Search

Aim: To determine the knowledge of final year undergraduate students attending Italian universities on the appropriate use of systemic antibiotics for endodontic infections. Methodology: Final year dental students from twenty Italian universities completed a one‐page questionnaire on antibiotic use for the treatment of endodontic infections. Data were analysed using descriptive statistics and chi‐square tests. Results: A total of three hundred and three students completed the questionnaire. The average duration of antibiotic prescription proposed by respondents was 5.48 ± 1.06 days. Amoxicillin with clavulanic acid was the first‐choice antibiotic (85.2%) followed by amoxicillin alone (13.5%), azithromycin (1.0%) and clarithromycin (0.3%), for patients not allergic to penicillin. Clarithromycin was the first‐choice drug for patients with a penicillin allergy (56.1%), followed from azithromycin (31.7%), clindamycin (11.9%) and levofloxacin (0.3%). Alveolar abscess with systemic manifestations was reported as the principal reason to prescribe antibiotics (97.7%) followed by the same condition without systemic manifestations (85.5%). For the scenario of irreversible pulpitis, 5% of students considered antibiotics necessary. Almost 52% of students would prescribe antibiotics for apical acute periodontitis; 29.7% would prescribe antibiotics for chronic apical periodontitis with sinus tract, and 13.5% indicated these drugs for chronic apical periodontitis without sinus tract. Conclusions: The results demonstrate that it is necessary to improve the knowledge of Italian students on antibiotics and indications for their use in endodontics. [ABSTRACT FROM AUTHOR]

After dental extraction, a physiological phenomenon of reabsorption of the dentoalveolar process is triggered, especially if periradicular lesions are present, which can sometimes be associated with oroantral communication in the upper posterior maxilla. To investigate a minimally invasive approach, 19 patients undergoing tooth extraction in the posterosuperior maxilla were recruited. All cases presented an oroantral communication with a diameter of 2-5 mm after tooth extraction and the alveolar process and, in some cases, with a partial defect of 1 or more bony walls. In these cases, a single surgical procedure was used to preserve the alveolar ridge using an open barrier technique with an exposed dense polytetrafluoroethylene membrane. The bottom of the extraction socket was filled with a collagen fleece. The residual bone process was reconstructed using a biomaterial based on carbonate-apatite derived from porcine cancellous bone. After 6 months, all patients were recalled and subjected to radiographic control associated with an implant-prosthetic rehabilitation plan. Data relating to the sinus health status and the average height and thickness of the regenerated bone were collected. Radiographic evaluation verified the integrity of the maxillary sinus floor with new bone formation, detecting a vertical bone dimension between 3.1 mm and 7.4 mm (average 5.13 ± 1.15 mm) and a horizontal thickness between 4.2 mm and 9.6 mm (average 6.86 ± 1.55 mm). The goal of this study was to highlight the advantage of managing an oroantral communication and, simultaneously, obtain the preservation and regeneration of the alveolar bone crest. The open barrier technique appears to be effective for the minimally invasive management of oroantral communication up to 5 mm in diameter in postextraction sites, with a good regeneration of hard and soft tissue.

After dental extraction a physiological phenomenon of reabsorption of the dentoalveolar process is triggered, especially if periradicular lesions are present, which can sometimes be associated with oro-antral communication in the upper posterior maxilla. With the aim of proposing a minimally invasive approach, 19 patients undergoing tooth extraction in the postero-superior maxilla were recruited. All cases presented an oroantral communication with a diameter of 2-5 mm after tooth extraction and the alveolar process, in some cases, with a partial defect of one or more bony walls. In these cases, a single surgical procedure was used to preserve the alveolar ridge with an open barrier technique with exposed d-PTFE membrane. The bottom of the extraction socket was filled with a collagen fleece and the residual bone process reconstructed using a bio-material based on carbonate-apatite derived from porcine cancellous bone. After 6 months all patients were recalled and subjected to radiographic control associated to an implant-prosthetic rehabilitation plan. Data relating to the sinus health status and the average height and thickness of the regenerated bone were collected. Radiographic evaluation verified the integrity of the maxillary sinus floor with new bone formation, detecting a vertical bone dimension between 3.1mm and 7.4mm (average 5.13mm ± 1.15) and a horizontal thickness between 4.2mm and 9.6mm (average 6.86mm ± 1.55). The goal of this study was to highlight the advantage of managing an oro-antral communication and, at the same time, to obtain the preservation and regeneration of the alveolar bone crest. The open barrier technique appears to be effective for the minimally invasive management of the oro-antral communication up to 5mm in diameter in post-extraction sites, with a good regeneration of hard and soft tissue., Competing Interests: Conflict of interest statement: The authors declare that they have no competing interests or relations profit with third parties whose interests may be affected by the content of the manuscript.

