Search

Zinc oxide nanorods (ZnO NRs) have gained considerable research interest due to their robust energy conversion efficiency. In the present work, ZnO NRs arrays were pinpointed to probe their electromechanical response under strain conditions. ZnO seed was sputtered on different substrates by radio frequency magnetron sputtering (RF) technique at 80 W constant power and 3.49 × 10−5 mbar base pressure. The X-ray diffraction patterns exhibit hexagonal wurtzite structure with preferred c-axis crystal directions in the (002) plane. The average thickness of the seed layer for all the samples was estimated at around 214.6 nm. Surface roughness and morphologies of the nanorods have been characterized by atomic force microscopy (AFM) and field emission scanning electron microscopy (FESEM), respectively. FE-SEM images show homogeneous growth in different directions on substrates. The average diameters of ZnO NRs on silicon, glass and ITO were 51, 58 and 61 nm, respectively. The average length of all the nanorods on the substrates were measured around 1–2 μm. The local piezoresponse measurements conducted on two selected domain regions of the nanorod arrays had been characterized by piezoresponse force microscopy (PFM) to confirm the switching-piezoelectric behavior.

Zinc oxide (ZnO) nanorods have attracted considerable attention in recent years owing to their piezoelectric properties and potential applications in energy harvesting, sensing, and nanogenerators. Piezoelectric energy harvesting-based nanogenerators have emerged as promising new devices capable of converting mechanical energy into electric energy via nanoscale characterizations such as piezoresponse force microscopy (PFM). This technique was used to study the piezoresponse generated when an electric field was applied to the nanorods using a PFM probe. However, this work focuses on intensive studies that have been reported on the synthesis of ZnO nanostructures with controlled morphologies and their subsequent influence on piezoelectric nanogenerators. It is important to note that the diatomic nature of zinc oxide as a potential solid semiconductor and its electromechanical influence are the two main phenomena that drive the mechanism of any piezoelectric device. The results of our findings confirm that the performance of piezoelectric devices can be significantly improved by controlling the morphology and initial growth conditions of ZnO nanorods, particularly in terms of the magnitude of the piezoelectric coefficient factor (d33). Moreover, from this review, a proposed facile synthesis of ZnO nanorods, suitably produced to improve coupling and switchable polarization in piezoelectric devices, has been reported.

Dynamic integration of aligned nanostructures fabricated on different surfaces has prompted the needs for a novel nanoelectromechanical energy harvester. This study describes the morphologies of as-synthesized zinc oxide (ZnO) nano rod-like structures grown onto a bare sputtered substrate and patterned microcontact electrode (IDE), using a simple chemical bath deposition method (CBD). Local piezoresponse measurements were conducted to detect the piezoelectric response and polarization switching in Zinc oxide nanorods. The morphological characteristics and electromechanical response of the grown nanostructures on the printed electrode have been investigated, as a step towards enhancing the performance of piezoelectric nanogenerators. The growth characteristics and energy harvesting ability of nanostructured ZnO on interdigitated microelectrode (IDE) were reported. AFM analysis indicated that the average seed layer thickness of the ZnO film deposited before the lithographic pattern of the IDE was about ~267.5 nm. The FESEM images and XRD analysis confirmed that the ZnO nanorods possessed a hexagonal wurtzite structure having the c-axis crystal orientation preferentially in the (002) plane. FTIR spectrum confirmed the secondary vibrations of the Zn–O bonding at 669.75 cm−1 even with the adjustment in the microstructural features of ZnO. Finally, the Piezoresponse Force Microscopy (PFM) analysis confirmed the converse piezoelectric response of the grown nanorods.