Search

Abstract The feasibility of joining laser metal deposited Ti6Al4V sheets using laser beam welding was investigated in this article. The additive manufactured sheets were joined using a 3 kW CW YLS-2000-TR ytterbium laser system. The mechanical properties and microstructure of the welded additive manufactured parts (AM welds) were compared with those of the wrought sheets welded using the same laser process. The welds were characterized and compared in terms of bead geometry, microhardness, tensile strength, fractography, and microstructure. The differences in characteristics are majorly found in the width of the bead and tensile strength. The bead width of AM welds appear wider than the wrought welds, and the wrought welds exhibited higher tensile strength and ductility than the AM welds.

Geothermal energy is predicted to be one of the most important renewable energy sources in the near future. In geothermal energy plants, the secondary products such as the scale containing naturally occurring radioactive material (NORM) and adhering to the surface of equipment produce radiation fields. The workers who maintain and clean such equipment are at a risk to be exposed by the technically enhanced NORM (TENORM). To estimate the risks of radiation exposure to the workers, we assessed internal doses resulting from the cleaning activities on 150 heat exchanging boards used at a geothermal energy plant, focusing on 222 Rn, 226 Ra, 210 Pb, 228 Ra and 228 Th. The experiment was performed with the subjects of workers and office workers as control, supplying prepared foods and drinks. Using the analytical results of 210 Pb, 226 Ra, 228 Ra, and 228 Th in the excretions of subjects, committed effect doses were determined. The annual internal dose for the workers with protective clothing due to the cleaning activities on removing scale, assuming the cleaning activities requires 170 h (standard monthly working time) a year, was obtained as 26 μSv/y and the total dose including 222 Rn inhalation dose was calculated as 323 μSv/y. The additional dose for the cleaning workers was less than the dose limit of 20000 μSv/y for radiation workers, even less than for general population (1000 μSv/y) recommended by International Commission on Radiological Protection (ICRP). However, the elevated inhalation dose for workers conducting cleaning activities may present a health hazard to workers if they deal with excessive materials containing TENORM, work for excessive time or are under inappropriate safety measures., Competing Interests: Declaration of competing interest We declare that we have no competing interests., (Copyright © 2022. Published by Elsevier GmbH.)

The feasibility of joining laser metal deposited Ti6Al4V sheets using laser beam welding was investigated in this article. The additive manufactured sheets were joined using a 3 kW CW YLS-2000-TR ytterbium laser system. The mechanical properties and microstructure of the welded additive manufactured parts (AM welds) were compared with those of the wrought sheets welded using the same laser process. The welds were characterized and compared in terms of bead geometry, microhardness, tensile strength, fractography, and microstructure. The differences in characteristics are majorly found in the width of the bead and tensile strength. The bead width of AM welds appear wider than the wrought welds, and the wrought welds exhibited higher tensile strength and ductility than the AM welds., (© 2022. The Author(s).)

Radiological hazards to the residents of the Gaza Strip, Palestine and the north of the Sinai Peninsula, Egypt, were determined using the naturally occurring radionuclides ( 226 Ra, 232 Th and 40 K) in 69 samples of building materials (demolition debris, plasters, concretes, from recycling plants and raw cements from suppliers), soils and sands collected in the field. The radiological hazard indices and dose rates calculated with the activity concentrations of radionuclides in those materials determined by gamma-ray spectrometry indicate that the values are all within the global limits recommended by the United Nations Scientific Committee on the Effects of Atomic Radiation 2000 and European Commission 1999. The results of Spearman's correlation and hierarchical cluster analysis for 210 Pb in the building materials, soils and sands suggest that the samples include 210 Pb from the atmospheric fallout. The medium correlation between 232 Th and 40 K in demolition debris implies that their activity concentrations are characteristic of the building materials and constituents of the demolition debris. Non-natural ratio of 238 U/ 235 U was found in the soil and sand samples collected in the Gaza Strip. Furthermore, 137 Cs and 241 Am were detected in some soil, sand and demolition debris samples analyzed in this study. The origins of those anthropogenic radionuclides were considered., (© 2021. The Author(s).)

