Search

Within the Northern Calcareous Alps (NCA) fold-and-thrust belt of the Eastern Alps, multiple pre-shortening deformation phases have contributed to the structural grain that controlled localization of deformation at later stages. In particular, Jurassic rifting and opening of the Alpine Tethys led to the formation of extensional basins at the northern margin of the Apulian plate. Subsequent Cretaceous shortening within the Northern Calcareous Alps produced the enigmatic Achental structure, which forms a sigmoidal transition zone between two E–W-striking major synclines. One of the major complexities of the Achental structure is that all structural elements are oblique to the Cretaceous direction of shortening. Its sigmoidal form was, therefore, proposed to be a result of forced folding at the boundaries of the Jurassic Achental basin. This study analyses the structural evolution of the Achental structure through integrating field observations with crustal-scale physical analogue modelling to elucidate the influence of pre-existing crustal heterogeneities on oblique basin inversion. From brittle–ductile models that include a weak basal décollement, we infer that oblique shortening of pre-existing extensional faults can lead to the localization of deformation at the pre-existing structure and predicts thrust and fold structures that are consistent with field observations. Consequently, the Achental low-angle thrust and sigmoidal fold train was able to localize at the former Jurassic basin margin, with a vergence opposite to the controlling normal fault, creating the characteristic sigmoidal morphology during a single phase of NW-directed shortening. [ABSTRACT FROM AUTHOR]

The Barents Shear Margin separates the Svalbard and Barents Sea from the North Atlantic. During the break-up of the North Atlantic the plate tectonic configuration was characterized by sequential dextral shear, extension, and eventually contraction and inversion. This generated a complex zone of deformation that contains several structural families of overlapping and reactivated structures. A series of crustal-scale analogue experiments, utilizing a scaled and stratified sand–silicon polymer sequence, was used in the study of the structural evolution of the shear margin. The most significant observations for interpreting the structural configuration of the Barents Shear Margin are the following. Prominent early-stage positive structural elements (e.g. folds, push-ups) interacted with younger (e.g. inversion) structures and contributed to a hybrid final structural pattern. Several structural features that were initiated during the early (dextral shear) stage became overprinted and obliterated in the subsequent stages. All master faults, pull-apart basins, and extensional shear duplexes initiated during the shear stage quickly became linked in the extension stage, generating a connected basin system along the entire shear margin at the stage of maximum extension. The fold pattern was generated during the terminal stage (contraction–inversion became dominant in the basin areas) and was characterized by fold axes striking parallel to the basin margins. These folds, however, strongly affected the shallow intra-basin layers. The experiments reproduced the geometry and positions of the major basins and relations between structural elements (fault-and-fold systems) as observed along and adjacent to the Barents Shear Margin. This supports the present structural model for the shear margin. [ABSTRACT FROM AUTHOR]

Polyphase deformation of continental crust is analysed through physical analogue models for settings wherein platform–basin geometries at passive continental margins are subject to subsequent shortening and orogenesis. In a first stage, segmentation of the brittle and brittle–ductile models into basins and platforms is achieved by extension. Basins are partly filled with brittle material to allow for a strength difference between basin and platform realms, simulating relatively weaker, incompetent deposits of grabens surrounded by competent pre-rift basement or carbonate platform rock, respectively. In a second stage of deformation, contraction parallel and oblique (10 to 20 ∘) to the basin axes has been applied, leading to the inversion of basins formed earlier. The experiments show that strength contrasts across platform–basin transitions control the localisation and overall style of compressional deformation, irrespective of the nature of the basal décollement (frictional versus viscous), the rheology of the basin fill, or changing platform–basin thickness ratios. Orientations of thrust faults change laterally across inherited platform–basin transitions throughout all experiments; higher obliquity of basin inversion leads to stronger alignment of thrust curvature with the orientation of pre-existing rift axes. At individual thrust faults, variations in the strike of thrust fronts are accompanied by changes in the shortening direction during incremental phases of deformation. Reactivation of normal faults occurs in oblique basin inversion settings only, favourably at platform–basin transitions where the normal faults face the shortening direction. The amount and style of fault reactivation depend on the material used. Our experiments are relevant for natural cases such as the Dolomites Indenter of the eastern Southern Alps, underlining the importance of inherited geologic features for the subsequent shortening geometries. Field structural data from the western segment of the Belluno thrust of the Valsugana fault system support predicted variations of thrust fault orientation and a lateral change in shortening direction (from SSW to SSE along-strike) along one single fault. Based on our modelling results, we suggest that this variability of thrust fault orientation and shortening directions, controlled by inherited structures, is consistent with strain partitioning during a single phase of deformation and does not necessarily reflect different deformation phases. [ABSTRACT FROM AUTHOR]

