Search

Based on the three typical gels under KCl substitution groups, the effect of partial substitution of NaCl by KCl (groups: T 1:0.6 M NaCl; T 2: 0.3 M NaCl +0.3 M KCl; T 3: 0.2 M NaCl +0.4 M KCl; T 4:0.6 M KCl) on the aggregation behavior and gel characteristics of myosin was evaluated. The significant changes in hydrophobicity and sulfhydryl content (P < 0.05) indicate KCl substitution enhances myosin aggregation through hydrophobic interactions and disulfide bonds. According to Ca 2+ -ATP, scanning electron microscopes (SEM) and the rheological results, T2 had a smoother network structure at about 75 °C. Noticeably, T3 had high water holding capacity (WHC), but its gel had some visible cavities. T4 had a gel structure with several irregular aggregates due to a greater aggregation rate. Thus, appropriate partial substitution of NaCl by KCl could enhance beef myosin gel properties and heat-induced aggregation behavior., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Myosin from bighead carp (Aristichthys nobilis) as a main type of fish protein possesses a good emulsifying ability. However, whether bighead carp myosin (BCM) could construct stable Pickering emulsions is still unclear. Therefore, myosin particles and Pickering emulsions stabilized by bighead carp myosin (BCMPEs) were analyzed. The surface structure of BCM particles at 0.6 mol/L NaCl treatment was uniform and compact with a contact angle of 86.4 ± 2.7°, exhibiting the potential ability to construct O/W Pickering emulsions. The size and flocculation index (FI) of BCMPEs decreased with the increase in BCM concentrations of 1%-4% (w/v). Reversely, the size of BCMPEs increased with the increase in oil-water ratios. BCM particles could uniformly distribute at the oil-water interface to stabilize BCMPEs at a BCM concentration of 4% (w/v) and an oil-water ratio of 6:4 (v/v). This study could help explore fish proteins to construct Pickering emulsions for the deep processing of fish products., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

About half of the mutations that lead to hypertrophic cardiomyopathy (HCM) occur in the MYBPC3 gene. However, the molecular mechanisms of pathogenicity of point mutations in cardiac myosin-binding protein C (cMyBP-C) remain poorly understood. In this study, we examined the effects of the D75N and P161S substitutions in the C0 and C1 domains of cMyBP-C on the structural and functional properties of the C0-C1-m-C2 fragment (C0-C2). Differential scanning calorimetry revealed that these mutations disorder the tertiary structure of the C0-C2 molecule. Functionally, the D75N mutation reduced the maximum sliding velocity of regulated thin filaments in an in vitro motility assay, while the P161S mutation increased it. Both mutations significantly reduced the calcium sensitivity of the actin-myosin interaction and impaired thin filament activation by cross-bridges. D75N and P161S C0-C2 fragments substantially decreased the sliding velocity of the F-actin-tropomyosin filament. ADP dose-dependently reduced filament sliding velocity in the presence of WT and P161S fragments, but the velocity remained unchanged with the D75N fragment. We suppose that the D75N mutation alters nucleotide exchange kinetics by decreasing ADP affinity to the ATPase pocket and slowing the myosin cycle. Our molecular dynamics simulations mean that the D75N mutation affects myosin S1 function. Both mutations impair cardiac contractility by disrupting thin filament activation. The results offer new insights into the HCM pathogenesis caused by missense mutations in N-terminal domains of cMyBP-C, highlighting the distinct effects of D75N and P161S mutations on cardiac contractile function.

The binding of small molecules to sarcomeric myosin can elicit powerful effects on the chemomechanical cycle, making them effective therapeutics in the clinic and research tools at the benchtop. However, these myotropes can have complex effects that act on different phases of the crossbridge cycle and which depend on structural, dynamic, and environmental variables. While small molecule binding sites have been identified crystallographically and their effects on contraction studied extensively, small molecule-induced dynamic changes that link structure-function are less studied. Here, we use molecular dynamics simulations to explore how omecamtiv mecarbil (OM), a cardiac myosin-specific myotrope, alters the coordinated dynamics of the lever arm and the motor domain in the pre-powerstroke state. We show that the lever arm adopts a range of orientations and find that different lever arm orientations are accompanied by changes in the hydrogen bonding patterns near the converter. We find that the binding of OM to myosin reduces the conformational heterogeneity of the lever arm orientation and also adjusts the average lever arm orientation. Finally, we map out the distinct conformations and ligand-protein interactions adopted by OM. These results uncover some structural factors that govern the motor domain-tail orientations and the mechanisms by which OM primes the pre-powerstroke myosin heads.