Luminescence dosimetry was performed using bricks from the former settlement of Metlino, Southern Urals, Russia, to investigate the feasibility of validating the Techa River Dosimetry System (TRDS) 2016 for the shore of the Metlinsky Pond, upper Techa River region. TRDS is a code for estimating external and internal doses for members of the Extended Techa River Cohort. Several brick samples were taken from the north-western wall of the granary, facing the Metlinsky Pond. Samples were measured at different heights and at different depths into the bricks. Dating of the granary was performed by analyzing well shielded bricks. Assessment of the gamma dose-rate at the sample positions was done by thermoluminescent dosimeters and the dose-rate in front of the granary mapped with a dose-rate meter. Anthropogenic doses in bricks vary from 0.8 to 1.7 Gy and show an increase with sampling height. A similar height profile is observed for the current gamma dose-rate, which is compatible with the results of the dose-rate mapping. Implications for validating the TRDS are discussed., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Concentrations of 239 Pu, 240 Pu, and 241 Am, and atomic ratio of 240 Pu/ 239 Pu in freshly fallen snow on Mt. Zugspitze collected in 2014, 2015 and 2016 were determined by accelerator mass spectrometry (AMS). For the sub-femtogram (10 -15 g) - level of Pu and Am analysis, a chemical separation procedure combined with AMS was improved and an excellent overall efficiency of about 10 -4 was achieved. The concentration of 239 Pu ranges from 75 ± 13 ag/kg to 2823 ± 84 ag/kg, of 240 Pu from 20.6 ± 5.2 to 601 ± 21 ag/kg, and of 241 Am was found in the range of 16.7 ± 5.0-218.8 ± 8.9 ag/kg. Atomic ratios of 240 Pu/ 239 Pu for most samples are comparable to the fallout in middle Europe. One exceptional sample shows a higher Pu concentration. High airborne dust concentration, wind directions, high Cs concentrations and the activity ratio of 239+240 Pu/ 137 Cs lead to the conclusion that the sample was influenced by Pu in Saharan dust transported to Mt. Zugspitze.

The applications of hierarchical micro/nano-structures, which possess properties of two-scale roughness, have been studied in various fields. In this study, hierarchical periodic micro/nano-structures were fabricated on nitinol, an equiatomic Ni-Ti alloy, using a femtosecond laser for the surface modification of intravascular stents. By controlling the laser fluence, two types of surfaces were developed: periodic nano- and micro/nano-structures. Evaluation of water contact angles indicated that the nano-surface was hydrophilic and the micro/nano-surface was hydrophobic. Endothelial cells aligned along the nano-structures on both surfaces, whereas platelets failed to adhere to the micro/nano-surface. Decorrelation between the responses of the two cell types and the results of water contact angle analysis were a result of the pinning effect. This is the first study to show the applicability of hierarchical periodic micro/nano-structures for surface modification of nitinol., (Copyright © 2015. Published by Elsevier B.V.)

Titanium dioxide (TiO2) film is an important biomaterial used to improve the biocompatibility of titanium (Ti). We have used a film coating method with an aerosol beam and femtosecond laser irradiation to form periodic structures on biomaterials for control of the cell spreading. The control of cell spreading on biomaterials is important for the development of advanced biomaterials. In this study, nanostructures with periods of 130 and 230 nm were formed on a film using a femtosecond laser with wavelengths of 388 and 775 nm, respectively. The nanostructure period on the film was 30% of the laser wavelengths. Periods produced with wavelengths of 388 and 775 nm were calculated using a surface plasmon polariton (SPP) model and the experimental results for both wavelengths were in the range of the calculated periods, which suggests that the mechanism for the formation of the periodic nanostructures on the film with a femtosecond laser was due to the excitation of SPPs.

Plutonium (Pu) and non-natural uranium (U) originating from the Fukushima Daiichi Nuclear Power Plant (FDNPP) were identified in the atmosphere at 120 km distance from the FDNPP analyzing the ratio of number of atoms, following written as n(isotope)/n(isotope), of Pu and U. The n((240)Pu)/n((239)Pu), n((241)Pu)/n((239)Pu), n((234)U)/n((238)U), n((235)U)/n((238)U) and n((236)U)/n((238)U) in aerosol samples collected before and after the FDNPP incident were analyzed by accelerator mass spectrometry (AMS) and inductively coupled plasma mass spectrometry (ICPMS). The activity concentrations of (137)Cs and (134)Cs in the same samples were also analyzed by gamma spectrometry before the destructive analysis. Comparing the time series of analytical data on Pu and U obtained in this study with previously reported data on Pu, U, and radioactive Cs, we concluded that Pu and non-natural U from the FDNPP were transported in the atmosphere directly over a 120 km distance by aerosol and wind within a few days after the reactor hydrogen explosions. Effective dose of Pu were calculated using the data of Pu: (130 ± 21) nBq/m(3), obtained in this study. We found that the airborne Pu contributes only negligibly to the total dose at the time of the incident. However the analytical results show that the amount of Pu and non-natural U certainly increased in the environment after the incident.

