Search

W-beam guardrail is an excellent method for enhancing traffic safety. The W-beam guardrail comprises of a W-shaped segment and specialized constructions known as support posts. Identifying the effect of the W-beam heights, post spacing, shaped supporting posts, and post-soil interaction may be crucial to improving the crashworthiness of W-beam guardrail. This study evaluated the W-beam guardrail using a finite element model in the event of a 10,000 kg truck collision. Simulations of crash tests were conducted to evaluate the crashworthiness of the W-beam guardrail in accordance with European standard EN1317. The results of this analysis can assist evaluate the design of W-guardrails and guide the future development of guardrail technologies.

The advent of three-dimensional (3D) bioprinting offers a feasible approach to construct complex structures for soft tissue regeneration. Carboxymethyl cellulose (CMC) has been emerging as a very promising biomaterial for 3D bioprinting. However, due to the inability to maintain the post-printed stability, CMC needs to be physically blended and/or chemically crosslinked with other polymers. In this context, this study presents the combination of CMC with xanthan gum (XG) and hyaluronic acid (HA) to formulate a multicomponent bioink, leveraging the printability of CMC and XG, as well as the cellular support properties of HA. The ionic crosslinking of printed constructs with iron(III) via the metal-ion coordination between ferric cations and carboxylate groups of the three polymers was introduced to induce improved mechanical strength and long-term stability. Moreover, immortalized human epidermal keratinocytes (HaCaT) and human foreskin fibroblasts (HFF) encapsulated within iron-crosslinked printed hydrogels exhibited excellent cell viability (more than 95%) and preserved morphology. Overall, the presented study highlights that the combination of these three biopolymers and the ionic crosslinking with ferric ions is a valuable strategy to be considered for the development of new and advanced hydrogel-based bioinks for soft tissue engineering applications. [ABSTRACT FROM AUTHOR]

The research community has witnessed an exceptional increase in exploring graphene related two-dimensional materials (GR2Ms) in many innovative applications and emerging technologies. However, simple, low-cost, sustainable, and eco-friendly methods to manufacture large quantities and high-quality GR2Ms still remain an unsolved challenge. To address limitations of conventional wet chemical-based exfoliation methods using graphite resources, the top-down irradiation approach has proven to be an ultrafast, effective, and environmentally friendly technology for scalable exfoliation, production, and processing of GR2Ms providing new properties for emerging applications. Significant advancements have been made for preparation of broad range of GR2Ms from graphite, such as graphene, graphene oxide, and reduced graphene oxide, and their doped, functionalized and modified forms over the past two decades, thanks to the availability of photon and ion irradiation techniques, such as microwave, infrared, ultraviolet, solar, x-ray, gamma, laser, and plasma. This review presents recent advances on the application of these various irradiation techniques and highlights their mechanism, differences in properties of prepared GR2Ms, and their advantages and disadvantages in comparison with other conventional methods. The review provides an insight into the irradiation strategies and their prospective applications to produce, at a large scale, low-cost, high-quality GR2Ms for practical applications in transparent electrodes, optoelectronic devices, sensors, supercapacitors, protective coatings, conductive inks, and composites. [ABSTRACT FROM AUTHOR]

Herein, the visible light‐photocatalytic performance of synthesized ZnO/Gr composite materials with different Gr content under various conditions, i.e., pH, dye concentration, and different scavengers (to understand the photocatalytic activity mechanism) is systematically investigated. Photocatalytic performance is evaluated with the degradation of methylene blue (MB) in solution under sunlight irradiation. The presence of graphene (Gr) in the ZnO/Gr composites shows enhanced photocatalytic activity compared to pure ZnO under natural sunlight illumination. The highest photodegradation efficiency of ≈94% when the content of Gr is 1 wt% in comparison to ≈76% for the pure ZnO, corresponding to reaction rate constants of 0.01038 and 0.00615 min−1, respectively. Compared to recent publications, the degradation efficiency is high with relatively high dye concentration, low catalyst amount, and large solution volume. The enhanced visible light absorption and the reduction of bandgap value are attributed to the enhanced photocatalytic properties of the hybridized composite. Moreover, the investigation of the effect of scavenger substances shows that H2O2 strongly enhanced their photocatalytic ability, suggesting that holes (h+) contribute as the reactive agent in the photodegradation process. [ABSTRACT FROM AUTHOR]