Oral rehabilitation after maxillary oncological resection is challenging. This case report presents the rehabilitation of a 65-year-old Caucasian male adenoid cystic carcinoma patient using a myo-cutaneous thigh flap, zygomatic implant placement, and an immediate fixed provisional prosthesis made with computer-aided technologies. The patient presented complaints of asymptomatic enlarged swelling of 5-mm on the right hard hemi-palate. There was an oro-antral communication deriving from a previous local excision. Preoperative radiographs showed the involvement of the right maxilla, maxillary sinus, and nose with a suspect involvement of the maxillary division of the trigeminal nerve. Treatment was planned through a fully digital workflow. A partial maxillectomy was performed endoscopically, and maxilla was reconstructed using an anterolateral thigh free flap. Two zygomatic implants were inserted simultaneously. A provisional fix full-arch prosthesis was manufactured preoperatively through a fully digital workflow and was placed in the operating room. Following post-operative radiotherapy, the patient received a final hybrid prosthesis. During the follow-up period of two years, the patient reported good function, aesthetics, and significant enhancement in quality of life. According to the results of this case, the protocol represented can be a promising alternative for oral cancer patients with large defects, and can lead to an improved quality of life.

Background: The aim of the present retrospective study was to assess peri-implant soft tissue health for implants restored with different prosthetic emergence profile angles., Methods: Patients were treated with implants supporting fixed dentures and were followed for 3 years. Buccal emergence angle (EA) measured at 3 years of follow-up visits (t1) were calculated for two different groups: Group 1 (153 implants) for restorations with angle between implant axis and prosthetic emergence angle from ≥30°, and Group 2 (67 implants) for those with angle ≤30°, respectively. Image J software was used for the measurements. Moreover, peri-implant soft tissue parameters such as pocket probing depth (PPD), plaque index (PI) and gingival index (GI) were assessed, respectively., Results: A total of 57 patients were included in the analysis and a total of 220 implants were examined. Mean (±SD) EA in Groups 1 and 2 was 46.4 ± 12.2 and 24.5 ± 4.7 degrees, respectively. After 3 years of follow-up, a PPD difference of 0.062 mm (CI 95% -0.041 mm; 0.164 mm) was calculated between the two groups and was not statistically significant ( p = 0.238). Similar results were found for PI (OR = 0.78, CI 95% 0.31; 1.98, p = 0.599). Furthermore, GI scores of 2 and 3 were found for nine implants (5.9%) in Group 1, and for five implants in Group 2 (7.5%). A non-significant difference ( p = 0.76) was found., Conclusions: Peri-implant soft-tissue health does not seem to be influenced by EA itself, when a proper emergence profile is provided for implant-supported reconstructions in anterior areas.

Background: Ex vivo and in vitro studies have demonstrated the effectiveness of some irrigation protocols in reducing the bacterial load in the root canal system. However, standardized protocols have not yet been defined for the real clinical context due to many irrigation procedures available., Objective: To evaluate the clinical endodontic protocols and limitations of irrigating solutions in the disinfection of the root canal system in patients with apical periodontitis., Methods: PubMed, Scopus, Embase, Web of Science, and Cochrane databases were searched for randomized controlled trials (RCT) published until January 2021. Hand searching was also performed. Studies focused on evaluating the effectiveness of irrigating solutions and/or irrigation activation methods in reducing the bacterial load in the root canal system were considered. The Cochrane risk-of-bias tool for randomized trials (RoB2) was used to assess the quality of the studies., Results: Four hundred and twenty eight published articles were identified. After removing the duplicate studies and analyzing full texts, seven RCTs were selected. Two studies compared pure NaOCl with some combination of NaOCl with HEDP and MTAD. Two studies analyzed the antibacterial efficacy of NaOCl and chlorhexidine (CHX). Three studies compared conventional needle irrigation with different irrigation activation methods (PUI, XP-endo finisher, F-file activator, EndoVac activator). The review attained a satisfactory methodology. The main results of each included study were described., Discussion: Activation methods provide significantly higher biofilm reduction than conventional needle irrigation methods. Combinations of NaOCl with different chelating agents were ineffective in terms of antimicrobial, but it could potentially increase the risk of irrigant extrusion. However, the irrigating protocols were not carefully detailed, especially those regarding the irrigants application time or total volume. The existing literature lacks high-quality studies. The level of evidence is moderate., Conclusions: The available data is too heterogeneous to compare and identify the superiority of specific valuable irrigation protocols in each clinical context. Application time, volume, and activation methods should be standardized to determine the optimal irrigating procedures to reduce the bacterial load and ensure higher predictability of the endodontic treatment., Systematic Review Registration: (https://www.crd.york.ac.uk/prospero/display_record.php?RecordID=218555), PROSPERO registration: CRD42020218555., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Tonini, Salvadori, Audino, Sauro, Garo and Salgarello.)