Plutonium (Pu) dioxide particles were produced from certified reference material (CRM) 136 solution (CRM 136-plutonium isotopic standard, New Brunswick Laboratory, Argonne, IL, U.S.A., 1987) using an atomizer system on December 3, 2009 after chemical separation of americium (Am) on October 27, 2009. The highest density of the size distribution of the particles obtained from 312 particles on a selected impactor stage was in the range of 0.7-0.8 μm. The flattening degree of 312 particles was also estimated. The isotopic composition of Pu and uranium (U) and the amount of Am were estimated by thermal ionization mass spectrometry (TIMS), inductively coupled plasma mass spectrometry (ICPMS), and α-spectrometry. Within uncertainties the isotopic composition of the produced particles is in agreement with the expected values, which were derived from the decay correction of the Pu isotopes in the CRM 136. The elemental ratio of Am to Pu in the produced particles was determined on the 317th and 674th day after Am separation, and the residual amount of Am in the solution was estimated. The analytical results of single particles by micro-Raman-scanning electron microscopy (SEM)-energy-dispersive X-ray spectrometry (EDX) indicate that the produced particles are Pu dioxide. Our initial attempts to measure the density of two single particles gave results with a spread value accompanied by a large uncertainty.

The accuracy and precision of the determination of (238)Pu amount at the fg (mBq) level by a combination of alpha spectrometry and inductively coupled plasma mass spectrometry (ICP-MS) were studied using a standard reference material (CRM 137-Plutonium [corrected] Isotopic Standard, National Bureau of Standards, Washington, D.C., USA). The activity of (238)Pu was calculated from the amount of (239)Pu and (240)Pu obtained by isotope dilution method and ICP-MS combined with the intensity ratio of (238)Pu/(239,240)Pu obtained by alpha spectrometry without adding spike. The results show that approximately 130 fg of (238)Pu can be analyzed within an accuracy of 7% bias and with 5-12% of total uncertainty. The examined analytical procedure was applied to the quantitative analysis of (238)Pu in water samples representing Safeguards inspection samples. The combination of alpha spectrometry and ICP-MS is useful for quantitative and isotopic analysis in low-level Pu samples. Also the method leads to improving the accuracy of (238)Pu determination because efficiency calibration is not necessary for alpha spectrometry., (Copyright 2010 Elsevier Ltd. All rights reserved.)

Radionuclides released to the atmosphere during dry weather (e.g. after a nuclear accident) may contaminate vegetable foods and cause exposure to humans via the food chain. To obtain experimental data for an appropriate assessment of this exposure path, dry deposition of radionuclides to leafy vegetables was studied under homogeneous and controlled greenhouse conditions. Gaseous (131)I-tracer in predominant elemental form and particulate (134)Cs-tracer at about 1 mum diameter were used to identify susceptible vegetable species with regard to contamination by these radionuclides. The persistence was examined by washing the harvested product with water. The vegetables tested were spinach (Spinacia oleracea), butterhead lettuce (Lactuca sativa var. capitata), endive (Cichorium endivia), leaf lettuce (Lactuca sativa var. crispa), curly kale (Brassica oleracea convar. acephala) and white cabbage (Brassica oleracea convar. capitata). The variation of radionuclides deposited onto each vegetable was evaluated statistically using the non-parametric Kruskal-Wallis Test and the U-test of Mann-Whitney. Significant differences in deposited (131)I and (134)Cs activity concentration were found among the vegetable species. For (131)I, the deposition velocity to spinach normalized to the biomass of the vegetation was 0.5-0.9 cm(3) g(-1) s(-1) which was the highest among all species. The particulate (134)Cs deposition velocity of 0.09 cm(3) g(-1) s(-1) was the highest for curly kale, which has rough and structured leaves. The lowest deposition velocity was onto white cabbage: 0.02 cm(3) g(-1) s(-1) (iodine) and 0.003 cm(3) g(-1) s(-1) (caesium). For all species, the gaseous iodine deposition was significantly higher compared to the particulate caesium deposition. The deposition depends on the sensitive parameters leaf area, stomatal aperture, and plant morphology. Decontamination by washing with water was very limited for iodine but up to a factor of two for caesium.

