Search

A scanning transmission X‐ray microscopy (STXM)‐based methodology is introduced for determining the dimensions (shell thickness, core and total diameter) of core‐shell nanoparticles, which exhibit a strong X‐ray absorption contrast and a well‐defined interface between core and shell material. A low radiation dosage during data acquisition and, therefore, less X‐ray beam‐induced damage of the sample is achieved by recording STXM images only at 2 predetermined energies of maximum absorption contrast, instead of recording a stack of images across the whole absorption edge. A model core‐shell nanoparticle, polytetrafluoroethylene (PTFE) cores with polystyrene (PS) shell, is used for demonstration. Near‐edge X‐ray absorption fine structure spectroscopy confirms the significant difference in X‐ray absorption behavior between PTFE and PS. Additionally, because of the insolubility of styrene in PTFE a well‐defined interface between particle core and shell is expected. To validate the STXM results, both the naked PTFE cores as well as the complete core‐shell nanoparticles are examined by scanning electron microscopy (SEM). The introduced STXM‐based methodology yields particle dimensions in agreement with the SEM results and provides additional information such as the position of the particle core, which cannot be extracted from a SEM micrograph. [ABSTRACT FROM AUTHOR]

Perpendicularly oriented lamellar forming block copolymers are promising candidates for the fabrication of high aspect ratio nanostructures either by means of direct pattern transfer to the underlying substrate or by sequential infiltration processes. In this work, highly ordered lamellar grains (ξ ＞ 500 nm) were produced by thermally treating the samples at high temperature (Ttarget ＞ 250 °C) in a Rapid Thermal Processing (RTP) machine. The variation of the lateral order of the nanostructures during the annealing process was investigated in detail, by decoupling the effect of the transients and of the isothermal step of the thermal treatment. Moreover, the self-assembly process was studied as a function of the annealing time and temperature in order to identify the processing parameters that maximize the lateral order avoiding, and at the same time, any degradation of the macromolecules. From this study the activation energy (Ea∼ 55 kJ mol−1) of the lamellar grain coarsening process on featureless substrates was determined. The specific process conditions that promote the self-assembly of lamellar thin films reaching a level of lateral order that is suitable for nanostructure fabrication were established. [ABSTRACT FROM AUTHOR]

Photocatalytic lithography is proved for the realization of micropatterned polymer brushes. Initiator-functionalized titanium dioxide or silicon surfaces are respectively exposed directly to near-UV light through a photomask (direct approach) or through a transparent photoactive TiO2 film (remote approach). Initiator patterns are then amplified as polymer brushes with SI-ATRP. Features down to 10 μm could be obtained using simple equipment. The process is intrinsically parallel, has high throughput and scalable to wafer size, making it powerful for microfabrication purposes. [ABSTRACT FROM AUTHOR]

Tailoring surface energies is the key factor to control the orientation of nanoscopic structures in thin block copolymer (BCP) films. In the general frame of the “grafting to” approach, this paper reports on the use of Rapid Thermal Processing (RTP) technology to perform flash grafting reactions of a hydroxyl terminated poly(styrene-r-methylmethacrylate) random copolymer to the activated silicon wafer surface. The perpendicular orientation of the cylindrical morphology of an asymmetric PS-b-PMMA block copolymer is achieved when the thickness of the random copolymer layer is higher than 6.0 nm. The grafting time to achieve this thickness reduces from about 750 s, when the RTP grafting process is performed at 230 °C, to 15 s at 310 °C. For a symmetric PS-b-PMMA block copolymer, the perpendicularly oriented lamellar morphology is obtained when the random layer thickness is higher than 3.5 nm, that is after 60 s RTP grafting time at 250 °C. In addition, TGA-GC-MS analysis indicates that a chain structural reorganization, which occurs during the RTP treatment at high temperature, affords a more stable film structure without changing its surface characteristics. In conclusion, the RTP technology allows the “grafting to” approach to be successfully integrated into the next generation lithographic processes and affords the unprecedented opportunity to study the grafting of macromolecules on time scales and in temperature ranges that have never been explored before, shedding new light on the early stages and on the dynamics of these processes. [ABSTRACT FROM AUTHOR]

Self-assembling block copolymers generate nanostructured patterns which are useful for a wide range of applications. In this paper we demonstrate the capability to control the morphology of the self-assembling process of PS-b-PMMA diblock copolymer thin films on unpatterned surfaces by means of fast thermal treatment performed in a rapid thermal processing machine. The methodology involves the use of radiation sources in order to rapidly drive the polymeric film above the glass transition temperature. Highly ordered patterns were obtained for perpendicular-oriented cylindrical and lamellar PS-b-PMMA block copolymers in less than 60 s. This approach offers the unprecedented opportunity to investigate in detail the kinetics of the block copolymer self-assembly during the early stages of the process, providing a much deeper understanding of the chemical and physical phenomena governing these processes. [ABSTRACT FROM AUTHOR]

Monodisperse silica nanospheres with sizes ranging from 250 to 725 nm were prepared and assembled into monolayers to produce regularly distributed light hot spots at the surface of oxidized silicon substrates when illuminated by a laser. Single UV nanosecond laser pulses were employed with energies above the local ablation threshold for the silicon dioxide layer, resulting in the direct formation of 2D periodically porous membranes on top of the silicon. The periodicity of the array was driven by the size of the self-assembled nanospheres. While the local field enhancement was strongly dependent on the sphere size due to Mie resonances, the size and morphology of the produced features could be maintained for all tested situations by balancing the change in local fields with the laser pulse energy. This work demonstrates the fabrication of 90 nm thick porous membranes with pore size of about 100 nm and periodicity ranging from 250 to 725 nm. [ABSTRACT FROM AUTHOR]

Two model substrates for the grafting to reaction are considered: not-deglazed silicon, whose surface is coated by a thin oxide layer with reactive silanol groups on its surface; and deglazed silicon, where the oxide layer is removed by treatment with hydrofluoric acid. The reactive polymers are hydroxy-terminated polystyrenes with molecular weights ranging from 3.9 to 13.9 kg mol⁻ 1 . The grafting to reaction is carried out at different temperatures and for different periods of time on the two different substrates. The thickness and the thermal stability of the resulting brushes are evaluated. Furthermore, the grafting of a highly dispersed system is simulated by blending two polymers with different molecular weights. Although the brush thickness growth is found to be faster on deglazed silicon, the preferential grafting of short chains occurs with equal chain selection propensity on both substrates., (© 2024 Wiley‐VCH GmbH.)