Cardiac function relies on the autonomous molecular contraction mechanisms in the ventricular wall. Contraction is driven by ordered motor proteins acting in parallel to generate a macroscopic force. The averaged structure can be investigated by diffraction from model tissues such as trabecular and papillary cardiac muscle using collimated synchrotron beams, offering high resolution in reciprocal space. In the ventricular wall, however, the muscle tissue is compartmentalized into smaller branched cardiomyocytes, with a higher degree of disorder. We show that X-ray diffraction is now also capable of resolving the structural organization of actomyosin in single isolated cardiomyocytes of the ventricular wall. In addition to the hexagonal arrangement of thick and thin filaments, the diffraction signal of the hydrated and fixated cardiomyocytes was sufficient to reveal the myosin motor repeat (M3), the troponin complex repeat (Tn), and the sarcomere length. The sarcomere length signal comprised up to 13 diffraction orders, which were used to compute the sarcomere density profile based on Fourier synthesis. The Tn and M3 spacings were found in the same range as previously reported for other muscle types. The approach opens up a pathway to record the structural dynamics of living cells during the contraction cycle, toward a more complete understanding of cardiac muscle function., Competing Interests: Declaration of interests The authors declare no competing interests., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

This study investigated the effects of ethanol, 1,2-propanediol, and glycerol on the structure and aggregation behavior of silver carp (Hypophthalmichthys molitrix) myosin. All alcohols induced extensive alteration in the tertiary structure of myosin. Both ethanol and 1,2-propanediol further promoted an increase in the content of β-sheets in myosin and induced myosin aggregation. While glycerol had almost no impact on the secondary structure of myosin. Molecular dynamics simulations revealed that increasing the concentration of ethanol and 1,2-propanediol affected the overall structural changes in the myosin heavy chain (MHC), while glycerol exerted a more pronounced effect on the MHC tail when compared to the MHC head. Disruption of the hydration layers induced by ethanol and 1,2-propanediol contributed to local structural changes in myosin. Glycerol at a concentration of 20% induced the formation of a larger hydration layer around the MHC tail, which facilitated the stabilization of the protein structure., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

Sturgeon, with 4 times higher lipid content than silver carp (ubiquitously applied for surimi production in China), affects surimi gelling properties. However, how the flesh lipids affect gelling properties remains unclear. This study investigated how flesh lipids impact surimi gelling properties and elucidated the interaction mechanism between lipids and proteins. Results revealed yellow meat contains 7 times higher lipids than white meat. Stronger ionic protein-protein interactions were replaced by weaker hydrophobic forces and hydrogen bonds in protein-lipid interaction. Protein-lipid interaction zones encapsulated lipid particles, changing protein structure from α-helix to β-sheet structure thereby gel structure becomes flexible and disordered, significantly diminishing surimi gel strength. Docking analysis validated fatty acid mainly binding at Ala577, Ile461, Arg231, Phe165, His665, and His663 of myosin. This study first reported the weakened surimi gelling properties from the perspective of free fatty acids and myosin interactions, offering a theoretical basis for sturgeon surimi production., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Myosin-7a is an actin-based motor protein vital for auditory and visual processes. Mutations in myosin-7a lead to Usher syndrome type 1, the most common and severe form of deaf-blindness in humans. It is hypothesized that myosin-7a forms a transmembrane adhesion complex with other Usher proteins, essential for the structural-functional integrity of photoreceptor and cochlear hair cells. However, due to the challenges in obtaining pure, intact protein, the exact functional mechanisms of human myosin-7a remain elusive, with limited structural and biomechanical studies available. Recent studies have shown that mammalian myosin-7a is a multimeric motor complex consisting of a heavy chain and three types of light chains: regulatory light chain (RLC), calmodulin, and calmodulin-like protein 4 (CALML4). Unlike calmodulin, CALML4 does not bind to calcium ions. Both the calcium-sensitive, and insensitive calmodulins are critical for mammalian myosin-7a for proper fine-tuning of its mechanical properties. Here, we describe a detailed method to produce recombinant human myosin-7a holoenzyme using the MultiBac Baculovirus protein expression system. This yields milligram quantities of high-purity full-length protein, allowing for its biochemical and biophysical characterization. We further present a protocol for assessing its mechanical and motile properties using tailored in vitro motility assays and fluorescence microscopy. The availability of the intact human myosin-7a protein, along with the detailed functional characterization protocol described here, paves the way for further investigations into the molecular aspects of myosin-7a in vision and hearing.