Dental anxiety (DA) is defined as unreasonable apprehension toward dental procedures. About 4-20% of the worldwide adult population presents DA, with peaks of 30% in the younger population. Managing patients with dental anxiety and fear with a reliable and valid instrument is necessary to understand the multidimensional dimensions of dental fear. This work aimed to validate the Index of Dental Anxiety and Fear (IDAF-4C+) into Italian. Two hundred and eighty dental students attending an Italian university were enrolled. The IDAF-4C+ was translated by experts and a native English translator, blinded to the original version. The Modified Dental Anxiety Scale (MDAS) was used to assess the validity of IDAF-4C+. Spearman correlation coefficients and Exploratory Factorial Analysis (EFA) were used. Reliability was evaluated by Cronbach's alpha. The reliability of the Italian version of IDAF-4C+ was good (Cronbach's alpha = 0.88). Correlation between IDAF-4C+ and MDAS ranged between 0.42 to 0.68. From EFA, one factor explained 58.76% of the common variance. Women showed a higher level of dental fear. The Italian IDAF-4C+ is a valid and reliable tool to assess DA in any clinical context. This instrument allows for a proper understanding and management of DA, and therefore a better patient oral health-related quality of life and compliance with the dentist's instructions.

Background: After the first lockdown, Italian dentists resumed their practice while handling several challenges. Reducing contagion risk by complying with the stringent measures recommended by the Italian Ministry of Health for dental activity while also balancing patient needs was a difficult task. This work aims to understand the procedures that were adopted in the second phase of the COVID-19 pandemic (5 May-30 September 2020) and the dentists' expectations and concerns about returning to normalcy., Methods: A national survey with 38 questions was conducted from November 2020 to January 2021 and comparisons were performed among the five main Italian geographic areas., Results: Located mainly in northwest Italy, 1028 dentists were included in the survey. About 83% of the Italian dentists fully restarted their activities after the lockdown. The resumption was significantly marked in North Italy and the Center than in the South ( p < 0.01). Over 80% adopted the recommended precautional guidelines, modifying them according to the specific dental treatment executed. Fifty percent of dentists were confident in returning to normalcy after the COVID-19 crisis. Many precautions adopted during the pandemic will be continued, especially in South Italy and the Islands ( p < 0.01)., Conclusions: Italian dentists reported excellent autonomous organizational skills and the maintaining of high-quality precautions during the reopening phase.

Introduction: On March 9, 2020, the Italian government imposed a nationwide lockdown to contain the spread of coronavirus disease 2019. Oral health services were limited to only essential services. Nonurgent treatments were postponed. This study described the management of urgent dental care in northern Italy during the lockdown, with a particular focus on the province of Brescia., Methods: A cross-sectional survey was administered to Italian dentists at the end of the lockdown (May 3, 2020). A total of 1407 dentists answered the survey., Results: A total of 1205 dentists were included. Most of the respondents were dental owners (73.6%). About 79.7% of the dentists handled urgencies during the lockdown. The number of urgencies treated weekly was lower than that generally handled before the coronavirus disease 2019 outbreak (P < .001). Many dentists (81.2%) provided telephone consultations to evaluate symptoms. Pulpitis and abscesses were the most common urgencies (44.7% and 40.2%, respectively). Furthermore, 95% of dentists wore masks, protective eyewear, and surgical gloves while delivering nonpostponable treatments. The filtering facepiece 2 mask was used by 41.8% and 41.7% of owners and dental assistants, respectively. Financial concerns, risk of contagion, and personal protective equipment supply were indicated as the main current concerns., Conclusions: Our survey showed that Italian dentists took protective measures during the lockdown, thus minimizing the risk of contagion for dental health care personnel and patients. Many precautionary guidelines are now available, but a high uncertainty persists about dental health delivery during the pandemic., (Copyright © 2020 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

Early marginal bone loss (MBL) is a non-infective remodeling process of variable entity occurring within the first year after implant placement. It has a multifactorial etiology, being influenced by both surgical and prosthetic factors. Their impact remains a matter of debate, and controversial information is available, particularly regarding implants placed subcrestally. The present multicenter prospective clinical study aimed to correlate marginal bone loss around platform-switched implants with conical connection inserted subcrestally to general and local factors. Fifty-five patients were enrolled according to strict inclusion/exclusion criteria by four clinical centers. Single or multiple implants (AnyRidge, MegaGen, South Korea) were inserted in the posterior mandible with a one-stage protocol. Impressions were taken after two months of healing (T1), screwed metal-ceramic restorations were delivered three months after implant insertion (T2), and patients were recalled after six months (T3) and twelve months (T4) of prosthetic loading. Periapical radiographs were acquired at each time point. Bone levels were measured at each time point on both mesial and distal aspects of implants. Linear mixed models were fitted to the data to identify predictors associated with MBL. Fifty patients (25 male, 25 female; mean age 58.0 ± 12.8) with a total of 83 implants were included in the final analysis. The mean subcrestal position of the implant shoulder at baseline was 1.24 ± 0.57 mm, while at T4, it was 0.46 ± 0.59 mm under the bone level. Early marginal bone remodeling was significantly influenced by implant insertion depth and factors related to biological width establishment (vertical mucosal thickness, healing, and prosthetic abutment height). Deep implant insertion, thin peri-implant mucosa, and short abutments were associated with greater marginal bone loss up to six months after prosthetic loading. Peri-implant bone levels tended to stabilize after this time, and no further marginal bone resorption was recorded at twelve months after implant loading.

