Search

As one of the most widely used personal protective equipment (PPE), body armors play an important role in protecting the human body from the high-velocity impact of bullets or projectiles. The body torso and critical organs of the wear may suffer severe behind-armor blunt trauma (BABT) even though the impactor is stopped by the body armor. A type of novel composite material through incorporating shear stiffening gel (STG) into ethylene-vinyl acetate (EVA) foam is developed and used as buffer layers to reduce BABT. In this paper, the protective performance of body armors composed of fabric bulletproof layers and a buffer layer made of foam material is investigated both experimentally and numerically. The effectiveness of STG-modified EVA in damage relief is verified by ballistic tests. In parallel with the experimental study, numerical simulations are conducted by LS-DYNA® to investigate the dynamic response of each component and capture the key mechanical parameters, which are hardly obtained from field tests. To fully describe the material behavior under the transient impact, the selected constitutive models take the failure and strain rate effect into consideration. A good agreement between the experimental observations and numerical results is achieved to prove the validity of the modelling method. The tests and simulations show that the impact-induced deformation on the human body is significantly reduced by using STG-modified EVA as the buffering material. The improvement of protective performance is attributed to better dynamic properties and more outstanding energy absorption capability of the composite foam.

Single-cell analysis provides an overwhelming strategy for revealing cellular heterogeneity and new perspectives for understanding the biological function and disease mechanism. Moreover, it promotes the basic and clinical research in many fields at a single-cell resolution. A digital polymerase chain reaction (dPCR) is an absolute quantitative analysis technology with high sensitivity and precision for DNA/RNA or protein. With the development of microfluidic technology, digital PCR has been used to achieve absolute quantification of single-cell gene expression and single-cell proteins. For single-cell specific-gene or -protein detection, digital PCR has shown great advantages. So, this review will introduce the significance and process of single-cell analysis, including single-cell isolation, single-cell lysis, and single-cell detection methods, mainly focusing on the microfluidic single-cell digital PCR technology and its biological application at a single-cell level. The challenges and opportunities for the development of single-cell digital PCR are also discussed.

Spatial profiling technologies fill the gap left by the loss of spatial information in traditional single-cell sequencing, showing great application prospects. After just a few years of quick development, spatial profiling technologies have made great progress in resolution and simplicity. This review introduces the development of spatial omics sequencing based on microfluidic array chips and describes barcoding strategies using various microfluidic designs with simplicity and efficiency. At the same time, the pros and cons of each strategy are compared. Moreover, commercialized solutions for spatial profiling are also introduced. In the end, the future perspective of spatial omics sequencing and research directions are discussed.

Porcine reproductive and respiratory syndrome (PRRS) is an infectious viral disease that causes great harm to the pig industry. PRRS virus (PRRSV), the causative agent of PRRS, is characterized by severe reproductive failure and respiratory confusion. This study performed a cross-sectional investigation of PRRSV seroprevalence and collected 14,134 serum samples in pig farms without PRRSV vaccination from 12 provinces and two cities in China from 2017 to 2021 to detect PRRSV antibodies by enzyme-linked immunosorbent assay (ELISA). The apparent and true PRRSV antibody prevalence was estimated and compared based on the Clopper-Pearson method and Pearson chi-square test, respectively. Risk factors associated with the PRRSV serological status of pig farms were analyzed through univariate and multivariable logistic regression analysis. An automatic autoregressive integrated moving average (ARIMA) model procedure was used for time-series analysis for PRRSV seroprevalence. Spatial clusters of high PRRSV seroprevalence were detected by SaTScan software. The total true PRRSV seroprevalence of the animal level was 62.56% (95% confidence interval [CI]: 61.74–63.37%). Additionally, 286 out of 316 pig farms were positive for PRRSV antibodies at the herd level. Pig farms without pseudorabies virus (PRV) infection were 5.413 (95% CI: 1.977–17.435) times more likely to be PRRSV antibody positive than those with PRV. Identically, the possibility of pig farms being PRRSV antibody positive before an African swine fever (ASF) outbreak was 3.104 (95% CI: 1.122–10.326) times more than after ASF. The odd ratio values of medium and large pig farms with PRRSV infection are 3.076 (95% CI: 1.005–9.498) and 6.098 (95% CI: 1.814–21.290). A fluctuant decline pattern for PRRSV prevalence was observed in the temporal analysis. Three significant clusters of high PRRSV seroprevalence were first detected in China, covering a time frame from January 2018 to September 2018, which reveals high PRRSV prevalence before the outbreak of ASF. These findings show the epidemic situation and spatial-temporal distribution of PRRSV infection in China in recent years and could help develop reasonable measures to prevent PRRSV infection.

