Search

Thoracic aortic aneurysm (TAA) is a local dilation of the thoracic aorta. Although universally used, aneurysm diameter alone is a poor predictor of major complications such as rupture. There is a need for better biomarkers for risk assessment that also reflect the aberrant flow patterns found in TAAs. Furthermore, hypertension is often present in TAA patients and may play a role in progression of aneurysm. The exact relation between TAAs and hypertension is poorly understood. This study aims to create a numerical model of hypertension in the aorta by using computational fluid dynamics. First, a normotensive state was simulated in which flow and resistance were kept unaltered. Second, a hypertensive state was modeled in which blood inflow was increased by 30%. Third, a hypertensive state was modeled in which the proximal and peripheral resistances and capacitance parameters from the three-element Windkessel boundary condition were adjusted to mimic an increase in resistance of the rest of the cardiovascular system. One patient with degenerative TAA and one healthy control were successfully simulated at hypertensive states and were extensively analyzed. Furthermore, three additional TAA patients and controls were simulated to validate our method. Hemodynamic variables such as wall shear stress, oscillatory shear index, endothelial cell activation potential (ECAP), vorticity and helicity were studied to gain more insight on the effects of hypertension on flow patterns in TAAs. By comparing a TAA patient and a control at normotensive state at peak-systole, helicity and vorticity were found to be lower in the TAA patient throughout the entire domain. No major changes in flow and flow derived quantities were observed for the TAA patient and control when resistance was increased. When flow rate was increased, regions with high ECAP values were found to reduce in TAA patients in the aneurysm region which could reduce the risk of thrombogenesis. Thus, it may be important to assess cardiac output in patients with TAA., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Objective: Atherosclerotic large vessel disease is potentially involved in the pathogenesis of cerebral small vessel disease related to occurrence of white matter lesions (WMLs) in the brain. We aimed to assess morphological and functional carotid vessel wall properties in relation to WML using magnetic resonance imaging (MRI) in myocardial infarction (MI) patients., Materials and Methods: A total of 20 MI patients (90 % male, 61 ± 11 years) underwent carotid artery and brain MRI. Carotid vessel wall thickness (VWT) was assessed, by detecting lumen and outer wall contours. Carotid pulse wave velocity (PWV), a measure of elasticity, was determined using the transit-time method. Patients were divided according to the median VWT into two groups. Brain MRI allowed for the WML score., Results: Mean VWT was 1.41 ± 0.29 mm and mean carotid PWV was 7.0 ± 2.2 m/s. A significant correlation (Pearson r = 0.45, p = 0.046) between VWT and PWV was observed. Furthermore, in the group of high VWT, the median WML score was higher as compared with the group with lower VWT (4.0 vs 3.0, p = 0.035)., Conclusions: Carotid artery morphological and functional alterations are correlated in MI patients. Patients with high VWT showed a higher amount of periventricular WMLs. These findings support the hypothesis that atherosclerotic large vessel disease is potentially involved in the pathogenesis of cerebral small vessel disease.

Objectives: In acute type B aortic dissection (ABAD) a patent false lumen portends a poor outcome. Patent branch vessels originating from the false lumen in a type B aortic dissection are assumed to contribute to persistent blood flow and patent false lumen. Therefore, the morphologic changes of the false lumen generated by different outflow rates in an in vitro model were investigated., Methods: An artificial dissection was created in two ex vivo porcine aortas. A thin cannula was placed in the false lumen, simulating a branch vessel originating from it. The aorta was positioned in a validated in vitro circulatory system with physiological pulsatile flow (1,500-2,700 mL/minute) and pressure characteristics (130/70 mm Hg). The cannula was attached to a small silicone tube with an adjustable valve mechanism. Three different valve settings were used for creating outflow from the false lumen (fully closed, opened at 50%, and fully opened at 100%). Measurements of lumen areas and flow rates were assessed with time-resolved magnetic resonance imaging. In order to study reproducibility, the experiment was performed twice in two different porcine aortas with a similar morphology., Results: Increasing antegrade outflow through the branch vessel of the false lumen resulted in a significant (p < .01) increase of the mean false lumen area at the proximal and distal location in both models. The distal false lumen expanded up to 107% in the case of high outflow via the false lumen through the branch vessel., Conclusions: Increasing antegrade outflow through a branch vessel originating from the false lumen when no distal re-entry tear is present results in an expansion of the cross sectional false lumen area., (Copyright © 2014 European Society for Vascular Surgery. Published by Elsevier Ltd. All rights reserved.)