Photonic crystals are a unique tool to modify the photoluminescence of light-emitting materials. A variety of optical effects have been demonstrated by infiltrating opaline structures with photoactive media. On the other hand, the fabrication of such structures includes complex infiltration steps, that often affect the opal lattice and decrease the efficiency of light emission control. In this work, silica nanospheres were directly functionalized with rhodamine B to create an emitting shell around the dielectric core. Simple tuning of the microsphere preparation conditions allows selecting the appropriate sphere diameter and polydispersity index approaching 5%. These characteristics allow facile self-assembling of the nanospheres into three-dimensional photonic crystals whose peculiar density of photonic states at the band-gap edges induces spectral redistribution of the rhodamine B photoluminescence. The possibility to employ the new stable structure as sensor is also investigated. As a proof of principle, we report the variation of light emission obtained by exposure of the opal to vapor of chlorobenzene., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The orientation of block copolymer (BCP) features in thin films can be obtained by spin-coating a BCP solution on a substrate surface functionalized by a polymer brush layer of the appropriate random copolymer (RCP). Although this approach is well established, little work reporting the amount and distribution of residual solvent in the polymer film after the spin-coating process is available. Moreover, no information can be found on the effect of trapped solvent on the interface between the BCP film and RCP brush. In this work, systems consisting of poly(styrene)- b -poly(methyl methacrylate) thin films deposited on poly(styrene- r -methyl methacrylate) brush layers are investigated by combining neutron reflectivity (NR) experiments with simulation techniques. An increase in the amount of trapped solvent is observed by NR as the BCP film thickness increases accompanied by a significant decrease of the interpenetration length between the BCP and RCP, thus suggesting that the interpenetration between grafted chains and block copolymer chains is hampered by the solvent. Hybrid particle-field molecular dynamics simulations of the analyzed system confirm the experimental observations and demonstrate a clear correlation between the interpenetration length and the amount of trapped solvent.

In this work, we performed a systematic study on the effect of the geometry of pre-patterned templates and spin-coating conditions on the self-assembling process of colloidal nanospheres. To achieve this goal, large-scale templates, with different size and shape, were generated by direct laser-writer lithography over square millimetre areas. When deposited over patterned templates, the ordering dynamics of the self-assembled nanospheres exhibits an inverse trend with respect to that observed for the maximisation of the correlation length ξ on a flat surface. Furthermore, the self-assembly process was found to be strongly dependent on the height (H) of the template sidewalls. In particular, we observed that, when H is 0.6 times the nanospheres diameter and spinning speed 2500 rpm, the formation of a confined and well ordered monolayer is promoted. To unveil the defects generation inside the templates, a systematic assessment of the directed self-assembly quality was performed by a novel method based on Delaunay triangulation. As a result of this study, we found that, in the best deposition conditions, the self-assembly process leads to well-ordered monolayer that extended for tens of micrometres within the linear templates, where 96.2% of them is aligned with the template sidewalls.

Magnetic materials in sample preparation for shotgun phosphoproteomics offer several advantages over conventional systems, as the enrichment can be achieved directly in solution, but they still suffer from some drawbacks, due to limited stability and selectivity, which is supposed to be affected by the hydrophilicity of the polymeric supports used for cation immobilization. The paper describes the development of an improved magnetic material with increased stability, thanks to a two-step covering of the magnetic core, for the enrichment of phosphopeptides in biological samples. Four materials were prepared featuring a polymeric shell with tunable hydrophilicity, obtained by "grafting from" polymerization of glycidyl methacrylate with 0-8.3% of polyethylene glycol methacrylate (PEGMA), the latter used to modulate the hydrophilicity of the material surface. Finally, the materials were functionalized with iminodiacetic acid for Ti 4+ ion immobilization. The materials were analyzed for their composition by a combination of CHN elemental analysis and thermogravimetric analysis, also hyphenated to gas chromatography and mass spectrometric detection. Surface characteristics were evaluated by water contact angle measurements, scanning electron microscopy and energy dispersive X-ray spectrometry. These materials were applied to the enrichment of phosphopeptides from yeast protein digests. Peptides were identified by proteomics techniques using nano-high performance liquid chromatography coupled to mass spectrometry and bioinformatics. Qualitatively the peptides identified by the four systems were comparable, with 1606-1693 phosphopeptide identifications and a selectivity of 47-54% for all materials. The physico-chemical features of the identified peptides were also the same for the four materials. In particular, the grand average of hydropathy index values indicated that the enriched phosphopeptides were hydrophilic (ca. 90%), and only some co-enriched non-phosphorylated peptides were hydrophobic (21-28%), regardless of the material used for enrichment. Peptides had a pI ≤ 7, which indicated a well-known bias for acidic peptides binding, attributed to the interaction with the metal center itself. The results indicated that the enrichment of phosphopeptides and the co-enrichment of non-phosphorylated peptides is mainly driven by interactions with Ti 4+ and does not depend on the amount of PEGMA chains in the polymer shell.