ARID1A is one of the most frequently mutated epigenetic regulators in a wide spectrum of cancers. Recent studies have shown that ARID1A deficiency induces global changes in the epigenetic landscape of enhancers and promoters. These broad and complex effects make it challenging to identify the driving mechanisms of ARID1A deficiency in promoting cancer progression. Here, we identified the anti-senescence effect of Arid1a deficiency in the progression of pancreatic intraepithelial neoplasia (PanIN) by profiling the transcriptome of individual PanINs in a mouse model. In a human cell line model, we found that ARID1A deficiency upregulates the expression of aldehyde dehydrogenase 1 family member A1 (ALDH1A1), which plays an essential role in attenuating the senescence induced by oncogenic KRAS through scavenging reactive oxygen species. As a subunit of the SWI/SNF chromatin remodeling complex, our ATAC sequencing data showed that ARID1A deficiency increases the accessibility of the enhancer region of ALDH1A1. This study provides the first evidence that ARID1A deficiency promotes pancreatic tumorigenesis by attenuating KRAS-induced senescence through the upregulation of ALDH1A1 expression.

Summary: Cancer cells function as primary architects of the tumor microenvironment. However, the molecular features of cancer cells that govern stromal cell phenotypes remain unclear. Here, we show that cancer-associated fibroblast (CAF) heterogeneity is driven by lung adenocarcinoma (LUAD) cells at either end of the epithelial-to-mesenchymal transition (EMT) spectrum. LUAD cells that have high expression of the EMT-activating transcription factor ZEB1 reprogram CAFs through a ZEB1-dependent secretory program and direct CAFs to the tips of invasive projections through a ZEB1-driven CAF repulsion process. The EMT, in turn, sensitizes LUAD cells to pro-metastatic signals from CAFs. Thus, CAFs respond to contextual cues from LUAD cells to promote metastasis.

Food poisoning and infectious diseases caused by Salmonella typhimurium (S. typhimurium) are serious public health concerns for human health and food safety. The diversity and complexity of food matrices pose great challenges for rapid and ultra-sensitive detection of S. typhimurium in food samples. A method capable of identification, detection, and quantification of S. typhimurium is essential for addressing these issues. In this study, aptamer-coated magnetic beads (Apt-MBs) are employed as capture bio-probes to specifically and selectively concentrate S. typhimurium in food samples. A self-priming chip-based digital PCR was then presented as another biosensor for on-site detection and quantification of S. typhimurium cells. The chip we developed was robust and did not require any external power for sample loading. The combination of Apt-MBs with an on-chip digital detection realized the integration into lab-on-a-chip-based biosensors for on-site monitoring of foodborne pathogens. It was possible to capture and detect S. typhimurium cells as low as 90 CFU/reaction with a capture efficiency of 94.5%. Additionally, the whole process only took about 2 h. This unique platform could also be used to monitor other target bacteria with high specificity and sensitivity by utilizing different aptamers. Furthermore, the platform has potential applications in point-of-care testing in the future.

Single-cell RNA sequencing (scRNA-seq) technology provides a powerful tool for understanding complex biosystems at the single-cell and single-molecule level. The past decade has been a golden period for the development of single-cell sequencing, with scRNA-seq undergoing a tremendous leap in sensitivity and throughput. The application of droplet- and microwell-based microfluidics in scRNA-seq has contributed greatly to improving sequencing throughput. This review introduces the history of development and important technical factors of scRNA-seq. We mainly focus on the role of microfluidics in facilitating the development of scRNA-seq technology. To end, we discuss the future directions for scRNA-seq.

Abstract Droplet‐based single cell sequencing technologies, such as inDrop, Drop‐seq, and 10X Genomics, are catalyzing a revolution in the understanding of biology. Barcoding beads are key components for these technologies. What is limiting today are barcoding beads that are easy to fabricate, can efficiently deliver primers into drops, and thus achieve high detection efficiency. Here, this work reports an approach to fabricate dissolvable polyacrylamide beads, by crosslinking acrylamide with disulfide bridges that can be cleaved with dithiothreitol. The beads can be rapidly dissolved in drops and release DNA barcode primers. The dissolvable beads are easy to synthesize, and the primer cost for the beads is significantly lower than that for the previous barcoding beads. Furthermore, the dissolvable beads can be loaded into drops with >95% loading efficiency of a single bead per drop and the dissolution of beads does not influence reverse transcription or the polymerase chain reaction (PCR) in drops. Based on this approach, the dissolvable beads are used for single cell RNA and protein analysis.