Objective: This in vitro study evaluated at baseline (T0) and over time (T12 months), the effect of a multi-mode universal adhesive compared with two experimental formulations blended with different concentrations of benzalkonium chloride (BAC), on bond strength and endogenous enzymatic activity., Methods and Materials: Specimens were assigned to the following groups according to the adhesive protocol: G1) All-Bond Universal (ABU) self-etch (SE); G2) ABU + 0.5% BAC SE; G3) ABU + 1% methacrylate BAC SE; G4) ABU etch-and-rinse (E&R); G5) ABU + 0.5% BAC E&R; G6) ABU + 1% methacrylate BAC E&R. Gelatin zymography was performed on dentin powder obtained from eight human third molars. Endogenous enzymatic activity within the hybrid layer was examined using in situ zymography after 24 h (T0) or 1-year storage in artificial saliva (T12). Forty intact molars were prepared for microtensile bond strength test at T0 and T12. Results were statistically analyzed with three-way ANOVA (α = 0.05)., Results: Gelatin zymography assay and in situ zymography quantification analyses indicated that all the BAC-containing formulations decreased matrix metalloproteinase expression. However, in situ zymography showed a general trend of enzymatic activity increase after aging. Microtensile bond-strength testing showed decrease in bond strength over time in all the tested groups; performances of the 1% methacrylate BAC experimental groups were worse than the control., Conclusions: BAC-containing adhesives reduce endogenous enzymatic activity both immediately and over time. However, independently from the adhesive employed, increase in the gelatinolytic activity over time and decrease in bond strength was found (especially in the BAC + 1% methacrylate groups), probably due to impaired polymerization properties., Clinical Significance: Adhesives containing protease inhibitors are practical and efficient tools in clinical practice for enhancement of the longevity of dental restorations. However, extensive investigation of the mechanical and adhesive properties of the material is necessary prior to their clinical use., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Objectives: The aim of this study was to investigate, by the means of microtensile bond strength (μTBS) test, gelatin and in situ zymography, the influence of 0.2% CHX contained within a commercially available adhesive on long-term bond strength and endogenous enzymatic activity., Methods: Non-carious teeth were subjected to μTBS test (N = 15 for each group) and stressed until failure. μTBS was evaluated immediately and after 12-month storage in artificial saliva at 37 °C. Dentin powder was obtained from additional teeth (N = 7) for gelatin zymography, while for in situ zymography, 3 teeth for each group were selected. Gelatin and in situ zymography were performed in dentin powder and slices of dentin, respectively, to assess the ability of 0.2% CHX blended within the adhesive to inhibit endogenous enzymatic activity., Results: μTBS bond strength was higher in the CHX-containing groups, immediately as well as after aging. The bond strength significantly decreased after 12-month aging. The activation of endogenous MMPs was found to be related to the presence of CHX within the adhesive system and the bonding strategy employed., Conclusions: Under this perspective 0.2% CHX blended within Peak Universal adhesive monomer seems to increase immediate bond strength, to preserve bond strength over time and to efficiently inhibit endogenous enzymatic activity in dentin. Hence, blending the CHX in low concentrations within the adhesive could be recommended as a feasible technique in every-day clinical practice., Clinical Significance: Using CHX-containing adhesives could be recommended due to several benefits: it seems to increase the longevity of the hybrid layer; the inhibitor appears to be efficiently delivered to the dentinal substrate and to inhibit endogenous enzymatic activity, without prolonging chair time., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Radiotherapy alone or in combination with chemotherapy and/or surgery is a well-known radical treatment for head and neck cancer patients. Nevertheless acute side effects (such as moist desquamation, skin erythema, loss of taste, mucositis etc.) and in particular late toxicities (osteoradionecrosis, xerostomia, trismus, radiation caries etc.) are often debilitating and underestimated. A multidisciplinary group of head and neck cancer specialists from Italy met in Milan with the aim of reaching a consensus on a clinical definition and management of these toxicities. The Delphi Appropriateness method was used for this consensus and external experts evaluated the conclusions. The paper contains 20 clusters of statements about the clinical definition and management of stomatological issues that reached consensus, and offers a review of the literature about these topics. The review was split into two parts: the first part dealt with dental pathologies and osteo-radionecrosis (10 clusters of statements), whereas this second part deals with trismus and xerostomia (10 clusters of statements)., (Copyright © 2016. Published by Elsevier Ireland Ltd.)

