Search

Municipal effluents are well-recognized as disrupting sexual differentiation and reproduction in mussels. However, the contribution to this problem made by rainfall combined with sewer overflow (increased by rain due to climate change) is not well understood. The purpose of this study was to compare the neuroendocrine effects of municipal discharge and rainfall overflow on caged endemic mussel Elliptio complanata. To this end, mussels were experimentally caged and placed for 3 months at a municipal effluent dispersion plume site and at overflow sites. Data revealed that downstream surface water contained some pharmaceuticals (caffeine and carbamazepine) and accumulated significant levels of heterotrophic bacteria, but these effects were not observed at the overflow sites. The principal effects observed at the downstream site were increased soft tissue mass (and gonad index), inflammation, and Vtg proteins in male mussels as determined by a novel immunostaining methodology. The rainfall overflow sites had no effects on these markers, but were specifically associated with reduced Vtg proteins in females, dopamine (Dop), gonad lipids, and DNA strand breaks, with increased metallothioneins. In conclusion, the observed feminizing effects of municipal effluent were not additionally observed in mussels caged at rainfall overflow sites, although the latter exhibited a different pattern of toxicity. [ABSTRACT FROM AUTHOR]

Excess rainfall events could lead to overflows and combined sewer overflows, which could threaten local mussel populations. This study sought to compare the long- term effects of combined sewer overflows and treated municipal effluents in caged Elliptio complanata mussels. Mussels were caged at 2 overflow sites, one downstream site of a major municipal effluent dispersion plume and a reference upstream site for 3 months during the summer. At the end of the exposure period, mussels were collected, analyzed for municipal contaminants (including pharmaceuticals), and effects biomarkers based on endocrine disruption (vitellogenin expression), xenobiotic detoxification (glutathione S-transferase and metallothioneins), oxidative stress/inflammation (cyclooxygenase and lipid peroxidation) and DNA damage. The data revealed that surface waters contained less pharmaceutical products than the downstream site but atrazine and its metabolite were at higher levels in overflow sites. Mussels contained elevated amounts of total heterotrophic bacteria, caffeine, acebutolol and venlafaxine at the downstream site relative to the upstream site where caffeine was higher at one of the overflow site. The levels of vitellogenin gene expression were significantly increased in both sexes of mussels caged at the downstream site only. Multivariate analysis revealed that the biomarker responses were completely separated between upstream, overflow and downstream sites. The site discrimination was based on vitellogenin, metallothioneins, DNA damage in gonad and digestive gland, gonad lipids/proteins reserves, lipid peroxidation, gonado-somatic index and condition factor. Adverse outcome pathways analysis using the power law approach revealed that most changes in the biomarkers identified by discriminant function analysis were significantly scaled to gonad energy reserves, tissue/ mussel size and loss of weight following air emersion stress. In conclusion, the toxic effects of mussels caged at overflow sites generally displayed lower responses than mussels caged downstream a treated municipal effluent suggesting that these overflows pose a lower risk than the continuous exposure to treated municipal effluent. [ABSTRACT FROM AUTHOR]

Sewage sludge sorption and desorption measurements were conducted for nine diverse contaminants of varying polarity: caffeine, sulfamethoxazole, carbamazepine, atrazine, estradiol, ethinylestradiol, diclofenac, and, for the first time desethylatrazine and norethindrone. Two types of sorption behaviour were observed. Compounds with a log octanol–water partition coefficient, log Kow, below 3 showed little or no sorption over 48 hours of shaking, while compounds with log Kow over 3 showed 30 to 90% sorption within the first few minutes. After 6 hours of shaking, mass loss through suspected biotransformation became evident for some compounds. At the pH range considered (5.7–6.7), diclofenac (pKa 4.0, log Kow 4.5) was the only compound in which pH dependent sorption could be quantified. The log sewage sludge-water distribution coefficients, log Kd, ranged from 0.2 to 2.9, and, as expected, increased with increasing log Kow of the compound and organic carbon (OC) content of the sewage sludge. A sewage sludge precipitated with alum had a substantially lower Kd values, as well as lower OC content, compared to alum-free sludge. Desorption was studied by sequentially replacing supernatant water. With each water replacement, log Kd values tended to either remain similar (following a linear isotherm) or in some cases increase (following a Freundlich-type isotherm). The length of time required to restore equilibrium increased with each rinsing step. A literature review of reported Kd values compared well with the alum-free sludge data, but not the alum-sludge data. Sewage sludge Kd across the literature appear more consistent with increasing Kow. [ABSTRACT FROM AUTHOR]

A sensitive method was developed to measure the sediment concentration of 10 wastewater micropollutants selected as potential sanitary tracers of sewage contamination and include: nonsteroidal anti-inflammatory drugs (acetaminophen - ACE and diclofenac - DIC), an anti-epileptic drug (carbamazepine - CBZ), a bblocker (atenolol - ATL), a stimulant (caffeine - CAF), a bronchodilator (theophylline - THEO), steroid hormones (progesterone - PRO and medroxyprogesterone - MedP), an artificial sweetener (aspartame - APM) and personal care products (N,N-diethyl-3-methylbenzamide - DEET). Natural sediments (combined sewer overflow and stream sediments) were extracted by ultrasonic-assisted extraction followed by solid-phase extraction. Analyses were performed using ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) using atmospheric pressure chemical ionisation in positive mode (APCI+) with a total analysis time of 4.5 min. Method detection limits were in the range of 0.01 to 15 ng g-1 dry weight (dw) for the compounds of interest, with recoveries ranging from 75% to 156%. Matrix effects were observed for some compounds, never exceeding |±18%|. All results displayed a good degree of reproducibility and repeatability, with relative standard deviations (RSD) of less than 23% for all compounds. The method was applied to an investigation of stream and combined sewer overflow sediment samples that differed in organic carbon contents and particle size distributions. Acetaminophen, caffeine and theophylline (as confounded with paraxanthine) were ubiquitously detected at 0.13-22 ng g-1 dw in stream bed sediment samples and 98-427 ng g-1 dw in combined sewer overflow sediment samples. Atenolol (80.5 ng g-1 dw) and carbamazepine (54 ng g-1 dw) were quantified only in combined sewer overflow sediment samples. The highest concentrations were recorded for DEET (14 ng g-1 dw) and progesterone (11.5 ng g-1 dw) in stream bed and combined sewer overflow sediment samples, respectively. The ratio of concentration to its limit of detection (C : LOD) in sediments for a subset of compounds were compared to their C : LOD in water. In waters with a large capacity for dilution relative to fecal sources, the C : LOD ranges in sediments were greater than in water. Thus monitoring programs for fecal source tracking using wastewater micropollutants should consider sediment sampling, particularly for waters with highly diluted sources of fecal contamination. [ABSTRACT FROM AUTHOR]

