Search

Magnesium (Mg)-based alloys have the potential for bone repair due to their properties of biodegradation, biocompatibility, and structural stability, which can eliminate the requirement for a second surgery for the removal of the implant. Nevertheless, uncontrolled degradation rate and possible cytotoxicity of the corrosion products at the implant sites are known current challenges for clinical applications. In this study, we assessed in vitro cytotoxicity of different concentrations (0 to 50 mM) of possible corrosion products in the form of magnesium oxide (MgO) and magnesium hydroxide (Mg(OH)2) nanoparticles (NPs) in human fetal osteoblast (hFOB) 1.19 cells. We measured cell proliferation, adhesion, migration, and cytotoxicity using a real-time, label-free, non-invasive electric cell-substrate impedance sensing (ECIS) system. Our results suggest that 1 mM concentrations of MgO/Mg(OH)2 NPs are tolerable in hFOB 1.19 cells. Based on our findings, we propose the development of innovative biodegradable Mg-based alloys for further in vivo animal testing and clinical trials in orthopedics. [ABSTRACT FROM AUTHOR]

Biodegradable magnesium (Mg) alloys have potential applications in orthopedic implants due to their mechanical and osseointegration properties. However, the surface characteristics, biocompatibility, and toxicity of the released corrosion products in the form of magnesium oxide (MgO) and magnesium hydroxide (Mg(OH)2) nanoparticles (NPs) at the junction of implants and in the surrounding tissue are not completely understood. Here, we investigated in vitro cytotoxicity and morphological changes in human fetal osteoblast (hFOB) 1.19 cells in response to various concentrations (1 mM, 5 mM, 10 mM, and 50 mM) of MgO/Mg(OH)2 NPs by live/dead assay and scanning electron microscopy (SEM). In this study, we performed a surface characterization of MgO/Mg(OH)2 NPs to evaluate the size of the NPs. Further, an immersion test was performed in Dulbecco's Modified Eagle's Medium (DMEM) with randomly selected various concentrations (1 mM, 5 mM, 10 mM, 50 mM, and 100 mM) of MgO/Mg(OH)2 NPs to understand the degradation behavior of the NPs, and the change in the pH values from days 1 to 7 was measured. After conducting an immersion test for seven days, the highest concentration (100 mM) of MgO/Mg(OH)2 NPs was selected to study the element depositions on nanoparticles through scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM–EDX) mapping. The results from this in vitro cytotoxicity study suggest that less than or equal to 5-mM concentrations of MgO/Mg(OH)2 NPs are tolerable concentrations for hFOB 1.19 cells. This study provides a foundational knowledge of MgO/Mg(OH)2 NP cytotoxicity in hFOB 1.19 cells that can help to develop future sustainable biodegradable magnesium-based alloys for orthopedic applications. [ABSTRACT FROM AUTHOR]

Exposure to hog barn organic dust contributes to occupational lung diseases, which are mediated by inflammatory and oxidative stress pathways. Isoprostanes—a family of eicosanoids produced by oxidation of phospholipids by oxygen radicals—are biomarkers of pulmonary oxidative stress. Importantly, 8-isoprostane has been implicated as a key biomarker and mediator of oxidative stress because it is a potent pulmonary vasoconstrictor. Antioxidants found in fruits and vegetables hold promise for preventing or reducing effects of oxidative stress-related diseases including chronic bronchitis and chronic obstructive pulmonary disease (COPD). Here, we investigated 8-isoP and oxidant production by organic dust-exposed airway epithelial cells and the inhibitory effects of an extract from calyces of the sorrel plant, Hibiscus sabdariffa, on oxidant-producing pathways. Confluent cultures of normal human tracheobronchial epithelial cells were pretreated or not with 1% sorrel extract prior to 5% dust extract (DE) exposure. Following DE treatments, live cells, cell-free supernatants, or cell extracts were evaluated for the presence of 8-isoprostane, superoxide, hydrogen peroxide, nitric oxide, hydroxyl radical, peroxynitrite, and catalase activity to evaluate sorrel's inhibitory effect on oxidative stress. The well-known radical scavenging antioxidant, N-acetyl cysteine (NAC), was used for comparisons with sorrel. DE exposure augmented the production of all radicals measured including 8-isoprostane (p value < 0.001), which could be inhibited by NAC or sorrel. Among reactive oxygen and nitrogen species generated in response to DE exposure, sorrel had no effect on H2O2 production and NAC had no significant effect on NO⋅ production. The observations reported here suggest a possible role for sorrel in preventing 8-isoprostane and oxidant-mediated stress responses in bronchial epithelial cells exposed to hog barn dust. These findings suggest a potential role for oxidative stress pathways in mediating occupational lung diseases and antioxidants within sorrel and NAC in reducing dust-mediated oxidative stress within the airways of exposed workers. [ABSTRACT FROM AUTHOR]

