Search

A process for dewatering spent ion exchange resins (gel and porous) used in nuclear power plants by supercritical CO2 (sCO2) is described. The amount of water removed by sCO2 is much higher than that expected from solubility considerations alone. Water from gel-type resins is both dissolved by and emulsified in sCO2. Emulsification also occurs in the absence of solids when water alone is contacted by sCO2. It is not a factor for microporous resins where an additional mechanism, viscous fingering, is involved. It appears that bulk water is emulsifiable but not if it is held in pores. Dewatering via viscous fingering has been previously invoked for matrices such as wood and sludge. The resins can be dewatered and dried with sequential batches of sCO2 at sub-boiling temperatures. The CO2 can then be potentially reused after expansion and separation from the entrained water. Partial decompression of the water-laden sCO2 would lead to cooling, which would drop the water solubility substantially. A reduction of temperature from 90 oC to 65oC reduces the solubility of water in sCO2 by a factor of five. The condensed water could then be separated with a hydrocyclone. The footprint of sCO2 is much smaller than the conventional drying process. The energy costs are also much lower because evaporation of water is avoided. [ABSTRACT FROM AUTHOR]

A process for dewatering spent ion exchange resins (gel and porous) used in nuclear power plants by supercritical CO2 (sCO2) is described. The amount of water removed by sCO2 is much higher than that expected from solubility considerations alone. Water from gel-type resins is both dissolved by and emulsified in sCO2. Emulsification also occurs in the absence of solids when water alone is contacted by sCO2. It is not a factor for microporous resins where an additional mechanism, viscous fingering, is involved. It appears that bulk water is emulsifiable but not if it is held in pores. Dewatering via viscous fingering has been previously invoked for matrices such as wood and sludge. The resins can be dewatered and dried with sequential batches of sCO2 at sub-boiling temperatures. The CO2 can then be potentially reused after expansion and separation from the entrained water. Partial decompression of the water-laden sCO2 would lead to cooling, which would drop the water solubility substantially. A reduction of temperature from 90 oC to 65oC reduces the solubility of water in sCO2 by a factor of five. The condensed water could then be separated with a hydrocyclone. The footprint of sCO2 is much smaller than the conventional drying process. The energy costs are also much lower because evaporation of water is avoided. [ABSTRACT FROM AUTHOR]

With the increasing need for bio‐based materials developed by environmentally friendly procedures, this work shows a green method to develop shape‐controlled structures from cellulose dissolving pulp coated by chitosan. This material was then tested to adsorb a common and widespread pollutant, 2,4‐dichlorophenol under different pH conditions (5.5 and 9). Herein it was noticed that the adsorption only occurred in acidic pH (5.5) where electrostatic interaction drove the adsorption, demonstrating the potential to tune the response under desired conditions only. The adsorption was successful in the hydrogel structure with an adsorption capacity of 905 ± 71 mg/g from a solution with 16.6 ppm; furthermore, adsorption was also possible with dried hydrogel structures, presenting a maximum of adsorption of 646 ± 50 mg/g in a similar 16.6 ppm solution. Finally, adsorbent regeneration was successfully tested for both, dry (rewetted) and never‐dried states, showing improved adsorption after regeneration in the case of the never dried hydrogel structures. [ABSTRACT FROM AUTHOR]

Gelatin and chitosan polysaccharides were chemically modified to get methacrylate functionality to obtain biocompatible hydrogels for use as tissue engineering scaffolds. The methacrylation reaction was verified by 1H‐NMR. The degree of methacrylation was varied from 7% to 40% by changing the molar ratio of polysaccharide to methacrylic anhydride and the type of polysaccharide utilized. After the modification, polysaccharide‐based hydrogels were prepared by free‐radical polymerization in the presence of UV light and Irgacure 184 as a photoinitiator. The physical, chemical, and mechanical performances of the hydrogels were further characterized. Also, the biodegradability and the viability of the polysaccharide hydrogels were investigated using fibroblast cells. These cells were seeded directly onto the hydrogel surface, populated the entirety of the hydrogel, and remained viable for up to 1 week. Altogether, the modified polysaccharides exhibit the properties which make them crucial for applications in the field of regenerative medicine. [ABSTRACT FROM AUTHOR]

