Search

A new method to estimate the Teager energy (TE) is presented here which uses an instantaneous energy expression and the Hilbert–Huang transform (HHT). The energy expression depends on the square of the instantaneous amplitude and digital frequency of the signal. This energy of the signal is estimated from the instantaneous energies of the intrinsic mode functions (IMFs), obtained from the HHT. The energy expression used for the TE ensures that the energy is always positive, and it is in agreement with the energy required to generate a sinusoid. It avoids the limitations in the use of the discrete TE operator (TEO), where for the output of the TEO to be positive and to give energies which match the energy required to generate a sinusoid, the signal must satisfy certain conditions. Numerical study on a data set of neuro‐signals shows that these problems persist even when TEO is applied to the IMFs obtained from the empirical mode decomposition of the signal. Such a procedure is used in the Teager–Huang transform. There is a sharp drop in the number of negative values when IMFs are used, but the number is still not zero. [ABSTRACT FROM AUTHOR]

Research and development has been conducted on a "hands-free" brain wave activity (electroencephalography-based) assistive technology device called the Mind Switch. It has been designed to provide a severely disabled person (such as someone with tetraplegia) with the ability to switch using their brain activity and thus activate devices in the environment. An area of concern has been the time it takes to complete set-up of the system before individual use, as well as the occurrence of errors in switching rates. In order to improve the user friendliness of the system, this study compared the efficacy of detecting electroencephalography (EEG) changes in brain signals that occur with eye closure and used as a "switch", with two different methods of processing the EEG. Using data from spinal cord injured participants, fractal analysis, that is, the change in fractal dimension of the EEG wave during eye closure was compared to the original method of using spectral analysis change. In comparison to the spectral technique, the fractal dimension technique improved set up time, and was substantially improved in reducing the number of false positive and false negative errors when activating the device. Furthermore, the time to switch was also marginally reduced when using fractal dimension processing. Implications for improving the viability of an EEG based environmental control system for the severely neurologically injured are discussed. [ABSTRACT FROM AUTHOR]

Underwater acoustic transient signals are generated mechanically at known positions along a wharf. These signals are received by a wide aperture planar array of four underwater acoustic sensors, whose positions relative to the wharf are unknown. A method is described that enables the positions of the sensors to be estimated from accurate differential time-of-arrival measurements (with 0.1 µs precision) as the signal wavefronts traverse the array. A comparison of the estimated positions with the nominal positions of the first three sensors, which form a 20-m-wide aperture horizontal line array, reveals a 2-cm displacement of the middle sensor from the line array axis. This slight bowing of the line array results in overranging (bias error of 3%) when the wavefront curvature method is used with the nominal collinear sensor positions to locate a static source of active sonar transmissions at a range of 59.2 m. The use of the spherical intersection method coupled with the estimated sensor positions of the line array provides an order of magnitude improvement in the range estimate (within 0.3% of the actual value). However, systematic ranging errors are observed when the sound propagation medium becomes nonstationary. Next, the differences in the arrival times of the direct path and boundary-reflected path signals at the middle sensor of the wide aperture line array are estimated using the differential phase residue of the analytic signal at the sensor output. These multipath delays are used to estimate the range and depth of the source. Although the average value of the multipath range estimates is within 0.5% of the actual value, the variance of the range estimates is 50 times larger when compared with the results of the spherical intersection and wavefront curvature methods. The multipath delay data are also processed to provide a reliable estimate of the temporal variation in the water depth enabling the tidal variation to be observed. [ABSTRACT FROM AUTHOR]

Frequency analysis based on the Hilbert-Huang transform (HHT) is examined as an alternative to Fourier spectral analysis in the study of EEG signals. This method overcomes the need for the EEG signal to be linear and stationary, assumptions necessary for the application of Fourier spectral analysis. The HHT method comprises two components: empirical mode decomposition (EMD) of the signal into intrinsic mode functions (IMF's); and the Hilbert transform of the IMF's. This technique is applied here in the study of consecutive eyes open (EO), eyes closed (EC) EEG signals of able bodied and spinal cord injured participants. The study found that in this EO, EC pair the instantaneous frequencies in the EO state were higher compared to the EC state. The Hilbert weighted frequency, a measure of the mean of the instantaneous frequencies present in an IMF, is used here to detect these changes from EO to the EC state in an EEG signal. Although there was a good detection of this change with information obtained from just one IMF (94% in able-bodied persons and 84% in SCI persons), almost 100% success in detecting between group differences was achieved using all the IMF's. This result has implications for assistive technology that rely on EEG changes in EO and EC states.

Electroencephalography (EEG) signals are often contaminated with artifacts arising from many sources such as those with ocular and muscular origins. Artifact removal techniques often rely on the experience of the EEG technician to detect these artifact components for removal. This paper presents the results comparing an automated procedure (AT) against visually (VT) choosing artifactual components for removal, using second order blind identification (SOBI) and canonical correlation analyses. The results show that the resulting EEG signal after artifact removal for the AT and VT were comparable using a technique that measures the variance amongst electrodes and spectral energy. The AT technique is objective, faster and easier to use, and shown here to be comparable to the standard technique of visually detecting artifact components.

Fatigue is a negative symptom of many illnesses and also has major implications for road safety. This paper presents results using a method called microstate segmentation (MSS). It was used to distinguish changes from an alert to a fatigue state. The results show a significant increase in MSS instantaneous amplitude during the fatigue state. Plotting the linear gradient of the nonlinear part of the phase data from the MSS also showed a significant difference (P<0.01) in the gradients of the alert state compared to the fatigue state. The results suggest that MSS can be used in analyzing spontaneous electroencephalography (EEG) signals to detect changes in physiological states. The results have implications for countermeasures used in detecting fatigue.