This study investigated the individual and combined effects of l-arginine, l-lysine, and NaCl on the ultrastructure of porcine myofibrils to uncover the mechanism underlying meat tenderization. Arg or Lys alone shortened A-bands and damaged M-lines, while NaCl alone destroyed M- and Z-lines. Overall, Arg and Lys cooperated with NaCl to destroy the myofibrillar ultrastructure. Moreover, these two amino acids conjoined with NaCl to increase myosin solubility, actin band intensity, and the protein concentration of the actomyosin supernatant. However, they decreased the turbidity and particle size of both myosin and actomyosin solutions, and the remaining activities of Ca 2+ - and Mg 2+ -ATPase. The current results revealed that Arg/Lys combined with NaCl to extract myosin and dissociate actomyosin, thereby aggravating the destruction of the myofibrillar ultrastructure. The present results provide a good explanation for the previous phenomenon that Arg and Lys cooperated with NaCl to improve meat tenderness., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The emulsification activity of myosin plays a significant role in affecting quality of emulsified meat products. High-density lipoprotein (HDL) possesses strong emulsification activity and stability due to its structural characteristics, suggesting potential for its utilization in developing functional emulsified meat products. In order to explore the effect of HDL addition on emulsification stability, rheological properties and structural features of myosin (MS) emulsions, HDL-MS emulsion was prepared by mixing soybean oil with isolated HDL and MS, with pH adjustments ranging from 3.0 to 11.0. The results found that emulsification activity and stability in two emulsion groups consistently improved as pH increased. Under identical pH, HDL-MS emulsion exhibited superior emulsification behavior as compared to MS emulsion. The HDL-MS emulsion under pH of 7.0-11.0 formed a viscoelastic protein layer at the interface, adsorbing more proteins and retarding oil droplet diffusion, leading to enhanced oxidative stability, compared to the MS emulsion. Raman spectroscopy analysis showed more flexible conformational changes in the HDL-MS emulsion. Microstructural observations corroborated these findings, showing a more uniform distribution of droplet sizes in the HDL-MS emulsion with smaller particle sizes. Overall, these determinations suggested that the addition of HDL enhanced the emulsification behavior of MS emulsions, and the composite emulsions demonstrated heightened responsiveness under alkaline conditions. This establishes a theoretical basis for the practical utilization of HDL in emulsified meat products., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Actin, which plays a crucial role in cellular structure and function, interacts with various binding proteins, notably myosin. In mammals, actin is composed of six isoforms that exhibit high levels of sequence conservation and structural similarity overall. As a result, the selection of actin isoforms was considered unimportant in structural studies of their binding with myosin. However, recent high-resolution structural research discovered subtle structural differences in the N-terminus of actin isoforms, suggesting the possibility that each actin isoform may engage in specific interactions with myosin isoforms. In this study, we aimed to explore this possibility, particularly by understanding the influence of different actin isoforms on the interaction with myosin 7A. First, we compared the reported actomyosin structures utilizing the same type of actin isoforms as the high-resolution filamentous skeletal α-actin (3.5 Å) structure elucidated using cryo-EM. Through this comparison, we confirmed that the diversity of myosin isoforms leads to differences in interaction with the actin N-terminus, and that loop 2 of the myosin actin-binding sites directly interacts with the actin N-terminus. Subsequently, with the aid of multiple sequence alignment, we observed significant variations in the length of loop 2 across different myosin isoforms. We predicted that these length differences in loop 2 would likely result in structural variations that would affect the interaction with the actin N-terminus. For myosin 7A, loop 2 was found to be very short, and protein complex predictions using skeletal α-actin confirmed an interaction between loop 2 and the actin N-terminus. The prediction indicated that the positively charged residues present in loop 2 electrostatically interact with the acidic patch residues D24 and D25 of actin subdomain 1, whereas interaction with the actin N-terminus beyond this was not observed. Additionally, analyses of the actomyosin-7A prediction models generated using various actin isoforms consistently yielded the same results regardless of the type of actin isoform employed. The results of this study suggest that the subtle structural differences in the N-terminus of actin isoforms are unlikely to influence the binding structure with short loop 2 myosin 7A. Our findings are expected to provide a deeper understanding for future high-resolution structural binding studies of actin and myosin.