Background: The purpose of this study was to compare the results obtained using the rapid palate expander (RPE) and the quad-helix (QH) in the treatment of cleft lip and palate (CLP) patients in mixed dentition., Methods: In this retrospective clinical trial 28 CLP patients in mixed dentition were enrolled and divided into a group RPE, consisting of 11 patients, and a group QH, consisting of 17 patients. Plaster models before and after treatment were scanned and measurements were made using the software Ortho Analyzer. Measurements, obtained with a digital gauge on plaster models, were regarded as the gold standard and compared with those on digital models. Measurement error was assessed using the Dahlberg formula and the reliability and accuracy of the measurements were evaluated by the interclass coefficient (ICC). The unpaired t-test was used to compare the group RPE with the group QH., Results: Measurement error found with Dahlberg's method was 0.36. ICC values indicated a strong repeatability of the evaluator's measurements on digital models and an almost perfect repeatability on plaster models, with a value of 0.79 and 0.93, respectively. The ICC for the accuracy of the measurements on digital models was equal to 0.74, indicating a strong agreement with measurements realized on plaster models. Patients in the QH group presented a gain of the anterior palatal diameter significantly greater than those in the RPE group., Conclusions: The use in mixed dentition of the quad-helix allows obtaining a greater gain of the anterior palatal diameter and a greater symmetry of the dental arch.

Objective: To evaluate the influence of an app-based approach in a protocol for domestic oral hygiene maintenance in a group of adolescent patients wearing fixed multibracket appliances., Materials and Methods: Eighty adolescent patients scheduled to start an orthodontic multibracket treatment were randomly divided into two groups of 40. Plaque index (PI), gingival index (GI), white spots (WS), and caries presence were recorded in all patients, and they were instructed regarding domestic oral hygiene maintenance on the day of braces application (t0) and every 3 months (t1, t2, t3, t4) during the first year of treatment. Study group (SG) patients were enrolled in a WhatsApp chat room-based competition and instructed to share monthly with the other participants two self-photographs (selfies) showing their oral hygiene status., Results: SG patient participation in the chat room was regular and active throughout the observation period. At t2, t3, and t4, SG patients had significantly lower values of both PI and GI and a lower incidence of new WS and caries, compared with the control group., Conclusion: Integration of new "social" technologies in a standard oral hygiene motivation protocol is effective in improving compliance of adolescent patients and in improving their oral health status during orthodontic multibracket treatment.

Radiotherapy alone or in combination with chemotherapy and/or surgery is the typical treatment for head and neck cancer patients. Acute side effects (such as oral mucositis, dermatitis, salivary changes, taste alterations, etc.), and late toxicities in particular (such as osteo-radionecrosis, hypo-salivation and xerostomia, trismus, radiation caries etc.), are often debilitating. These effects tend to be underestimated and insufficiently addressed in the medical community. A multidisciplinary group of head and neck cancer specialists met in Milan with the aim of reaching a consensus on clinical definitions and management of these toxicities. The Delphi Appropriateness method was used for developing the consensus, and external experts evaluated the conclusions. This paper contains 10 clusters of statements about the clinical definitions and management of head and neck cancer treatment sequels (dental pathologies and osteo-radionecroses) that reached consensus, and offers a review of the literature about these topics. The review was split into two parts: the first part dealt with dental pathologies and osteo-radionecroses (10 clusters of statements), whereas this second part deals with trismus and xerostomia., (Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.)

The aim of this case report was to treat eight simultaneous recessions that caused an unesthetic smile in a 27-year-old orthodontically treated female patient and to restore the anterior maxillary teeth in the esthetic area. The treatment consisted of bilaminar mucogingival surgery with a palatine graft and a collagen matrix graft (Mucograft, Geistlich). At 24 months, complete root coverage was achieved in all treated sites, with an increase of keratinized tissue (KT), complete resolution of hypersensitivity, and a high level of esthetic satisfaction. This case report shows that it is possible to correct multiple unesthetic recessions in one stage thanks to the combination of a connective tissue graft (CTG), a collagen matrix graft, and a coronally advanced flap (CAF).

The objective of this study was to demonstrate the correlation between endodontic treatment on maxillary teeth and fungus ball with inductively coupled plasma mass spectrometry measurement of zinc and other metals (barium, lead and copper) in fungus ball samples. Samples of normal maxillary mucosa were used as comparison. Metal concentration was also measured in several endodontic materials. A significant difference was found between the concentration of zinc and copper in fungus ball compared to normal mucosa. Metal distribution was more similar in fungus ball and in the endodontic materials tested than normal mucosa. The similar metal concentration in the endodontic materials and fungus ball suggests that endodontic materials play a role in the pathogenesis of fungus ball. Endodontic materials accidentally pushed into the maxillary sinus during endodontic treatments may play a crucial role. Dentists should be as careful as possible when treating maxillary teeth to avoid perforating the maxillary sinus floor; the use of zinc-free endodontic materials, as zinc is a metal that plays a pivotal role in fungus growth, should be encouraged.