Aim: To evaluate recovery of cardiac function after acute pulmonary embolism (PE)., Materials and Methods: Routine breath-held computed tomography (CT)-pulmonary angiography was performed in patients with suspected PE to confirm or exclude the diagnosis of PE at initial presentation. Electrocardiogram (ECG)-triggered cardiac CT was performed to assess biventricular function. After 6 months, cardiac magnetic resonance imaging (MRI) was performed. In total, 15 consecutive patients with PE and 10 without were studied. A significant change in ventricular volume was defined as a >15% change in end-diastolic or -systolic volumes (EDV, ESV), and significant ventricular function improvement as a >5% increase in ejection fraction (EF) as based on reported cut-off values., Results: Right and left ventricular (RV and LV) EDV and ESV changed non-significantly (<1.3%) in the patients without PE, indicating good comparability of those values measured by CT and MRI. PE patients with baseline normal RV function (RVEF ≥ 47%) revealed a >5% improvement in the RVEF (+5.4 ± 3.1%) due to a decrease in the RVESV. Patients with baseline abnormal RV function showed a >5% improvement in the RVEF (+14 ± 15%) due to decreases in both the RVESV and RVEDV. Furthermore, the LVEDV increased in this latter patient group., Conclusions: The present study demonstrated an improvement in RV function in the majority of patients with PE, independent of baseline RV function. The degree of RV and LV recovery was dependent on the severity of baseline RV dysfunction., (2011 The Royal College of Radiologists. Published by Elsevier Ltd. All rights reserved.)

Background: The quantification of transvalvular blood flow through the mitral valve (MV) and regurgitant flow in particular is difficult with echocardiography, which is the method of choice to diagnose patients selected for valve repair or replacement. With magnetic resonance imaging, information on the intraventricular blood flow can be obtained. Several scanning techniques have attempted to assess the regurgitant flow. These techniques either do not directly assess the complete flow through the MV, or they do not measure the flow at the location of the valve., Aim: To investigate the accuracy of a novel method using three-directional velocity-encoded MRI to acquire the transvalvular blood flow directly from the intraventricular blood flow field, also representing the regurgitant flow during systole., Methods: Ten volunteers without cardiac valvular disease were recruited. The transvalvular MV flow volume was measured with three-directional velocity-encoded MRI (3-dir MV flow)., Results: The transvalvular flow measurements correlate very well with the flow measured in the aorta (r p =0.92, p<0.01). The small differences (mean -5±7 ml) are insignificant (p=0.06) and demonstrate the high accuracy of the new method. Intra- and inter-observer studies showed non-significant mean differences of 0.9±5.1 ml and 1.3±5.6 ml, respectively, thereby proving the high reproducibility., Conclusion: Three-directional velocity-encoded MRI is a patient-friendly and easy-to-use method suitable for quantifying the regurgitant MV flow in clinical practice.

The accurate assessment of the presence and extent of vascular disease, and planning of vascular interventions based on MRA requires the determination of vessel dimensions. The current standard is based on measuring vessel diameters on maximum intensity projections (MIPs) using calipers. In order to increase the accuracy and reproducibility of the method, automated analysis of the 3D MR data is required. A novel method for automatically determining the trajectory of the vessel of interest, the luminal boundaries, and subsequent the vessel dimensions is presented. The automated segmentation in 3D uses deformable models, combined with knowledge of the acquisition protocol. The trajectory determination was tested on 20 in vivo studies of the abdomen and legs. In 93% the detected trajectory followed the vessel. The luminal boundary detection was validated on contrast-enhanced (CE) MRA images of five stenotic phantoms. The results from the automated analysis correlated very well with the true diameters of the phantoms used in the in vitro study (r = 0.999, P < 0.001). MRA and x-ray angiography (XA) of the phantoms also correlated well (r = 0.895, P < 0.001). The average unsigned difference between the MRA and XA measurements was 0.08 +/- 0.05 mm. In conclusion, the automated approach allows the accurate assessment of vessel dimensions in MRA images., (Copyright 2003 Wiley-Liss, Inc.)

Magnetic resonance imaging (MRI) can be used in vivo in combination with computational fluid dynamics (CFD) to derive velocity profiles in space and time and accordingly, pressure drop and wall shear stress distribution in natural or artificial vessel segments. These hemodynamic data are difficult or impossible to acquire directly in vivo. Therefore, research has been performed combining MRI and CFD for flow simulations in flow phantoms, such as bends or anastomoses, and even in human vessels such as the aorta, the carotid, and the abdominal bifurcation. There is, however, no unanimity concerning the use of MRI velocity measurements as input for the inflow boundary condition of a CFD simulation. In this study, different input possibilities for the inflow boundary conditions are compared. MRI measurements of steady and pulsatile flow were performed on a U bend phantom, representing the aorta geometry. PAMFLOW (ESI Software, Krimpen aan den Ussel, The Netherlands), an industrial CFD software package, was used to solve the Navier-Stokes equations for incompressible flow. Three main parameters were found to influence the choice of an inflow boundary condition type. First, the flow rate through a vessel should be exact, since it proves to be a determining factor for the accuracy of the velocity profile. The other decisive parameters are the physiology of the flow profile and the required computer processing unit time. Our comparative study indicates that the best way to handle an inflow boundary condition is to use the velocities measured by MRI at the inflow plane as being fixed velocities. However, before using these MRI velocity data, they first should be corrected for the partial volume effect by filtering and second scaled in order to obtain the correct flow rate. This implies that a reliable flow rate measurement absolutely is needed for CFD calculations based on MRI velocity measurements.