The Davydov model was conjectured to describe how an amide I excitation created during ATP hydrolysis in myosin might be significant in providing energy to drive myosin's chemomechanical cycle. The free energy surfaces of the myosin relay helix peptide dissolved in 2,2,2-trifluoroethanol (TFE), determined by metadynamics simulations, demonstrate local minima differing in free energy by only ~2 kT, corresponding to broken and stabilized hydrogen bonds, respectively. Experimental pump-probe and 2D infrared spectroscopy were performed on the peptide dissolved in TFE. The relative heights of two peaks seen in the pump-probe data and the corresponding relative volumes of diagonal peaks seen in the 2D-IR spectra at time delays between 0.5 ps and 1 ps differ noticeably from what is seen at earlier or later time delays or in the linear spectrum, indicating that a vibrational excitation may influence the conformational state of this helix. Thus, it is possible that the presence of an amide I excitation may be a direct factor in the conformational state taken on by the myosin relay helix following ATP hydrolysis in myosin.

A simple but robust strategy of ball milling (20 Hz, 30 Hz for 30 s, 60 s, 120 s, 180 s) was utilized to modify bamboo shoots fiber (BSDF) in shrimp surimi. The water holding capacity, swelling capacity, and oil binding capacity of 30 Hz-60 s milled BSDF exhibited the highest values of 5.61 g/g, 3.13 mL/g, and 6.93 g/g, significantly higher (P < 0.05) than untreated one (3.65 g/g, 2.03 mL/g, 4.57 g/g). Ball-milled BSDF exhibited a small-sized structure with the relative crystallinity decreased from 40.44 % (control) to 11.12 % (30 Hz-180 s). The myosin thermal stability, gelation properties of surimi were significantly enhanced by incorporating 20 Hz-120 s and 30 Hz-60 s BSDF via promoting protein unfolding, covalent hydrophobic interactions, and hydrogen bonding. A matrix-reinforcing and water entrapping effect was observed, exhibiting reinforced networks with down-sized water tunnels. However, BSDF modified at 180 s contributed to over-aggregated networks with fractures and enlarged gaps. Appropriate ball-milled BSDF (20 Hz-120 s, and 30 Hz-60 s) resulted in a significant decrease in α-helix (P < 0.05), accompanied by an increase of β-sheets and β-turn. This work could bring some insights into the applications of modified BSDF and its roles in the gelation of surimi-based food., Competing Interests: Declaration of competing interest The authors declare no conflicts of interest concerning this study., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Hypertrophic cardiomyopathy is one of the most common forms of genetic cardiomyopathy. Mavacamten is a first-in-class myosin modulator that was identified via activity screening on the wild type, and it is FDA-approved for the treatment of obstructive hypertrophic cardiomyopathy (HCM). The drug selectively binds to the cardiac β-myosin, inhibiting myosin function to decrease cardiac contractility. Though the drug is thought to affect multiple steps of the myosin cross-bridge cycle, its detailed mechanism of action is still under investigation. Individual steps in the overall cross-bridge cycle must be queried to elucidate the full mechanism of action. In this study, we utilize the rare-event method of transition path sampling to generate reactive trajectories to gain insights into the action of the drug on the dynamics and rate of the ATP hydrolysis step for human cardiac β-myosin. We study three known HCM causative myosin mutations: R453C, P710R, and R712L to observe the effect of the drug on the alterations caused by these mutations in the chemical step. Since the crystal structure of the drug-bound myosin was not available at the time of this work, we created a model of the drug-bound system utilizing a molecular docking approach. We find a significant effect of the drug in one case, where the actual mechanism of the reaction is altered from the wild type by mutation. The drug restores both the rate of hydrolysis to the wildtype level and the mechanism of the reaction. This is a way to check the effect of the drug on untested mutations.

