Search

Antibiotic contamination of water sources is a significant environmental and public health concern. This contamination is classified among the most dangerous types of pollution currently because of their harmful effects. Therefore, it is essential to identify effective and environmentally friendly ways to deal with those dangerous compounds. Within this context, this work looked into whether soils made from volcanic ash could be used as cost-effective adsorbents to remove the antibiotic trimethoprim (TRM) from aqueous solutions. To examine the impacts of the main operating parameters on TRM removal, which are the initial antibiotic concentration (C), contact time (t), stirring speed (S), and solid-to-liquid ratio (R), a Central Composite Design (CCD) based on the Response Surface Methodology (RSM) was employed. Full quadratic polynomial models were used to correlate the experimental data, allowing for the estimation of each factor’s influence. With a predicted removal efficiency of 77.59%, the removal process optimization yielded the following set of optimal conditions: C = 4.5 mg/L, t = 45.5 min, S = 747 rpm, and R = 0.04 g/mL. Experiments conducted under predicted ideal conditions supported both the result and the previously developed model’s capacity for prediction. Additionally, the adsorption mechanism was also proposed based on the characterization of the adsorbent before and after the treatment. The study’s findings provide the possibility of using soils formed from volcanic ash as a cost-effective adsorbent material for the removal of TRM and likely other similar pollutants from contaminated waters.

Large amounts of spent coffee grounds (SCGs) are produced annually worldwide. SCGs contain high levels of phenolics and other bioactive compounds that make them a potential source of reducing and stabilizing agents for the synthesis of metal nanoparticles. This study investigates the use of SCG extracts as a green strategy to produce silver nanoparticles (AgNPs). SCG extracts were obtained using aqueous ethanol as the solvent and then contacted with a silver nitrate solution under the selected conditions. A central composite design coupled with response surface methodology was used to evaluate the effects of solvent composition (C = 30–70% v/v), silver-to-phenolic ratio (R = 3–7 mol/mol), temperature (T = 25–55 °C) and pH (10–12) on the production of AgNPs. Characterization of AgNPs by DLS, TEM and XRD techniques showed that they were highly crystalline with a narrow size distribution. Under optimal reaction conditions, AgNPs with an average size of about 10 nm and a zeta potential of −30.5 to −20.7 mV were obtained. Overall, the results of this study indicate that SCGs are a promising material for the green synthesis of small-sized and stable AgNPs.

The use of kiwifruit juice as a source of metal-reducing and stabilizing agents for the production of gold nanoparticles (AuNPs) was investigated. The reaction was carried out in batch by mixing appropriate amounts of kiwifruit juice and gold(III) chloride solution. The formation of AuNPs was monitored by measuring the intensity of the surface plasmon resonance (SPR) band of gold. The effects of temperature (20–60 °C), pH (8–12) and gold-to-polyphenol ratio (GPR) were investigated. Characterisation of AuNPs by XRD, DLS and zeta-potential measurements showed that they were highly crystalline, with an average hydrodynamic diameter of about 50 nm and a zeta-potential ranging between –29.2 and –21.7 mV. Under the best reaction conditions (60 °C, pH 9, GPR = 5 mol Au3+/mol GAE), AuNPs with an average size of about 30 nm were produced. The results obtained suggest that kiwifruit juice is a suitable medium for the production of small-sized and stable AuNPs.

The increasing world population generates huge amounts of wastewater as well as large energy demand. Additionally, fossil fuel’s combustion for energy production causes the emission of greenhouse gases (GHG) and other pollutants. Therefore, there is a strong need to find alternative green approaches for wastewater treatment and energy production. Microalgae biorefineries could represent an effective strategy to mitigate the above problems. Microalgae biorefineries are a sustainable alternative to conventional wastewater treatment processes, as they potentially allow wastewater to be treated at lower costs and with lower energy consumption. Furthermore, they provide an effective means to recover valuable compounds for biofuel production or other applications. This review focuses on the current scenario and future prospects of microalgae biorefineries aimed at combining wastewater treatment with biofuel production. First, the different microalgal cultivation systems are examined, and their main characteristics and limitations are discussed. Then, the technologies available for converting the biomass produced during wastewater treatment into biofuel are critically analyzed. Finally, current challenges and research directions for biofuel production and wastewater treatment through this approach are outlined.

