Search

Pallets and containers are reused for a long period of time and are circulated and shared among consumers via a pool system. Although attempts have recently been made to convert to an EPR (Extended Producer Responsibility) system in Korea, it is difficult to calculate their mandatory recycling rates because they are treated as the same waste, even though they are clearly different from disposable consumer goods and plastic packaging materials. In this study, we tried to calculate waste generation based on the lifespan of plastic pallets and containers using the probability density function. The life distribution for each material (PE (polyethylene) and PP (polypropylene)) of pallets and containers was derived, and by applying this, the amount of waste generation from 2010 to 2027 was estimated. The Mean Time to Failure among pallets was 9.6 years for PE and 3.2 years for PP, and among containers, was 16.5 years for PE and 12.2 years for PP. Additionally, it was calculated that pallets had a waste generation rate of 67.5% to 75.1% by shipment, and containers 26.9–69.2%. These results can be used to calculate the waste generation rate when calculating the mandatory recycling rate of pallets and containers in the future. However, since pallets and containers are used second-hand, or are exported together with products after being shipped domestically, the amount flowing into recycling companies decreases, so it is considered that supplementation via material balance analysis is necessary to calculate the mandatory recycling rate. [ABSTRACT FROM AUTHOR]

Vinyl, such as those in the form of mulching and vinyl houses, is used to improve agricultural productivity. It is generated as an agriculture waste vinyl (AWV) after use. The collected AWV is transported to a recycling facility and shredded, washed, and compressed to be recycled. Recycled materials can contribute to the circular economy of agriculture as they are used again as an agricultural plastic product. However, in Korea, there are concerns about the illegal disposal (landfill, incineration) of AWV. So, a new management model is needed in which stakeholders voluntarily establish an AWV management system. In this study, a sustainable management strategy was proposed. This strategy is reinforcing the responsibility of the producers of AWV and forms a value chain in the proper discharge after consumption by applying the deposit system proposed to recover AWV. Local governments and the National Agricultural Cooperative Federation (NH) proposed education to curb the illegal disposal of AWV, and for managing areas where a collection system has not yet been established, biodegradable mulching vinyl (BMV) was proposed to minimize the environmental pollution caused by AWV. It was calculated that the EPR contribution was 0.16 USD/kg, and the introduction of BMV was 0.42 USD/kg in Korea. This study will provide a new alternative in countries struggling with AWV management. [ABSTRACT FROM AUTHOR]

The introduction of food waste disposers (FWDs) has been discussed in various countries, and in Korea, a method for utilizing FWDs has been considered. The results of the study show that the use of FWDs is more eco-friendly and economical than other forms of food waste (FW) disposal. However, there are also studies showing that FWDs are worse, for example, they aggravate water pollution and deteriorate the function of municipal wastewater treatment plants (WWTPs). Therefore, this study analyzed the concentration of pollutants of wastewater from FWD and the effect on the operation rate and GHG emission of WWTP when FW was introduced into the sewer by FWD using operation data for each WWTP. As a result of the analysis, when FWD was used, facilities exceeding the appropriate operation rate accounted for 86% of the total WWTP, and net-GHG emissions increased by 58%. Through this, FWD wastewater showed much higher contaminant concentrations than regular wastewater; thus, the introduction of FWD in the current situation will have a negative effect on maintaining the function of WWTP and reducing GHG. To introduce FWDs, improvement in WWTPs regarding pollutant load and discharge characteristics of FW and input of digestion systems through a separate FWD pipe, the introduction of high-efficiency energy facilities, and the recycling of wastewater sludge are necessary to reduce GHG emissions. [ABSTRACT FROM AUTHOR]

Recently, the amount of waste generated in Korea has been increasing, and there have been difficulties disposing of it. As an energy-intensive and raw-materials-oriented industry, the cement industry is facing challenges including overcoming the climate crisis and achieving carbon neutrality. Co-processing was suggested as a solution, but the environmental effects of this have not been specifically studied in Korea. In this study, the effects of using alternative resources (limestone, silica stone, iron ore, and gypsum) and fuel on greenhouse gas (GHG) emissions in the cement industry in Korea were analyzed. GHGs generated from mineral mining were compared to GHGs of alternative resources. The reduction in GHGs by using alternative fuel was calculated via the amount of heat from waste instead of that from bituminous coal. Co-processing can reduce approximately 106.9 kg of CO2 in one ton of cement. The cost savings were estimated to be about USD 3815 million. In addition, the lifespans of landfills would be extended by 7.55 years. [ABSTRACT FROM AUTHOR]

As the amount of sewage sludge (SS) is increasing worldwide, anaerobic digesters (ADP) are being distributed to reduce it and treat it in an environmentally friendly way. In Korea, 20 years have passed since the introduction of ADP, but the number of sewage treatment plants (STP) installed with ADP is only about 10% of the total STP. Accordingly, problems and improvements were examined through material flow analysis targeting STP, and the effect of introducing anaerobic digestion (AD) was analyzed as a way to solve them. As a result of the analysis, the amount of SS generated by the STP (SS-ADP + Co-ADP) installed and operated by an AD was 0.54 kg/m3, and the facility without it was 0.77 kg/m3, showing a reduction effect of about 31%. The SS reduction effect of the facility that only used SS-AD was found to be reduced by 21–24% TOE (Ton Of Equivalent))/day, which has the effect of reducing 794,867 kg-CO2/day of greenhouse gas. In terms of energy efficiency, Co-AD was 86% higher than SS-AD, and biogas production yield was 90% higher than that of SS-AD. Therefore, it is necessary to introduce Co-AD into STP in terms of reducing SS, energy production, and greenhouse gas reduction. [ABSTRACT FROM AUTHOR]