Search

The high-rate convergence of copper cylindrical shells with a diameter of 48 mm and a wall thickness of 4 mm is studied at various intensities of explosive loading. Two structural mechanisms of the loss of stability of the radial deformation front are described. A diagram of structural changes reflecting the successive stages of the convergence process is presented. An interrelation is found between the number of protrusions on the shell surfaces during their corrugation at the intensity of explosive loading. It was found that high-rate longitudinal deformation during convergence has a pulsating character. It was found that the temperature rises to ~500°С in the center of the converged shell and that it can be higher than 1000°С at a high rate of spall-pore collapse. [ABSTRACT FROM AUTHOR]

The microstructure and mechanical properties of chromium–nickel austenitic stainless steel fabricated by selective laser melting using a Realizer SLM100 3D printer have been investigated in this work. The structure of the studied specimens has been formed by the complete melting of the initial powder and high-speed cooling of the melt. Cooling of the melt initially leads to the formation of δ ferrite, and then, polymorphic δ → γ transformation results in the formation of the final austenitic structure. The structure of δ ferrite which formed during melt crystallization has been found to exhibit a clear pattern of periodicity. The periodicity depends on the parameters of the melting process, such as the distance between neighboring bands formed during laser-beam traveling (intertrack distance) and the step of platform feeding (distance between layers). The polymorphic δ → γ transformation takes place by a disordered mechanism and no austenite texture forms. However, some structural heredity remains. It can be seen in the orientational relationship between some austenite grains and δ-ferrite grains. The steel fabricated by laser melting is shown to have high mechanical properties such as the yield strength, the ultimate tensile strength, and the tensile elongation at a strain rate of 10–2 s–1, which are 320, 765 MPa, and 50%, respectively. The yield strength and ultimate tensile strength of the specimens under dynamic compression by the Hopkinson–Kolskii technique at an average strain rate of 103 s–1 are 550 and 945 MPa, respectively. [ABSTRACT FROM AUTHOR]

The deformation structure in copper that forms upon the convergence of a massive cylindrical shell into a cylinder is studied in this work. The shell in the deformation zone was subjected to high-speed deformation (~104 1/s) with large values of true strain (e varied from 0.8 to 2.0). It is shown that two types of structures were formed under deformation: regions containing disperse grains with high-angle boundaries and twins and regions with deformation cells having low-angle boundaries. It is found that the twins that arose at the early stages of deformation are distorted upon further deformation: their rectilinear boundaries are bent, the orientation relationships with the matrix are violated, and high-angle boundaries of arbitrary orientation are formed. [ABSTRACT FROM AUTHOR]

The structural mechanisms of buckling and the deformation behavior of copper and steel cylindrical shells (pipes) during collapse under the action of an explosion are studied. The dependence of deformation behavior on the transverse dimensions of the shell and properties of the loaded material is described. It is established that the stability of radial collapse depends on absolute dimensions of the shell rather than relative dimensions, with the collapse of large-diameter shells occurring more stably. It is demonstrated that the collapse stability is violated due to the formation of a characteristic pattern of localized strain in the sample, consisting of homogeneous, orderly arranged structural elements whose dimension depends little on the material properties and experimental conditions. A criterion for stable radial collapse that relates the characteristic dimensions of the structural element of localized strain and the shell radius is proposed. [ABSTRACT FROM AUTHOR]

This paper describes the structural studies of hollow cylindrical shells made of D16 and Al-Mn aluminum alloys, loaded by sliding detonation. Explosive loading conditions for the complete convergence and closure of shells are established. Light optics scanning electron microscopy, and transmission electron microscopy are applied to study the structural and phase transformations in shells under shock wave loading. The relation of composition, structure, and mechanical characteristics of alloys with their behavior under the action of shock loading is shown. There are several scenarios of convergence of shells, depending on their composition and loading conditions—from complete and steady convergence to multiple spalling. [ABSTRACT FROM AUTHOR]

Metallography has been used in this study to investigate copper samples cut from cylindrical shells collapsed under shock wave loading. Spallation phenomena (either the shell is divided into concentric rings, or a wide zone with spallation cavities and cracks is formed), which occur in shells under shock wave loading are considered. High-rate deformation during inertial convergence heals pores and cracks. Traces of healing remain in the microstructure. Various cases of nonradial convergence, when a stable circular deformation front is lost, are observed. Bends appear on the thin-walled shell and the shell crumples during its converging. Periodically arranged protrusions form on the inner surface of the thick-walled shells. They subsequently join together, converging to the center of the shell. A wave-shaped relief, protrusions, dents, and corrugation on the outer surface indicate the loss of stability. [ABSTRACT FROM AUTHOR]