Oxidative stress originates from an elevated intracellular level of free oxygen radicals that cause lipid peroxidation, protein denaturation, DNA hydroxylation, and apoptosis, ultimately impairing cell viability. Antioxidants scavenge free radicals and reduce oxidative stress, which further helps to prevent cellular damage. Medicinal plants, fruits, and spices are the primary sources of antioxidants from time immemorial. In contrast to plants, microorganisms can be used as a source of antioxidants with the advantage of fast growth under controlled conditions. Further, microbe-based antioxidants are nontoxic, noncarcinogenic, and biodegradable as compared to synthetic antioxidants. The present review aims to summarize the current state of the research on the antioxidant activity of microorganisms including actinomycetes, bacteria, fungi, protozoa, microalgae, and yeast, which produce a variety of antioxidant compounds, i.e., carotenoids, polyphenols, vitamins, and sterol, etc. Special emphasis is given to the mechanisms and signaling pathways followed by antioxidants to scavenge Reactive Oxygen Species (ROS), especially for those antioxidant compounds that have been scarcely investigated so far.

The aim of this study was to assess the effects of commercially available and relatively inexpensive enzyme preparations based on endo 1,4-β-xylanase, pectinase and xyloglucanase on the thermal (TGA), morphological (SEM), chemical (FT-IR) and mechanical (single yarn tensile tests) properties of flax yarns. The preparation based on pectinase and xyloglucanase provided the best results, resulting in the effective removal of hydrophilic components such as hemicellulose and pectin, the individualization of yarns and increased thermal stability at the expense of a reduction in mechanical properties, depending on the treatment parameters. Single yarn fragmentation tests pointed out an improved interfacial adhesion after enzymatic treatment, with reduced debonding length values of 18% for an epoxy matrix and up to 36% for a vinylester resin compared to untreated flax yarns.

The presence of azo dyes in textile effluents is an issue of major concern due to their potential impact on the environment and human health. In this study we investigate the photocatalytic degradation under visible light of Reactive Violet 5 (RV5), an azo dye widely used in the textile industry. A preliminary screening of different titania-based catalysts was carried out to identify the best candidate for RV5 removal. The selected catalyst was then tested in a stirred and aerated lab-scale reactor illuminated with a blue light-emitting diode (LED) source emitting in the wavelength range of 460−470 nm. The effects of pH, catalyst load, and hydrogen peroxide additions on the efficiency of dye removal were evaluated. Under the best conditions (pH 10, 3 g/L of catalyst, and 60 mM hydrogen peroxide), the dye solution was completely decolorized in about 2 h. Overall, the results obtained suggest that the proposed process may represent a suitable method for the removal of RV5 from textile effluents.

This study investigates distillery wastewater, commonly known as vinasse, as a potential culture medium for the production of Chlorella vulgaris and its most relevant metabolites. The effect of vinasse concentration on the composition of the biomass (proteins, carbohydrates, and lipids) was evaluated in treatments performed in 6-L tubular air-lift reactors. The reactors were operated at 25 °C for 18 days, in total darkness, under a continuous flow of air. Results showed a rapid growth of microalgae in the first ten days, when an average production of 0.87 g/L was reached. Then, the daily biomass productivity began to decrease, up to an average value of 11.8 g/L at the 16th day. For all treatments, there was a significant reduction in the concentration of most metabolites in the first eight days. This was likely due to the adaptation of the biomass to the new conditions, with a transition from autotrophic to heterotrophic metabolism. From the 10th day, the concentration of metabolites in the biomass began to increase, reaching a nearly constant value at the 16th day. The observed maximum concentrations (%w/w) were: 48.95% proteins, 2.88% xylose, 7.82% glucose, 4.54% arabinose, 8.28% fructose, and 4.82% lipids. These values were only marginally affected by the type of treatment. Overall, the results obtained suggest that vinasse is a promising and sustainable medium for the growth of C. vulgaris and the production of valuable metabolites.

This work investigates the feasibility of using coffee silverskin (CSS), one of the most abundant coffee waste products, as a reinforcing agent in biopolymer-based composites. The effect of using two compatibilizers, a maleinized linseed oil (MLO) and a traditional silane (APTES, (3-aminopropyl)triethoxysilane), on mechanical and thermal behavior of sustainable composites based on a poly(butylene adipate-co-terephthalate/Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) PBAT/PHBV blend filled with coffee silverskin, in both the as-received state and after the extraction of antioxidants, was studied. Thermal (by differential scanning calorimetry), mechanical (by tensile testing), and morphological properties (by scanning electron microscopy) of injection molded biocomposites at three different weight contents (10, 20, and 30 wt %) were considered and discussed as a function of compatibilizer type. The effects of extraction procedure and silane treatment on surface properties of CSS were investigated by infrared spectroscopy. Obtained results confirmed that extracted CSS and silane-treated CSS provided the best combination of resistance properties and ductility, while MLO provided a limited compatibilization effect with CSS, due to the reduced amount of hydroxyl groups on CSS after extraction, suggesting that the effects of silane modification were more significant than the introduction of plasticizing agent.