Purpose: The aim of this study was to assess the prevalence of intraoperative complications during maxillary sinus elevation with lateral approach using a piezoelectric device with two different surgical techniques., Materials and Methods: Antrostomies were randomly performed by outlining a window (group A, 36 patients) or by eroding the cortical wall with a grinding insert until the membrane was visible under a thin layer of bone, before outlining the window (group B, 36 patients). Occurrence of membrane perforation, laceration of vascular branches, and surgical time was recorded., Results: Seventy-two patients underwent sinus floor elevation: four perforations (11.1%) were observed in group A (two occurred during elevation with hand instruments) and zero perforations in group B (p < .05). No evidence of vascular lacerations was registered in both groups. A clinically insignificant but statistically shorter surgical time was recorded in group A (9.2 ± 3.7 minutes) than in group B (13.3 ± 2.4 minutes; p < .05)., Conclusions: Within the limits of the present study, it may be concluded that ultrasonic erosion of the lateral wall of the sinus is a more predictable technique than piezoelectric outlining of a bone window in preventing from accidental perforations of Schneiderian membrane during sinus augmentation procedures., (© 2013 Wiley Periodicals, Inc.)

Aquaporins (AQPs) are a family of hydrophobic integral membrane proteins that function as transmembrane channels and play an important role in tissue homeostasis. Aquaporin-1 (AQP1), in particular, has been reported to be involved in several biological processes including inflammation, angiogenesis, wound healing and others. Periodontitis and peri-implantitis can be defined as inflammatory processes that affect the tissues surrounding a tooth or an osseointegrated implant, respectively. To date, there are limited data about the involvement of AQPs in these diseases. The aim of this study was to evaluate the possible link between the histomorphological alterations and the expression of AQP1 in healthy, pathological and healed periodontal and peri-implant gingival tissues. The results obtained showed that changes in organization of collagen fibers were observed in periodontitis and peri-implantitis, together with an increase in the percentage of area occupied by inflammatory cell infiltration and an increase of AQP1 immunostaining, which was located in the endothelial cells of the vessels within the lamina propria. Moreover, in healed periodontal and peri-implant mucosa a restoration of histomorphological alterations was observed together with a concomitant decrease of AQP1 immunostaining. These data suggested a possible link between the degree of inflammatory state and the presence of AQP1, where the latter could be involved in the chain of inflammatory reactions triggered at periodontal and peri-implant levels., (Copyright © 2014 Elsevier GmbH. All rights reserved.)

Introduction: The aim of this study was to review the literature and evaluate the failure rates and factors that affect the stability and success of temporary anchorage devices (TADs) used as orthodontic anchorage., Methods: Data were collected from electronic databases: MEDLINE database, Scopus, and Web of Knowledge. Four combinations of term were used as keywords: screw orthodontic failure, screw orthodontic success, implant orthodontic failure, and implant orthodontic success. The following selection criteria were used to select appropriate articles: articles on implants and screws used as orthodontic anchorage, data only from human subjects, studies published in English, studies with more than 50 implants/screws, and both prospective and retrospective clinical studies., Results: The search provided 209 abstracts about TADs used as anchorage. After reading and applying the selection criteria, 26 articles were included in the study. The data obtained were divided into two topics: which factors affected TAD success and to what degree and in how many articles they were quoted. Clinical factors were divided into three main groups: patient-related, implant-related, and management-related factors., Conclusions: Although all articles included in this meta-analysis reported success rates of greater than 80 per cent, the factors determining success rates were inconsistent between the studies analysed and this made conclusions difficult.

Objective: To evaluate the timing of spontaneous maxillary canine eruption in relation to stages of mandibular second molar maturation. Potential confounding effects from such factors as age, growth phase, and facial features were also explored., Subjects and Methods: A sample of 106 healthy subjects (48 females and 58 males; age range, 9.4-14.3 years) with both permanent maxillary canines during the final phase of intraoral eruption were included. Mandibular second molar maturation (stages E to H) was assessed according to the method of Demirjian. Skeletal maturity was determined using the cervical vertebral maturational (CVM) method. Facial vertical and sagittal relationships were evaluated by recording the Sella-Nasion/mandibular plane (SN/MP) angle and the ANB angle. An ordered multiple logistic regression was run to evaluate adjusted correlation of each parameter with the mandibular second molar maturational stage., Results: Overall, the prevalence of the different second molar maturational stages was 36.8%, 37.8%, and 27.4% for stages E, F and G, respectively. According to the regression model, this relation was not influenced by sex, CVM stage, SN/MP angle, and ANB angle., Conclusions: Irrespective of sex, growth phase, and facial features, the maturational stage of the mandibular second molar may be a reliable indicator for the timing of spontaneous eruption of the maxillary canine.

The present meta-analysis initially evaluates the reliability of dental maturation in the identification of the circumpubertal growth phases, essentially for determining treatment timing in orthodontics. A literature survey was performed using the Medline, LILACS and SciELO databases, and the Cochrane Library (2000 to 2011). Studies of the correlation between dental and cervical vertebral maturation methods were considered. The mandibular canine, the first and second premolars, and the second molar were investigated. After the selection, six articles qualified for the final analysis. The overall correlation coefficients were all significant, ranging from 0.57 to 0.73. Five of these studies suggested the use of dental maturation as an indicator of the growth phase. However, the diagnostic performance analysis uncovered limited reliability only for the identification of the pre-pubertal growth phase. The determination of dental maturity for the assessment of treatment timing in orthodontics is not recommended.