Within the Northern Calcareous Alps fold-and-thrust belt of the Eastern Alps, multiple deformation phases have contributed to the structural grain that localised deformation at later stages. In particular, Jurassic rifting and opening of the Alpine Tethys led to the formation of extensional basins at the northern margin of the Apulian plate. Subsequent Cretaceous shortening within the Northern Calcareous Alps produced the enigmatic Achental structure, which forms a sigmoidal transition zone between two E-W striking major synclines. One of the major complexities of the Achental structure is that all structural elements are oblique to the Cretaceous direction of shortening. It was therefore proposed to be a result of forced folding at the boundaries of the Achental basin. This study analyses the structural evolution of the Achental structure through integrating field observations with crustal-scale physical analogue models, to elucidate the influence of pre-existing crustal heterogeneities on oblique basin inversion and the prerequisites for the formation of a sigmoidal hanging wall that outlines former basin margins. From brittle-ductile models, we infer that shortening oblique to pre-existing extensional faults can lead to the localisation of thrust faults at the existing structure within a single deformation phase. Prerequisites are 1) a weak basal décollement that is offset by an existing normal fault, 2) the presence of topography in the hinterland, 3) a thin-skinned deformation style. Consequently, the Achental low-angle thrust and corresponding folds was able to localise exactly at the basin margin, with a vergence opposite to the Jurassic normal fault, creating the characteristic sigmoidal morphology during a single phase of NWdirected shortening. [ABSTRACT FROM AUTHOR]

Within the Northern Calcareous Alps fold-and-thrust belt of the Eastern Alps, multiple deformation phases have contributed to the structural grain that localised deformation at later stages. In particular, Jurassic rifting and opening of the Alpine Tethys led to the formation of extensional basins at the northern margin of the Apulian plate. Subsequent Cretaceous shortening within the Northern Calcareous Alps produced the enigmatic Achental structure, which forms a sigmoidal transition zone between two E-W striking major synclines. One of the major complexities of the Achental structure is that all structural elements are oblique to the Cretaceous direction of shortening. It was therefore proposed to be a result of forced folding at the boundaries of the Achental basin. This study analyses the structural evolution of the Achental structure through integrating field observations with crustal-scale physical analogue models, to elucidate the influence of pre-existing crustal heterogeneities on oblique basin inversion and the prerequisites for the formation of a sigmoidal hanging wall that outlines former basin margins. From brittle-ductile models, we infer that shortening oblique to pre-existing extensional faults can lead to the localisation of thrust faults at the existing structure within a single deformation phase. Prerequisites are 1) a weak basal décollement that is offset by an existing normal fault, 2) the presence of topography in the hinterland, 3) a thin-skinned deformation style. Consequently, the Achental low-angle thrust and corresponding folds was able to localise exactly at the basin margin, with a vergence opposite to the Jurassic normal fault, creating the characteristic sigmoidal morphology during a single phase of NW-directed shortening. [ABSTRACT FROM AUTHOR]

Polyphase deformation of continental crust is analysed through physical analogue models for settings where platform-basin geometries at passive continental margins are subject to subsequent shortening and orogenesis. In a first stage, segmentation of the brittle and brittle-ductile models into basins and platforms is achieved by extension. Basins are partly filled with brittle material to allow for a strength differences between basin and platform realms, simulating relatively weaker, incompetent deposits of grabens surrounded by competent pre-rift basement or carbonate platform rock, respectively. In a second stage of deformation, contraction parallel to oblique (10 to 20 degrees) with respect to the basin axes has been applied leading to the inversion of earlier formed basins. The experiments show that the simple presence of an inherited platform-basin configuration controls the overall style of compressional deformation, no matter of including frictional or viscous basal décollements, of varying the rheology of the basin fill, or of changing platform-basin thickness ratios. Orientations of thrust faults change laterally across inherited platform-basin transitions throughout all experiments; higher obliquity of basin inversion leading to stronger curvature of thrusts with respect to the pre-existing rift axes. Variations in the strike of thrust fronts are accompanied by changes of the shortening direction along one single fault and time step. Furthermore, our models support localisation of deformation in areas of lateral strength contrasts, as platform-basin transitions represent. Reactivation of normal faults occurs in oblique basin inversion settings only, favourably at platform-basin transitions where the normal faults face the shortening direction. The amount and style of fault reactivation depend on the material used. Both parallel and oblique inversion experiments can be applied to polyphase deformed continental crust, as, e.g., the Dolomites Indenter of the eastern Southern Alps. Our models involving two phases of deformation, suggest that the whole tectonic evolution of the Dolomites Indenter is controlled by inherited features. Fault slip data and shortening directions from fold axes from our field case study along the western segment of the Belluno thrust of the Valsugana fault system support variations of thrust fault orientation and a lateral change in shortening direction (from SSW to SSE along strike) along one single fault. Based on our modelling results, we infer that this variability of shortening directions depends on inherited structures and do not necessarily reflect different deformation phases. [ABSTRACT FROM AUTHOR]

Basin inversion involves the reversal of subsidence in a basin due to compressional tectonic forces, leading to uplift of the basin's sedimentary infill. Detailed knowledge of basin inversion is of great importance for scientific, societal, and economic reasons, spurring continued research efforts to better understand the processes involved. Analogue tectonic modelling forms a key part of these efforts, and analogue modellers have conducted numerous studies of basin inversion. In this review paper we recap the advances in our knowledge of basin inversion processes acquired through analogue modelling studies, providing an up-to-date summary of the state of analogue modelling of basin inversion. We describe the different definitions of basin inversion that are being applied by researchers, why basin inversion has been historically an important research topic and what the general mechanics involved in basin inversion are. We subsequently treat the wide range of different experimental approaches used for basin inversion modelling, with attention to the various materials, set-ups, and techniques used for model monitoring and analysing the model results. Our new systematic overviews of generalized model results reveal the diversity of these results, which depend greatly on the chosen set-up, model layering and (oblique) kinematics of inversion, and 3D along-strike structural and kinematic variations in the system. We show how analogue modelling results are in good agreement with numerical models, and how these results help researchers to better understand natural examples of basin inversion. In addition to reviewing the past efforts in the field of analogue modelling, we also shed light on future modelling challenges and identify a number of opportunities for follow-up research. These include the testing of force boundary conditions, adding geological processes such as sedimentation, transport, and erosion; applying state-of-the-art modelling and quantification techniques; and establishing best modelling practices. We also suggest expanding the scope of basin inversion modelling beyond the traditional upper crustal "North Sea style" of inversion, which may contribute to the ongoing search for clean energy resources. It follows that basin inversion modelling can bring valuable new insights, providing a great incentive to continue our efforts in this field. We therefore hope that this review paper will form an inspiration for future analogue modelling studies of basin inversion. [ABSTRACT FROM AUTHOR]