Purpose. This paper presents the results of a qualitative study on the values underlying the decision-making process of an interdisciplinary team working in a work rehabilitation facility of a Québec teaching hospital.Methods. In order to document the values underlying the decision-making process, a single case observational study was conducted. Interdisciplinary team weekly discussions on ongoing cases of 22 workers absent from work due to musculoskeletal disorders were videotaped. All discourses were transcribed and analyzed following an inductive and iterative approach. The values identified were validated by feedback from team members.Results. Ten common decision values emerged from the data: (1) team unity and credibility, (2) collaboration with stakeholders, (3) worker's internal motivation, (4) worker's adherence to the program, (5) worker's reactivation, (6) single message, (7) reassurance, (8) graded intervention, (9) pain management and (10) return to work as a therapy. The analysis of these values led to the design of a model describing interrelations between them.Conclusions. This study throws light on some mechanisms underlying the decisions made by the team and determining its action. This improves understanding of the actions taken by an interdisciplinary team in work rehabilitation and may facilitate knowledge transfer in the training of other teams. [ABSTRACT FROM AUTHOR]

The objective of this research was to investigate the recycling of ethylenediamine-tetraacetic acid (EDTA) used for the removal of trace metals from contaminated soils. We successfully used Na2S combined with Ca(OH)2 to precipitate the trace metals allowing us to recycle the EDTA. The results of batch and column leaching experiments show that both Ca-EDTA and Na-EDTA are powerful chelating agents with a similar soil remediation potential. The major advantage of Ca-EDTA is the preservation of soil organic matter. We found that Na2S was capable of separating the metals Cd, Cu and Pb from EDTA; however, the precipitation of Zn required the addition of Ca(OH)2. After reusing the reclaimed EDTA seven times, over a 14-day period, EDTA reagent losses ranged from 19.5% to 23.5%. Successive washing cycles enhanced the removal of trace metals from contaminated soils. The metal sulfide precipitates contain high concentrations of metals and could potentially be recycled. [Copyright &y& Elsevier]

There is mounting evidence that earthworms could be used as a sentinel species for soil ecotoxicity evaluation. In this aspect, phagocytosis by coelomocytes was shown to be a sensitive biomarker of exposure to xenobiotics. In this paper, we introduce a simple method for ultrasound extrusion of earthworm coelomocytes that generates a high cell yield, does not interfere with phagocytic competence, and requires a minimum of manipulations. Coelomocytes were extruded from the earthworm Eisenia fetida using this new ultrasound method and compared with ethanol and electrical extrusion. The ultrasonic extrusion showed the highest cell recovery with 3.17±0.8×106 cells per earthworm compared with 2.22±0.8×106 cells per earthworm for electrical extrusion and 1.57±0.07×106 cells per earthworm for ethanol extrusion. No significant differences in the cell viability were observed using propidium iodide and flow cytometry with viability for extrusion with ethanol of 63.8±12.7%, electrical 76.8±7.5%, and ultrasound 68.2±7.8%. To compare the potential effect of extrusion on cell quality, the cells extruded using the three methods were subjected to an 18-h in vitro exposure to methylmercury chloride (MeHgCl; CH3HgCl) with concentrations ranging from 10-9 to 10-4 M. The half-maximal effective concentration (EC50) for inhibition of phagocytosis occurred between 10–7 and 10–6 M. We found no significant differences among the extrusion methods for the phagocytic potential of the coelomocytes. This method does not harm the worms and can certainly improve collection of coelomocytes from earthworms and therefore contribute to the development of bioassays using invertebrates. [Copyright &y& Elsevier]

Cement kiln dusts are made of a complex mixture of elements. We have evaluated the potential negative impact of those dusts on the immune system of the earthworm Lumbricus terrestris. We specifically studied cell viability and phagocytic activity of coelomocytes extruded during electrical stimulation. We used two modes of exposures: in vitro, and soil incubation using OECD artificial soil media. Extruded coelomocytes were exposed 18 h in vitro to 10, 100, and 500 mg L-1 of cement kiln dust particles. The phagocytosis and the cell viability were determined using a double-laser-flow acquisition cytometry system. Using the double laser allows us to use a dichlorofluorescein diacetate (DCFDA) marker to discriminate the biological cells from the cement kiln dusts. Dead cells are marked using propidium iodide (PI). All three exposure levels showed highly significant impacts on cell viability and phagocytic activity. The in vivo soil incubation was performed using 10, 100, and 1000 mg kg-1 of cement kiln dusts incorporated into the OECD media. Here, to discriminate the biological cells from the mineral dusts we only needed to use PI. The day-to-day variability of the in vivo assay was high and although we can observe an overall reduction in cell viability at the highest concentration tested, no statistically significant effects could be observed on either cell viability or phagocytosis. [Copyright &y& Elsevier]

We measured non-specific immune function of various bivalves from marine (Cyrtodaria siliqua, Mactromeris polynyma, Mesosdesma arctatum, Mya arenaria, Mya truncata, Mytilus edulis, Serripes groenlandicus, Siliqua costata) and freshwater environments (Dreissena polymorpha and Elliptio complanata). We used flow cytometry to quantify the phagocytosis of fluorescent microspheres by hemocytes exposed in vitro to increasing levels of various metal compounds (AgNO3, CdCl2, CH3HgCl, HgCl2 and ZnCl2). In some species, low doses of mercury (organic and inorganic) and Zn suggest a hormesis-like stimulation of phagocytic activity. At higher levels of exposure, all metals tested induced a significant dose-related inhibition of hemocyte phagocytosis. The species-specific sensitivity of the assay was determined by comparing the in vitro exposure using the metal concentration inducing a 50% suppression (EC50) of the phagocytic activity. Different species expressed different levels of sensitivity. Our results show the variability of the toxic response of different species within a group of similar organisms. It also highlights the need to consider species-species differences in ecotoxicological risk assessment. [Copyright &y& Elsevier]

The potential of the trace elements Ag, As, Cd, Hg, Mo, Ni, Pb, Se, and Zn to inhibit the phagocytosis response of extruded coelomocytes of different worm species was tested. We used flow cytometry to evaluate the sensitivity of cell viability and phagocytic potential for Eisenia fetida, Lumbricus terrestris, Aporrectodea turgida, and Tubifex tubifex. Extruded cells were exposed 18 h in vitro to concentrations ranging from 10−9 to 10−4 M. Mercury was the most potent immunotoxic element, with 50% inhibition of phagocytosis occuring at concentrations between 10−7 and 10−6 M. Cadmium, Cu, Ni, and Zn also showed significant immunosuppressive effects with concentrations inducing 50% inhibition ranging from 10−5 to 10−4 M. Species-specific sensitivity varied by about a factor of 10, with no species showing a systematically higher or lower in vitro sensitivity across the range of trace elements tested. [Copyright &y& Elsevier]

Abstract Background The fate of 14 antidepressants along with their respective N-desmethyl metabolites and the anticonvulsive drug carbamazepine was examined in a primary sewage treatment plant (STP) and following advanced treatments with ozone (O3). The concentrations of each pharmaceutical compound were determined in raw sewage, effluent and sewage sludge samples by LC-MS/MS analysis. The occurrence of antidepressant by-products formed in treated effluent after ozonation was also investigated. Results Current primary treatments using physical and chemical processes removed little of the compounds (mean removal efficiency: 19%). Experimental sorption coefficients (Kd) of each studied compounds were also calculated. Sorption of venlafaxine, desmethylvenlafaxine, and carbamazepine on sludge was assumed to be negligible (log Kd ≤ 2), but higher sorption behavior can be expected for sertraline (log Kd ≥ 4). Ozonation treatment with O3 (5 mg/L) led to a satisfactory mean removal efficiency of 88% of the compounds. Screening of the final ozone-treated effluent samples by high resolution-mass spectrometry (LC-QqToFMS) did confirm the presence of related N-oxide by-products. Conclusion Effluent ozonation led to higher mean removal efficiencies than current primary treatment, and therefore represented a promising strategy for the elimination of antidepressants in urban wastewaters. However, the use of O3 produced by-products with unknown toxicity.

