Search

This study introduces the development of a photothermal-based microfluidic paper analytical device (PT-µPAD) integrated with near-field communication (NFC) technology and smartphone readout for enzyme-free glucose quantification in human samples. With the properties of gold nanoparticles (AuNPs) both as a nanozyme and as a photothermal substrate, there is no need for costly reagents like enzymes or a readout instrumentation for the selective and sensitive detection of glucose. In PT-µPADs, AuNPs are etched by hydrogen peroxide (H2O2) generated from glucose catalysis. Photothermal detection from the plasmonic heating of these AuNPs when illuminated by a 533nm LED light source is achieved by inserting the PT-µPAD sensor into a portable NFC platform suitable for smartphone readout. Temperature variation is directly proportional to the glucose concentration. After optimization, we acquired a linear range between 5.0 and 20.0 µmol L−1 (R2 = 0.9967) and a limit of detection (LOD) of 25.0 nmol L−1 for glucose. Additionally, while our sensor does not utilize any enzyme, it is remarkably selective to glucose with no effects from interferences. Recovery studies in various human control samples indicated a range of 99.73–102.66% with the highest RSD of 3.53%, making it highly accurate and precise. Moreover, our method is more sensitive than other methods relying on conventional µPADs for glucose sensing. By integrating the potential benefits of microfluidics, nanomaterials as nanozymes, and NFC technology for wireless readout, our sensor demonstrates great promise as an accessible, affordable, and shelf-stable device for glucose quantification. Moreover, this concept can be extended to detect other molecules of interest as a point-of-care (POC) diagnostics device. [ABSTRACT FROM AUTHOR]

This article presents the development of a distance-based thread analytical device (dTAD) integrated with an ion-imprinted polymer (IIP) for quantitative monitoring of zinc ions (Zn2+) in human urine samples. The IIP was easily chemically modified onto the thread channel using dithizone (DTZ) as a ligand to bind to Zn2+ with methacrylic acid (MAA) as a functional monomer and ethylene glycol dimethacrylate (EGDMA) as well as 2,2-azobisisobutyronitrile (AIBN) as cross-linking agents to enhance the selectivity for Zn2+ detection. The imprinted polymer was characterized using Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) spectroscopy and Scanning Electron Microscopy-Energy Dispersive X-ray Spectroscopy (SEM-EDS). Under optimization, the linear detection range was from 1.0 to 20.0 mg L-1 (R2 = 0.9992) with a limit of detection (LOD) of 1.0 mg L-1. Other potentially interfering metal ions and molecules did not interfere with this approach, leading to high selectivity. Furthermore, our technique exhibits a remarkable recovery ranging from 100.48% to 103.16%, with the highest relative standard deviation (% RSD) of 5.44% for monitoring Zn2+ in human control urine samples, indicating high accuracy and precision. Similarly, there is no significant statistical difference between the results obtained using our method and standards on zinc supplement sample labels. The proposed method offers several advantages in detecting trace Zn2+ for point-of-care (POC) medical diagnostics and environmental sample analysis, such as ease of use, instrument-free readout, and cost efficiency. Overall, our developed dTADbased IIP method holds potential for simple, affordable, and rapid detection of Zn2+ levels and can be applied to other metal ions' analysis. [ABSTRACT FROM AUTHOR]

