neutralizing antibodies against Akabane virus (AKAV) and Aino virus (AINV) for Thoroughbred horses in Korea. Blood samples were collected from 989 racehorses in several provinces, between October 2005 and March 2007. Sera were tested using either an HI assay or a virus neutralization test. Approximately half (49.7%; 492/989) of the horses tested were antibody-positive for JEV. The HI titer against JEV was significantly correlated with racehorse age (p < 0.05). Horses with an HI antibody titer of 1 : 160 or higher accounted for 3.9% of the animals tested, indicating that vectors transmitting arthropod- borne viruses bit relatively few horses. In contrast, 3.8% (19/497) and 19.5% (97/497) of horse sera collected in March 2007 were positive against AKAV and AINV, respectively. The presence of antibodies against AKAV and AINV may indicate the multiplication of AKAV and AINV in these horses.

A total of 384 Thoroughbred mares were investigated to determine and evaluate the features of early embryonic death at nine equine farms on Jeju Island, South Korea, from 2001 to 2003. Overall, 771 matings for 384 mares resulted in 376 pregnancies 15 days after ovulation. Subsequently, 12.2% (46/376) of these early conceptuses were lost within 45 days after ovulation. Furthermore, about three quarters of the 46 embryonic deaths occurred between 16 and 25 days after ovulation. The incidence of embryonic death was highest in the barren (17.2%), more than 15 years old (15.4%), and more than 10 parities (18.2%) groups compared with the other groups (9.1-16.9%). Mares mated in March, April, and during the first estrus postpartum had higher embryonic death rates, (19.6%, 17.2%, and 24.6%, respectively). Mares with abnormal fluid and cysts in the uterus (18.0%) or multiple embryonic vesicles (23.1%) had higher embryonic death rates than those with normal uterine conditions (9.8%) or single embryonic vesicles (10.5%). The condition of mares, such as breeding condition and the environment of the embryo or fetus, are the major factors in relation to occurrence of early embryonic death.