The consequences of decoupling between weak orogenic wedges and strong adjacent foreland plates are investigated by means of lithospheric-scale analogue modeling. Decoupling is implemented in the three-layer models by lubrication of the inclined boundary between a strong foreland and a weak orogenic wedge. Plate boundaries are orthogonal to the convergence direction. Experimental results show that strong decoupling between the foreland and the orogenic wedge leads to underthrusting of the former underneath the orogenic wedge and deformation of the orogenic wedge by folding, shearing, and minor backthrusting. Shortening is mainly taken up along the main overthrust, the decoupled boundary, and within the orogenic wedge, leaving the indenter devoid of deformation. In contrast, strong coupling between the foreland and the orogenic wedge favors buckling, involving both the weak zone and the strong plates. The results of these end-member models have implications for collision zones, for example, the Eastern Alps in Europe, such that the switch from localized deformation within the orogenic wedge during the Oligocene-middle Miocene to orogen-scale uplift and deformation during the late Miocene-Pliocene involving the foreland and indenter plates, respectively, is interpreted as reflecting a change from a decoupled to a coupled system.

The high‐pressure metamorphic Nevado‐Filábride Complex (NFC) in the Betics mountain range of southeastern Spain exhibits continental and ocean‐derived tectonic units, which are key for understanding the geodynamic evolution of the Western Mediterranean. We address the current debate in the definition of tectonic units, the emplacement of (ultra)mafic rocks, and the timing of burial metamorphism by conducting a structural study combined with single grain fusion 40Ar/39Ar dating of white micas in structurally critical outcrops of the eastern Sierra de Los Filábres. One older 40Ar/39Ar age population (38–27 Ma) is found at distance from the main shear zones in the relics of an early foliation, while a younger 40Ar/39Ar population (22–12 Ma) is dominant in the vicinity of these shear zones, where the early foliation is obliterated. Both age groups are interpreted as the record of deformation or fluid‐induced recrystallization during distinct fabric‐forming events, while alternative scenarios are discussed. A key observation is the presence of an ophiolitic mélange, which—together with new and published geochronological data—allows for a new tectonic hypothesis. This considers Paleogene subduction beneath a Jurassic oceanic lithosphere, followed by the continued subduction of NFC and overlying ophiolites below the Alpujárride Complex. Exhumation during westward slab roll‐back led to the formation of an extensional detachment system that obliquely cut nappe contacts. Although the timing constraints for high pressure‐low temperature (HP‐LT) metamorphism in the NFC remain inconclusive, the new tectonic hypothesis provides a solution that can account for both Paleogene and Miocene ages of HP‐LT metamorphism. Key Points: White mica 40Ar/39Ar dating yields Paleogene ages in relic crenulations, while Miocene ages in the vicinity of shear zonesShear sense indicators imply top‐NNW nappe stacking and top‐W displacement along the Betic Movement ZoneA new hypothesis is formulated for a gradual, Paleogene‐early Miocene burial of the Nevado‐Filábride Complex [ABSTRACT FROM AUTHOR]

[1] We calculate the present-day lithospheric strength of the Eastern Alps along the new reflection seismic profile TRANSALP to examine vertical and lateral strength variations and their implications on neotectonic activity of the Eastern Alps. The large-scale geometry of the Eastern Alps and the spatial distribution of upper, and lower crustal layers, and the lithospheric mantle is constrained by the deep seismic line. Two rheological models, coupled to a kinematic thermal model that accounts for the thermal evolution of the Eastern Alps for the last 30 Myr, are investigated for the present-day lithospheric configuration in the Eastern Alps. Models with strong (Model A) and weak (Model B) crustal rheologies predict the European and the Adriatic plates to be stronger than the central zone of the orogen comprising the region between the Inntal Fault and the Periadriatic Fault. Model A is characterized by a brittle-ductile boundary between 14 and 9 km depth and strong coupling of the mechanically strong lower crust to the upper mantle, whereas Model B suggests the presence of a thick decoupling zone between the upper crust and the upper mantle and a shallower brittle-ductile boundary (7-10 km). Of these end-member scenarios, Model A is in better agreement with neotectonic data including seismicity down to the upper-lower crust boundary within the Adriatic plate, uplift of the central zone of the Eastern Alps and the Southern Alps, and eastward escape of fault-bound blocks. Such deformation pattern is best explained by lateral extrusion upon north-south compression supporting a strong-weak-strong configuration of tectonic units along the TRANSALP line. INDEX TERMS: 9335 Information Related to Geographic Region: Europe; 8102 Tectonophysics: Continental contractional orogenic belts; 8107 Tectonophysics: Continental neotectonics; 8159 Tectonophysics: Rheology--crust and lithosphere; 8164 Tectonophysics: Stresses--crust and lithosphere; KEYWORDS: Eastern Alps, lithospheric strength, neotectonics, rheology, TRANSALP.