This study investigated impact of high-density lipoprotein (HDL) on thermal aggregation and gelling behavior of myosin in relation to varied pHs. Results revealed that HDL modified myosin structure before and after heating, with distinct effects observed at varied pH. Under pH 5.0, both myosin and HDL-MS exhibited larger aggregates and altered microstructure; at pH 7.0 and 9.0, HDL inhibited myosin aggregation, resulting in enhanced solubility, reduced turbidity and particle size. Comparative analysis of surface hydrophobicity, free sulfhydryl groups and secondary structure highlighted distinct thermal aggregation behavior between MS and HDL-MS, with the latter showing inhibitory effects under neutral or alkaline conditions. Gelation behavior was enhanced at pH 7.0 with maximum strength, hardness, water-holding capacity and rheological properties. Under acidic pH, excessive protein aggregation resulted in increased whiteness and rough microstructure with granular aggregates. Under alkaline pH, gel network structure was weaker, possibly due to higher thermal stability of protein molecules. Scanning electron microscopy revealed expanded HDL protein particles at pH 7.0, accounting for decreased gel strength and altered rheological properties compared with myosin gel. Overall, the results indicated a positive role of HDL at varied pH in regulating thermal aggregation of myosin and further impacting heat-induced gel characteristics., Competing Interests: Declaration of competing interest The authors report there are no competing interests to declare., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Locust (Locusta migratoria) has a single striated muscle myosin heavy chain (Mhc) gene, which contains 5 clusters of alternative exclusive exons and 1 differently included penultimate exon. The alternative exons of Mhc gene encode 4 distinct regions in the myosin motor domain, that is, the N-terminal SH3-like domain, one lip of the nucleotide-binding pocket, the relay, and the converter. Here, we investigated the role of the alternative regions on the motor function of locust muscle myosin. Using Sf9-baculovirus protein expression system, we expressed and purified 5 isoforms of the locust muscle myosin heavy meromyosin (HMM), including the major isoform in the thorax dorsal longitudinal flight muscle (FL1) and 4 isoforms expressed in the abdominal intersegmental muscle (AB1 to AB4). Among these 5 HMMs, FL1-HMM displayed the highest level of actin-activated adenosine triphosphatase (ATPase) activity (hereafter referred as ATPase activity). To identify the alternative region(s) responsible for the elevated ATPase activity of FL1-HMM, we produced a number of chimeras of FL1-HMM and AB4-HMM. Substitution with the relay of AB4-HMM (encoded by exon-14c) substantially decreased the ATPase activity of FL1-HMM, and conversely, the relay of FL1-HMM (encoded by exon-14a) enhanced the ATPase activity of AB4-HMM. Mutagenesis showed that the exon-14a-encoded residues Gly 474 and Asn 509 are responsible for the elevated ATPase activity of FL1-HMM. Those results indicate that the alternative relay encoded by exon-14a/c play a key role in regulating the ATPase activity of FL1-HMM and AB4-HMM., (© 2023 Institute of Zoology, Chinese Academy of Sciences.)

Molecular motors employ chemical energy to generate unidirectional mechanical output against a track while navigating a chaotic cellular environment, potential disorder on the track, and against Brownian motion. Nevertheless, decades of nanometer-precise optical studies suggest that myosin-5a, one of the prototypical molecular motors, takes uniform steps spanning 13 subunits (36 nm) along its F-actin track. Here, we use high-resolution interferometric scattering microscopy to reveal that myosin takes strides spanning 22 to 34 actin subunits, despite walking straight along the helical actin filament. We show that cumulative angular disorder in F-actin accounts for the observed proportion of each stride length, akin to crossing a river on variably spaced stepping stones. Electron microscopy revealed the structure of the stepping molecule. Our results indicate that both motor and track are soft materials that can adapt to function in complex cellular conditions., Competing Interests: Competing interests statement:The authors declare no competing interest.