Selectivity and enhanced response remain an issue in gaseous acetone sensing. This report demonstrates MoS2 on MXene (Ti3C2Tx) contact based on a low-cost flexible sensor for selective detection of acetone using principle component analysis and binary logistic regression. The piezotronic effect enhances the response of the sensor. The fabricated acetone sensor exhibited an excellent response of ∼5.84% at lower concentrations of acetone ranging from 5 to 30 ppm at room temperature (25 °C). The sensor's response values with (5%) and without applied external strain were calculated to be approximately 5.84 and 7.21%, respectively. This suggested an increment in the sensing performance under the applied external strain with an improved response time (448 s). A detailed study is presented in terms of comparative performance of MoS2 and MXene/MoS2 under strained and unstrained conditions. Principle component analysis and binary logistic regression techniques were used to successfully selectively detect acetone among other eight VOC (volatile organic compound) (toluene, benzene, isopropyl alcohol, formaldehyde, hydrogen sulfide, dimethyl sulfide, ethanol, and methanol) gases. A real-time breath analyzer is presented wherein an artificial breath consisting of different humidities and acetone was created, and acetone was sensed using the fabricated sensor. Finally, a proof of concept for the flexible bracelet is presented for the on-site detection of acetone levels in human breath to monitor diabetes at the point-of-care setting. This successful demonstration of the acetone sensor presents future possible avenues for healthcare, food, and industrial research. [ABSTRACT FROM AUTHOR]

This article introduces distance-based paper analytical devices (dPADs) integrated with molecularly imprinted polymers (MIPs) and carbon dots (CDs) for simultaneous quantification of cytokine biomarkers, namely C-reactive protein (CRP), tumor necrosis factor-alpha (TNF-a), and interleukin-6 (IL-6) in human biological samples for diagnosis of cytokine syndrome. Using fluorescent CDs and MIP technology, the dPAD exhibits high selectivity and sensitivity. Detection is based on fluorescence quenching of CDs achieved through the interaction of the target analytes with the MIP layer on the paper substrate. Quantitative analysis is easily accomplished by measuring the distance length of quenched fluorescence with a traditional ruler and naked eye readout enabling rapid diagnosis of cytokine syndrome and the underlying infection. Our sensor demonstrated linear ranges of 2.50-24.0 pg mL-1 (R2 = 0.9974), 0.25-3.20 pg mL-1 (R2 = 0.9985), and 1.50-16.0 pg mL-1 (R2 = 0.9966) with detection limits (LODs) of 2.50, 0.25, and 1.50 pg mL-1 for CRP, TNF-a, and IL-6, respectively. This sensor also demonstrated remarkable selectivity compared to a sensor employing a non-imprinted polymer (NIP), and precision with the highest relative standard deviation (RSD) of 5.14%. The sensor is more accessible compared to prior methods relying on expensive reagents and instruments and complex fabrication methods. Furthermore, the assay provided notable accuracy for monitoring these biomarkers in various human samples with recovery percentages ranging between 99.22% and 103.58%. By integrating microfluidic systems, nanosensing, and MIPs technology, our developed dPADs hold significant potential as a cost-effective and user-friendly analytical method for point-of-care diagnostics (POC) of cytokine-related disorders. This concept can be further extended to developing diagnostic devices for other biomarkers. [ABSTRACT FROM AUTHOR]

Topical administration of drugs and growth factors in a controlled fashion can improve the healing process during skin disorders and chronic wounds. To achieve this goal, a dermal patch is engineered that utilizes thermoresponsive drug microcarriers encapsulated within a hydrogel layer attached to a flexible heater with integrated electronic heater control circuitry. The engineered patch conformally covers the wound area and enables controlled drug delivery by electronically adjusting the temperature of the hydrogel layer. The drugs are encapsulated inside microparticles in order to control their release rates. These monodisperse thermoresponsive microparticles containing active molecules are fabricated using a microfluidic device. The system is used to release two different active molecules with molecular weights similar to drugs and growth factors and their release profiles are characterized. This platform is a key step towards engineering smart and closed loop systems for topical applications.

Biodegradable nanofibrous polymeric substrates are used to fabricate suturable, elastic, and flexible electronics and sensors. The fibrous microstructure of the substrate makes it permeable to gas and liquid and facilitates the patterning process. As a proof-of-principle, temperature and strain sensors are fabricated on this elastic substrate and tested in vitro. The proposed system can be implemented in the field of bioresorbable electronics and the emerging area of smart wound dressings.