Abstract In vivo estimations of Pb particle bioavailability are costly and variable, because of the nature of animal assays. The most feasible alternative for increasing the number of investigations carried out on Pb particle bioavailability is in vitro testing. This testing method requires calibration using in vivo data on an adapted animal model, so that the results will be valid for childhood exposure assessment. Also, the test results must be reproducible within and between laboratories. The Relative Bioaccessibility Leaching Procedure, which is calibrated with in vivo data on soils, presents the highest degree of validation and simplicity. This method could be applied to Pb particles, including those in paint and dust, and those in drinking water systems, which although relevant, have been poorly investigated up to now for childhood exposure assessment.

Abstract Monitoring and analysis of trace contaminants such as pharmaceuticals and pesticides require the preservation of the samples before they can be quantified using the appropriate analytical methods. Our objective is to determine the sample shelf life to insure proper quantification of ultratrace contaminants. To this end, we tested the stability of a variety of pharmaceutical products including caffeine, natural steroids, and selected pesticides under refrigerated storage conditions. The analysis was performed using multi-residue methods using an on-line solid-phase extraction combined with liquid chromatography tandem mass spectrometry (SPE-LC-MS/MS) in the selected reaction monitoring mode. After 21 days of storage, no significant difference in the recoveries was observed compared to day 0 for pharmaceutical products, while for pesticides, significant losses occurred for DIA and simazine after 10 days (14% and 17% reduction respectively) and a statistically significant decrease in the recovery was noted for cyanazine (78% disappearance). However, the estrogen and progestogen steroids were unstable during storage. The disappearance rates obtained after 21 days of storage vary from 63 to 72% for the feminizing hormones. Overall, pharmaceuticals and pesticides seem to be stable for refrigerated storage for up to about 10 days (except cyanazine) and steroidal hormones can be quite sensitive to degradation and should not be stored for more than a few days.

Abstract Background A routine method for the quantification of beryllium in biological fluids is essential for the development of a chelation therapy for Chronic Beryllium Disease (CBD). We describe a procedure for the direct determination of beryllium in undigested micro quantities of human blood and serum using graphite furnace atomic absorption spectrometry. Blood and serum samples are prepared respectively by a simple 8-fold and 5-fold dilution with a Nash Reagent. Three experimental setups are compared: using no modifier, using magnesium nitrate and using palladium/citric acid as chemical modifiers. Results In serum, both modifiers did not improve the method sensitivity, the optimal pyrolysis and atomization temperatures are 1000°C and 2900°C, respectively. In blood, 6 μg of magnesium nitrate was found to improve the method sensitivity. The optimal pyrolysis and atomization temperatures were 800°C and 2800°C respectively. Conclusion In serum, the method detection limit was 2 ng l-1, the characteristic mass was 0.22 (± 0.07) pg and the accuracy ranged from 95 to 100%. In blood, the detection limit was 7 ng l-1, the characteristic mass was 0.20 (± 0.02) pg and the accuracy ranged from 99 to 101%.

Abstract Background Occupational exposure to beryllium may cause Chronic Beryllium Disease (CBD), a lung disorder initiated by an electrostatic interaction with the MHC class II human leukocyte antigen (HLA). Molecular studies have found a significant correlation between the electrostatic potential at the HLA-DP surface and disease susceptibility. CBD can therefore be treated by chelation therapy. In this work, we studied the effect of two complexing agents, nitrilotriproprionic acid (NTP) and 4,5-dihydroxy-1,3-benzene disulphonate (Tiron), on the fractionation of beryllium in human serum analysed by graphite furnace atomic absorption spectrometry (GFAAS). Results We found the average serum beryllium concentration of fourteen non-exposed individuals to be 0.53 (± 0.14) μg l-1, with 21 (± 3)% of the beryllium mass bound to the low molecular weight fraction (LMW), and 79 (± 3)% bound to the high molecular weight fraction (HMW). The addition of Tiron increased the beryllium mass in the HMW fraction, while NTP was not seen to have any influence on the fractionation of beryllium between the two fractions. NTP was, however, shown to complex 94.5% of the Be mass in the LMW fraction. The beryllium GFAAS detection limit, calculated as three times the standard deviation of 10 replicates of the lowest standard (0.05 μg L-1), was 6.0 (± 0.2) ng L-1. Conclusion The concentration of beryllium or its fractionation in human serum was not affected by sex or smoking habit. On average, three quarters of the beryllium in serum were found in the HMW fraction. Of the two ligands tested, only Tiron was effective in mobilising beryllium under physiological conditions, thus increasing the Be content in the HMW fraction.

Influenza vaccines remain the most effective public health measure for the prevention of influenza-related illnesses. The primary immunogen in inactivated influenza vaccines is hemagglutinin (HA), the receptor binding protein of influenza. The concentration of HA during vaccine production and testing is standardized according to the level of antigen as measured by Single Radial Immunodiffusion Assay (SRID). This allows vaccine potency to be controlled such that individuals receive a dose known to provoke a clinically protective immune response. As compared to alternatives, SRID has the advantage of quantifying immunologically relevant forms of HA, but it depends on timely generation of novel reagents for each new vaccine strain. In recent years, a number of alternative assays have been suggested based on either epitope recognition, receptor binding or protection from proteolysis but it is unclear how they relate to vaccine potency in clinical trials. In this report we describe the development of a lectin-based, ELISA-type assay for HA potency and find it provides similar potency estimates to SRID except in the case of a vaccine with aggregated HA and other viral proteins. In that case, SRID predicted the immunologically active HA present and ELISA techniques did not. This difference was due to tested antibodies failing to pull down or bind to the HA present unless particle aggregates were first dissociated. Furthermore, detergent treatment alone was insufficient to complete this dissociation. While others have previously demonstrated that immunocapture-based techniques can misestimate the potency of influenza vaccines depending on the individual antibodies used we demonstrate that in this case the failure was due to an inability of all antibodies to capture HA contained in the aggregated influenza vaccine. [ABSTRACT FROM AUTHOR]

Many classes of compounds are known or suspected to disrupt the endocrine system of vertebrate and invertebrate organisms. This review of the sources and fate of selected endocrine disrupting chemicals (EDCs) in the environment includes classes of compounds that are "legacy" contaminants, as well as contaminants of emerging concern. EDCs included for discussion are organochlorine compounds, halogenated aromatic hydrocarbons, brominated flame retardants, per- and polyfluoroalkyl substances, alkylphenols, phthalates, bisphenol A and analogues, pharmaceuticals, drugs of abuse and steroid hormones, personal care products, and organotins. An exhaustive survey of the fate of these contaminants in all environmental media (e.g., air, water, soil, biota, foods and beverages) is beyond the scope of this review, so the priority is to highlight the fate of EDCs in environmental media for which there is a clear link between exposure and endocrine effects in humans or in biota from other taxa. Where appropriate, linkages are also made between the fate of EDCs and regulatory limits such as environmental quality guidelines for water and sediments and total daily intake values for humans. • EDCs include "legacy" contaminants and compounds recently introduced to the market. • Several EDCs are subject to bioaccumulation and biomagnification. • Transformation products of some chemicals disrupt the endocrine system. • For some EDCs, the strongest link to effects is through exposures of humans. • For other EDCs, the strongest link to effects is through exposures of biota. [ABSTRACT FROM AUTHOR]