Cardiac muscle contraction occurs due to repetitive interactions between myosin thick and actin thin filaments (TF) regulated by Ca 2+ levels, active cross-bridges, and cardiac myosin-binding protein C (cMyBP-C). The cardiac TF (cTF) has two nonequivalent strands, each comprised of actin, tropomyosin (Tm), and troponin (Tn). Tn shifts Tm away from myosin-binding sites on actin at elevated Ca 2+ levels to allow formation of force-producing actomyosin cross-bridges. The Tn complex is comprised of three distinct polypeptides - Ca 2+ -binding TnC, inhibitory TnI, and Tm-binding TnT. The molecular mechanism of their collective action is unresolved due to lack of comprehensive structural information on Tn region of cTF. C1 domain of cMyBP-C activates cTF in the absence of Ca 2+ to the same extent as rigor myosin. Here we used cryo-EM of native cTFs to show that cTF Tn core adopts multiple structural conformations at high and low Ca 2+ levels and that the two strands are structurally distinct. At high Ca 2+ levels, cTF is not entirely activated by Ca 2+ but exists in either partially or fully activated state. Complete dissociation of TnI C-terminus is required for full activation. In presence of cMyBP-C C1 domain, Tn core adopts a fully activated conformation, even in absence of Ca 2+ . Our data provide a structural description for the requirement of myosin to fully activate cTFs and explain increased affinity of TnC to Ca 2+ in presence of active cross-bridges. We suggest that allosteric coupling between Tn subunits and Tm is required to control actomyosin interactions., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: J.R.P. provides consulting to Kate Therapeutics, but such work is unrelated to the content of this article. Other authors do not have any competing interests., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Enzymatic deamidation is a promising approach in enhancing the solubility of myofibrillar proteins (MPs) in water paving the way of tailor manufacturing muscle protein-based beverages. This work aimed to clarify the solubilization mechanism by deciphering myosin thick filaments assembly as affected by protein-glutaminase deamidation. With the extension of deamidation, filamentous structures in MPs shortened continuously. Dynamic monitoring of quartz crystal microbalance-dissipated showed the adsorption capacity of the deaminated MPs was reduced from 3.66 ng/cm 2 to 2.03 ng/cm 2 , indicating that the ability to assemble myosin thick filaments was significantly weakened. By simulating the surface charge, it was found that deamidation may neutralize the positive charged clusters distanced at 14-29 nm from rod C-terminus. Since this region confers myosin electrostatic property to initiate staggered dimerization, deamidation in this region, which severely affected the electrostatic balance between residues, impaired ordered thick filament growing and elongating, thus promoting the solubilization of MPs in water., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Filopodia are slender cellular protrusions containing parallel actin bundles involved in environmental sensing and signaling, cell adhesion and migration, and growth cone guidance and extension. Myosin 10 (Myo10), an unconventional actin-based motor protein, was reported to induce filopodial initiation with its motor domain. However, the roles of the multifunctional tail domain of Myo10 in filopodial formation and elongation remain elusive. Herein, we generated several constructs of Myo10-full-length Myo10, Myo10 with a truncated tail (Myo10 HMM), and Myo10 containing four mutations to disrupt its coiled-coil domain (Myo10 CC mutant). We found that the truncation of the tail domain decreased filopodial formation and filopodial length, while four mutations in the coiled-coil domain disrupted the motion of Myo10 toward filopodial tips and the elongation of filopodia. Furthermore, we found that filopodia elongated through multiple elongation cycles, which was supported by the Myo10 tail. These findings suggest that Myo10 tail is crucial for promoting long filopodia., Competing Interests: Conflict of interest The authors declare that they have no conflicts of interest with the contents of this article., (Copyright © 2023 The Authors. Published by Elsevier Inc. All rights reserved.)