Synthetic grafts comprised of a porous scaffold in the size and shape of the natural tracheobronchial tree, and autologous stem cells have shown promise in the ability to restore the structure and function of a severely damaged airway system. For this specific application, the selected scaffold material should be biocompatible, elicit limited cytotoxicity, and exhibit sufficient mechanical properties. In this research, we developed composite nanofibers of polycaprolactone (PCL) and depolymerized chitosan using the electrospinning technique and assessed the properties of the fibers for its potential use as a scaffold for regenerating tracheal tissue. Water-soluble depolymerized chitosan solution was first prepared and mixed with polycaprolactone solution making it suitable for electrospinning. Morphology and chemical structure analysis were performed to confirm the structure and composition of the fibers. Mechanical testing of nanofibers demonstrated both elastic and ductile properties depending on the ratio of PCL to chitosan. To assess biological potential, porcine tracheobronchial epithelial (PTBE) cells were seeded on the nanofibers with composition ratios of PCL/chitosan: 100/0, 90/10, 80/20, and 70/30. Transwell inserts were modified with the nanofiber membrane and cells were seeded according to air–liquid interface culture techniques that mimics the conditions found in the human airways. Lactase dehydrogenase assay was carried out at different time points to determine cytotoxicity levels within PTBE cell cultures on nanofibers. This study shows that PCL/chitosan nanofiber has sufficient structural integrity and serves as a potential candidate for tracheobronchial tissue engineering. [ABSTRACT FROM PUBLISHER]

The biodegradable ability of magnesium alloys is an attractive feature for tracheal stents since they can be absorbed by the body through gradual degradation after healing of the airway structure, which can reduce the risk of inflammation caused by long-term implantation and prevent the repetitive surgery for removal of existing stent. In this study, the effects of bicarbonate ion (HCO3-) and mucin in Gamble's solution on the corrosion behavior of AZ31 magnesium alloy were investigated, using immersion and electrochemical tests to systematically identify the biodegradation kinetics of magnesium alloy under in vitro environment, mimicking the epithelial mucus surfaces in a trachea for development of biodegradable airway stents. Analysis of corrosion products after immersion test was performed using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD). Electrochemical impedance spectroscopy (EIS) was used to identify the effects of bicarbonate ions and mucin on the corrosion behavior of AZ31 magnesium alloys with the temporal change of corrosion resistance. The results show that the increase of the bicarbonate ions in Gamble's solution accelerates the dissolution of AZ31 magnesium alloy, while the addition of mucin retards the corrosion. The experimental data in this work is intended to be used as foundational knowledge to predict the corrosion behavior of AZ31 magnesium alloy in the airway environment while providing degradation information for future in vivo studies. [ABSTRACT FROM AUTHOR]

Magnesium (Mg) based alloys are the most advanced cardiovascular stent materials. This new generation of stent scaffold is currently under clinical evaluation with encouraging outcomes. All these Mg alloys contain a certain amount of rare earth (RE) elements though the exact composition is not yet disclosed. RE alloying can usually enhance the mechanical strength of different metal alloys but their toxicity might be an issue for medical applications. It is still unclear how RE elements will affect the magnesium (Mg) alloys intended for stent materials as a whole. In this study, we evaluated MgZnCaY-1RE, MgZnCaY-2RE, MgYZr-1RE, and MgZnYZr-1RE alloys for cardiovascular stents applications regarding their mechanical strength, corrosion resistance, hemolysis, platelet adhesion/activation, and endothelial biocompatibility. The mechanical properties of all alloys were significantly improved. Potentiodynamic polarization showed that the corrosion resistance of four alloys was at least 3–10 times higher than that of pure Mg control. Hemolysis test revealed that all the materials were non-hemolytic while little to moderate platelet adhesion was found on all materials surface. No significant cytotoxicity was observed in human aorta endothelial cells cultured with magnesium alloy extract solution for up to seven days. Direct endothelialization test showed that all the alloys possess significantly better capability to sustain endothelial cell attachment and growth. The results demonstrated the promising potential of these alloys for stent material applications in the future. [ABSTRACT FROM AUTHOR]

