Search

A series of highly soluble donor–acceptor (D–A) copolymers containing N-(3,4,5-tri-n-decyloxyphenyl)-dithieno[3,2-b:2′,3′-d]pyrrole (DTP) or N-(2-decyltetradecyl)-dithieno[3,2-b:2′,3′-d]pyrrole (DTP′) as donor and three different acceptors, 4,7-dithien-2-yl-[2,1,3]-benzothiadiazole, 4,9-dithien-2-yl-6,7-di-n-hexyl-[1,2,5]thiadiazolo[3,4-g]quinoxaline and 4,8-dithien-2-yl-2λ4δ2-benzo[1,2-c;4,5-c′]bis[1,2,5]thiadiazole (BThX, X = BTD, TQHx2, BBT, respectively) were synthesized by Stille coupling polymerizations. The optical and electrochemical properties of these copolymers were investigated, along with their use in field-effect transistors and photovoltaic devices. The band gaps (eV) estimated from UV-vis-NIR spectra and electrochemical measurements of the copolymers varied from ca.1.5–0.5 eV, and were consistent with quantum-chemical estimates extrapolated using density functional theory. Oxidative and reductive spectroelectrochemistry of the copolymers indicated they can be both p-doped and n-doped, and three to four differently colored redox states of the polymers can be accessed through electrochemical oxidation or reduction. The DTP-BThBTD and DTP-BThTQHx2copolymers exhibited average field-effect hole mobilities of 1.2 × 10−4and 2.2 × 10−3cm2/(Vs), respectively. DTP-BThBBT exhibited ambipolar field-effect characteristics and showed hole and electron mobilities of 1.2 × 10−3and 5.8 × 10−4cm2/(Vs), respectively. Bulk heterojunction photovoltaic devices made from blends of the copolymers with 3′-phenyl-3′H-cyclopropa[1,9](C60-Ih)[5,6]fullerene-3′-butanoic acid methyl ester (PCBM) (1:3 weight ratio) exhibited average power conversion efficiencies as high as 1.3% under simulated irradiance of 75 mW/cm2. [ABSTRACT FROM AUTHOR]

We investigate the effects of surface modification of indium tin oxide (ITO) on the performance of organic multilayer molecular photovoltaic devices based on pentacene/C60bi-layer heterojunctions. Values of the open-circuit voltage (Voc), short circuit current density (Jsc), fill factor (FF), and power conversion efficiency (η) are found invariant of the work function and surface hydrophobicity of ITO. Insensitivity of these parameters to variations of work function in the range of 4.50 to 5.40 eV achieved through the use of surface modifiers are correlated with an invariance of the barrier height (∼0.6 eV) due to Fermi level pinning at the ITO/pentacene interface. Energy barrier heights are extracted independently from the analysis of the electrical characteristics of single-layer diodes based on modified ITO and pentacene using an equivalent circuit model. [ABSTRACT FROM AUTHOR]

In this study, we investigate the lasing properties of 4,4′-bis[(N-carbazole)styryl]biphenyl thin films under electrical pumping. The electroluminescent devices incorporate a mixed-order distributed feedback SiO2 grating into an organic light-emitting diode structure and emit blue lasing. The results provide an indication of lasing by direct injection of current into an organic thin film through selection of a high-gain organic semiconductor showing clear separation of the lasing wavelength from significant triplet and polaron absorption and design of a proper feedback structure with low losses at high current densities. This study represents an important advance toward a future organic laser diode technology. [ABSTRACT FROM AUTHOR]