This study investigated the impact of low-voltage electrostatic field-assisted freezing on the water-holding capacity of beef steaks. The enhances mechanism of water-holding capacity by electrostatic field was elucidated through the detection of dynamic changes in the myofilament lattice and the construction of an in vitro myosin filaments model. The findings demonstrated that the disorder of the myofilament array, resulted from the aggregation of myosin filaments during freezing, is a crucial factor responsible for the water loss. The intervention of the electrostatic field can effectively reduce the myofibril density by 18.7%, while maintaining a regular lattice array by modulating electrostatic and hydrophobic interactions between myofibrils. Moreover, the electrostatic field significantly inhibited the migration of immobilized water to free water, thus resulting in an increase in the water-holding capacity of myofibrils by 36%. This work provides insights into the underlying mechanisms of water loss in frozen steaks and its regulation., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Background: Myosin plays a crucial role in cellular processes, while its dysfunction can lead to organismal malfunction. Phenamacril (PHA), a highly species-specific and non-competitive inhibitor of myosin I (FgMyoI) from Fusarium graminearum, has been identified as an effective fungicide for controlling plant diseases caused by partial Fusarium pathogens, such as wheat scab and rice bakanae. However, the molecular basis of its action is still unclear., Results: This study used multiple computational approaches first to elucidate the allosteric inhibition mechanism of FgMyoI by PHA at the atomistic level. The results indicated the increase of adenosine triphosphate (ATP) binding affinity upon PHA binding, which might impede the release of hydrolysis products. Furthermore, simulations revealed a broadened outer cleft and a significantly more flexible interface for actin binding, accompanied by a decrease in signaling transduction from the catalytic center to the actin-binding interface. These various effects might work together to disrupt the actomyosin cycle and hinder the ability of motor to generate force. Our experimental results further confirmed that PHA reduces the enzymatic activity of myosin and its binding with actin., Conclusion: Therefore, our findings demonstrated that PHA might suppress the function of myosin through a synergistic mechanism, providing new insights into myosin allostery and offering new avenues for drug/fungicide discovery targeting myosin. © 2023 Society of Chemical Industry., (© 2023 Society of Chemical Industry.)

The structure of the thin, actin-containing filament of muscle is both highly conserved across a broad range of muscle types and is now well understood. The structure of the thick, myosin-containing filaments of striated muscle are quite variable and remained comparatively unknown until recently, particularly in the arrangement of the myosin tails. John Squire played a major role not only in our understanding of thin filament structure and function but also in the structure of the thick filaments. Long before much was known about the structure and composition of muscle thick filaments, he proposed a general model for how myosin filaments were constructed. His role in our current understanding the structure of striated muscle thick filaments and the extent through which his predictions have held true is the topic of this review., (© 2023. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Release of the ATP hydrolysis product ortophosphate (Pi) from the active site of myosin is central in chemo-mechanical energy transduction and closely associated with the main force-generating structural change, the power-stroke. Despite intense investigations, the relative timing between Pi-release and the power-stroke remains poorly understood. This hampers in depth understanding of force production by myosin in health and disease and our understanding of myosin-active drugs. Since the 1990s and up to today, models that incorporate the Pi-release either distinctly before or after the power-stroke, in unbranched kinetic schemes, have dominated the literature. However, in recent years, alternative models have emerged to explain apparently contradictory findings. Here, we first compare and critically analyze three influential alternative models proposed previously. These are either characterized by a branched kinetic scheme or by partial uncoupling of Pi-release and the power-stroke. Finally, we suggest critical tests of the models aiming for a unified picture., (© 2023 The Authors. BioEssays published by Wiley Periodicals LLC.)

Force production in muscle is achieved through the interaction of myosin and actin. Strong binding states in active muscle are associated with Mg·ADP bound to the active site; release of Mg·ADP allows rebinding of ATP and dissociation from actin. Thus, Mg·ADP binding is positioned for adaptation as a force sensor. Mechanical loads on the lever arm can affect the ability of myosin to release Mg·ADP but exactly how this is done is poorly defined. Here we use F-actin decorated with double-headed smooth muscle myosin fragments in the presence of Mg·ADP to visualize the effect of internally supplied tension on the paired lever arms using cryoEM. The interaction of the paired heads with two adjacent actin subunits is predicted to place one lever arm under positive and the other under negative strain. The converter domain is believed to be the most flexible domain within myosin head. Our results, instead, point to the segment of heavy chain between the essential and regulatory light chains as the location of the largest structural change. Moreover, our results suggest no large changes in the myosin coiled coil tail as the locus of strain relief when both heads bind F-actin. The method would be adaptable to double-headed members of the myosin family. We anticipate that the study of actin-myosin interaction using double-headed fragments enables visualization of domains that are typically noisy in decoration with single-headed fragments., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Background: It is reported that broilers with 'wooden breast' have poor processing properties, such as low binding and water-holding capacities. However, the reason for the poor functional characteristics has not been clarified. In this study, myosin was extracted from a wooden breast. Its physicochemical properties were investigated to clarify the relationship between the structure and physicochemical properties of the heating gel of myosin obtained from the wooden breast., Results: The turbidity of myosin solution extracted from wooden breast increased with increase in the heat treatment to a higher value than that from the normal breast meat myosin. The solubility of myosin collected from a wooden breast after heating decreased like normal breast muscle myosin. The surface hydrophobicity of myosin removed from wooden breast increased continually above 60 °C, unlike the change in surface hydrophobicity of normal breast myosin. The free thiol group of myosin extracted from the wooden breast was higher than normal breast myosin before and after heating. The apparent elasticity of heat-induced gels and chicken meat sausages was significantly lower in sausages and gel with wooden breast than normal ones (P < 0.05). The microstructure of the heated gel of normal myosin showed a fine network structure. In contrast, the heat-induced gel of wooden breast-extracted myosin showed a structure with loosely connected aggregates and many gaps., Conclusion: The coarseness of the internal gel structure of myosin extracted from wooden breast was shown to affect the apparent elasticity of the gel and sausages made from the chicken meat. © 2023 Society of Chemical Industry., (© 2023 Society of Chemical Industry.)

