Search

Photocatalytic water splitting for hydrogen evolution is a highly topical subject in academic research and a promising approach for sustainable fuel production from solar energy. Due to the mismatched energy diagram of the photosensitizer (especially semiconductor‐based materials where band‐edge engineering is not trivial) and the redox potential of the half‐reactions of water splitting, photocatalytic H2 generation from water splitting is usually accelerated by the addition of hole scavengers, i.e. sacrificial reagents such as alcohols, amines, and thiols. However, the source of the protons of the evolved H2 is often neglected, and it is questionable whether such systems are really water splitting. Here, we discuss recent reports on sacrificial reagent‐assisted photocatalytic water splitting and present our recent findings, which showcase that the sacrificial reagent in the investigated photocatalytic water splitting systems inherently undergoes acceptorless dehydrogenation, with H2O serving as the proton shuttle, the amount of which doesn't change during the course of the reaction. [ABSTRACT FROM AUTHOR]

Porous materials‐based heterogeneous photocatalysts, performing selective organic transformations, are increasing the applicability of photocatalytic reactions due to their ability to merge traditional photocatalysis with structured pores densely decorated with catalytic moiety for efficient mass and charge transfer, as well as added recyclability. We herein disclose a porous crystalline covalent triazine framework (CTF)‐based heterogeneous photocatalyst that exhibits excellent photoredox properties for different hydrofunctionalization reactions such as hydrocarboxylations, hydroamination and hydroazidations. The high oxidizing property of this CTF enables the activation of styrenes, followed by regioselective C−N and C−O bond formation at ambient conditions. A change in the physicochemical and optoelectronic properties of the CTF, upon protonation during catalysis, lies at the basis of its photocatalytic properties. This allows us to obtain hydrocarboxylations, hydroamination, and hydroazidations from a myriad of electron‐donating and ‐withdrawing aromatic and aliphatic substrates. This catalytic approach is further extended to late‐stage functionalization of bio‐active molecules. Finally, detailed characterizations of the CTF and further mechanistic investigations provide mechanistic insights into these reactions. [ABSTRACT FROM AUTHOR]

Commercial SSZ‐13 zeolite with different n(Si)/n(Al) ratios and from different suppliers were subjected to a post‐synthetic treatment in order to create mesopores of up to 15 nm. Furthermore, the materials were modified with copper ions and thoroughly physico‐chemically characterized. The modified textural properties varied the nature of copper species, and thus, activity in the selective catalytic reduction of NOx with ammonia (NH3‐SCR‐DeNOx). Pulsed‐field gradient nuclear magnetic resonance (PFG‐NMR) studies with hexane as probe liquid revealed improved intracrystalline diffusion for some Cu‐containing SSZ‐13 materials. The NH3‐SCR‐DeNOx pathways are verified via in situ DR UV‐Vis, in situ FT‐IR and EPR, temperature‐programmed studies as well as SSITKA studies that provide a mechanistic understanding of the reaction. Kinetic modelling results demonstrate the highest NH3‐SCR‐DeNOx reaction rates and up to 20 % lower energy barriers with n(Si)/n(Al) ratio of 6.5 for all modified forms (i. e., (NH4)Cu‐SSZ‐13_6.5 and Cu‐SSZ‐13_6.5_NaOH/0.1) and cause only negligible parasitic ammonia oxidation. The modelling of the stop‐flow experiments further demonstrates that the SCR pathway via the HONO surface intermediate is present but barely contributes to the overall NO conversion compared to the dominant path between adsorbed NH3 and NO from the gas phase. [ABSTRACT FROM AUTHOR]

Propane dehydrogenation (PDH) to propene is an important alternative to oil-based cracking processes, to produce this industrially important platform chemical.sup.1,2. The commercial PDH technologies utilizing Cr-containing (refs. .sup.3,4) or Pt-containing (refs. .sup.5-8) catalysts suffer from the toxicity of Cr(vi) compounds or the need to use ecologically harmful chlorine for catalyst regeneration.sup.9. Here, we introduce a method for preparation of environmentally compatible supported catalysts based on commercial ZnO. This metal oxide and a support (zeolite or common metal oxide) are used as a physical mixture or in the form of two layers with ZnO as the upstream layer. Supported ZnO.sub.x species are in situ formed through a reaction of support OH groups with Zn atoms generated from ZnO upon reductive treatment above 550 °C. Using different complementary characterization methods, we identify the decisive role of defective OH groups for the formation of active ZnO.sub.x species. For benchmarking purposes, the developed ZnO-silicalite-1 and an analogue of commercial K-CrO.sub.x/Al.sub.2O.sub.3 were tested in the same setup under industrially relevant conditions at close propane conversion over about 400 h on propane stream. The developed catalyst reveals about three times higher propene productivity at similar propene selectivity. Propene is obtained through propane dehydrogenation using catalysts that are toxic, expensive or demanding to regenerate with ecologically harmful compounds, but the ZnO-based alternative reported here is cheap, clean and scalable., Author(s): Dan Zhao [sup.1] [sup.2] , Xinxin Tian [sup.2] [sup.3] , Dmitry E. Doronkin [sup.4] , Shanlei Han [sup.1] [sup.2] , Vita A. Kondratenko [sup.2] , Jan-Dierk Grunwaldt [sup.4] , [...]