The translocation of the radionuclides of Co, Zn, Se, Rb, Y, Tc, and Re into red and green fruits, flesh, seeds, rind, calyxes, flower, leaves, and stems via the root of the tomato plant at two different growth stages was studied by a multitracer technique. The contents (%/g) of Co, Zn, Se, and Y in the roots were the highest among the organs, but only small amounts of them were translocated into the aerial parts after 5 d cultivation with a multitracer. In contrast, Rb, Tc, and Re showed rapid translocation into the stems and leaves from the root. In the plants cultivated for 95 d with a multitracer, Zn, Se, and Rb distributed in all of the organs, Co in the organs except for flowers, and Y, Tc, and Re in the limited organs. The translocation ratio of the elements for the edible part of the plants cultivated for 95 d decreased in the order of Rb>Zn>Co approximately Se>Tc approximately Y>Re. The transfer factor of the elements for tomato fruit was determined to be in the range of 10(-5)-10(-2). The characteristic translocation behavior of the elements gives us fundamental information on the assessment of pollutant uptake by the tomato plant.

In most studies quantifying the migration parameters - apparent migration velocity and apparent dispersion coefficient - of radionuclides in the soil by model calculations, these parameters are determined for undisturbed soils. For soils disturbed by ploughing, however, no such data are available in the literature. Therefore, in the present study, the migration parameters of (137)Cs, (60)Co and (226)Ra were estimated for ploughed soils by means of a convection-dispersion model. The depth distributions of the radionuclides were determined in four lysimeters (area: 1m(2), depth of soil monolith: 0.75m) filled with artificially contaminated soils of different types in July 1990. The lysimeters were cropped with agricultural plants. The soil in each lysimeter was ploughed manually once a year until 1996 (plough depth 20cm). In July 1999, soil samples were collected from three pits in each lysimeter. The depth distributions of all radionuclides proved to be very similar in each soil pit. The spatial variability of the depth distributions of a given radionuclide within the lysimeters was about the same as their variability between the four lysimeters. Evaluation of the migration parameters revealed that the convective transport of the radionuclides was always rather small or even zero, while the dispersive transport caused a "melting" process of the initially sharp activity edge at the lower border of the Ap horizon. These results are explained by the high evapotranspiration (80-90% of the total precipitation plus irrigation) and the small amounts of seepage water during the observation period of 9 years.

The concentrations of iodine in cereal grains cultivated at 38 locations in Austria from cereal-producing sites in agricultural areas and soil-to-grain transfer factors (TF) were determined. The concentrations of iodine in cereal grains, which were analyzed by radiochemical neutron activation analysis ranged from 0.002 to 0.03 microg g(-1), the arithmetic mean and the median were 0.0061 microg g(-1) and 0.0046 microg g(-1), respectively. The TF values for cereal grains were calculated to be 0.0005-0.02 and the median was 0.0016. The TF values correlated positively with the iodine concentrations in cereal grains. However, the TF values correlated negatively with the iodine concentrations in soils as well as with the amount of clay contents of soils. The TF values were almost independent on pH values (5.4-7.6) of soils.

The uptake and translocation of trace elements in maturing soybean plants cultivated on soil were studied over 360 h under diurnal conditions after the administration of a multitracer. The contents (%/g) of Co, Se, Rb, Sr, Ru, Rh, and Cs in all the leaves and stems collected from each node increased up to around 200 h after the administration of the multitracer and then decreased with time. The contents of Zn, Tc, and Re in the leaves and Zn in the stems continuously increased up to 360 h, but Tc and Re in the stems showed maximum content. This observation suggests the translocation of these elements from old leaves to growing leaves via stems. The relationship between the content (%/g) of an element in the seeds and pods, and the cultivation time varied depending on the kind of element and on the growth steps. Mathematical analyses were applied to the behavior of the elements in the soybean. The time dependence of the uptake rate (%/g/h) and distribution of elements in each part of the plant were characteristic of the element.