Search

Molybdenum doped vanadium oxide film on quartz and silicon substrates are grown by pulsed RF magnetron sputtering method. Surface morphology, phase analysis and oxide states are investigated by field emission scanning electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy techniques, respectively. Crystalline nature of the film deposited on both quartz and silicon are depicted. The transmittance and reflectance spectra recorded for the entire solar region. Further, optical constants viz. optical band gap and refractive index of the deposited films are estimated. Wavelength dependent low reflectance characteristic is observed for the deposited film on silicon. IR emittance (εIR) and sheet resistance (Rs) of the film are also evaluated. Copyright © 2017 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

Vanadium oxide films, deposited on aluminium (Al), titanium (Ti) and tantalum (Ta) metal substrates by pulsed RF magnetron sputtering at a working pressure of 1.5 x10−2 mbar at room temperature are found to display mixed crystalline vanadium oxide phases viz., VO2, V2O3, V2O5. The films have been characterized by field-emission scanning electron microscopy, X-ray diffraction, differential scanning calorimetry (DSC) and X-ray photoelectron spectroscopy, and their thermo-optical and electrical properties have been investigated. Studies of the deposited films by DSC have revealed a reversible-phase transition found in the temperature range of 45–49 °C. [ABSTRACT FROM AUTHOR]

Vanadium oxide-molybdenum oxide (VO-MO) thin (21-475 nm) films were grown on quartz and silicon substrates by pulsed RF magnetron sputtering technique by altering the RF power from 100 to 600 W. Crystalline VO-MO thin films showed the mixed phases of vanadium oxides e.g., V2O5, V2O3 and VO2 along with MoO3. Reversible or smart transition was found to occur just above the room temperature i.e., at ~45-50 °C. The VO-MO films deposited on quartz showed a gradual decrease in transmittance with increase in film thickness. But, the VO-MO films on silicon exhibited reflectance that was significantly lower than that of the substrate. Further, the effect of low temperature (i.e., 100 °C) vacuum (10−5 mbar) annealing on optical properties e.g., solar absorptance, transmittance and reflectance as well as the optical constants e.g., optical band gap, refractive index and extinction coefficient were studied. Sheet resistance, oxidation state and nanomechanical properties e.g., nanohardness and elastic modulus of the VO-MO thin films were also investigated in as-deposited condition as well as after the vacuum annealing treatment. Finally, the combination of the nanoindentation technique and the finite element modeling (FEM) was employed to investigate yield stress and von Mises stress distribution of the VO-MO thin films. [ABSTRACT FROM AUTHOR]