Endocrine disrupting chemicals (EDCs) are heterogenous in structure, chemical and physical properties, and their capacity to partition into various environmental matrixes. In many cases, these chemicals can disrupt the endocrine systems of vertebrate and invertebrate organisms when present at very low concentrations. Therefore, sensitive and varied analytical methods are required to detect these compounds in the environment. This review summarizes the analytical methods and instruments that are most used to monitor for EDCs in selected environmental matrixes. Only those matrixes for which there is a clear link between exposures and endocrine effects are included in this review. Also discussed are emerging methods for sample preparation and advanced analytical instruments that provide greater selectivity and sensitivity. • Advances in preparation of samples have focused on reducing solvent use, time and cost. • Advances in analytical instrumentation have improved sensitivity and selectivity for EDCs. • GC-MS is the method of choice for analysis of non-polar EDCs. • LC-MS/MS is the method of choice for analysis of more polar EDCs. • Non-targeted analysis are sure to expand the number of EDCs for monitoring. [ABSTRACT FROM AUTHOR]

Abstract: This paper describes a fully automated online method for solid-phase extraction coupled with liquid chromatography and tandem mass spectrometry using atmospheric pressure ionization (LC-LC-APPI-MS/MS) to simultaneously detect selected dissolved natural and synthetic hormones at concentrations as low as 5ng/L from aqueous matrices. The method shows excellent performance for the direct analysis of water and wastewater with respect to calibration curve linearity, analytic specificity, sensitivity, and carryover, as well as overall method accuracy and precision. With a runtime of 15min, a minimum of 200 samples were analyzed using a single online solid-phase extraction (SPE) column without noticeable differences in system performance. Because of the ruggedness and simplicity of this system, generic methods can be easily developed and applied for the high-throughput analysis of a wide variety of compounds without the need to resort to laborious offline SPE sample preparation. [Copyright &y& Elsevier]

Abstract: The purpose of this study was to examine the toxic effects of cadmium–telluride (CdTe) quantum dots on freshwater mussels. Elliption complanata mussels were exposed to increasing concentrations of CdTe (0, 1.6, 4 and 8mg/L) and cadmium sulfate (CdSO4, 0.5mg/L) for 24h at 15°C. After the exposure period, they were removed for assessments of immunocompetence, oxidative stress (lipid peroxidation) and genotoxicity (DNA strand breaks). Preliminary experiments revealed that CdTe dissolved in aquarium water tended to aggregate in the particulate phase (85%) while 15% of CdTe was found in the dissolved phase. Immunotoxicity was characterized by a significant decrease in the number of hemocytes capable of ingesting fluorescent beads, and hemocyte viability. The cytotoxic capacity of hemocytes to lyse mammalian K-562 cells was significantly increased, but the number of circulating hemocytes remained unchanged. Lipid peroxidation was significantly increased at a threshold concentration of 5.6mg/L in gills and significantly reduced in digestive glands at a threshold concentration <1.6mg/L CdTe. The levels of DNA strand breaks were significantly reduced in gills at <1.6mg/L CdTe. In digestive glands, a transient but marginal increase in DNA strand breaks occurred at the lowest concentration and dropped significantly at the higher concentrations. A multivariate analysis revealed that the various response patterns differed based on the concentration of CdTe, thus permitting the identification of biomarkers associated with the form (colloidal vs. molecular) of cadmium. [Copyright &y& Elsevier]

Cyanobacteria proliferate in warm, nutrient-rich environments and release toxic secondary metabolites into natural waters. Using cyanotoxin-contaminated water to irrigate crops could expose humans and biota, but the risk may be low if agricultural soils can sorb and retain cyanotoxins. In this report, we compared the sorption and desorption capacities of multi-class cyanotoxins/anabaenopeptins in soils of variable properties with a batch sorption procedure. The target compounds were anabaenopeptin-A, anabaenopeptin-B, anatoxin-a, cylindrospermopsin, and microcystins -LR, -RR, -LA, -LY, -LW, and -LF. Based on solid-liquid distribution coefficients (K d ), we classified cylindrospermopsin and microcystin-LA/-LY as "very low sorptivity", anabaenopeptin-A, -B and microcystin-LR, -LF, and -LW as "low sorptivity", and anatoxin-a and microcystin-RR as "medium sorptivity". We remain concerned about irrigating agricultural land with water contaminated with high levels of CYN and MC-LA/-LY because of their relatively low affinity and high desorption proportion in soils. The results also suggest that soil sorption can be an effective immobilization pathway for anatoxin-a and microcystin-RR. The generated data will be useful for prioritizing research on the most bioavailable cyanotoxins/anabaenopeptins that are likely to be released by the soil matrix, for environmental risk assessment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Crown Copyright © 2024. Published by Elsevier B.V. All rights reserved.)

Pure Magnéli-phase Ti 4 O 7 were prepared by means of a Plasma Torch (PT) coating method and integrated into an advanced electro-catalytic oxidation (AEO) process in order to degrade perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS) persistent pollutants present in waters. The X-ray diffraction analysis confirmed the polycrystalline nature of the pure Magnéli phase PT-Ti 4 O 7 coatings (∼100 μm thick)). The Raman spectra of the PT-Ti 4 O 7 coatings also exhibited the two characteristic peaks (at 138 and 183 cm -1 ) of the PT-Ti 4 O 7 Magnéli phase. Scanning electron microscopy revealed the nanostructured hierarchical morphology of the PT-Ti 4 O 7 thus conferring them high surface area. The PT-Ti 4 O 7 anodes are shown to achieve higher degradation efficiencies towards PFOA and PFOS in comparison with the conventional boron-doped diamond anodes. By investigating several AEO parameters (including current density, treatment time, nature of the anode material), we were able to optimise the AEO process. Thus, for both PFOA and PFOS (at an initial concentration of 500 ppb in synthetic wastewaters), degradation efficiencies as high as 96.6% and 99.7% were achieved, respectively, with a current density of 20 mA/cm 2 , a treatment time of 120 min and PT-Ti 4 O 7 mesh-type anodes. PFOA and PFOS can be degraded by both direct anodic electrochemical oxidation ( • OH radicals) and indirect electrochemical oxidation via mediators, such as persulphate acid (H 2 S 2 O 8 ) generated by sulphate anodic oxidation. The degradation of both compounds followed pseudo-first-order kinetics. The reaction rate constant (k) for PFOS removal was 4.63 × 10 -2 min -1 , whereas 2.76 × 10 -2 min -1 was recorded for PFOA removal. Subsequently, we have used the above optimal AEO operating conditions to treat real wastewater effluents (containing 17 types of PFAS molecules with a total content of 8500 ppb) and achieved a degradation rate of 39.1%-87.4% for eight of the 17 PFAS compounds. The degradation rate was found to be dependent on the chemical structure and chain length of each PFOA/PFOS component., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships, which may be considered as potential competing interests: Pôle Recherche Innovation Matériaux Avancés (PRIMA) Research and innovation project in advanced materials., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Biosolids, sewage sludge, and composts are applied to agricultural land for nutrient recovery and soil organic matter replenishment, aligning with sustainable development goals. However, they may contain per- and polyfluoroalkyl substances (PFAS) that can enter the food chain through plant bioaccumulation and leaching into the groundwater. This study analyzed 80 PFAS compounds in sewage sludge, biosolids, commercial composts, and chemical fertilizers in Quebec, Canada, using UHPLC-HRMS (Orbitrap Q-Exactive). PFAS concentrations ranged from 18 to 59 µg/kg in commercial composts, 9.8 to 213 µg/kg in pulp and paper sludge, 15 to 705 µg/kg in sewage sludge, 12 to 1310 µg/kg in biosolids, and 14.6 µg/kg on average in biosolids ash. Dominant PFAS classes included diPAPs, sulfonamides, PFCAs, and PFSAs. High diPAPs concentrations indicated widespread use in domestic, commercial, or industrial applications. This study also observed a negligible correlation between soil organic carbon and PFAS concentration in the biowastes signifying a stronger influence due to different WWTP configurations, the quality of the wastewater inputs and other medium's properties that could affect PFAS partitioning to the biowastes. Environmental assessments showed PFAS loads of up to 30 µg/kg soil from a single application, within some regulatory limits. However, repeated applications could lead to PFAS accumulation in soil, posing risks to crops and groundwater., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