Particle image velocimetry (PIV), a method based on image cross-correlation, is widely used for obtaining velocity fields from time-series of images of deforming objects. Rather than instantaneous velocities, we are interested in reconstructing cumulative deformation, and use PIV-derived incremental displacements for this purpose. Our focus is on analogue models of tectonic processes, which can accumulate large deformation. Importantly, PIV provides incremental displacements during analogue model evolution in a spatial reference (Eulerian) frame, without the need for explicit markers in a model. We integrate the displacements in a material reference (Lagrangian) frame, such that displacements can be integrated to track the spatial accumulative deformation field as a function of time. To describe cumulative, finite deformation, various strain tensors have been developed, and we discuss what strain measure best describes large shape changes, as standard infinitesimal strain tensors no longer apply for large deformation. PIV or comparable techniques have become a common method to determine strain in analogue models. However, the qualitative interpretation of observed strain has remained problematic for complex settings. Hence, PIV-derived displacements have not been fully exploited before, as methods to qualitatively characterize cumulative, large strain have been lacking. Notably, in tectonic settings, different types of deformation—extension, shortening, strike-slip—can be superimposed. We demonstrate that when shape changes are described in terms of Hencky strains, a logarithmic strain measure, finite deformation can be qualitatively described based on the relative magnitude of the two principal Hencky strains. Thereby, our method introduces a physically meaningful classification of large 2-D strains. We show that our strain type classification method allows for accurate mapping of tectonic structures in analogue models of lithospheric deformation, and complements visual inspection of fault geometries. Our method can easily discern complex strike-slip shear zones, thrust faults and extensional structures and its evolution in time. Our newly developed software to compute deformation is freely available and can be used to post-process incremental displacements from PIV or similar autocorrelation methods. [ABSTRACT FROM AUTHOR]

Pull-apart basins are structural features linked to the interactions between strike-slip and extensional tectonics. Their morphology and structural evolution are determined by factors such as extension rate, the basin length/width ratio, and changes in extension direction. In this work, we investigate the effect of a change in the plate motion direction on a pull-apart basin's structure, using analogue modelling experiments with a two-layer ductile-brittle configuration to simulate continental crust rheology. We initially impose orthogonal extension on an interconnected rift and strike-slip system to drive pull-apart development. Subsequently, we rotate the relative motion vector, imposing transtensional deformation and continuing with this new relative motion vector to the end of the experiment. To compare with natural examples, we analyse the model using seismic interpretation software, generating 3D fault structure and sedimentary thickness interpretations. Results show that the change in the direction of plate motion produces map-view sigmoidal oblique slip faults that become normal-slip when deformation adjusts to the new plate motion vector. Furthermore, sediment distribution is strongly influenced by the relative plate rotation, changing the locus of deposition inside the basin at each model stage. Finally, we compare our observations to seismic reflection images, sedimentary package thicknesses and fault interpretations from the Northern Gulf of California and find good agreement between model and nature. Similar fault arrays occur in the Bohai Basin in northern China, which suggests a rotational component in its evolution. More broadly, such similar structures could indicate a role for oblique extension and fault rotation in any pull-apart basin. [ABSTRACT FROM AUTHOR]

Although many different mechanisms for subduction initiation have been proposed, only few of them are viable in terms of consistency with observations and reproducibility in numerical experiments. In particular, it has recently been demonstrated that intra‐oceanic subduction triggered by an upwelling mantle plume could greatly contribute to the onset and operation of plate tectonics in the early and, to a lesser degree, modern Earth. On the contrary, the initiation of intra‐continental subduction still remains underappreciated. Here we provide an overview of 1) observational evidence for upwelling of hot mantle material flanked by downgoing proto‐slabs of sinking continental mantle lithosphere, and 2) previously published and new numerical models of plume‐induced subduction initiation. Numerical modeling shows that under the condition of a sufficiently thick (>100 km) continental plate, incipient downthrusting at the level of the lowermost lithospheric mantle can be triggered by plume anomalies of moderate temperatures and without significant strain‐ and/or melt‐related weakening of overlying rocks. This finding is in contrast with the requirements for plume‐induced subduction initiation within oceanic or thinner continental lithosphere. As a result, plume‐lithosphere interactions within continental interiors of Paleozoic‐Proterozoic‐(Archean) platforms are the least demanding (and thus potentially very common) mechanism for initiation of subduction‐like foundering in the Phanerozoic Earth. Our findings are supported by a growing body of new geophysical data collected in various intra‐continental areas. A better understanding of the role of intra‐continental mantle downthrusting and foundering in global plate tectonics and, particularly, in the initiation of "classic" ocean‐continent subduction will benefit from more detailed follow‐up investigations. Plain Language Summary: Subduction zones, areas where tectonic plates sink into the Earth mantle, are a vital component of the plate tectonic cycle and result in the opening and closure of oceans over geologic time. Despite major advances in the study of plate tectonics and geodynamics during the last decades, the causes for triggering subduction are still not well understood. In this paper, we review observations and insights from geodynamic models and show that upwelling inside the mantle (i.e., "mantle plumes or hot spots") offer a viable mechanism that takes lithospheric plates back into the deep mantle, thus initiating subduction. However, subduction initiated by mantle plumes within oceanic tectonic plates has rarely been observed in the Phanerozoic history of Earth (541‐0 Ma). In contrast, thick and old continental segments of tectonic plates appear to provide optimal conditions for their participation in plume‐induced sinking (subduction) into the interior of modern Earth in a mode detectable by geophysical imaging in different regions (Europe, Asia, North America). The role of such intra‐continental mantle sinking in global plate tectonics warrants thorough further examination in forthcoming studies. Key Points: We review insights from observational and numerical modeling studies on plume‐induced sinking of lithospheric mantlePlume‐induced mantle downthrusting within continental interiors and at their rims appears to be much more common than hitherto assumedPlausible consequences of intra‐continental mantle sinking for the operation of plate tectonics require further investigation [ABSTRACT FROM AUTHOR]