Controlling the location and the distribution of hot spots is a crucial aspect in the fabrication of surface-enhanced Raman spectroscopy (SERS) substrates for bio-analytical applications. The choice of a suitable method to tailor the dimensions and the position of plasmonic nanostructures becomes fundamental to provide SERS substrates with significant signal enhancement, homogeneity and reproducibility. In the present work, we studied the influence of the long-range ordering of different flexible gold-coated Si nanowires arrays on the SERS activity. The substrates are made by nanosphere lithography and metal-assisted chemical etching. The degree of order is quantitatively evaluated through the correlation length (ξ) as a function of the nanosphere spin-coating speed. Our findings showed a linear increase of the SERS signal for increasing values of ξ, coherently with a more ordered and dense distribution of hot spots on the surface. The substrate with the largest ξ of 1100 nm showed an enhancement factor of 2.6 · 10 3 and remarkable homogeneity over square-millimetres area. The variability of the signal across the substrate was also investigated by means of a 2D chemical imaging approach and a standard methodology for its practical calculation is proposed for a coherent comparison among the data reported in literature.

We investigated the dewetting process on flat and chemically patterned surfaces of ultrathin films (thickness between 2 and 15 nm) of a cylinder forming polystyrene- block-poly(methyl methacrylate) (PS- b-PMMA) spin coated on poly(styrene- r-methyl methacrylate) random copolymers (RCPs). When the PS- b-PMMA film dewets on a 2 nm-thick RCP layer, the ordering of the hexagonally packed PMMA cylinders in the dewetted structures extends over distances far exceeding the correlation length obtained in continuous block copolymer (BCP) films. As a result, micrometer-sized circular droplets featuring defectless single grains of self-assembled PS- b-PMMA with PMMA cylinders perpendicularly oriented with respect to the substrate are generated and randomly distributed on the substrate. Additionally, alignment of the droplets along micrometric lines was achieved by performing the dewetting process on large-scale chemically patterned stripes of 2 nm thick RCP films by laser lithography. By properly adjusting the periodicity of the chemical pattern, it was possible to tune and select the geometrical characteristics of the dewetted droplets in terms of maximum thickness, contact angle and diameter while maintaining the defectless single grain perpendicular cylinder morphology of the circular droplets.

The work describes the preparation of a new magnetic phase for batch enrichment of phosphopeptides. The material exploits the advantages of magnetic solid phase extraction and couples them with the most employed approach for phosphopeptide enrichment, i.e. Ti 4+ -IMAC. In order to immobilize Ti 4+ ions on the surface of the magnetite nanoparticles, they were first covered by a silica shell and then modified to expose at the surface bromine containing groups. Glycidyl methacrylate was subsequently polymerized from these groups using the "grafting from" approach by the activator regenerated by electron transfer-atom transfer radical polymerization (ARGET-ATRP) technique. Finally, the glycidyl groups were reacted with iminodiacetic acid to functionalize the material with moieties suitable for coordination. The prepared material was extensively characterized and subsequently tested for enrichment of a bovine serum albumin mixture with casein to ascertain its potential. With positive results, the new magnetic polymeric material was further employed to set up an enrichment method on yeast protein digest based on shotgun proteomics. The sample to phase ratio was optimized and the best condition compared to a commercial TiO 2 spin column. At the end of the comparison, the new material proved better and could enrich a larger total number of phosphopeptides with increased selectivity. All these conclusions and the test performed on a real complex sample within the final shotgun application further support the applicability of the new material in phosphopeptide analysis of real matrices., (Copyright © 2017 Elsevier B.V. All rights reserved.)

An effective bottom-up technology for precisely controlling the amount of dopant atoms tethered on silicon substrates is presented. Polystyrene and poly(methyl methacrylate) polymers with narrow molecular weight distribution and end-terminated with a P-containing moiety were synthesized with different molar mass. The polymers were spin coated and subsequently end-grafted onto nondeglazed silicon substrates. P atoms were bonded to the surface during the grafting reaction, and their surface density was set by the polymer molar mass, according to the self-limiting nature of the "grafting to" reaction. Polymeric material was removed by O 2 plasma hashing without affecting the tethered P-containing moieties on the surface. Repeated cycles of polymer grafting followed by plasma hashing led to a cumulative increase, at constant steps, in the dose of P atoms grafted to the silicon surface. P injection in the silicon substrate was promoted and precisely controlled by high-temperature thermal treatments. Sheet resistance measurements demonstrated effective doping of silicon substrate.

The work describes the development of an enrichment method for the analysis of endogenous phosphopeptides in serum. Endogenous peptides can play significant biological roles, and some of them could be exploited as future biomarkers. In this context, blood is one of the most useful biofluids for screening, but a systematic investigation of the endogenous peptides, especially phosphorylated ones, is still lacking, mainly due to the lack of suitable analytical methods. Thus, in this paper, different phosphopeptide enrichment strategies were pursued, based either on metal oxide affinity chromatography (MOAC, in the form of commercial TiO 2 spin columns or magnetic graphitized carbon black-TiO 2 composite), or on immobilized metal ion affinity chromatography (IMAC, in the form of Ti 4+ -IMAC magnetic material or commercial Fe 3+ -IMAC spin columns). While MOAC strategies proved completely unsuccessful, probably due to interfering phospholipids displacing phosphopeptides, the IMAC materials performed very well. Different sample preparation strategies were tested, comprising direct dilution with the loading buffer, organic solvent precipitation, and lipid removal from the matrix, as well as the addition of phosphatase inhibitors during sample handling for maximized endogenous phosphopeptide enrichment. All data were acquired by a shotgun peptidomics approach, in which peptide samples were separated by reversed-phase nanoHPLC hyphenated with high-resolution tandem mass spectrometry. The devised method allowed the identification of 176 endogenous phosphopeptides in fresh serum added with inhibitors by the direct dilution protocol and the Ti 4+ -IMAC magnetic material enrichment, but good results could also be obtained from the commercial Fe 3+ -IMAC spin column adapted to the batch enrichment protocol.