Herein we present a new strategy for the oxidative synthesis of formamides from various types of amines and bioderived formyl sources (DHA, GLA and GLCA) and molecular oxygen (O2) as oxidant on g‐C3N4 supported Cu catalysts. Combined characterization data from EPR, XAFS, XRD and XPS revealed the formation of single CuN4 sites on supported Cuphen/C3N4 catalysts. EPR spin trapping experiments disclosed ⋅OOH radicals as reactive oxygen species and ⋅NR1R2 radicals being responsible for the initial C−C bond cleavage. Control experiments and DFT calculations showed that the successive C−C bond cleavage in DHA proceeds via a reaction mechanism co‐mediated by ⋅NR1R2 and ⋅OOH radicals based on the well‐equilibrated CuII and CuI cycle. Our catalyst has much higher activity (TOF) than those based on noble metals. [ABSTRACT FROM AUTHOR]

The synthesis of group 4 metal 1‐metallacyclobuta‐2,3‐dienes as organometallic analogues of elusive 1,2‐cyclobutadiene has so far been limited to SiMe3 substituted examples. We present the synthesis of two Ph substituted dilithiated ligand precursors for the preparation of four new 1‐metallacyclobuta‐2,3‐dienes [rac‐(ebthi)M] (M=Ti, Zr; ebthi=1,2‐ethylene‐1,10‐bis(η5‐tetrahydroindenyl)). The organolithium compounds [Li2(RC3Ph)] (1 b: R=Ph, 1 c: R=SiMe3) as well as the metallacycles of the general formula [rac‐(ebthi)M(R1C3R2)] (2 b: M=Ti, R1=R2=Ph, 2 c: M=Ti, R1=Ph, R2=SiMe3; 3 b: M=Zr, R1=R2=Ph; 3 c: M=Zr, R1=Ph, R2=SiMe3) were fully characterised. Single crystal X‐ray diffraction and quantum chemical bond analysis of the Ti and Zr complexes reveal ligand influence on the biradicaloid character of the titanocene complexes. X‐band EPR spectroscopy of structurally similar Ti complexes [rac‐(ebthi)Ti(Me3SiC3SiMe3)] (2 a), 2 b, and 2 c was carried out to evaluate the accessibility of an EPR active triplet state. Cyclic voltammetry shows that introduction of Ph groups renders the complexes easier to reduce. 13C CPMAS NMR analysis provides insights into the cause of the low field shift of the resonances of metal‐bonded carbon atoms and provides evidence of the absence of the β−C−Ti interaction. [ABSTRACT FROM AUTHOR]

Exfoliation into a 2D nanosheet structure can lead to enhanced surface activity and unique optical and electronic properties in polymeric carbon nitride (PCN). In this study, four common exfoliation strategies (liquid ultrasonication, thermal oxidation, hydrothermal oxidation, and chemical oxidation) were adopted, and their effects on the structural and electronic changes in PCN were analyzed in detail. This allows us to understand the relationship between the exfoliation mechanism and the structural/optical properties. Here, we demonstrate that the thermal and ultrasonic exfoliation methods can effectively reduce the thickness of PCN while preserving its original structure. In contrast, the chemical and hydrothermal treatments can strongly affect the morphology and structure of PCN, leading to a decreased performance in phenol photodegradation. Therefore, depending on the employed exfoliation method, the surface area, functionalization, band edge positions, charge carrier generation, and mobility are influenced differently up to the point where semiconducting behavior is entirely lost. Our results allow conclusions about the applicability of the different exfoliation methods to obtain distinct material properties for photocatalytic applications. [ABSTRACT FROM AUTHOR]

Catalytic hydrogenation and oxidative dehydrogenation of N‐heterocycles to produce tetrahydroquinoline and quinoline derivatives are important reactions of particular importance in the agrochemical and pharmaceutical industries. Herein, we report earth‐abundant cobalt nanoparticles supported on hydroxyapatite (HAP) as an inexpensive and efficient catalyst for the hydrogenation and reverse oxidative dehydrogenation of N‐heterocycles. The optimal nanocatalyst exhibits excellent activity in both reactions for a wide range of substrates including (iso)quinolines, acridine, benzo[h]quinoline, quinoxaline and indole. Reactions proceed under relatively mild conditions without requiring any additives. [ABSTRACT FROM AUTHOR]