We have investigated subduction‐exhumation processes in the Pelagonian zone, exposed on the Northern Sporades islands (Aegean Sea) related to successive episodes of ocean continent and continent‐continent convergence through integrating multiscale structural analysis, metamorphic petrology, and white mica 40Ar/39Ar dating. Two major progressive phases of ductile deformation are documented, which are related to distinct episodes of tectonic burial and exhumation of the Pelagonian continental margin, which was facing the Neotethys/Vardar ocean. Review of existing data sets from neighboring regions shows that both deformation phases can be correlated along strike up to the Dinarides. The first phase of tectonic burial and exhumation (D1) is characterized by NW‐SE tectonic transport, greenschist facies metamorphism, and Early Cretaceous (~105‐135Ma) 40Ar/39 Ar white mica single fusion ages. D1 is correlated with the initial closure of the Vardar ocean by top‐to‐the‐W to NW ophiolite obduction and the underthrusting of the Pelagonian margin below the oceanic upper plate. Underthrusting was followed by exhumation and the deposition of Late Cretaceous‐Paleogene sediments. The second phase of burial and exhumation (D2) is characterized by NE‐SW tectonic transport, greenschist to blueschist facies metamorphism, and latest Cretaceous‐Early Eocene 40Ar/39 Ar white mica ages of S2 fabrics. Top‐to‐the‐SW shearing is correlated with the tectonic burial of the Pelagonian zone below the Eurasian continent (Rhodopia), while top‐to‐the‐NE shearing is attributed to subsequent extensional exhumation. D2 fabrics record low‐grade P‐T conditions suggesting that the decoupled cover formations exposed on Skopelos were incorporated in an accretionary wedge that formed above the subducting Pelagonian basement during Paleogene times. Key Points: Investigation of successive burial‐exhumation cycles by structural analysis and 40Ar/39Ar datingEarly Cretaceous deformation and metamorphism are linked to the underthrusting of the Pelagonian margin below the Vardar ophiolitesPaleogene deformation and metamorphism of Skopelos are governed by accretionary wedge evolution between Pelagonia and Rhodopia [ABSTRACT FROM AUTHOR]

ABSTRACT The sea floor of intraslope minibasins on passive continental margins plays a significant role in controlling turbidity current pathways and the resulting sediment distribution. To address this, laboratory analogue modelling of intraslope minibasin formation is combined with numerical flow simulations of multi-event turbidity currents. This approach permits an improved understanding of evolving flow-bathymetry-deposit interactions and the resulting internal stacking patterns of the infills of such minibasins. The bathymetry includes a shelf to slope channel followed by an upper minibasin, which are separated by a confining ridge from two lower minibasins that compares well with analogous bathymetries reported from natural settings. From a wider range of numerical flow experiments, a series of 100 consecutive flows is reported in detail. The turbidity currents are released into the channel and upon reaching the upper minibasin follow a series of stages from short initial ponding, 'filling and spilling' and an extended transition to long retrogradational ponding. Upon reaching the upper minibasin floor, the currents undergo a hydraulic jump and therefore much sediment is deposited in the central part of the minibasin and the counterslope. This modifies the bathymetry such that in the fill and spill stage, flow stripping and grain-size partitioning cause some finer sediment to be transported across the confining ridge into the lower minibasins. Throughout the basin infill process, the sequences retrograde upstream, accompanied by lateral switching into locally formed depressions in the upper minibasin. After the fill and spill stage, significant deposition occurs in the channel where retrograding cyclic steps with wavelengths of 1 to 2 km develop as a function of pulsating flow criticality. These results are at variance with conventional schemes that emphasize sequential downstream minibasin filling through ponding dominated by vertical aggradation. Comparison of these results with published field and experimental examples provides support for the main conclusions. [ABSTRACT FROM AUTHOR]

The thrust sheets of the Northern Calcareous Alps were emplaced during Late Cretaceous thrust-dominated transpression expressed by thrust sheets segmented by closely spaced tear faults. Thrust sheet-top sediments were deposited during thrusting and associated fold growth and were controlled by active folding and tearing. We observe two types of angular unconformities: (1) Angular unconformities above folds between tear faults conform with the model of progressive unconformities. Across these unconformities dip decreases upsection. (2) Here, we define progressive unconformities that are related to tear faults and are controlled by both folding and tearing. Across these unconformities both strike and dip change. In growth strata overlying folds dissected by high-angle faults, such unconformities are expected to be common. We used analogue modelling to define the geometry of the tear faults and related unconformities. Within the syn-tectonic sediments, a steep, upward flattening thrust within a broader, roughly tulip-shaped drag zone develops. The thrust roots in the tear fault in pre-tectonic deposits and is curved upward toward the downthrown block. Vertical offset on the thrust is related to differential vertical uplift caused by, for example, growth of folds with different wavelength and amplitude on either side of the tear fault. Formation of progressive unconformities is governed by the relationship between the rates of deposition and vertical growth of a structure. Fault-related progressive unconformities are additionally controlled by the growth of the vertical step across the tear fault. When the rates of vertical growth of two neighbouring folds separated by a tear fault are similar, the rate of growth across the tear fault is small; if the first differ, the latter is high. Episodic tear fault activity may create several angular unconformities attached to a tear fault or allow the generation of angular unconformities near tear faults in sedimentary systems that have a rate of deposition too high to generate classical progressive unconformities between the tear faults. [ABSTRACT FROM AUTHOR]