Block copolymers (BCPs) are emerging as a cost-effective nanofabrication tool to complement conventional optical lithography because they self-assemble in highly ordered polymeric templates with well-defined sub-20-nm periodic features. In this context, cylinder-forming polystyrene-block-poly(methyl methacrylate) BCPs are revealed as an interesting material of choice because the orientation of the nanostructures with respect to the underlying substrate can be effectively controlled by a poly(styrene-random-methyl methacrylate) random copolymer (RCP) brush layer grafted to the substrate prior to BCP deposition. In this work, we investigate the self-assembly process and lateral order evolution in RCP + BCP systems consisting of cylinder-forming PS-b-PMMA (67 kg mol -1 , PS fraction of ∼70%) films with thicknesses of 30, 70, 100, and 130 nm deposited on RCP brush layers having thicknesses ranging from 2 to 20 nm. The self-assembly process is promoted by a rapid thermal processing machine operating at 250 °C for 300 s. The level of lateral order is determined by measuring the correlation length (ξ) in the self-assembled BCP films. Moreover, the amount of solvent (Φ) retained in the RCP + BCP systems is measured as a function of the thicknesses of the RCP and BCP layers, respectively. In the 30-nm-thick BCP films, an increase in Φ as a function of the thickness of the RCP brush layer significantly affects the self-assembly kinetics and the final extent of the lateral order in the BCP films. Conversely, no significant variations of ξ are observed in the 70-, 100-, and 130-nm-thick BCP films with increasing Φ.

The self-assembly (SA) of diblock copolymers (DBCs) based on phase separation into different morphologies of small and high-density features is widely investigated as a patterning and nanofabrication technique. The integration of conventional top-down approaches with the bottom-up SA of DBCs enables the possibility to address the gap in nanostructured lateral length standards for nanometrology, consequently supporting miniaturization processes in device fabrication. On this topic, we studied the pattern characteristic dimensions (i.e., center-to-center distance L 0 and diameter D) of a cylinder-forming polystyrene-b-poly( methyl methacrylate) PS-b-PMMA (54 kg mol -1 , styrene fraction 70%) DBC when confined within periodic SiO 2 trenches of different widths (W, ranging between 75 and 600 nm) and fixed length (l, 5.7 μm). The characteristic dimensions of the PMMA cylinder structure in the confined configurations were compared with those obtained on a flat surface (L 0 = 27.8 ± 0.5 nm, D = 13.0 ± 1.0 nm). The analysis of D as a function of W evolution indicates that the eccentricity of the PMMA cylinders decreases as a result of the deformation of the cylinder in the direction perpendicular to the trenches. The center-to-center distance in the direction parallel to the long side of the trenches (L 0l ) is equal to L 0 measured on the flat surface, whereas the one along the short side (L 0w ) is subjected to an appreciable variation (ΔL 0w = 5 nm) depending on W. The possibility of finely tuning L 0w maintaining constant L 0l paves the way to the realization of a DBC-based transfer standard for lateral length calibration with periods in the critical range between 20 and 50 nm wherein no commercial transfer standards are available. A prototype transfer standard with cylindrical holes was used to calibrate the linear correction factor c(Δx') xx' of an atomic force microscope for a scan length of Δx' = 1 μm. The relative standard uncertainty of the correction factor was only 1.3%, and the second-order nonlinear correction was found to be significant.

In the present paper, a reliable and rugged thermogravimetry-gas chromatography-mass spectrometry (TGA-GC-MS) method was developed to determine the composition of ultrathin films consisting of binary blends of functional polystyrene (PS) and polymethylmethacrylate (PMMA) grafted to a silicon wafer. A general methodology will be given to address the composition determination problem for binary or even multicomponent polymer brush systems using the PS/PMMA-based samples as a paradigmatic example. In this respect, several distinct tailor-made materials were developed to ensure reliable calibration and validation stages. The analytical method was tested on unknown samples to follow the composition evolution in PS/PMMA brushes during the grafting reaction. A preferential grafting of the PMMA was revealed in full agreement with its preferential interaction with the SiO2 polar surface.

Block copolymer (BCP) self-assembly is expected to complement conventional optical lithography for the fabrication of next-generation microelectronic devices. In this regard, silicon-containing BCPs with a high Flory-Huggins interaction parameter (χ) are extremely appealing because they form high-resolution nanostructures with characteristic dimensions below 10 nm. However, due to their slow self-assembly kinetics and low thermal stability, these silicon-containing high-χ BCPs are usually processed by solvent vapor annealing or in solvent-rich ambient at a low annealing temperature, significantly increasing the complexity of the facilities and of the procedures. In this work, the self-assembly of cylinder-forming polystyrene-block-poly(dimethylsiloxane-random-vinylmethylsiloxane) (PS-b-P(DMS-r-VMS)) BCP on flat substrates is promoted by means of a simple thermal treatment at high temperatures. Homogeneous PS-b-P(DMS-r-VMS) thin films covering the entire sample surface are obtained without any evidence of dewetting phenomena. The BCP arranges in a single layer of cylindrical P(DMS-r-VMS) nanostructures parallel-oriented with respect to the substrate. By properly adjusting the surface functionalization, the heating rate, the annealing temperature, and the processing time, one can obtain correlation length values larger than 1 μm in a time scale fully compatible with the stringent requirements of the microelectronic industry.

The self-assembly of block copolymer (BCP) thin films produces dense and ordered nanostructures. Their exploitation as templates for nanolithography requires the capability to control the lateral order of the nanodomains. Among a multiplicity of polymers, the widely studied all-organic polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) BCP can easily form nanodomains perpendicularly oriented with respect to the substrate, since the weakly unbalanced surface interactions are effectively neutralized by grafting to the substrate an appropriate poly(styrene-random-methyl methacrylate) P(S-r-MMA) random copolymer (RCP). This benefit along with the selective etching of the PMMA component and the chemical similarity with the standard photoresist materials deserved for PS-b-PMMA the role of BCP of choice for the technological implementation in nanolithography. This work demonstrates that the synergic effect of thermal annealing with the initial solvent naturally trapped in the basic RCP + BCP system after the deposition process can be exploited to enhance the lateral order. The solvent content embedded in the total RCP + BCP system can be tuned by changing the molecular weight and thus the thickness of the grafted RCP brush layer, without introducing external reservoirs or dedicated setup and/or systems. The appropriate supply of solvent supports a grain coarsening kinetics following a power law with a 1/3 growth exponent for standing hexagonally ordered cylinders.