Biocatalytic pulp fibers were prepared using surface functionalization of bleached kraft pulp with amino groups (F) and further immobilization of a cross-linked glucose oxidase (G*) from Aspergillus niger. The cross-linked enzymes (G*) were characterized using X-ray spectroscopy, Fourier transform infrared spectroscopy, dynamic scanning calorimetry, and dynamic light scattering. According to standard assays, the G* content on the resulting fibers (FG*) was of 11 mg/g of fiber, and enzyme activity was of 215 U/g. The results from confocal- and stimulated emission depletion microscopy techniques demonstrated that glucose oxidase do not penetrate the interlayers of fibers. The benefit of pulp fiber functionalization was evident in the present case, as the introduction of amino groups allowed the immobilization of larger amount of enzymes and rendered more efficient systems. Using the approach described on this paper, several advanced materials from wood pulp fibers and new bioprocesses might be developed by selecting the correct enzyme for the target applications. [ABSTRACT FROM AUTHOR]

With increasing global water temperatures and nutrient runoff in recent decades, the blooming season of algae lasts longer, resulting in toxin concentrations that exceed safe limits for human consumption and for recreational use. From the different toxins, microcystin-LR has been reported as the main cyanotoxin related to liver cancer, and consequently its abundance in water is constantly monitored. In this work, we report a methodology for decorating cellulose nanofibrils with β-cyclodextrin or with poly(β-cyclodextrin) which were tested for the recovery of microcystin from synthetic water. The adsorption was followed by Quartz Crystal Microbalance with Dissipation monitoring (QCM-D), allowing for real-time monitoring of the adsorption behavior. A maximum recovery of 196 mg/g was obtained with the modified by cyclodextrin. Characterization of the modified substrate was confirmed with Fourier Transform Infrared Spectroscopy (FT-IR), X-ray Photoelectron Spectroscopy (XPS), Thermogravimetric Analysis (TGA), and Atomic Force Microscopy (AFM). [ABSTRACT FROM AUTHOR]

Supercritical CO 2 (sCO 2 ) dehydrates desiccants such as silica gel, activated carbon, graphite, and molecular sieve by dissolving and emulsifying the water. Despite differences in the surface area of these desiccants, the amount of water removed under comparable conditions is the same. The main advantage of sCO 2 dewatering over conventional hot-air regeneration lies in situations where the exhaust contains environmentally sensitive components, e.g., in nuclear detritiation operations where the small footprint and closed cycle benefits of the sCO 2 process are especially significant. Calculations show that depressurizing the spent sCO 2 to half its initial pressure drops out most of the water, after which the CO 2 can be repressurized and reused. sCO 2 dewatering requires about half the energy needed for thermal drying because the water is removed nonevaporatively., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Malaria is responsible for over 435,000 deaths annually, mostly occurring in sub-Saharan Africa. Detecting Plasmodium spp. sporozoites (spzs) in the salivary glands of Anopheles (Diptera: Culicidae) vectors with circumsporozoite enzyme-linked immunosorbent assay (csELISA) is an important surveillance method. However, current technological advances are intellectual property and often require of distribution and highly trained users. The transition into paper-based rapid plataforms would allow for decentralization of survillance, especially in areas where it was virtually eliminated. The addition of bio-based materials have shown the potential to improve binding of target antigens, while being widely available. Here, we evaluate the use of chitosan and cellulose nanocrystals (CNC) as antibody carriers and substrate coatings on 96-well plates and on wax hydrophobized paper plates for the detection of Plasmodium falciparum (Pf), P. vivax VK210 (Pv210), and P. vivax VK247 (Pv247). To further improve the user-friendliness of the paper plates a quantitative photograph image-based color analysis was done. Interactions between the materials and the assay antibodies were studied by quartz crystal microbalance with dissipation monitoring (QCM-D). Overall, the addition of chitosan increased the interaction with antibodies and enhanced signaling in all tests. This work demonstrated that the adaptation of a PcsELISA shows potential as a cost-effective alternative assay platform easily adaptable in deployable testing sites that also showed reduction in reagent volumes by 80% and assay run time by seventh. While dipstick assays were previously developed, paper-based assays are a cost-effective and field-deployable alternative, reducing volumes of reagents that could be used in malaria control and elimination settings., (Published by Oxford University Press on behalf of Entomological Society of America 2023.)