A series of analogue experiments utilizing sequences of sand with interlayered silicone polymer have been performed to investigate the effects of multistage extension on rock sequences of different strength, with particular reference to the Hoop Fault Complex of the Barents Sea. It was found that the width and style of the graben systems as seen in map view depend strongly on the extension velocity. Wide areas of graben formation are promoted by fast extension, whereas narrowly constrained deep-graben structures are typical of slow extension rates. Furthermore, the decoupling strata are likely to be characterized by flow rather than by distinct detachment faults. The scaled experiments produced units of contrasting fault frequencies and styles in individual sand layers positioned between layers of silicone polymer. It was also found that the fault segments developed from different levels were related to varying extents (hard-linked, soft-linked, firm-linked, unlinked). The fault configurations and the general fault pattern obtained in the experiments is similar to that observed in natural faults where salt or unconsolidated mudstone separate sequences of sand. [ABSTRACT FROM AUTHOR]

The lateral variation of the mechanical properties of continental lithosphere is an important factor controlling the localization of deformation and thus the deformation history and geometry of intraplate mountain belts. A series of three-layer lithospheric-scale analog models, with a strong domain (SD) embedded at various depths, are presented to investigate the development of topography and deformation patterns by having lateral heterogeneities within a weak continental lithosphere. The experiments, performed at a constant velocity and under normal gravity, indicate that the presence or absence of the SD controls whether deformation is localized or distributed at a lithospheric scale. Deformation and topography localize above the edges of the SD, while the SD region itself is characterized by minor amounts of surficial deformation and topography. The depth of the SD (within the ductile crust, ductile mantle lithosphere, or both) controls the pattern of deformation and thus the topography. The presence of a SD in the ductile crust or in the mantle results in limited surficial topographic effects but large variations in the Moho topography. Strong Moho deflection occurs when the SD is in the ductile crust, while the Moho remains almost flat when the SD is in the mantle. When the SD occupies the ductile lithosphere, the SD is tilted. These analog experiments provide insights into intraplate strain localization and could in particular explain the topography around the Tarim Basin, a lithospheric-scale heterogeneity north of the India-Asia collision zone. [ABSTRACT FROM AUTHOR]

Southern Ethiopia is a key region to understand the evolution of the East African rift system, since it is the area of interaction between the main Ethiopian rift (MER) and the Kenyan rift. However, geological data constraining rift evolution in this remote area are still relatively sparse. In this study the timing, distribution, and style of rifting in southern Ethiopia are constrained by new structural, geochronological, and geomorphological data. The border faults in the area are roughly parallel to preexisting basement fabrics and are progressively more oblique with respect to the regional Nubia-Somalia motion proceeding southward. Kinematic indicators along these faults are mainly dip slip, pointing to a progressive rotation of the computed direction of extension toward the south. Radiocarbon data indicate post 30 ka faulting at both western and eastern margins of the MER with limited axial deformation. Similarly, geomorphological data suggest recent fault activity along the western margins of the basins composing the Gofa Province and in the Chew Bahir basin. This supports that interaction between the MER and the Kenyan rift in southern Ethiopia occurs in a 200 km wide zone of ongoing deformation. Fault-related exhumation at ~10-12 Ma in the Gofa Province, as constrained by new apatite fission track data, occurred later than the ~20 Ma basement exhumation of the Chew Bahir basin, thus pointing to a northward propagation of the Kenyan rift-related extension in the area. [ABSTRACT FROM AUTHOR]

Two-dimensional numerical modeling methods were used to study the thermomechanical consequences of closure of the Meliata-Hallstatt ocean and Cretaceous continent-continent collision in the eastern Alps of Austria. It is deduced that the temperature evolution during eclogite exhumation is mainly reliant on rates of tectonic movements, but independent of the mode of exhumation.

Abstract: The balance between extension and contraction in back-arc basins is very sensitive to a number of parameters related to on-going subduction and collision processes. This leads to complex back-arc geometries, where a lateral transition between crustal blocks with contrasting rheologies is often recorded. One good example is the back-arc region of the Balkanides–Pontides orogens, where lateral variations in rheologies are observed between the Balkanides–Moesian block and the Pontides–Western Black Sea Basin. The latter opened during Cretaceous–Eocene, and has been inverted together with the former starting during late Middle Eocene. The inversion generated contrasting geometries along the orogenic strike, with a narrow zone of high deformation in the Balkanides–Moesia region, wide areas of thrusting with low offsets in the Pontides–Western Black Sea Basin and a transitional zone characterized by highly curved geometries. This overall type of inversion is investigated here by the means of analogue modelling testing the role of inherited crustal geometries during inversion. Our modelling suggests that the contrasting architecture of inverted structures observed in the Balkanides–Pontides domain are the result of pre-existing crustal stretching geometries of various blocks inherited from the Cretaceous–Eocene extension. The stretched and weak back-arc basins can transfer contraction deformation at large distances, explaining structures derived by observational studies. The collisional deformation recorded in the Pontides was transmitted at large distances that are in the range of the contraction structures observed in the centre and northern part of the Western Black Sea. In the light of analogue modelling results we argue that the Western Black Sea was a rheologically weaker domain when compared with the adjacent western onshore at the beginning of the inversion, in contrast with previous results derived from numerical modelling studies that argued for a strong West Black Sea domain at the beginning of inversion. [Copyright &y& Elsevier]