Binary homopolymer blends of two hydroxyl-terminated polystyrene (PS-OH) and polymethylmethacrylate (PMMA-OH) homopolymers (Mn ∼ 16000 g mol(-1)) were grafted on SiO2 substrates by high-temperature (T > 150 °C), short-time (t < 600 s) thermal treatments. The resulting brush layer was tested to screen preferential interactions of the SiO2 substrate with the different symmetric and asymmetric PS-b-PMMA block copolymers deposited on top of the grafted molecules. By properly adjusting the blend composition and the processing parameters, an efficient surface neutralization path was identified, enabling the formation, in the block copolymer film, of homogeneous textures of lamellae or cylinders perpendicularly oriented with respect to the substrate. A critical interplay between the phase segregation of the homopolymer blends and their grafting process on the SiO2 was observed. In fact, the polar SiO2 is preferential for the PMMA-rich phase that forms a homogeneous layer on the substrate, while the PS-rich phase is located at the polymer-air interface. During the thermal treatment, phase segregation and grafting proceed simultaneously. Complete wetting of the PS rich phase on the PMMA rich phase leads to the formation of a PS/PMMA bilayer. In this case, the progressive diffusion of PS chains toward the polymer-SiO2 interface during the thermal treatment allows tuning of the brush layer composition.

Multilayer fluorescent nonporous silica nanoparticles (SNPs) with an external shell containing primary amino groups were used as delivery systems for Pt(IV) candidate antitumor prodrugs. Spherical SNPs of three different sizes (diameter around 120, 100, and 50 nm) were loaded with two different complexes, namely (OC-6-33)-diamminebis(4-carboxybutanoato)dichloridoplatinum(IV) (1) and (OC-6-44)-diammine(4-carboxybutanoato)dichloridoethanolatoplatinum(IV) (2), through the formation of amide bonds between the pendant amino groups on SNPs and the free carboxylic groups of the complexes. Complex 1 proved to cause heavy and irreversible agglomeration of SNPs; likely, the presence of two reactive carboxylic functionalities induces the formation of cross-links between the amino-decorated SNPs. On the contrary, the conjugates 2-SNP, obtained from the monofunctionalized 2, afforded aqueous nano-suspensions reasonably stable toward aggregation. These solutions showed a limited Pt release in water in the absence of any reducing agents, mainly in form of a Pt(IV) derivative generated by the hydrolysis of the Si-O-Si bond of the functionalized arms attached to silica. In the presence of ascorbic acid, the reduction Pt(IV) → Pt(II) caused the release of the active metabolite cisplatin. Conjugates 2-SNP exhibited much better antiproliferative activity on the Pt-sensitive ovarian A2780 cell line than parent cisplatin and free 2, due to their more efficient cellular uptake., (Copyright © 2015 Elsevier Inc. All rights reserved.)

Hydroxyl-terminated P(S-r-MMA) random copolymers (RCPs) with molecular weights (Mn) from 1700 to 69000 and a styrene unit fraction of approximately 61% were grafted onto a silicon oxide surface and subsequently used to study the orientation of nanodomains with respect to the substrate, in cylinder-forming PS-b-PMMA block copolymer (BCP) thin films. When the thickness (H) of the grafted layer is greater than 5-6 nm, a perpendicular orientation is always observed because of the efficient decoupling of the BCP film from the polar SiO2 surface. Conversely, if H is less than 5 nm, the critical thickness of the grafted layer, which allows the neutralization of the substrate and promotion of the perpendicular orientation of the nanodomains in the BCP film, is found to depend on the Mn of the RCP. In particular, when Mn = 1700, a 2.0 nm thick grafted layer is sufficient to promote the perpendicular orientation of the PMMA cylinders in the PS-b-PMMA BCP film. A proximity shielding mechanism of the BCP molecules from the polar substrate surface, driven by chain stretching of the grafted RCP molecules, is proposed.

Fouling and passivation are the major drawbacks for a wide applicability of electroanalytical sensors based on nanomaterials, especially in biomedical and environmental fields. The production of highly engineered devices, designed ad hoc for specific applications, is the key factor in the direction of overcoming the problem and accessing effective sensors. Here, the fine-tuning of the system, composed of a highly ordered distribution of silver nanoparticles between a bottom silica and a top titania layer, confers multifunctional properties to the device for a biomedical complex challenge: dopamine detection. The crucial importance of each component towards a robust and efficient electroanalytical system is studied. The total recovery of the electrode performance after a simple UV-A cleaning step (self-cleaning), due to the photoactive interface and the aging resistance, is deeply investigated.

Two strategies are envisioned to improve the thermal stability of the grafted layer and to allow the processing of the random copolymer/block copolymer (RCP/BCP) system at high temperature. From one side, a high-temperature thermal treatment of a commercial α-hydroxyl ω-2,2,6,6-tetramethylpiperidinyloxy functional RCP, namely, TR58, leads to the formation of a stabilized layer able to induce the perpendicular orientation of a symmetric BCP to temperatures higher than 310 °C. On the other side, an α-hydroxyl ω-Br functional RCP, namely, BrR58, with the same molar mass and composition of TR58, was prepared by activator regenerated by electron transfer atom transfer radical polymerization. The resulting brush layer can sustain the self-assembly of the symmetric BCP for processing temperatures as high as 330 °C. In both systems, the disruption of the BCP film, deposited on the grafted RCP layer, occurs because of the formation of bubbles, due to a low-temperature evolution of monomers from the RCP layer. The extent of the low-temperature monomer evolution is higher for TR58 than it is for BrR58 and starts at lower temperatures. For both copolymers, the thermal treatment offsets the low-temperature monomer evolution while still maintaining surface characteristics suitable to induce the perpendicular orientation of the BCPs, thus ultimately extending the range of processing temperatures of the BCP film and consequently speeding the self-organization process.