Tracheomalacia is a relatively rare problem, but can be challenging to treat, particularly in pediatric patients. Due to the presence of mechanically deficient cartilage, the trachea is unable to resist collapse under physiologic pressures of respiration, which can lead to acute death if left untreated. However, if treated, the outcome for patients with congenital tracheomalacia is quite good because the cartilage tends to spontaneously mature over a period of 12 to 18 months. The present study investigated the potential for the use of degradable magnesium-3% yttrium alloy (W3) to serve as an extraluminal tracheal stent in a canine model. The host response to the scaffold included the formation of a thin, vascularized capsule consisting of collagenous tissue and primarily mononuclear cells. The adjacent cartilage structure was not adversely affected as observed by bronchoscopic, gross, histologic, and mechanical analysis. The W3 stents showed reproducible spatial and temporal fracture patterns, but otherwise tended to corrode quite slowly, with a mix of Ca and P rich corrosion product formed on the surface and observed focal regions of pitting. The study showed that the approach to use degradable magnesium alloys as an extraluminal tracheal stent is promising, although further development of the alloys is required to improve the resistance to stress corrosion cracking and improve the ductility. © 2013 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 102A: 611-620, 2014. [ABSTRACT FROM AUTHOR]

A bottom-up based pulsed laser deposition technique has been used to grow titanium nitride (TiN) nanowires on single crystalline substrates. The first step of this method is the dissolution of laser ablated gaseous TiN material in the nanodimensional catalytic gold (Au) liquid islands located on the substrate surfaces. The continuous dissolution of TiN results in the supersaturation of liquid Au with TiN followed by extrusion of solid TiN material in the nanowire form at the liquid/solid interface. The growth of TiN nanowires continues as long as its dissolution rate into the catalyst Au matches the extrusion rate of solid TiN. This bottom-up approach gives rise to a one-dimensional TiN nanowire structures (length: 200-300 nm and diameter: 20-30 nm) capped with Au. The ascent of Au nanodots to the top of TiN nanowires can be explained based on breaking of weaker bonds and building of stronger bonds. The TiN nanowires are provided vertical alignment by selecting a plane of the substrate that provides the least lattice mismatching to the (111) plane of TiN which has lower surface energy than its other planes: (100) or (110). After the successful formation and structural characterization, a lactate dehydrogenase (LDH) release assay has been used to confirm the biocompatibility and cytotoxicity of these nanowires. © 2012 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2012. [ABSTRACT FROM AUTHOR]

Repetitive exposure to bioaerosols in swine production facilities (SPF) promotes respiratory dysfunction in workers and animals. An adequate understanding of the impact of the SPF environment on pulmonary physiology is needed. However, there is currently no sufficient ex vivo model to investigate the cause for agriculture-related lung disease. The precision cut lung slices (PCLS) technique represents a practical and useful procedure for ex vivo studies. Our goal was to use the PCLS technique to develop a model of agriculture-related lung diseases using a physiologically relevant animal model, the domesticated pig. Freshly prepared pig lung tissue cores were sectioned into 300 µm slices and viability was measured by lactate dehydrogenase activity and live/dead staining. Airway contractility in response to a methacholine (MCh) dose gradient (10 -7 -10 -4 M) was measured. After the last MCh dose, PCLS were incubated with 1 mM chloroquine to allow airways to relax. Time-lapse images were taken every minute for 35 minutes and used to determine airway lumen area changes. Porcine PCLS remained viable and demonstrated metabolic activity for three days. PCLS from indoor and outdoor pigs contracted in response to MCh exposure and relaxed when incubated with chloroquine. Notably, PCLS of indoor pigs showed greater airway constriction in response to 10 -5 M MCh exposure compared to outdoor pig PCLS (P<0.05). These data suggest that exposure to the indoor pig production environment may be associated with hyperresponsiveness in swine airways, and support future studies to investigate lung response to inflammatory substances using the porcine PCLS model., Competing Interests: None., (AJTR Copyright © 2020.)

Exposure to indoor swine production facilities (SPF) environments causes airway inflammation and diseases including asthma, chronic bronchitis and chronic obstructive pulmonary disease (COPD) in facility workers. However, less is known about the impact of SPF exposures on the respiratory health of pigs. Respiratory symptoms are associated with repeat exposure to SPF, specifically inhalation of organic dust and other air pollutants therein. A thorough understanding of the molecular pathways regulated by SPF exposure is needed to understand airway inflammation and chronic inflammatory lung disease. The present study measured the expression of proteins associated with oxidative stress and antioxidant defenses in the tracheal epithelial tissues of pigs reared in SPF or on pasture. Proteome profiler cell stress arrays, western blotting and enzyme activity assays were utilized to measure protein expression and activity levels in tracheal epithelial tissue extracts of pigs. It was determined that pigs raised in SPF express significantly less enzymatic antioxidants, including superoxide dismutase (SOD), within their tracheal epithelial tissues compared to pasture raised pigs. Concomitantly, tracheal epithelial tissues of SPF raised pigs had lower SOD and catalase antioxidant activity levels compared to pasture raised pigs. The observations summarized herein provide evidence that exposure to swine production environments influence endogenous enzymatic antioxidant defenses within the tracheal epithelial tissues of pigs. This study offers insight for understanding the effect of continuous exposure to SPF pollutants on endogenous antioxidant defenses in the airway epithelial and may be helpful in understanding human airway responses to swine barn exposures., Competing Interests: None., (AJTR Copyright © 2019.)