We present an analysis of the distribution, timing, and characteristics of the volcano-tectonic activity on the western margin of the Southern Main Ethiopian Rift in the Soddo area (latitudes between ~7°10'N and ~6°30'N). The margin is characterized by the presence of numerous normal faults, with limited vertical offset and often sigmoidal in shape, which accommodate a gentle transition from the rift floor to the Ethiopian plateau. New radiocarbon dating indicates post-30 ka fault activity, pointing to a significant Late Pleistocene-Holocene tectonic activity of the Soddo margin. Comparison of the fault architecture with analog models suggests that deformation has been controlled by a sub-E-W (roughly N100°E) extension direction, resulting in an oblique extension with respect to the roughly NE-SW-trending rift. This well accords with inversion of fault slip data collected on faults with Pleistocene-Holocene activity and is also in good agreement with recent GPS data from the Southern Main Ethiopian Rift. Our data support a close correlation between the recent volcanic activity and deformation in the study area, with eruptive vents located along the recent border faults; the axial tectono-magmatic activity is subordinate in the area. These findings support a transition from axial tectono-magmatic deformation in the Northern Main Ethiopian Rift to marginal deformation in the Central and Southern Main Ethiopian Rift, in turn indicating an along-axis, north to south decrease in rift maturity. [ABSTRACT FROM AUTHOR]

Abstract: The surface expression of a lateral polarity change of continental mantle lithosphere subduction has been studied by using lithosphere-scale physical models. Key parameters investigated were: the degree of lateral coupling between adjacent domains of opposing subduction polarity, the width of the zone separating the domains, and the lithosphere geometry and rheology. The model results illustrate an asymmetric lithospheric structure induced by deformation of the downgoing plates, which have been separated by a narrow transition zone. A wide and symmetric orogenic wedge overlying a region of thickened mantle lithosphere and hampered subduction characterizes this transition zone. In addition, interaction between the neighboring subduction domains caused downbending of the upper plates and resulted in the lateral termination of crustal structures and lowering of surface topography. The lateral extent of interaction between the domains strongly depends on the degree of coupling between the domains, the rheology of the mantle lithosphere and the amount of bulk shortening. The modelling results have major implications on the interpretation of seismic and tomographic data from the European Alps in terms of the crust and lithosphere geometries. It appears that an observed lateral change of subduction polarity at mantle depth can explain the variations of wedge build-up between the Western/Central and Eastern Alps. [Copyright &y& Elsevier]

Using analog modeling aided by digital image analysis (DPIV), we constrained the long-term kinematic evolution of strain partitioning in transpressional brittle wedges as a function of convergence angle. We ran a series of dry quartz sand experiments representing highly oblique continent-continent collision (convergence angles of 4° to 30°). The digital image analysis provided high-resolution constraints on the long-term kinematic evolution of these wedges, which could be subdivided in distinct kinematic stages, comprising (1) an initial 'distributed strain' stage and (2) an 'oblique wedge' stage before (3) the stage of strain partitioning is reached. Thus, we document the evolution of different deformation stages from a single plate tectonic boundary condition. In addition, the relationship between convergence angle, kinematic stages, and wedge geometry (including fault dips and fault hierarchy) was established. The modeling results show that smaller convergence angles lead to steeper faults. Besides, for a constant convergence angle, the proshears that evolved during the strain partitioning stage were less steep than those formed during the oblique wedge stage. The fault slip vector on individual fault segments was derived from the DPIV data set for each time increment, quantifying the magnitude and orientation of slip on fault segments during the different kinematic stages. In addition, in the 7.5° and 15° models, rotation of the slip vector by up to 40° was observed on a single proshear during the strain partitioning stage. These observations allow to some degree a validation of existing analytical models of strain partitioning, in particular the assumption of steady state. [ABSTRACT FROM AUTHOR]

Unlike for subaerial settings, the impact of subaqueous relay ramps on sediment dispersal is still poorly understood. A combination of analogue laboratory experiments in a sandbox with numerical flow calculations is used to simulate relay ramp topographies on rifting continental margins and to analyse the resulting turbidity current pathways and their deposits. Various scenarios are investigated, including inflow perpendicular and oblique to the relay ramp axis as well as flow constrained by an incised channel on the ramp and by a landward-directed tilt of the ramp. Without channelling, most sedimentation takes place on the basin floor because the bulk of the flow follows the steepest gradient down the fault and into the rift basin. With a channel along the relay ramp, significant flow occurs initially down the ramp axis, but channel spillover and basinward ramp tilting combine to redirect much of the sediment down the fault slope into the basin. When the relay ramp has a landward-oriented tilt, most of the current flows down the ramp and deposits its sediment load there and at the foot of the ramp. However, also here a considerable amount of the flow is shed over the hanging wall fault and into the basin, forming a secondary depocentre, while ponding redistributes thin deposits over a wider area of the basin. The quantitative dependence of these results on the specific ramp geometries remains to be investigated further but may bear great importance for refined sedimentary models in subaqueous rifted settings as well as for hydrocarbon exploration therein. [ABSTRACT FROM AUTHOR]