There is a need for flexible chemical sensors for the ecological and physiological research of avian species such as house sparrows (Passer domesticus). Current methods in this field are invasive and require multiple physical interactions with the birds. Emerging research in flexible bioelectronics can enable realization of implantable devices that are mechanically compliant with the underlying tissues for continuous real-time sensing in situ. However, challenges still remain in forming an intimate flexible interface. One of the promising flexible bioelectronic platforms for tissue-embedded sensing is based on functionalizing surgical sutures or threads. Threads have three-dimensional flexibility, high surface-area-to-volume ratio, inherent wicking properties, and are easily functionalizable using reel-to-reel dip coating. Threads are ideal as they are lightweight, therefore, would not interfere with flight motion and would only require minimal interaction with the bird. However, the challenge remains in achieving a highly conductive yet flexible electrode for electrochemical sensing using materials such as gold. In this study, we address this issue through novel gold deposition directly on thread substrate followed by enzyme immobilization to realize flexible electrochemical glucose biosensors on medical-grade sutures. These sensors were calibrated and tested in a range that is wide enough to include the expected range of glucose concentration in house sparrows (0–8.55 mM). Glucose monitoring in house sparrows will provide insights into energy metabolism and regulation during stress responses. In addition, the stability, repeatability, and selectivity of the sensor were tested with final validation in a real bird. Our innovative gold-coated, thread-based flexible electrochemical glucose sensor can also be used in other small and large animals. This can also be extended to monitoring other metabolites in future. [ABSTRACT FROM AUTHOR]

There is a need to develop low-cost and compact frequency reconfigurable antennas with continuous frequency tuning capability. Existing approaches rely on dedicated electrical, mechanical, or MEMS-based approaches to reconfigure the antenna, which requires extra components and fabrication steps. In this paper, we propose a physics-based approach to realize tunable helical antennas based on a shape memory alloy (SMA). By utilizing the temperature-induced irreversible mechanical deformation of the SMA, the temperature-controlled antenna can continuously change its resonant frequency and lock the state when the desired frequency response is achieved. The height of the helical antenna changes in response to applied temperatures. No additional circuitry or mechanical modules are required for the reconfiguration of the antenna geometry. The fabricated helical antenna can shift resonant frequency between 150 and 195 MHz with a tuning sensitivity of 284 kHz/°C. [ABSTRACT FROM AUTHOR]

Devices that can morph their functions on demand provide a rich yet unexplored paradigm for the next generation of electronic devices and sensors. For example, an antenna that can morph its shape can be used to adapt communication to different wireless standards or improve wireless signal reception. We utilize temperature-sensitive shape memory alloys (SMA) to realize a shape morphing antenna (ShMoA). In the designed architecture, multiple conjoined shape memory alloy sections form the antenna. The shape morphing of this antenna is achieved through temperature control. Different temperature threshold levels are used for programming the shape. Besides its conventional use for RF applications, ShMoA can serve as a multi-level temperature sensor, analogous to thermoreceptors in an insect antenna. ShMoA essentially combines the function of temperature sensing, embedded computing for detection of threshold crossings, and radio frequency readout, all in the single construct of a shape-morphing antenna (ShMoA) without the need for any battery or peripheral electronics. The ShMoA can be employed as bio-inspired wireless temperature sensing antennae on mobile robotic flies, insects, drones and other robots. It can also be deployed as programmable antennas for multi-standard wireless communication. [ABSTRACT FROM AUTHOR]