A rapid on-line solid-phase extraction liquid chromatography high-resolution mass spectrometry (on-line SPE-LC-HRMS) method was developed to analyze 11 ultra-short and short-chain PFAS in surface water. Analytical optimization involved screening 7 chromatographic columns and 5 on-line SPE columns, as well as evaluating SPE loading conditions, filters, sample acidification, chromatographic mobile phases, and SPE loading mobile phases. The optimized method was then applied to 44 river water samples collected in Eastern Canada, including sites near airports with fire-training areas. Among the 11 targeted PFAS, the most frequently detected were trifluoroacetic acid (TFA, 4.6-220 ng/L), perfluorobutanoic acid (PFBA, 0.85-33 ng/L), perfluoropentanoic acid (PFPeA, 1.2-2100 ng/L), trifluoromethane sulfonic acid (TMS, 0.01-4.3 ng/L), and perfluorobutane sulfonic acid (PFBS, 0.07-450 ng/L). Levels of C3-C5 perfluoroalkyl carboxylic acids (PFCAs), C2-C4 perfluoroalkyl sulfonates (PFSAs) and n:3 polyfluoroalkyl acids (n = 2,3; n:3 acids) were significantly higher in water bodies near fire-training area sites compared with rivers in urban areas. In contrast, TFA, TMS, and 1:3 acid were not significantly elevated, likely reflecting atmospheric deposition or other diffuse sources for these compounds. Nontarget and suspect screening analysis revealed an abundance of other ultra-short and short-chain PFAS in AFFF-impacted water bodies. Perfluoroalkyl sulfonamides (FASA, C2, C3, and C5), perfluoroalkyl sulfonamide propanoic acids (FASA-PrA, C1-C2) and n:3 acids (n = 1, 4, and 5) were detected for the first time in environmental surface waters., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Background: For diabetes mellitus treatment plans, the consistency and quality of insulin drug products are crucial for patient well-being. Because biologic drugs, such as insulin, are complex heterogeneous products, the methods for drug product evaluation should be carefully validated for use. As such, these criteria are rigorously evaluated and monitored by national authorities. Consequently, reports that describe significantly lower insulin content than their label claims are a concern. This issue was raised by a past publication analyzing insulin drug products available in Canada, and, as a result, consumers and major patient organizations have requested clarification., Methods: To address these concerns, this study independently analyzed insulin drug products purchased from local Canadian pharmacies-including human insulin, insulin analogs, and porcine insulin-by compendial and noncompendial reversed-phase high-performance liquid chromatography (RP-HPLC) methods., Results: We demonstrated the importance of using methods fit for purpose when assessing insulin quality. In a preliminary screen, the expected insulin peak was seen in all products except two insulin analogs-insulin detemir and insulin degludec. Further investigation showed that this was not caused by low insulin content but insufficient solvent conditions, which demonstrated the necessity for methods to be adequately validated for product-specific use. When drug products were appropriately assessed for content using the validated type-specific compendial RP-HPLC methods for insulin quantitation, values agreed with the label claim content., Conclusions: Because insulin drug products are used daily by over a million Canadians, it is important that researchers and journals present data using methods fit for purpose and that readers evaluate such reports critically., Competing Interests: Declaration of Conflicting InterestsThe author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Per- and polyfluoroalkyl substances (PFAS) are a large chemical family, and numerous chemical species can co-exist in environmental samples, especially those impacted by aqueous film-forming foams (AFFFs). Given the limited availability of chemical standards, capturing the total amount of PFAS is challenging. Thus, the total oxidizable precursor (TOP) assay has been developed to estimate the total amount of PFAS via the oxidative conversion of precursors into perfluorocarboxylic acids (PFCAs). This study aims to enhance the robustness of the TOP assay by replacing heat activation with UV activation. We evaluated the molar yields of known precursors in water in the presence of varying levels of Suwannee River natural organic matter (SRNOM) and in two soils. The impact of UV activation was also evaluated in two soils spiked with three well-characterized AFFFs, six AFFF-impacted field soils, and nine rinse samples of AFFF-impacted stainless-steel pipe. In the presence of 100 mg/L SNROM, 6:2 fluorotelomer sulfonate (FTS), 8:2 FTS, and N-ethyl perfluorooctane sulfonamidoacetic acid (N-EtFOSAA) in deionized water had good molar recovery as PFCAs (average of 102 ± 9.8 %); at 500 mg/L SNROM, the recovery significantly dropped to an average of 51 ± 19 %. In two soils (with 4 % and 8.8 % organic matter) with individual precursor spikes, the average molar recovery was 101 ± 9.4 %, except N-EtFOSAA, which had a reduced recovery in the soil with 8.8 % organic matter (OM). UV-activated assays outperformed heat-activated ones, especially in AFFF-impacted soils and pipe extract samples, with an average of 1.4-1.5× higher PFCA recovery. In almost all test samples, UV activation resulted in a notable shift towards longer PFCA chain lengths, particularly for samples with high OM content. The study confirmed the advantages of UV activation, including a significantly shortened exposure time (1 h vs. 6 h) and reduced matrix effects from OM due to the dual functions of UV in activating persulfate and photodegrading OM., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Intense rainfall and snowmelt events may affect the safety of drinking water, as large quantities of fecal material can be discharged from storm or sewage overflows or washed from the catchment into drinking water sources. This study used β-d-glucuronidase activity (GLUC) with microbial source tracking (MST) markers: human, bovine, porcine mitochondrial DNA markers (mtDNA) and human-associated Bacteroidales HF183 and chemical source tracking (CST) markers including caffeine, carbamazepine, theophylline and acetaminophen, pathogens (Giardia, Cryptosporidium, adenovirus, rotavirus and enterovirus), water quality indicators (Escherichia coli, turbidity) and hydrometeorological data (flowrate, precipitation) to assess the vulnerability of 3 drinking water intakes (DWIs) and identify sources of fecal contamination. Water samples were collected under baseline, snow and rain events conditions in urban and agricultural catchments (Québec, Canada). Dynamics of E. coli, HF183 and WWMPs were similar during contamination events, and concentrations generally varied over 1 order of magnitude during each event. Elevated human-associated marker levels during events demonstrated that urban DWIs were impacted by recent contamination from an upstream municipal water resource recovery facility (WRRF). In the agricultural catchment, mixed fecal pollution was observed with the occurrences and increases of enteric viruses, human bovine and porcine mtDNA during peak contaminating events. Bovine mtDNA qPCR concentrations were indicative of runoff of cattle-derived fecal pollutants to the DWI from diffuse sources following rain events. This study demonstrated that the suitability of a given MST or CST indicator depend on river and catchment characteristics. The sampling strategy using continuous online GLUC activity coupled with MST and CST markers analysis was a more reliable source indicator than turbidity to identify peak events at drinking water intakes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Cyanobacteria are known to produce diverse secondary metabolites that are toxic to aquatic ecosystems and human health. However, data about the cyanotoxins occurrence and cyanobacterial diversity in Pakistan's drinking water reservoirs is scarce. In this study, we first investigated the presence of microcystin, saxitoxin, and anatoxin in 12 water bodies using an enzyme-linked immunosorbent assay (ELISA). The observed cyanotoxin values for the risk quotient (RQ) determined by ELISA indicated a potential risk for aquatic life and human health. Based on this result, we made a more in-depth investigation with a subset of water bodies (served as major public water sources) to analyze the cyanotoxins dynamics and identify potential producers. We therefore quantified the distribution of 17 cyanotoxins, including 12 microcystin congeners using a high-performance liquid chromatography-high-resolution tandem mass spectrometry/mass spectrometry (HPLC-HRMS/MS). Our results revealed for the first time the co-occurrence of multiple cyanotoxins and the presence of cylindrospermopsin in an artificial reservoir (Rawal Lake) and a semi-saline lake (Kallar Kahar). We also quantified several microcystin congeners in a river (Panjnad) with MC-LR and MC-RR being the most prevalent and abundant. To identify potential cyanotoxin producers, the composition of the cyanobacterial community was characterized by shotgun metagenomics sequencing. Despite the noticeable presence of cyanotoxins, Cyanobacteria were not abundant. Synechococcus was the most abundant cyanobacterial genus found followed by a small amount of Anabaena, Cyanobium, Microcystis, and Dolichospermum. Moreover, when we looked at the cyanotoxins genes coverage, we never found a complete microcystin mcy operon. To our knowledge, this is the first snapshot sampling of water bodies in Pakistan. Our results would not only help to understand the geographical spread of cyanotoxin in Pakistan but would also help to improve cyanotoxin risk assessment strategies by screening a variety of cyanobacterial toxins and confirming that cyanotoxin quantification is not necessarily related to producer abundance., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The prevalence of organophosphate esters (OPEs) in the global environment is increasing, which aligns with the decline in the usage of polybrominated diphenyl ethers (PBDEs). PBDEs, a category of flame retardants, were banned and classified as persistent organic pollutants (POPs) through the Stockholm Convention due to their toxic and persistent properties. Despite a lack of comprehensive understanding of their ecological and health consequences, OPEs were adopted as replacements for PBDEs. This research aims to offer a comparative assessment of PBDEs and OPEs in various domains, specifically focusing on their persistence, bioaccumulation, and toxicity (PBT) properties. This study explored physicochemical properties (such as molecular weight, octanol-water partition coefficient, octanol-air partition coefficient, Henry's law constant, and vapor pressures), environmental behaviors, global concentrations in environmental matrices (air, water, and soil), toxicities, bioaccumulation, and trophic transfer mechanisms of both groups of compounds. Based on the comparison and analysis of environmental and toxicological data, we evaluate whether OPEs represent another instance of regrettable substitution and global contamination as much as PBDEs. Our findings indicate that the physical and chemical characteristics, environmental behaviors, and global concentrations of PBDEs and OPEs, are similar and overlap in many instances. Notably, OPE concentrations have even surged by orders of several magnitude compared to PBDEs in certain pristine regions like the Arctic and Antarctic, implying long-range transport. In many instances, air and water concentrations of OPEs have been increased than PBDEs. While the bioaccumulation factors (BAFs) of PBDEs (ranging from 4.8 to 7.5) are slightly elevated compared to OPEs (-0.5 to 5.36) in aquatic environments, both groups of compounds exhibit BAF values beyond the threshold of 5000 L/kg (log10 BAF > 3.7). Similarly, the trophic magnification factors (TMFs) for PBDEs (ranging from 0.39 to 4.44) slightly surpass those for OPEs (ranging from 1.06 to 3.5) in all cases. Metabolic biotransformation rates (LogK M ) and hydrophobicity are potentially major factors deciding their trophic magnification potential. However, many compounds of PBDEs and OPEs show TMF values higher than 1, indicating biomagnification potential. Collectively, all data suggest that PBDEs and OPEs have the potential to bioaccumulate and transfer through the food chain. OPEs and PBDEs present a myriad of toxicity endpoints, with notable overlaps encompassing reproductive issues, oxidative stress, developmental defects, liver dysfunction, DNA damage, neurological toxicity, reproductive anomalies, carcinogenic effects, and behavior changes. Based on our investigation and comparative analysis, we conclude that substituting PBDEs with OPEs is regrettable based on PBT properties, underscoring the urgency for policy reforms and effective management strategies. Addressing this predicament before an exacerbation of global contamination is imperative., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Anthropogenic eutrophication remains a critical global issue, significantly impacting surface water quality. Numerous regions have implemented beneficial management practices to combat agricultural nonpoint pollution, often evaluating efficacy at the field scale, but not downstream. In this study, we conducted an extensive, 11-year (2010-2020), all-season, weekly monitoring program in a small, shallow, hypereutrophic lake and main tributary located in a cold climate, northern temperate zone, within a predominantly agricultural-forested mesoscale watershed. The monitoring took place before and after the implementation of field-scale agricultural nutrient mitigation measures in the catchment, allowing assessment of changes over time in the downstream tributary and lake. We analyzed long-term trends and temporal change points for nitrogen and phosphorus concentrations, aquatic trophic status, and nutrient stoichiometric ratios. The results revealed significant reductions in nitrogen and phosphorus concentrations, improved lake trophic status from hypereutrophic to eutrophic, and an increase in total nitrogen : total phosphorus ratios following the implementation of field-scale agricultural nutrient mitigation measures. Notably, both the lake and its main tributary exhibited significant temporal change points for these parameters. Our findings offer evidence of a relatively rapid, positive effect of the implementation of field-scale agricultural nutrient mitigation measures contributing to subsequent improvements in downstream water quality., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