Polymeric materials are widely employed to build up tunable nanomasks for nano-patterning technologies. Ultrathin polymer layers are involved in this process. A Thermo Gravimetric Analysis-Mass Spectrometry (TGA-GC-MS) method was optimised, validated and successfully applied to investigate the thermal behavior of ultrathin poly(styrene-r-methylmethacrylate) random copolymer layers P(S-r-MMA) grafted to a silicon wafer surface. The interface between TGA and MS is highly versatile since many instrumental parameters (i.e. loop volumes, pulsed sampling frequencies, acquisition modalities, carrier gases, flow rates) can be easily tuned. Samples featuring substantial scale difference, i.e. bulk materials, thick films (few μm thickness), thin and ultrathin films (few nm thickness) can be analyzed without any instrumental modification or sample pretreatments. The TGA-GC-MS analysis was used to highlight subtle differences in samples featuring different thicknesses, in the 2-6 nm range, and subjected to various thermal treatments, thus indicating that this hyphenated technique could be successfully applied to the investigation of ultrathin polymer films., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Here we describe a prime-boost regimen of vaccination in Macaca fascicularis that combines priming with novel anionic microspheres designed to deliver the biologically active HIV-1 Tat protein and boosting with Tat in Alum. This regimen of immunization modulated the IgG subclass profile and elicited a balanced Th1-Th2 type of humoral and cellular responses. Remarkably, following intravenous challenge with SHIV89.6Pcy243, vaccinees significantly blunted acute viremia, as compared to control monkeys, and this control was associated with significantly lower CD4+ T cell depletion rate during the acute phase of infection and higher ability to resume the CD4+ T cell counts in the post-acute and chronic phases of infection. The long lasting control of viremia was associated with the persistence of high titers anti-Tat antibodies whose profile clearly distinguished vaccinees in controllers and viremics. Controllers, as opposed to vaccinated and viremic cynos, exhibited significantly higher pre-challenge antibody responses to peptides spanning the glutamine-rich and the RGD-integrin-binding regions of Tat. Finally, among vaccinees, titers of anti-Tat IgG1, IgG3 and IgG4 subclasses had a significant association with control of viremia in the acute and post-acute phases of infection. Altogether these findings indicate that the Tat/H1D/Alum regimen of immunization holds promise for next generation vaccines with Tat protein or other proteins for which maintenance of the native conformation and activity are critical for optimal immunogenicity. Our results also provide novel information on the role of anti-Tat responses in the prevention of HIV pathogenesis and for the design of new vaccine candidates.

This work reports experimental findings about the evolution of lateral ordering of lamellar microdomains in symmetric PS-b-PMMA thin films on featureless substrates. Phase separation and microdomain evolution are explored in a rather wide range of temperatures (190-340 °C) using a rapid thermal processing (RTP) system. The maximum processing temperature that enables the ordering of block copolymers without introducing any significant degradation of macromolecules is identified. The reported results clearly indicate that the range of accessible temperatures in the processing of these self-assembling materials is mainly limited by the thermal instability of the grafted random copolymer layer, which starts to degrade at T > 300 °C, inducing detachment of the block copolymer thin film. For T ⩽ 290 °C, clear dependence of correlation length (ξ) values on temperature is observed. The highest level of lateral order achievable in the current system in a quasi-equilibrium condition was obtained at the upper processing temperature limit after an annealing time as short as 60 s.

It is accepted so far that the formation of photonic nanojets requires the use of large dielectric spheres (several wavelengths in diameter). Here we show both numerically and experimentally that similar effects can be obtained with properly engineered sub-wavelength core-shell colloids. The design of the spheres is strongly inspired by a far-field approach for the generation of Bessel beams.

The self-assembly of asymmetric polystyrene-b-poly(methyl methacrylate) (PS-b-PMMA) block copolymer based nanoporous thin films over a broad range of molar mass (Mn) between 39 kg·mol(-1) and 205 kg·mol(-1) is obtained by means of a simple thermal treatment. In the case of standard thermal treatments, the self-assembly process of block copolymers is hindered at small Mn by thermodynamic limitations and by a large kinetic barrier at high Mn. We demonstrate that a fine tuning of the annealing parameters, performed by a Rapid Thermal Processing (RTP) machine, permits us to overcome those limitations. Cylindrical features are obtained by varying Mn and properly changing the corresponding annealing temperature, while keeping constant the annealing time (900 s), the film thickness (∼30 nm), and the PS fraction (∼0.7). The morphology, the characteristic dimensions (i.e., the pore diameter d and the pore-to-pore distance L0), and the order parameter (i.e., the lattice correlation length ξ) of the samples are analyzed by scanning electron microscopy and grazing-incidence small-angle X-ray scattering, obtaining values of d ranging between 12 and 30 nm and L0 ranging between 24 and 73 nm. The dependence of L0 as a 0.67 power law of the number of segments places these systems inside the strong segregation limit regime. The experimental results evidence the capability to tailor the self-assembly processes of block copolymers over a wide range of molecular weights by a simple thermal process, fully compatible with the stringent constraints of lithographic applications and industrial manufacturing.

The phase behaviour in thin films of an asymmetric polystyrene-b-polymethylmethacrylate (PS-b-PMMA) block copolymer with a molecular weight of 39 kg mol(-1) was assessed at a wide range of temperatures and times. Cylindrical PMMA structures featuring a diameter close to 10 nm and perpendicularly oriented with respect to the substrate were obtained at 180 °C in relatively short annealing times (t ≤ 30 min) by means of a simple thermal treatment performed in a standard rapid thermal processing machine.