The mammalian cochlea loses its ability to regenerate new hair cells prior to the onset of hearing. In contrast, the adult vestibular system can produce new hair cells in response to damage, or by reprogramming of supporting cells with the hair cell transcription factor Atoh1. We used RNA-seq and ATAC-seq to probe the transcriptional and epigenetic responses of utricle supporting cells to damage and Atoh1 transduction. We show that the regenerative response of the utricle correlates with a more accessible chromatin structure in utricle supporting cells compared to their cochlear counterparts. We also provide evidence that Atoh1 transduction of supporting cells is able to promote increased transcriptional accessibility of some hair cell genes. Our study offers a possible explanation for regenerative differences between sensory organs of the inner ear, but shows that additional factors to Atoh1 may be required for optimal reprogramming of hair cell fate.

Congenital insensitivity to pain with anhidrosis (CIPA) is a rare autosomal recessive heterogeneous disorder mainly caused by mutations in the neurotrophic tyrosine receptor kinase 1 gene ( NTRK1 ) and characterized by insensitivity to noxious stimuli, anhidrosis, and intellectual disability. We herein report the first north Han Chinese patient with CIPA who exhibited classic phenotypic features and severe intellectual disability caused by a homozygous c.851-33T>A mutation of NTRK1 , resulting in aberrant splicing and an open reading frame shift. We reviewed the literature and performed in silico analysis to determine the association between mutations and intellectual disability in patients with CIPA. We found that intellectual disability was correlated with the specific Ntrk1 protein domain that a mutation jeopardized. Mutations located peripheral to the Ntrk1 protein do not influence important functional domains and tend to cause milder symptoms without intellectual disability. Mutations that involve critical amino acids in the protein are prone to cause severe symptoms, including intellectual disability.

Electrochemical machining (ECM) is a cost-effective method for the machining of difficult-to-cut Inconel 718 superalloy. However, the machining accuracy of ECM is still limited by the poor localization effect due to the existence of stray corrosion. In this paper, a mixed solution of neutral NaNO3 and alkaline NaOH is used to improve the localization effect during ECM of Inconel 718. The potentiodynamic polarization curves and current efficiencies for metal dissolution are measured, and the micro morphologies are examined. The results show that the use of an alkaline solution can promote the formation of a compact passive film on the surface of Inconel 718. ECM tests with cylindrical electrodes are specially designed to verify the effect of alkaline solution on the localization of anodic dissolution. The experimental results indicated that the stray corrosion of the non-machined surface of Inconel 718 alloy can be effectively eliminated by using a mixed solution of NaNO3 and NaOH. The surface roughness of the non-machined area can be noticeably improved.

Single-cell analysis provides an overwhelming strategy for revealing cellular heterogeneity and new perspectives for understanding the biological function and disease mechanism. Moreover, it promotes the basic and clinical research in many fields at a single-cell resolution. A digital polymerase chain reaction (dPCR) is an absolute quantitative analysis technology with high sensitivity and precision for DNA/RNA or protein. With the development of microfluidic technology, digital PCR has been used to achieve absolute quantification of single-cell gene expression and single-cell proteins. For single-cell specific-gene or -protein detection, digital PCR has shown great advantages. So, this review will introduce the significance and process of single-cell analysis, including single-cell isolation, single-cell lysis, and single-cell detection methods, mainly focusing on the microfluidic single-cell digital PCR technology and its biological application at a single-cell level. The challenges and opportunities for the development of single-cell digital PCR are also discussed. [ABSTRACT FROM AUTHOR]

Synapses are crucial structures that mediate signal transmission between neurons in complex neural circuits and display considerable morphological and electrophysiological heterogeneity. So far we still lack a high-throughput method to profile the molecular heterogeneity among individual synapses. In the present study, we develop a droplet-based single-cell (sc) total-RNA-sequencing platform, called Multiple-Annealing-and-Tailing-based Quantitative scRNA-seq in Droplets, for transcriptome profiling of individual neurites, primarily composed of synaptosomes. In the synaptosome transcriptome, or 'synaptome', profiling of both mouse and human brain samples, we detect subclusters among synaptosomes that are associated with neuronal subtypes and characterize the landscape of transcript splicing that occurs within synapses. We extend synaptome profiling to synaptopathy in an Alzheimer's disease (AD) mouse model and discover AD-associated synaptic gene expression changes that cannot be detected by single-nucleus transcriptome profiling. Overall, our results show that this platform provides a high-throughput, single-synaptosome transcriptome profiling tool that will facilitate future discoveries in neuroscience. High-throughput profiling of the transcriptomes of individual synapses shows molecular heterogeneity. [ABSTRACT FROM AUTHOR]