A reconnaissance survey was undertaken to evaluate the occurrence and risks of 27 pharmaceuticals and metabolites in the St. Lawrence watershed. Surface water samples were collected over a five-year period (2017-2021) along a 700-km reach of the St. Lawrence River as well as 55 tributary rivers (overall N = 406 samples). Additionally, depth water samples and sediments were collected near a major wastewater effluent. Caffeine, diclofenac, and venlafaxine were the most recurrent substances (detection rates >80 %), and extremely high levels were found near a municipal effluent (e.g., ibuprofen (860 ng/L), hydroxyibuprofen (1800 ng/L) and caffeine (7200 ng/L)). Geographical mapping and statistical analyses indicated that the St. Lawrence River water mass after the Montreal City effluent was significantly more contaminated than the other water masses, and that contamination could extend up to 70 km further downstream. This phenomenon was repeatedly observed over the five years of sampling, confirming that this is not a random trend. A slight increase in contamination was also observed near Quebec City, but concentrations rapidly declined in the estuarine transition zone. Tributaries with the highest pharmaceutical levels (ΣPharmas ∼400-900 ng/L) included the Mascouche, Saint-Régis, and Bertrand rivers, all located in the densely populated Greater Montreal area. When flowrate was factored in, the top five tributaries in terms of mass load (ΣPharmas ∼200-2000 kg/year) were the Des Prairies, Saint-François, Richelieu, Ottawa, and Yamaska rivers. All samples met the Canadian Water Quality Guideline for carbamazepine. Despite the large dilution effect of the St. Lawrence River, a risk quotient approach based on freshwater PNEC values suggested that four compounds (caffeine, carbamazepine, diclofenac, and ibuprofen) could present intermediate to high risks for aquatic organisms in terms of chronic exposure., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Since aqueous film-forming foams (AFFFs) are major sources of per- and polyfluoroalkyl substances (PFAS), understanding the quantity and type of PFAS present in AFFFs is crucial for assessing environmental risk and remediation. We characterized 25 foams from Canada and Europe, including two non-AFFFs and two fluorine-free AFFFs. We used liquid chromatography coupled with high-resolution mass spectrometry (LC-HRMS) to identify novel PFAS, as well as total oxidizable precursor assays (TOP) and total organofluorine (TOF) measurements for comparison. LC-HRMS showed that the two non-AFFF foams and two PFAS-free AFFFs contained little or no PFAS, confirmed by TOF measurement using combustion ion chromatography (CIC). The PFAS-containing AFFFs, however, spanned a wide concentration range of TOF (2200-45,000 mg F/L) and contained 22 new classes of polyfluoroalkyl substances not previously reported. As a result of identifying new compounds, LC-HRMS was fully able to capture the oxidizable precursors determined by TOP assay in all tested fluorotelomer (FT) AFFFs, while unknown compounds still constituted a significant fraction (19-53 mol%) in most electrochemical fluorination (ECF) AFFFs. A fluorine mass balance was achieved by comparing the amounts of compounds identified by LC-HRMS with those detected by CIC, although LC-HRMS overestimated TOF with a recovery of 127 ± 36%., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Per- and polyfluoroalkyl substances (PFAS) encompass over 9000 chemicals utilized in various industrial and commercial applications. However, the quantification of PFAS using standard commercial analytical methods is currently limited to <50 selected compounds. To address this issue, the total oxidizable precursor (TOP) assay was developed, allowing for the oxidative conversion of previously undetectable PFAS precursors into measurable PFAS. This study investigated different sample processing methods to address post-oxidation PFAS loss identified in literature. Using PFOS as a probe molecule, up to 50 % loss of PFOS was identified during sample work-up. It was determined that the use of mass-labelled PFOS and methanolic acetic acid to chemically quench the sample post-oxidation improved PFOS recovery and allowed for correction of any remaining PFOS loss. The use of ultraviolet (UV) light was then investigated as an activator in contrast to the standard thermal activation method. A comparative evaluation was conducted to assess the recovery and conversion of perfluorooctanoic acid (PFOA), PFOS, and 6:2 fluorotelomer sulfonate (6:2 FTS) using both the heat-activated and UV-activated TOP assays. Results demonstrated that the UV-activated TOP assay achieved complete (100 %) oxidation of 6:2 FTS within 7.5 min, resulting in a total yield of generated perfluorinated carboxylic acids (PFCAs) at 108 ± 8 %. The study concluded by investigating the UV-activated TOP assay for its application on various aqueous film forming foam (AFFF) formulations and two AFFF samples drained from military aircraft rescue firefighting vehicles (ARFFVs). Analysis of these AFFF samples were supported by high resolution mass spectrometry and an expanded analytical suite, identifying several fluorotelomer precursors. The findings of this study provide compelling evidence that modifications in sample processing, work-up procedures, expansion of initial PFAS calibration standards, and UV-activation methods enhance the TOP assay, positioning it as a more reliable and quantitative analytical tool for PFAS characterization., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