Synthetic grafts comprised of a porous scaffold in the size and shape of the natural tracheobronchial tree, and autologous stem cells have shown promise in the ability to restore the structure and function of a severely damaged airway system. For this specific application, the selected scaffold material should be biocompatible, elicit limited cytotoxicity, and exhibit sufficient mechanical properties. In this research, we developed composite nanofibers of polycaprolactone (PCL) and depolymerized chitosan using the electrospinning technique and assessed the properties of the fibers for its potential use as a scaffold for regenerating tracheal tissue. Water-soluble depolymerized chitosan solution was first prepared and mixed with polycaprolactone solution making it suitable for electrospinning. Morphology and chemical structure analysis were performed to confirm the structure and composition of the fibers. Mechanical testing of nanofibers demonstrated both elastic and ductile properties depending on the ratio of PCL to chitosan. To assess biological potential, porcine tracheobronchial epithelial (PTBE) cells were seeded on the nanofibers with composition ratios of PCL/chitosan: 100/0, 90/10, 80/20, and 70/30. Transwell inserts were modified with the nanofiber membrane and cells were seeded according to air-liquid interface culture techniques that mimics the conditions found in the human airways. Lactase dehydrogenase assay was carried out at different time points to determine cytotoxicity levels within PTBE cell cultures on nanofibers. This study shows that PCL/chitosan nanofiber has sufficient structural integrity and serves as a potential candidate for tracheobronchial tissue engineering.

The biodegradable ability of magnesium alloys is an attractive feature for tracheal stents since they can be absorbed by the body through gradual degradation after healing of the airway structure, which can reduce the risk of inflammation caused by long-term implantation and prevent the repetitive surgery for removal of existing stent. In this study, the effects of bicarbonate ion (HCO₃ - ) and mucin in Gamble's solution on the corrosion behavior of AZ31 magnesium alloy were investigated, using immersion and electrochemical tests to systematically identify the biodegradation kinetics of magnesium alloy under in vitro environment, mimicking the epithelial mucus surfaces in a trachea for development of biodegradable airway stents. Analysis of corrosion products after immersion test was performed using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD). Electrochemical impedance spectroscopy (EIS) was used to identify the effects of bicarbonate ions and mucin on the corrosion behavior of AZ31 magnesium alloys with the temporal change of corrosion resistance. The results show that the increase of the bicarbonate ions in Gamble's solution accelerates the dissolution of AZ31 magnesium alloy, while the addition of mucin retards the corrosion. The experimental data in this work is intended to be used as foundational knowledge to predict the corrosion behavior of AZ31 magnesium alloy in the airway environment while providing degradation information for future in vivo studies.

Magnesium (Mg) based alloys are the most advanced cardiovascular stent materials. This new generation of stent scaffold is currently under clinical evaluation with encouraging outcomes. All these Mg alloys contain a certain amount of rare earth (RE) elements though the exact composition is not yet disclosed. RE alloying can usually enhance the mechanical strength of different metal alloys but their toxicity might be an issue for medical applications. It is still unclear how RE elements will affect the magnesium (Mg) alloys intended for stent materials as a whole. In this study, we evaluated MgZnCaY-1RE, MgZnCaY-2RE, MgYZr-1RE, and MgZnYZr-1RE alloys for cardiovascular stents applications regarding their mechanical strength, corrosion resistance, hemolysis, platelet adhesion/activation, and endothelial biocompatibility. The mechanical properties of all alloys were significantly improved. Potentiodynamic polarization showed that the corrosion resistance of four alloys was at least 3-10 times higher than that of pure Mg control. Hemolysis test revealed that all the materials were non-hemolytic while little to moderate platelet adhesion was found on all materials surface. No significant cytotoxicity was observed in human aorta endothelial cells cultured with magnesium alloy extract solution for up to seven days. Direct endothelialization test showed that all the alloys possess significantly better capability to sustain endothelial cell attachment and growth. The results demonstrated the promising potential of these alloys for stent material applications in the future.

A rapid method for collection of Pasteuria penetrans endospores was developed. Roots containing P. penetrans-infected root-knot nematode females were softened by pectinase digestion, mechanically processed, and filtered to collect large numbers of viable endospores. This method obviates laborious handpicking of Pasteuria-infected females and yields endospores competent to attach to and infect nematodes. Endospores are suitable for morphology studies and DNA preparations.