Spatial profiling technologies fill the gap left by the loss of spatial information in traditional single-cell sequencing, showing great application prospects. After just a few years of quick development, spatial profiling technologies have made great progress in resolution and simplicity. This review introduces the development of spatial omics sequencing based on microfluidic array chips and describes barcoding strategies using various microfluidic designs with simplicity and efficiency. At the same time, the pros and cons of each strategy are compared. Moreover, commercialized solutions for spatial profiling are also introduced. In the end, the future perspective of spatial omics sequencing and research directions are discussed. [ABSTRACT FROM AUTHOR]

Copyright of Advanced Textile Technology is the property of Zhejiang Sci-Tech University Magazines and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The rapid and accurate detection of viable bacteria is of great importance in food quality monitoring and clinical diagnosis. Escherichia coli (E. coli) is a major pathogenic bacterium, which causes potential threats to food safety and human health. Therefore, rapid and portable methods for preventing E. coli outbreaks are needed. Single cell analysis can be performed at the single-cell level, which has great advantages for analysis and diagnosis. Herein, we employed a thermosetting oil to generate a large-scale pico-droplet array for viable bacteria digital counting and dynamic tracking. In this array, the droplets can be solidified without any inducers due to the cross-linking reaction of the hydrosilation of vinyl silicone oil and hydrosilicone oil. Single E. coli cells were encapsulated in solidified droplets to form a microcolony. Resazurin was used as a fluorescent indicator to achieve amplification of bacterial growth signals. This method can achieve digital counting of viable E. coli cells in 4 h. We achieved real-time monitoring of E. coli cell growth and division in droplets. It is rapid, simple, and does not require a pre-enrichment process when compared to the traditional plate counting method. We successfully applied the method for the enumeration of E. coli in milk. In conclusion, the thermosetting oil enables the immobilization of droplets to achieve real-time monitoring and digital counting of bacterial growth without impairing the flexibility of droplet microfluidics, and it has the potential to provide dynamic information at high resolution in this process. [ABSTRACT FROM AUTHOR]

Food poisoning and infectious diseases caused by Salmonella typhimurium (S. typhimurium) are serious public health concerns for human health and food safety. The diversity and complexity of food matrices pose great challenges for rapid and ultra-sensitive detection of S. typhimurium in food samples. A method capable of identification, detection, and quantification of S. typhimurium is essential for addressing these issues. In this study, aptamer-coated magnetic beads (Apt-MBs) are employed as capture bio-probes to specifically and selectively concentrate S. typhimurium in food samples. A self-priming chip-based digital PCR was then presented as another biosensor for on-site detection and quantification of S. typhimurium cells. The chip we developed was robust and did not require any external power for sample loading. The combination of Apt-MBs with an on-chip digital detection realized the integration into lab-on-a-chip-based biosensors for on-site monitoring of foodborne pathogens. It was possible to capture and detect S. typhimurium cells as low as 90 CFU/reaction with a capture efficiency of 94.5%. Additionally, the whole process only took about 2 h. This unique platform could also be used to monitor other target bacteria with high specificity and sensitivity by utilizing different aptamers. Furthermore, the platform has potential applications in point-of-care testing in the future. [ABSTRACT FROM AUTHOR]

Single-cell RNA sequencing (scRNA-seq) technology provides a powerful tool for understanding complex biosystems at the single-cell and single-molecule level. The past decade has been a golden period for the development of single-cell sequencing, with scRNA-seq undergoing a tremendous leap in sensitivity and throughput. The application of droplet- and microwell-based microfluidics in scRNA-seq has contributed greatly to improving sequencing throughput. This review introduces the history of development and important technical factors of scRNA-seq. We mainly focus on the role of microfluidics in facilitating the development of scRNA-seq technology. To end, we discuss the future directions for scRNA-seq. [ABSTRACT FROM AUTHOR]

Droplet‐based single cell sequencing technologies, such as inDrop, Drop‐seq, and 10X Genomics, are catalyzing a revolution in the understanding of biology. Barcoding beads are key components for these technologies. What is limiting today are barcoding beads that are easy to fabricate, can efficiently deliver primers into drops, and thus achieve high detection efficiency. Here, this work reports an approach to fabricate dissolvable polyacrylamide beads, by crosslinking acrylamide with disulfide bridges that can be cleaved with dithiothreitol. The beads can be rapidly dissolved in drops and release DNA barcode primers. The dissolvable beads are easy to synthesize, and the primer cost for the beads is significantly lower than that for the previous barcoding beads. Furthermore, the dissolvable beads can be loaded into drops with >95% loading efficiency of a single bead per drop and the dissolution of beads does not influence reverse transcription or the polymerase chain reaction (PCR) in drops. Based on this approach, the dissolvable beads are used for single cell RNA and protein analysis. [ABSTRACT FROM AUTHOR]