Cyanobacteria proliferate in warm, nutrient-rich environments, and release cyanotoxins into natural waters. If cyanotoxin-contaminated water is used to irrigate agricultural crops, this could expose humans and other biota to cyanotoxins. However, cyanotoxins may be degraded by the diverse microbial consortia, be adsorbed or otherwise dissipate in agricultural soil. This study investigates the disappearance and transformation of 9 cyanotoxins in controlled soil microcosms after 28 d. Six soil types were exposed to factorial combinations of light, redox conditions and microbial activity that influenced the recovery of anabaenopeptin-A (AP-A), anabaenopeptin-B (AP-B), anatoxin-a (ATX-a), cylindrospermopsin (CYN), and the microcystin (MC) congeners -LR, -LA, -LY, -LW, and -LF. Cyanotoxins estimated half-lives were from hours to several months, depending on the compound and soil conditions. Cyanotoxins were eliminated via biological reactions in aerobic and anaerobic soils, although anaerobic conditions accelerated the biological dissipation of ATX-a, CYN and APs. ATX-a was sensitive to photolytic degradation, but CYN, and MCs were not reduced through photochemical transformation. MC-LR and -LA were recovered after exposure to light, redox conditions and low microbial activity, suggesting that they persisted in extractable forms, compared to other cyanotoxins in soil. Cyanotoxin degradation products were identified using high-resolution mass spectrometry, revealing their potential degradation pathways in soil., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Crown Copyright © 2023. Published by Elsevier B.V. All rights reserved.)