The aim of this study was to evaluate microtensile bond strength (μTBS) to dentine, interfacial nanoleakage expression, and stability after ageing, of two-step vs. one-step self-etch adhesives. Human molars were cut to expose middle/deep dentine, assigned to groups (n = 15), and treated with the following bonding systems: (i) Optibond XTR (a two-step self-etch adhesive; Kerr), (ii) Clearfil SE Bond (a two-step self-etch adhesive; Kuraray), (iii) Adper Easy Bond (a one-step self-etch adhesive; 3M ESPE), and (iv) Bond Force (a one-step self-etch adhesive; Tokuyama). Specimens were processed for μTBS testing after 24 h, 6 months, or 1 yr of storage in artificial saliva at 37°C. Nanoleakage expression was examined in similarly processed additional specimens. At baseline the μTBS results ranked in the following order: Adper Easy Bond = Optibond XTR ≥Clearfil SE = Bond Force, and interfacial nanoleakage analysis showed Clearfil SE Bond = Adper Easy Bond = Optibond XTR> Bond Force. After 1 yr of storage, Optibond XTR, Clearfil SE Bond, and Adper Easy Bond showed higher μTBS and lower interfacial nanoleakage expression compared with Bond Force. In conclusion, immediate bond strength, nanoleakage expression, and stability over time were not related to the number of steps of the bonding systems, but to their chemical formulations., (© 2012 Eur J Oral Sci.)

Purpose: The design of an implant plays a fundamental role in the osseointegration process, particularly in low-density bone. It has been postulated that design features that maximize the surface area available for contact may improve mechanical anchorage and primary stability in cancellous bone. Two different implant profiles were compared to evaluate the influence of thread pitch on the osseointegration process in bone of low density and limited height., Materials and Methods: "Narrow-pitch" implants (NP) with a 0.5-mm pitch and "wide-pitch" implants (WP) with a 1.7-mm pitch were tested for osseointegration after 0 days and 4 and 8 weeks in a sheep iliac crest model. The two different implants were analyzed with biologic and biomechanical tests., Results: The present findings showed that initial mechanical anchorage and subsequent early endosseous integration in low-density bone could be improved by a reduction of thread pitch. The greater surface area gained by decreasing thread pitch increased bone-implant contact and primary stability from the time of implant placement. This better performance of the NP profile could be appreciated even at an early healing time when the subsequent biologic integration was enhanced not only in terms of a higher quantity of newly deposited bone but also more regular and mature geometric distribution of bone tissue at the interface., Conclusion: These results confirmed that, when primary stability is a concern, as in cancellous bone, increasing the implant surface area by using implants with smaller pitch might be beneficial.

In the present pilot study, the authors morphologically investigated sandblasted, acid-etched surfaces (SLA) at very early experimental times. The tested devices were titanium plate-like implants with flattened wide lateral sides and jagged narrow sides. Because of these implant shape and placement site, the device gained a firm mechanical stability but the largest portion of the implant surface lacked direct contact with host bone and faced a wide peri-implant space rich in marrow tissue, intentionally created in order to study the interfacial interaction between metal surface and biological microenvironment. The insertion of titanium devices into the proximal tibia elicited a sequence of healing events. Newly formed bone proceeded through an early distance osteogenesis, common to both surfaces, and a delayed contact osteogenesis which seemed to follow different patterns at the two surfaces. In fact, SLA devices showed a more osteoconductive behavior retaining a less dense blood clot, which might be earlier and more easily replaced, and leading to a surface-conditioning layer which promotes osteogenic cell differentiation and appositional new bone deposition at the titanium surface. This model system is expected to provide a starting point for further investigations which clarify the early cellular and biomolecular events occurring at the metal surface.

Aim: Primary implant stability as the establishment of a direct bone-to-implant contact (BIC) plays a major role in long-term successful implant osseointegration. Numerous factors influencing this initial stability have been studied. This preliminary in vivo study on a dog lower jaw aimed to investigate the hypothesis that primary implant stability in low density bone may be influenced by implant design., Methods: The authors compared two different implant designs with regard to their immediate quantitative relation to host bone (BIC% and gap area, GA%). The screw-shaped implants, manufactured by Or-Vit (Castelmaggiore-Bologna, Italy), exhibited similar microroughness surface and two different thread pitches: ''narrow-pitch'' implants (NP) and ''wide-pitch'' implants (WP) with a 0.5 mm and 1.5 mm thread pitch respectively. Implants were placed in dog jaw after complete osseous healing of the extractive sockets, according to a delayed implantation procedure. Five hours after surgery the animal was sacrificed. Radiographic, histological, morphometric and ultrastructural analysis were performed., Results: An inverse relation existed among the two parameters BIC and GA: GA, as a region with high osteogenetic potentiality, appeared wider in WP implants; BIC, as the expression of primary mechanical stability, was higher in NP implants., Conclusion: Based on this results, we could assume that NP implants might be the clinical choice in case of immediate loading.This single case study might be considered a starting point for further long term in vivo investigations aiming to establish the implant design that best favours osseointegration at different bone quality sites.