5-hydroxymethylfurfural (HMF) oxidation in aqueous media using visible photocatalysis is a green and sustainable route for the valorization of lignocellulosic biomass derivatives. Several semiconductors have already been applied for this purpose; however, the use of Poly(heptazine imides), which has high crystallinity and a special cation exchange property that allows the replacement of the cation held between the layers of C3N4 structure by transition metal ions (TM), remains scarce. In this study, PHI(Na) was synthesized using a melamine/NaCl method and used as precursor to prepare metal (Fe, Co, Ni, or Cu)-doped PHI catalysts. The catalysts were tested for selective oxidation of HMF to 2,5-diformylfuran (DFF) in water and O2 atmosphere under blue LED radiation. The catalytic results revealed that the 0.1 wt% PHI(Fe) catalyst is the most efficient photocatalyst while higher Fe loading (1 and 2 wt%) favors the formation of Fe3+ clusters, which are responsible for the drop in HMF oxidation. Moreover, the 0.1 wt% PHI(Fe) photocatalyst has strong oxidative power due to its efficiency in H2O2 production, thus boosting the generation of nonselective hydroxyl radicals (●OH) via different pathways that can destroy HMF. We found that using 50 mM, the highest DFF production rate (393 μmol·h−1·g−1) was obtained in an aqueous medium under visible light radiation. [ABSTRACT FROM AUTHOR]

A photochemical rearrangement of O‐aryl thiocarbamates to the corresponding S‐aryl compounds that is triggered by heterogeneous electron transfer between the substrate and photo‐excited titanium dioxide is presented. The rearrangement is the key‐reaction in the three‐step conversion of phenols into the corresponding thiophenols. The described procedure can be performed at room temperature under aerobic conditions using violet LEDs. The rearrangement has been achieved for 24 electron‐rich substrates with yields up to 99 %. A plausible mechanism is proposed based on the substrate scope, spectroscopic studies, and control experiments. [ABSTRACT FROM AUTHOR]

The development of methods for selective cleavage reactions of thermodynamically stable C−C/C=C bonds in a green manner is a challenging research field which is largely unexplored. Herein, we present a heterogeneous Fe−N−C catalyst with highly dispersed iron centers that allows for the oxidative C−C/C=C bond cleavage of amines, secondary alcohols, ketones, and olefins in the presence of air (O2) and water (H2O). Mechanistic studies reveal the presence of water to be essential for the performance of the Fe−N−C system, boosting the product yield from <1 % to >90 %. Combined spectroscopic characterizations and control experiments suggest the singlet 1O2 and hydroxide species generated from O2 and H2O, respectively, take selectively part in the C−C bond cleavage. The broad applicability (>40 examples) even for complex drugs as well as high activity, selectivity, and durability under comparably mild conditions highlight this unique catalytic system. [ABSTRACT FROM AUTHOR]

Constructing hierarchical and ultrathin‐structured metal sulfides is beneficial for achieving high‐efficiency hydrogen evolution catalysts. Herein, ZnIn2S4 (ZIS) hollow nanoflowers (HNFs) composed of ultrathin nanosheets are creatively synthesized via a facile trisodium citrate‐mediated and stirring‐assisted solvothermal method. Experimental results reveal that the synergy effect of ethanol, trisodium citrate, and continuous stirring during solvothermal synthesis process play a significant role in optimizing microstructure as well as physicochemical properties of as‐prepared ZIS samples. Importantly, the fabricated ZIS HNFs with the thinnest nanosheets (2.28 nm) manifest the highest average photocatalytic hydrogen generation rate of 301.5 μmol h−1, which is 2.3 times higher than that of the pristine ZIS microspheres composed of nanoparticles with Pt as the cocatalyst and triethanolamine (TEOA) as the sacrificial agent and outperforms most reported ZnIn2S4‐based materials under similar testing conditions. Moreover, the optimized sample also shows a hydrogen generation rate of 0.53 μmol h−1.in pure water without any cocatalyst. This controllable agitation of the reaction mixture during the hydro/solvothermal synthesis process offers an eco‐friendly and scalable approach for tuning the microstructure of nanomaterials with enhanced performance for various applications. [ABSTRACT FROM AUTHOR]

Elucidating the reaction mechanism in heterogeneous catalysis is critically important for catalyst development, yet remains challenging because of the often unclear nature of the active sites. Using a molecularly defined copper single‐atom catalyst supported by a UiO‐66 metal–organic framework (Cu/UiO‐66) allows a detailed mechanistic elucidation of the CO oxidation reaction. Based on a combination of in situ/operando spectroscopies, kinetic measurements including kinetic isotope effects, and density‐functional‐theory‐based calculations, we identified the active site, reaction intermediates, and transition states of the dominant reaction cycle as well as the changes in oxidation/spin state during reaction. The reaction involves the continuous reactive dissociation of adsorbed O2, by reaction of O2,ad with COad, leading to the formation of an O atom connecting the Cu center with a neighboring Zr4+ ion as the rate limiting step. This is removed in a second activated step. [ABSTRACT FROM AUTHOR]

Copyright of Angewandte Chemie is the property of Wiley-Blackwell and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)