The design and implementation of a portable fluorescence-based vapor sensing system are described. The system incorporates previously developed microsensor array technology into a compact, low-power device capable of collecting and delivering ambient vapor samples to the array while monitoring and recording the fluorescent responses of the sensors. The sensors respond differentially when exposed to a sample vapor and, when processed using a support vector machine (SVM) pattern recognition algorithm, are shown to discriminate between three classes of petroleum distillates. The system was characterized using sample vapors prepared under several different conditions in three sensing scenarios. The first scenario demonstrates the basic operational capability of the device in the field by presenting high concentration vapors to the array. The second scenario introduces the potential for a greater degree of variability in both sample vapor concentration and composition in an effort to emulate real-world sensing conditions. The third scenario uses an on-board trained pattern recognition algorithm to identify unknown vapors as their responses are collected. The device demonstrated high classification accuracy throughout the field tests and is capable of improving its classification accuracy when challenged with samples presented under variable ambient conditions by enhancing the signal-to-noise ratio of the array response.

Wearables have garnered significant attention in recent years not only as consumer electronics for entertainment, communications, and commerce but also for real-time continuous health monitoring. This has been spurred by advances in flexible sensors, transistors, energy storage, and harvesting devices to replace the traditional, bulky, and rigid electronic devices. However, engineering smart wearables that can seamlessly integrate with the human body is a daunting task. Some of the key material attributes that are challenging to meet are skin conformability, breathability, and biocompatibility while providing tunability of its mechanical, electrical, and chemical properties. Electrospinning has emerged as a versatile platform that can potentially address these challenges by fabricating nanofibers with tunable properties from a polymer base. In this article, we review advances in wearable electronic devices and systems that are developed using electrospinning. We cover various applications in multiple fields including healthcare, biomedicine, and energy. We review the ability to tune the electrical, physiochemical, and mechanical properties of the nanofibers underlying these applications and illustrate strategies that enable integration of these nanofibers with human skin. [ABSTRACT FROM AUTHOR]

A novel binary phase-shift keying (BPSK) demodulator architecture is presented. The design employs a phase frequency detector based phase-locked loop allowing for robust performance compared to prior art. Two different circuit implementations for the novel demodulator architecture are proposed. Based on theoretical analysis, the maximum data rate of the demodulator is derived to be 1/8th of the carrier frequency. For experimental validation, a prototype was implemented for a 13.56-MHz BPSK demodulator in a 0.5-[micro]m CMOS technology. The circuit occupies 1 [mm.sup.2] chip area and consumes 3-mW power without any circuit optimization and can be further improved. Bit-error rate measurements have also been presented for a 20-kbs data rate. Index Terms--Biological implant, biomedical implant, binary phase-shift keying (BPSK) demodulator, charge-pump (CP) phase-locked loop (PLL), wireless implant.

This work presents the development of a robotic hand using 3D printing technology for robotic and prosthetic applications. The 3D printed hand presented herein is very cost-effective and involves elementary fabrication steps paving the way for rapid manufacturing at low cost. Fused deposition modeling (FDM) printers using polymer composites are used to print with optimized manufacturing settings to achieve a truly low-cost solution through minimal waste, minimal material requirement while achieving the required durability. Further, the 3D printed hand is embedded with pressure and strain sensors for tactile feedback required for human-like dexterity. A piezoresistive polymer-based flexible pressure sensor and an in-house carbon-coated elastic thread-based strain sensor are employed to realize the cost-effective 3D printed hand with tactile feedback. The sensors employed need a highly linear readout circuit for the effective implementation of the tactile feedback. Owing to this, a highly linear null detection-based Wheatstone bridge is proposed for the readout. Detailed analysis and their effect on the readout's linearity are presented for the non-idealities involved in the design. A prototype is fabricated and tested to evaluate the performance of the circuit. Experimental results show that the circuit was able to reduce the nonlinearity error from 52% (in case of single-element Wheatstone bridge followed by a difference amplifier) to 0.14% for a wide resistance range from 1 kΩ to 1 MΩ. The circuit was further used as an analog readout for the sensors embedded in the 3D printed robotic hand. The complete system was finally evaluated under laboratory conditions verifying the design of the truly cost-effective and simple 3D printed robotic hand with tactile feedback. [ABSTRACT FROM AUTHOR]