Abstract: The role of the plate boundary in a continental collisional setting is investigated by lithospheric-scale analogue models. Key variables in this study are the degree of coupling at the plate interface and along the Moho of the lower plate as well as the geometry of the plate contact. They control the onset of intra plate deformation, orogenic architecture, amount of mantle lithosphere subduction and basin development. In all experiments, deformation initiates at the plate interface by the formation of a pop-up structure. A vertical plate boundary with respect to the shortening direction results in buckling of the lithosphere, whereas experiments with an inclined plate boundary show underthrusting and foreland basin development without orogenic wedge formation. Continental collision and coinciding mantle lithosphere subduction may occur only if the lower crust of the foreland plate is weak enough promoting crust–mantle decoupling. During decoupling the weak lower crust beneath the orogen thickens significantly by ductile flow as it detaches from the down going mantle lithosphere. This lower crustal thickening effects the distribution of upper crustal deformation and topography. Subduction of weak lower crust is favored when the weak plate interface has a significant thickness (~15km in nature) and a high amount of shortening is applied. Increasing coupling at the plate interface through time leads to intra plate deformation by thickening and gentle folding and influences surface uplift and subsidence above the plate interface. The transition from a mechanically decoupled plate boundary with a significant amount of mantle lithosphere subduction towards stronger plate coupling resulting in intra plate deformation and topography development can be recorded in for instance the Caucasus, the Colombian Cordillera, the Pyrenees and the Alps. Thickening of the lower crust as portrayed for the Western Alps does not demand a strong, frictional-type behavior of the lower crust, but can also be the consequence of ductile processes. [Copyright &y& Elsevier]

The Scheiblingkirchen window, a Lower Austroalpine tectonic window at the eastern margin of the Eastern Alps (Austria) was formed during Late Cretaceous continent–continent collision. Structural investigations including structural mapping, microstructural studies and texture analysis revealed a decompression-related three-stage tectonic history of Lower Austroalpine units during the formation of the Scheiblingkirchen window.(1) Intra-Lower Austroalpine nappe stacking was by top-to-the-N out-of-sequence thrusting of the Kirchberg fold nappe over the Wechsel nappe under lower greenschist facies metamorphic conditions. The structural expression of the stacking event (D1) comprises a penetrative foliation containing a N–S trending stretching lineation, isoclinal recumbent folds trending subparallel to the stretching lineation and ultramylonites. Quartz and calcite microstructures indicate that dynamic recrystallization processes accompanied deformation. Their commonly moderately developed lattice preferred orientation record dominant slip on the prism and rhomb planes parallel to 〈a〉.(2) Subsequent exhumation of previously stacked rocks is related to the formation of foliation-parallel mylonitic shear zones within an E–W extensional regime (D2). Microstructures and textures suggest similar deformation temperatures during thrusting and extension.(3) A superimposed phase of NW–SE oriented horizontal shortening (D3) was accommodated by large- and small-scale upright folding of the area around NE–SW trending axes and by backthrusting leading to the antiformal doming of the Scheiblingkirchen Window. Subsequent subvertical flattening resulting from the shortening phase led to the formation of NE–SW trending, outcrop-scale open recumbent folds. Low temperature deformation conditions as inferred from the low degree of recrystallization of quartz and calcite aggregates and the dominance of glide on the basal planes point to a cooling-related deformation event. [Copyright &y& Elsevier]

Tearing of the lithosphere at the lateral end of a subduction zone is a consequence of ongoing subduction. The location of active lithospheric tearing is known as a Subduction-Transform-Edge-Propagator (STEP), and the tearing decouples the down going plate and the part of the plate that stays at the surface. STEPs can be found alongside many subduction zones, such as at the south Caribbean or the northern end of the Tonga trench. For the Caribbean, the San Sebastián/El Pilar fault zone represents the surface expression of the wide STEP fault between the Caribbean and South America, and the active STEP is located near Trinidad. However, what parts of the deeper lithosphere participate in the tearing process is largely unknown. Some constraints on the deformation of the deep part of the lithosphere are available from gravity, which suggests significant lateral variability in densities of the lithospheric mantle to the south of the STEP fault zone. A sub-crustal low-density zone beneath northern South America may result from higher sub-crustal temperatures, such as would arise from an asthenospheric window resulting from a wide STEP fault at depth. Here we investigate what controls the evolution and geometry of the lithospheric STEP.We study the ductile tearing in the process of STEP evolution by physical analogue models, which are dynamically driven by the buoyancy of the subducting slab. In our experiments, the lithosphere as well as asthenosphere are viscoelastic media in a free subduction setup. A stress-dependent rheology plays a major role in localization of strain in tearing processes of lithosphere such as slab break-off. Therefore we developed and tested new analogue materials that can serve as mechanical analogues for the stress-dependent lithosphere rheology, such as has been inferred by rock laboratory test for dislocation creep of olivine. We show the influence of age and integrated strength of the lithosphere and its contrasts across the passive margin, on the timing, depth, and the degree of localization of the tearing process. When tearing of the lithosphere is dominated by ductile deformation, we find that gradual necking of the passive margin precedes tearing. Furthermore, we relate the tearing at depth to deformation at the surface during the evolution of the STEP. [ABSTRACT FROM AUTHOR]