It has been suggested that heat-shock proteins (HSPs) might be involved in autoimmune disease mechanisms in humans, considering the high degree of sequence homology between bacterial and human HSPs. Several authors have postulated that HSPs might be involved in periodontal disease processes, but not specifically in peri-implantitis. Consequently, using immunohistochemical techniques, we studied the distribution of HSP25, HSP32, HSP60 and HSP72 in three groups of patients: (1) subjects with natural teeth (healthy periodontal tissue), (2) subjects with normal peri-implant mucosa and (3) subjects with clinically evident peri-implantitis. The immunolabelling for HSP25 and HSP60 was increased in the peri-implantitis group HSP32 immunolabelling slightly decreased in peri-implant and peri-implantitis gingiva. Labelling for HSP72 was undetectable in all three groups. In conclusion, we observed in peri-implantitis a clearly enhanced immunolabelling of two specific HSPs, HSP25 and HSP60, restricted to gingival epithelium and this could indicate a signal of local altered homeostasis.

The extra-cellular matrix of the gingival tissue plays an important role in the homeostasis of dental implants. In this work we have studied immunohistochemically the distribution of collagen I-III-IV-V, tenascin, metalloproteinases (MMP) 1-3-8-13 and TIMP-1 in three groups of patients: (1) subjects with natural teeth (healthy periodontal tissue), (2) subjects with normal peri-implant mucosa and (3) subjects with clinically evident peri-implantitis. The immunolabelling for collagen I-III-IV showed a similar pattern in all three groups. The labelling for collagen V increased in lamina propria of healthy peri-implant tissue and peri-implantitis. Tenascin immunolabelling in healthy and peri-implant tissues was scattered in lamina propria. In peri-implantitis tenascin immunolabelling increased mainly near to the basal lamina. The MMP-1-3-8 and TIMP-1 immunolabelling were very faint and localized in the stroma in all three groups. In healthy and peri-implant tissues MMP-13 immunolabelling was found in the lamina propria whereas in peri-implantitis MMP-13 immunolabelling was also in epithelium. On the whole, these data suggest that in the extracellular matrix of peri-implantitis there are alterations of collagen V, tenascin and MMP-13 patterns.

Objective: The purpose was to show the capacity of zinc oxide and eugenol to affect the growth of Aspergillus fumigatus., Study Design: An in vitro microbiological analysis was conducted on samples from infected maxillary sinuses and on 3 different endodontic sealers., Results: Tests showed that zinc oxide in solution favors the growth of Aspergillus fumigatus, while eugenol inhibits this growth, even when mixed with zinc oxide powder. This inhibiting effect decreases over time. A reduced effectiveness was demonstrated over a 75-day period., Conclusions: The hypothesis is that the diminishing concentration of eugenol over time in endodontic sealers allows the zinc oxide to support growth of Aspergillus fumigatus. This is reinforced by clinical experience, where mycetoma has developed years after endodontic therapy with excess sealer in the maxillary sinus.

We consider a non-standard design for a fixed dental implant, incorporating a soft layer which simulates the presence of the periodontal ligament (PDL). Instead of being aimed at causing an a priori defined stress/strain field within the surrounding bone, upon loading, such a design simply tries to better reproduce the natural tooth-PDL configuration. To do this, the mechanical properties of the internal layer match those of the PDL, determined experimentally to be strongly nonlinear. Three-dimensional finite element analyses show that the presence of such a layer produces (i) a prosthesis mobility very similar to that of a healthy tooth, for several loading conditions, and (ii) a stress/strain distribution substantially different from that arising, upon loading, around a conventional implant. The lack of knowledge of the real mechanical fields existing, under loading, in the bone around a healthy tooth makes it very difficult to state that the stress distribution produced by the modified implant is "better" than that produced by the standard one. Nevertheless, the comparison of the results obtained here, with those of previous refined analyses of the tooth-PDL-bone system, indicates that the modified implant tends to produce a stress distribution in the bone, upon loading, closer to "natural" than that given by the standard one, within the limits imposed by the presence of threads coupling the implant with the bone.

Aims: In the dental field, the aim of the research was to evaluate, through a standardized system, the factors influencing the corrosion of dental alloys in different clinical conditions with various types of amalgams and/or solution parameters., Methods: A 6-hole corrosion cell was used according to ASTM G5-95 protocol., Results and Conclusions: It is well known that free surface corrosion is uncommon in the oral cavity in the case of most dental alloys. But localized corrosion, either as pitting or as crevice corrosion, might occur. The clinical conditions affecting amalgam corrosion may be detectable in localized corrosion, in particular because of cathodic/anodic surface behaviour coupling.

Recent researches in animals about correlation between decay and sugar, pointed out that frequency of assumption is more important than quantity. The Authors want to have a confirm examining 1810 5-years-aged children, pointing out the relationship among beverages, sugar-containing foods and dmft index. The results show a caries increment drinking soft drinks beverages. The frequency of sugar containing food assumption seems to be strictly related to dental caries improvement and to the reduction of dmft = 0 cases.