Search

Nanoparticles have addressed many challenges in science and technology and wood science research is one such field that has benefitted from application of metal nanoparticles. The metal nanoparticles that are commercially available for wood protection are synthesised by physical and chemical methods which produces toxic by-products and are expensive. The current study deals with a new approach for utilization of metal nanoparticle for wood protection in an ecofriendly and cost effective way. Metal nanoparticles were synthesised using plant extracts that are known to have wood preservative properties. The synergistic effects of the intrinsic property of plant extracts along with the biocidal property of metal nanoparticles were utilized. Copper oxide nanoparticles were synthesised using leaf extracts of Neem (Azadirachta indica), Pongamia (Pongamia pinnata), Lantana (Lantana camara) and extract of orange peel (Citrus reticulata). The effectiveness of the synthesised plant extract and copper oxide nanoparticle formulation is tested against wood decay fungi using agar mixed with the test substance. Graveyard test is employed to assess the effect of the copper oxide nanoparticle formulation against termites. Preliminary results are promising and studies are progressing to develop a stable and environmentally benign wood preservative formulation of metal nanoparticles and plant extracts.

optimal design feasibility assessments of solar PV systems and hybrid energy based micro grids are having significant importance in the renewable energy sector. For design and feasibility analysis, simulation tools are given a significant importance. In this paper the design and feasibility assessment of the renewable systems using PVsyst and HOMER Pro software has been proposed. A 100 kWp, solar PV park has been modeled using PVsyst simulator, and its performance parameters are assessed based on the PVsyst simulations. HOMER Pro is a hybrid energy-based microgrid design software which is used for the design and feasibility analysis of hybrid energy-based microgrids and mini-grids. Hybrid energy based microgrid is designed and its feasibility analysis is performed. Based on the IEC-61724 standards, actual performance assessment is also presented. [ABSTRACT FROM AUTHOR]

Aim: The present in vitro study aimed to evaluate the transverse strength of heat cure acrylic denture base resins repaired with three different joint surface designs, repair material being the glass-fiber-reinforced self-cure repair material along with surface pretreatment., Materials and Methods: A total of 40 heat cure resin specimens were fabricated and finished to a size of 64 mm × 10 mm × 2.5 mm. These specimens were divided into four groups of 10 each, with butt, round, and bevel repair surface joints, respectively, along with the control group. After the specimens were cut in the middle for the repair procedure to proceed, the aforementioned joint surface contours were prepared for groups I, II, and III, respectively, treated with dimethyl chloride for 30 seconds, and the repair was done with E-glass-fiber-reinforced self-cure repair material., Results: The mean transverse strength of the control group was 100.37 N, which was highest (significant p value of <0.05), followed by group III (bevel joint) 54.23 N, group I (butt joint) 53.93 N, and group II (round joint) 44.55 N., Conclusion: Distribution of stresses evenly in the repair region will be achieved by the proper selection of the joint surface contour, and this study showed that the 45° bevel joint was an appropriate selection along with promising repair material and surface pretreatment., Clinical Significance: Clinically, in the event of repairing a broken denture, a rapid and economically convenient material with superior physical and mechanical properties is important to maintain the adequate transverse strength of the repaired denture. Glass-fiber-reinforced autopolymerizing resin, with a 45° bevel joint design of the broken surfaces and surface pretreatment proved to reduce stress concentration, improving the transverse strength of the repaired heat cure denture base resins.

Aim: This study was undertaken to study the effect of three most commonly used dentifrices for denture cleaning and to find out any positive association between number of strokes by toothbrush and surface roughness of acrylic resin., Materials and Methods: About 40 acrylic rectangular blocks with high finish were polished until surface roughness was calculated as 0 pirn. The materials tested were distilled water as a control group, Patanjali Dant Kanti, Colgate Total Cream, and Cleansodent as dentifrices. Stroking was done with dentifrices, and surface roughness readings were recorded at 1,000, 9,000, and 18,000 strokes., Results: Patanjali Dant Kanti was found to have maximum abrasive potential followed by Colgate Total Cream, followed by Cleansodent and least by distilled water., Conclusion: Surface roughness was found to be directly proportional to the type, size, and fineness of the abrasive component used; the professional denture cleanser (Cleansodent) has less abrasive potential than the regular toothpastes. Among those tested, the highest abrasive potential was found in Patanjali Dant Kanti and lowest by Cleansodent (denture cleanser)., Clinical Significance: The patient as well as dentist should choose the dentifrice with utmost care noting the size and type of abrasives used. Washing the dentures normally with water without toothbrush daily and cleaning of dentures once in 10 to 15 days with a soft toothbrush and professional denture cleanser should be the line of maintenance of dentures.

Aim: Articaine is an amide local anesthetic that differs from other agents of its group due to the presence of thiophene ring instead of a benzene ring. Some researchers claim that articaine is superior to lidocaine in its biologic profile. The aim of the study is to compare the efficacy of articaine with that of lidocaine which has proven efficacy., Materials and Method: This study was done on 50 subjects; 25 of them received 4 % articaine HCl with 1:100000 epinephrine and the next 25 received 2% lignocaine HCl with 1:100000 epinephrine. Time of injection, onset of anesthesia, amount of anesthetic injected were recorded. Efficacy was determined using visual analog scale. The values were statistically analyzed., Results: The mean onset time of anesthesia in study group was 2.07 ± 0.22 and 2.18 ± 0.26 minutes in comparison group. A mean duration of 4.28 +0.78 hours was seen with articaine group and 3.51 + 0.45 hours with the lignocaine group. No statistical difference between the two groups with regard to pain experience., Conclusion: Articaine has similar efficacy as that of lignocaine with slightly longer duration and can be used as an alternative to lignocaine in third molar surgeries., Clinical Significance: Increased availability of local anesthetics has improved interest in research about dental pain control. a quest for new methods of pain reduction is always justified. How to cite this article: R Shruthi, S N Kedarnath, S Mamatha N, Rajaram P, Dinesh B. Articaine For Surgical Removal of Impacted Third Molar; A Comparison With Lignocaine. J Int Oral Health 2013; 5(1):48-53.

Radiographic examination forms an integral component of the clinical assessment routine in patients with temporomandibular joint disorders (TMJ). There are several imaging modalities to visualize the TMJ. Cone beam computed tomography (CBCT) is a developing technique that is being increasingly used in dentomaxillofacial imaging due to its relatively low-dose high-spatial-resolution characteristics. Research in TMJ imaging has been greatly inspired by the advent of CBCT. In this paper we aim to discuss the present scenario of the role of CBCT in TMJ imaging.