The effects of oxygen-enriched atmosphere on the morphological evolution of soot emitted from a methane co-flow laminar diffusion flame were studied using a 12-μm SiC fiber deposition sampling method combined with field emission scanning electron microscopy (FESEM) analysis. The temperature distribution and the soot morphological evolution along the flame radial and axial directions at different oxygen concentrations were systematically investigated. Results showed that the soot morphology was strongly dependent on its position and oxygen concentration in flames. At the same flame height, the soot morphology changed significantly when the oxygen concentration increased from 21% to 31%. The soot generation rate increased rapidly under the elevated oxidative condition, and the position of soot inception was closer to the burner nozzle. As the flame height and oxygen concentration increased, soot particles in the flame centerline were enlarged and evolved to fiber-like depositions. Furthermore, the large clusters of soot particles gradually evolved to even denser spongy and fibrous particles around the flame edges. In addition, unique sponge-like soot deposits were observed for the first time in methane flames. Image 1 • Morphological evolution of flame-generated soot was studied in 2-D dimension. • Oxygen concentration could influence soot morphological evolution dramatically. • SiC fiber method combined with FESEM is suitable for analyzing soot morphology. [ABSTRACT FROM AUTHOR]

The effect of oxygen concentrations on the formation and evolution of soot particles was investigated by analyzing soot morphology using SiC fiber deposition technique and thermophoretic sampling method in a co-flow diffusion ethylene flame. Soot particles were examined via transmission electron microscopy at different heights along the flame centerline. Results show that the flame temperature exhibits a bimodal distribution. As the flame height increases, the flame distribution gradually changes from bimodal to unimodal, and the increase in oxygen concentration not only causes the flame height to decrease, but also causes the bimodal distribution of the flame more pronounced. The morphological evolution of soot deposits are strongly dependent on the oxygen concentration, radial and axial position, and flame temperature. Soot deposits along the flame centerline begin to be oxidized into dense flocculent and fibrous mesh structures with the flame temperature increases. In front of the flame, the oxidation is enhanced with temperature rise at the same height, resulting in more dense morphology of the soot deposits and the decrease in primary particle size. The results of thermophoretic sampling show that soot growth undergoes various stages of nucleation, growth, coagulation, agglomeration and oxidation, and the average particle size distributions of soot increase first and then decrease. The increase in oxygen concentration leads to advances in all stages of soot formation, including surface growth, agglomeration and oxidation. Additionally, the flame temperatures increase sharply as the increase of flame heights, leading to the soot aggregates to be oxidized to loose chain-like agglomerates. • Two sampling methods were used for studying soot evolution. • Soot morphological evolution could be influenced by oxygen volume fraction. • Primary particle size exhibited a non-monotonic trend with sampling height. [ABSTRACT FROM AUTHOR]

Electrochemical machining (ECM) is a cost-effective method for the machining of difficult-to-cut Inconel 718 superalloy. However, the machining accuracy of ECM is still limited by the poor localization effect due to the existence of stray corrosion. In this paper, a mixed solution of neutral NaNO3 and alkaline NaOH is used to improve the localization effect during ECM of Inconel 718. The potentiodynamic polarization curves and current efficiencies for metal dissolution are measured, and the micro morphologies are examined. The results show that the use of an alkaline solution can promote the formation of a compact passive film on the surface of Inconel 718. ECM tests with cylindrical electrodes are specially designed to verify the effect of alkaline solution on the localization of anodic dissolution. The experimental results indicated that the stray corrosion of the non-machined surface of Inconel 718 alloy can be effectively eliminated by using a mixed solution of NaNO3 and NaOH. The surface roughness of the non-machined area can be noticeably improved. [ABSTRACT FROM AUTHOR]

Types of binding with DNA and pharmacologic activity of 1,10-phenanthroline and electron-rich 1,10-phenanthrocyanine complexes of d-elements are discussed. The relationship of the electronic and geometric structure of 1,10-phenanthroline complexes of transition metals to their interaction with DNA molecules is analyzed. The concept of redox-mediated antibacterial, antiviral, and antitumor activity of 1,10-phenanthroline complexes of d-elements is formulated. [ABSTRACT FROM AUTHOR]