Methods targeting anionic per- and polyfluoroalkyl substances (PFAS) in aquatic biota are well established, but commonly overlook many PFAS classes present in aqueous film-forming foams (AFFFs). Here, we developed an analytical method for the expanded analysis of negative and positive ion mode PFAS in fish tissues. Eight variations of extraction solvents and clean-up protocols were first tested to recover 70 AFFF-derived PFAS from the fish matrix. Anionic, zwitterionic, and cationic PFAS displayed the best responses with methanol-based ultrasonication methods. The response of long-chain PFAS was improved for extracts submitted to graphite filtration alone compared with those involving solid-phase extraction. The validation included an assessment of linearity, absolute recovery, matrix effects, accuracy, intraday/interday precision, and trueness. The method was applied to a set of freshwater fish samples collected in 2020 in the immediate vicinity (creek, n = 15) and downstream (river, n = 15) of an active fire-training area at an international civilian airport in Ontario, Canada. While zwitterionic fluorotelomer betaines were major components of the subsurface AFFF source zone, they were rarely detected in fish, suggesting limited bioaccumulation potential. PFOS largely dominated the PFAS profile, with record-high concentrations in brook sticklebacks (Culaea inconstans) from the creek (16000-110,000 ng/g wet weight whole-body). These levels exceeded the Canadian Federal Environmental Quality Guidelines (FEQG) for PFOS pertaining to the Federal Fish Tissue Guideline (FFTG) for fish protection and Federal Wildlife Diet Guidelines (FWiDG) for the protection of mammalian and avian consumers of aquatic biota. Perfluorohexane sulfonamide and 6:2 fluorotelomer sulfonate were among the precursors detected at the highest levels (maximum of ∼340 ng/g and ∼1100 ng/g, respectively), likely reflecting extensive degradation and/or biotransformation of C6 precursors originally present in AFFF formulations., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Some contemporary aqueous film-forming foams (AFFFs) contain n :3 and n :1:2 fluorotelomer betaines (FTBs), which are often detected at sites impacted by AFFFs. As new chemical replacements, little is known about their environmental fate. For the first time, we investigated the biotransformation potential of 5:3 and 5:1:2 FTBs and a commercial AFFF that mainly contains n :3 and n :1:2 FTBs ( n = 5, 7, 9, 11, and 13). Although some polyfluoroalkyl compounds are precursors to perfluoroalkyl acids, 5:3 and 5:1:2 FTBs exhibited high persistence, with no significant changes even after 120 days of incubation. While the degradation of 5:3 FTB into suspected products such as fluorotelomer acids or perfluoroalkyl carboxylic acids (PFCAs) could not be conclusively confirmed, we did identify a potential biotransformation product, 5:3 fluorotelomer methylamine. Similarly, 5:1:2 FTB did not break down or produce short-chain hydrogen-substituted polyfluoroalkyl acids ( n :2 H-FTCA), hydrogen-substituted PFCA (2H-PFCA), or any other products. Incubating the AFFF in four soils with differing properties and microbial communities resulted in 0.023-0.25 mol % PFCAs by day 120. Most of the products are believed to be derived from n :2 fluorotelomers, minor components of the AFFF. Therefore, the findings of the study cannot be fully explained by the current understanding of structure-biodegradability relationships.

Limited monitoring data are available regarding the occurrence of emerging per- and polyfluoroalkyl substances (PFAS) in drinking water. Here, we validated an analytical procedure for 42 PFAS with individual detection limits of 0.001-0.082 ng/L. We also evaluated how different sample pH conditions, dechlorinating agents, and storage holding times might affect method performance. PFAS were analyzed in tap water samples collected at a large spatial scale in Quebec, Canada, covering 376 municipalities within 17 administrative regions. Target and nontarget screening revealed the presence of 31 and 23 compounds, respectively, representing 24 homolog classes. Overall, 99.3% of the tap water samples were positive for at least one PFAS, and the ƩPFAS ranged from below detection limits to 108 ng/L (95th percentile: 13 ng/L). On average, ƩPFAS was 12 times higher in tap water produced from surface water than groundwater; however, 6 of the top 10 contaminated locations were groundwater-based. Perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) had high detection rates (88% and 80%, respectively). PFOS (median: 0.15 ng/L; max: 13 ng/L) and PFOA (median: 0.27 ng/L; max: 8.1 ng/L) remained much lower than current Health Canada guidelines but higher than USEPA's interim updated health advisories. Short-chain (C3-C6) perfluoroalkyl sulfonamides were also recurrent, especially the C4 homolog (FBSA: detection rate of 50%). The 6:2 fluorotelomer sulfonyl propanoamido dimethyl ethyl sulfonate (6:2 FTSO2PrAd-DiMeEtS) was locally detected at ∼15 ng/L and recurred in 8% of our samples. Multiple PFAS that are most likely to originate from aqueous film-forming foams were also reported for the first time in tap water, including X:3 and X:1:2 fluorotelomer betaines, hydroxylated X:2 fluorotelomer sulfonates, N-trimethylammoniopropyl perfluoroalkane sulfonamides (TAmPr-FHxSA and TAmPr-FOSA), and N-sulfopropyl dimethylammoniopropyl perfluoroalkane sulfonamidopropyl sulfonates (N-SPAmP-FPeSAPS and N-SPAmP-FHxSAPS)., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests:, (Copyright © 2023 Elsevier Ltd. All rights reserved.)

The widespread distribution of contaminants of emerging concern (CECs) is a major concern due to their potential effects on human health and the environment. The insufficient sewage treatment plant infrastructures is a global problem most accentuated in less developed countries and results in the discharge of CECs to water bodies. Pacu (Piaractus mesopotamicus) is a ray-finned freshwater fish species native to the Paraná basin. It is also the most produced aquaculture fish species in Argentina since 2012. Though uninvestigated to date, the occurrence of CECs in pacu may be of high relevance due to production volumes and relevance to human exposure through fish consumption. In this study, we applied a high-resolution mass spectrometry screening method to qualitatively analyze over 100 CECs in pacu. Four extraction/cleanup methods were tested on pooled pacu fillet, including solid-phase extraction and QuEChERS. The method that produced the highest number of detections was selected for further analysis of pacu purchased in supermarkets and fish markets in Argentina between 2017 and 2020. Residues of pesticides, antibiotics, pharmaceuticals, personal care products, plasticizers, sweeteners, drug metabolites, stimulants, and illegal drugs were detected in the samples. A total of 38 CECs were detected, ranging between 24 and 35 CECs per individual sample. 100% of the samples had positive detections of caffeine, 1,7-dimethylxanthine, xanthine, benzoylecgonine, methylparaben, ethylparaben, bis(2-ethylhexyl) phthalate (DEHP), metolachlor, carbendazim, salicylic acid, 2,4-D, saccharin, cyclamate, and dodecanedioic acid. Mappings generated with correspondence analysis were used to explore similarities/dissimilarities among the detected compounds. To our knowledge this is the first report of saccharin, cyclamate, 2,4 - D, carbendazim, metolachlor, ethylparaben, propylparben, bisphenol A, DEHP, and benzotriazole in fish from Argentina, and the first report on the presence of lisinopril, metropolol acid and dodecanedioic acid in fish worldwide., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Quantification of drugs residues in wastewaters of different sources could help better understand contamination pathways, eventually leading to effluent regulation. However, limited data are available for hospital-derived wastewaters. Here, an analytical method based on automated on-line solid-phase extraction liquid chromatography tandem mass spectrometry (on-line SPE - UPLC-MS/MS) was developed for the quantification of multi-class pharmaceuticals in wastewaters. Filtrate phase and suspended solids (SPM) were both considered to evaluate the distribution of targeted analytes. Experimental design optimization involved testing different chromatographic columns, on-line SPE columns, and loading conditions for the filtrate phase, and different organic solvents and cleanup strategies for suspended solids. The selected methods were validated with suitable limits of detection, recovery, accuracy, and precision. A total of 30 hospital effluents and 6 wastewater treatment plants were sampled to evaluate concentrations in real field-collected samples. Certain pharmaceuticals were quantified at high levels such as caffeine at 670,000 ng/L in hospital wastewaters and hydroxyibuprofen at 49,000 ng/L in WWTP influents. SPM samples also had high contaminant concentrations such as ibuprofen at 31,000 ng/g in hospital effluents, fluoxetine at 529 ng/g in WWTP influents or clarithromycin at 295 ng/g in WWTP effluents. Distribution coefficients (K d ) and particle-associated fractions (Φ) indicate that pharmaceuticals tend to have better affinity to suspended solids in hospital wastewater than in municipal wastewaters. The results also bring arguments for at source treatment of these specific effluents before their introduction into urban wastewater systems., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)