We report the synthesis and structural characterization of a main-chain liquid crystal polymer constituted by a 1,2,4-oxadiazole-based bent-core repeat unit. For the first time, a liquid crystal polymer made of bent mesogenic units is demonstrated to exhibit cybotactic order in the nematic phase. Coupled with the chain-bond constraints, cybotaxis results in maximized molecular correlations that make this material of great potential in the search for the elusive biaxial and ferroelectric nematic phases. Indeed, repolarization current measurements in the nematic phase hint at a ferroelectric-like switching response (upon application of an electric field of only 1.0 V μm -1 ) that, albeit to be definitely confirmed by complementary techniques, is strongly supported by the comparative repolarization current measurements in the nematic and isotropic phases. Finally, the weak tendency of this polymer to crystallize makes it possible to supercool the cybotactic nematic phase down to room temperature, thus, paving the way for a glassy phase in which the biaxial (and possibly polar) order is frozen at room temperature.

We have previously demonstrated that intraperitoneal injections of 2'-O-methyl-phosphorothioate (2'OMePS) antisense oligoribonucleotides adsorbed onto a cationic core-shell nanoparticles (NPs), termed ZM2, provoke dystrophin restoration in the muscles of mdx mice. The aim of the present work was to evaluate the oral route as an alternative way of administration for ZM2-antisense oligoribonucleotides complexes. The biodistribution and elimination of nanoparticles were evaluated after single and multiple oral doses of IR-dye conjugated nanoparticles. Labeled nanoparticles were tracked in vivo as well as in tissue cryosections, urines and feces by Odyssey infrared imaging system, and revealed a permanence in the intestine and abdominal lymph nodes for 72 hours to 7 days before being eliminated. We subsequently tested alginate-free and alginate-encapsulated ZM2-antisense oligoribonucleotides (AON) complexes orally administered 2 and 3 times per week, respectively, in mdx mice for a total of 12 weeks. Treatment with alginate ZM2-AON induced a slight dystrophin rescue in diaphragm and intestine smooth muscles, while no dystrophin was detected in alginate-free ZM2-AON treated mice. These data encourage further experiments on oral administration testing of NP and AON complexes, possibly translatable in oligoribonucleotides-mediated molecular therapies.

We report herein the viability of a novel nanoparticles (NPs) conjugated system, namely the attachment, based on ionic and hydrophobic interactions, of different sulfonated organic salts to positively charged poly(methylmethacrylate) (PMMA)-based core-shell nanoparticles (EA0) having an high density of ammonium groups on their shells. In this context three different applications of the sulfonates@EA0 systems have been described. In detail, their ability as cytotoxic drugs and pro-drugs carriers was evaluated in vitro on NCI-H460 cell line and in vivo against human ovarian carcinoma IGROV-1 cells. Besides, 8-hydroxypyrene-1,3,6-trisulfonic acid, trisodium salt (HPTS) was chosen for NPs loading, and its internalization as bioimaging probe was evaluated on Hep G2 cells. Overall, the available data support the interest for these PMMA NPs@sulfonates systems as a promising formulation for theranostic applications. In vivo biological data strongly support the potential value of these core-shell NPs as delivery system for negatively charged drugs or biologically active molecules. Additionally, we have demonstrated the ability of these PMMA core-shell nanoparticles to act as efficient carriers of fluorophores. In principle, thanks to the high PMMA NPs external charge density, sequential and very easy post-loading of different sulfonates is achievable, thus allowing the preparation of nanocarriers either with bi-modal drug delivery behaviour or as theranostic systems., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

In Duchenne muscular dystrophy, the exon-skipping approach has obtained proof of concept in animal models, myogenic cell cultures, and following local and systemic administration in Duchenne patients. Indeed, we have previously demonstrated that low doses (7.5 mg/Kg/week) of 2'-O-methyl-phosphorothioate antisense oligoribonucleotides (AONs) adsorbed onto ZM2 nanoparticles provoke widespread dystrophin restoration 7 days after intraperitoneal treatment in mdx mice. In this study, we went on to test whether this dystrophin restoration was still measurable 90 days from the end of the same treatment. Interestingly, we found that both western blot and immunohistochemical analysis (up to 7% positive fibres) were still able to detect dystrophin protein in the skeletal muscles of ZM2-AON-treated mice at this time, and the level of exon-23 skipping could still be assessed by RT real-time PCR (up to 10% of skipping percentage). In contrast, the protein was undetectable by western blot analysis in the skeletal muscles of mdx mice treated with an identical dose of naked AON, and the percentage of dystrophin-positive fibres and exon-23 skipping were reminiscent of those of untreated mdx mice. Our data therefore demonstrate the long-term residual efficacy of this systemic low-dose treatment and confirm the protective effect nanoparticles exert on AON molecules.

Cationic block copolymers spontaneously assemble via electrostatic interactions with DNA molecules in aqueous solution giving rise to micellar structures that protect the DNA from enzymatic degradation both in vitro and in vivo. In addition, we have previously shown that they are safe, not immunogenic and greatly increased antigen-specific CTL responses following six intramuscular inoculations of a very low dose (1microg) of the vaccine DNA as compared to naked DNA. Nevertheless, they failed to elicit detectable humoral responses against the antigen. To gain further insight in the potential application of this technology, here we show that a shorter immunization protocol based on two DNA intramuscular inoculations of 1microg of DNA delivered by these copolymers and a protein boost elicits in mice broad (both humoral and cellular) and long-lasting responses and increases the antigen-specific Th1-type T cell responses and CTLs as compared to priming with naked DNA. These results indicate that cationic block copolymers represent a promising adjuvant and delivery technology for DNA vaccination strategies aimed at combating intracellular pathogens.