Occult hepatitis B infection (OBI) is characterized by the presence of low levels of hepatitis B virus (HBV) DNA and undetectable HBsAg in the blood. The prevalence of OBI in blood donors in Asia ranges from 0.013% (China) to 10.9% (Laos), with no data available from Vietnam so far. We aimed to investigate the prevalence of OBI among Vietnamese blood donors. A total of 623 (114 women and 509 men) HBsAg-negative blood donors were screened for anti-HBc and anti-HBs by ELISA assays. In addition, DNA from sera was isolated and nested PCR was performed for the HBV surface gene (S); a fragment of the S gene was then sequenced in positive samples. The results revealed that 39% (n = 242) of blood donors were positive for anti-HBc, and 70% (n = 434) were positive for anti-HBs, with 36% (n = 223) being positive for both anti-HBc and anti-HBs. In addition, 3% of blood donors (n = 19) were positive for anti-HBc only, and 34% (n = 211) had only anti-HBs as serological marker. A total of 27% (n = 170) were seronegative for any marker. Two of the blood donors (0.3%) were OBI-positive and sequencing revealed that HBV sequences belonged to HBV genotype B, which is the predominant genotype in Vietnam. [ABSTRACT FROM AUTHOR]

Wearable sensors are currently one of the top emerging areas with enormous growth potential. Low‐cost fabrication techniques using simple and scalable printing technologies are making a significant impact on their development. Recent advances in high‐performance gas/vapor sensors based on carbon nanomaterials have shown potential applications ranging from disease diagnostics to environmental monitoring and defences. Herein, a hybrid sensing material of 1D carbon nanotubes (CNTs) and 2D graphene is developed, and a conductive ink is formulated, which is applied for fabricating a nitrogen dioxide (NO2) gas sensor array within a compact design utilizing extrusion printing. To improve NO2‐sensing performance and optimal operating temperature, a reverse‐side layer is designed, which combines MXene and poly(3,4‐ethylenedioxythiophene)‐doped poly(styrene sulfonate) (PEDOT:PSS), and functions as a Joule heater. The printed CNT–graphene‐based sensor with an embedded MXene/PEDOT:PSS heater is capable of detecting trace amounts of NO2 gas (1 ppm) at 65 °C. The sensor is able to distinguish between various gases/volatile organic compounds and target NO2 gas based on their chemical affinities. The printed CNT–graphene sensor array also demonstrates a high‐level of recoverability, satisfied stability, durability, and reproducibility, which render this sensor a suitable candidate for practical applications. [ABSTRACT FROM AUTHOR]

Plasma electrolytic oxidation (PEO) is a well-established technique for the treatment of titanium-based materials. The formed titania-PEO surface can improve the osseointegration properties of titanium implants. Nevertheless, it can not address bacterial infection problems associated with bone implants. Recently, 2-dimensional (2D) materials such as graphene oxide (GO), MXene, and hexagonal boron nitride (hBN) have received considerable attention for surface modifications showing their antibacterial properties. In this paper, a comparative study on the effect of partial deposition of these three materials over PEO titania substrates on the antibacterial efficiency and bioactivity is presented. Their partial deposition through drop-casting instead of continuous film coating is propsed to simultaneously address both antibacterial and osseointegration abilities. Our results demonstrate the dose-dependent nature of the deposited antibacterial agent on the PEO substrate. GO–PEO and MXene–PEO samples showed the highest antibacterial activity with 70 (±2) % and 97 (±0.5) % inactivation of S. aureus colonies in the low concentration group, respectively. Furthermore, only samples in the higher concentration group were effective against E. coli bacteria with 18 (±2) % and 17 (±4) % decrease in numbers of colonies for hBN–PEO and GO–PEO samples, respectively. Moreover, all antibacterial samples demonstrated acceptable bioactivity and good biocompatibility, making them a considerable candidates for the next generation of antibacterial titanium implants. [ABSTRACT FROM AUTHOR]