Anionic surfactant-free polymeric core-shell nanospheres and microspheres were previously described with an inner core constituted by poly(methylmethacrylate) (PMMA) and a highly hydrophilic outer shell composed of a hydrosoluble co-polymer (Eudragit L100-55). The outer shell is tightly linked to the core and bears carboxylic groups capable of adsorbing high amounts (antigen loading ability of up to 20%, w/w) of native basic proteins, mainly by electrostatic interactions, while preserving their activity. In the present study we have evaluated in mice the safety and immunogenicity of new vaccine formulations composed of these nano- and microspheres and the HIV-1 Tat protein. Vaccines were administered by different routes, including intramuscular, subcutaneous or intranasal and the results were compared to immunization with Tat alone or with Tat delivered with the alum adjuvant. The data demonstrate that the nano- and microspheres/Tat formulations are safe and induce robust and long-lasting cellular and humoral responses in mice after systemic and/or mucosal immunization. These delivery systems may have great potential for novel Tat protein-based vaccines against HIV-1 and hold promise for other protein-based vaccines.

For subsets of Duchenne muscular dystrophy (DMD) mutations, antisense oligoribonucleotide (AON)-mediated exon skipping has proven to be efficacious in restoring the expression of dystrophin protein. In the mdx murine model systemic delivery of AON, recognizing the splice donor of dystrophin exon 23, has shown proof of concept. Here, we show that using cationic polymethylmethacrylate (PMMA) (marked as T1) nanoparticles loaded with a low dose of 2'-O-methyl-phosphorothioate (2'OMePS) AON delivered by weekly intraperitoneal (IP) injection (0.9 mg/kg/week), could restore dystrophin expression in body-wide striated muscles. Delivery of an identical dose of naked AON did not result in detectable dystrophin expression. Transcription, western, and immunohistochemical analysis showed increased levels of dystrophin transcript and protein, and correct localization at the sarcolemma. This study shows that T1 nanoparticles have the capacity to bind and convoy AONs in body-wide muscle tissues and to reduce the dose required for dystrophin rescue. By immunofluorescence and electron microscopy studies, we highlighted the diffusion pathways of this compound. This nonviral approach may valuably improve the therapeutic usage of AONs in DMD as well as the delivery of RNA molecules with many implications in both basic research and medicine.

The use of particulate polymeric carriers holds great promise for the development of effective and affordable DNA and protein subunit vaccines. Rational development of such vaccine formulations requires a detailed understanding of their physico-chemical properties, cell-free and in vitro behaviour, in addition to particle uptake and processing mechanisms to antigen presenting cells capable of stimulating safe and effective immune responses. We here provide an overview on functional polymeric nano- and micro-particles designed for surface adsorption of proteins and DNA antigens currently under investigation for the formulation of new vaccines, including comments on their preparation method, antigen delivery strategy, cell-free and in vitro behaviour. In addition, we focus on their influence in activating antigen-specific humoral and/or cellular immune responses and on their potential for the development of new vaccines.

Purpose: This study aims at developing novel core-shell poly(methylmethacrylate) (PMMA) nanoparticles as a delivery system for protein vaccine candidates., Materials and Methods: Anionic nanoparticles consisting of a core of PMMA and a shell deriving from Eudragit L100/55 were prepared by an innovative synthetic method based on emulsion polymerization. The formed nanoparticles were characterized for size, surface charge and ability to reversibly bind two basic model proteins (Lysozyme, Trypsin) and a vaccine relevant antigen (HIV-1 Tat), by means of cell-free studies. Their in vitro toxicity and capability to preserve the biological activity of the HIV-1 Tat protein were studied in cell culture systems. Finally, their safety and immunogenicity were investigated in the mouse model., Results: The nanoparticles had smooth surface, spherical shape and uniform size distribution with a mean diameter of 220 nm. The shell is characterized by covalently bound carboxyl groups negatively charged at physiological pH, able to reversibly adsorb large amounts (up to 20% w/w) of basic proteins (Lysozyme, Trypsin and HIV-1 Tat), mainly through specific electrostatic interactions. The nanoparticles were stable, not toxic to the cells, protected the HIV-1 Tat protein from oxidation, thus preserving its biological activity and increasing its shelf-life, and efficiently delivered and released it intracellularly. In vivo experiments showed that they are well tolerated and elicit strong immune responses against the delivered antigen in mice., Conclusions: This study demonstrates that these new nanoparticles provide a versatile platform for protein surface adsorption and a promising delivery system particularly when the maintenance of the biologically active conformation is required for vaccine efficacy.

Peptide nucleic acids (PNA) are very promising antisense agents, but their in vivo application is often hampered by their low bioavailability, mainly due to their limited uptake through cellular and nuclear membranes. However, PNA chemical synthesis easily allows modification with functional structures able to improve the intrinsically low permeability and great interest is arising in finding specific and efficient delivery protocols. Polymeric core-shell microspheres with anionic functional groups on the surface were tested for their ability to reversibly bind lysine modified PNA sequences, whose antisense activity against COX-2 mRNA was already demonstrated in murine macrophages.

Novel biocompatible core-shell cationic nanoparticles, composed of an inner hard core of poly(methylmethacrylate) (PMMA) and a hydrophilic tentacular shell bearing positively charged groups and poly(ethyleneglycol) chains covalently bound to the core, were prepared by emulsion polymerization and characterized in vitro and in vivo for DNA vaccine applications. The nanoparticles reversibly adsorbed large amounts of DNA, mainly through electrostatic interactions, preserved its functional structure, efficiently delivered it intracellularly, and were not toxic in vitro or in mice. Furthermore, two intramuscular (i.m.) immunizations (4 weeks apart) with a very low dose (1 microg) of the plasmid pCV-tat delivered by these nanoparticles followed by one or two protein boosts induced significant antigen-specific humoral and cellular responses and greatly increased Th1-type T cell responses and CTLs against HIV-1 Tat.