Muscle myosin is a non-processive molecular motor that generates mechanical work when cooperating in large ensembles. During its cyle, each individual motor keeps attaching and detaching from the actin filament. The random nature of attachment and detachment inevitably leads to losses and imposes theoretical limits on the energetic efficiency. Here, we numerically determine the theoretical efficiency limit of a classical myosin model with a given number of mechano-chemical states. All parameters that are not bounded by physical limits (like rate limiting steps) are determined by numerical efficiency optimization. We show that the efficiency is limited by the number of states, the stiffness and the rate-limiting kinetic steps. There is a trade-off between speed and efficiency. Slow motors are optimal when most of the available free energy is allocated to the working stroke and the stiffness of their elastic element is high. Fast motors, on the other hand, work better with a lower and asymmetric stiffness and allocate a larger fraction of free energy to the release of ADP. Overall, many features found in myosins coincide with the findings from the model optimization: there are at least 3 bound states, the largest part of the working stroke takes place during the first transition, the ADP affinity is adapted differently in slow and fast myosins and there is an asymmetry in elastic elements., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2023 Vilfan, Šarlah. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Polyphenols could inhibit the freezing-induced denaturation of myosin, and affect its nutritional and functional properties, which have rarely been studied to date. Therefore, the effects of interactions between polyphenols and myosin after freezing on myosin gel and digestive properties were investigated using low field NMR, a texture analyzer, a dynamic rheometer, ultraviolet-visible spectra, scanning electron microscopy, LC-MS/MS, an automatic amino acid analyzer, etc . Hesperetin (HE), dihydroquercetin (DI), salidroside (SA), and mangiferin (MA) increased the water-holding capacity, non-flowable water content, gel strength, texture, storage modulus, and fractal dimensions of the myosin gel, while modifying its leading force. The results of scanning electron microscopy revealed that the surfaces of polyphenol groups were relatively smoother than those of the control group. Meanwhile, the four types of polyphenols under study significantly improved the gastric and gastrointestinal digestibility of myosin. Furthermore, they significantly increased the contents of essential, flavor, and total free amino acids, as well as the unique peptide numbers in myosin digestion products. This work provides reliable guidance for polyphenols to improve protein function and nutritional properties.

The druggability of small-molecule binding sites can be significantly affected by protein motions and conformational changes. Ligand binding, protein dynamics and protein function have been shown to be closely interconnected in myosins. The breakthrough discovery of omecamtiv mecarbil (OM) has led to an increased interest in small molecules that can target myosin and modulate its function for therapeutic purposes (myosin modulators). In this work, we use a combination of computational methods, including steered molecular dynamics, umbrella sampling and binding pocket tracking tools, to follow the evolution of the OM binding site during the recovery stroke transition of human β-cardiac myosin. We found that steering two internal coordinates of the motor domain can recapture the main features of the transition and in particular the rearrangements of the binding site, which shows significant changes in size, shape and composition. Possible intermediate conformations were also identified, in remarkable agreement with experimental findings. The differences in the binding site properties observed along the transition can be exploited for the future development of conformation-selective myosin modulators., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2023 Akter et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Sarcomere length (SL) and its variation along the myofibril strongly regulate integrated coordinated myocyte contraction. It is therefore important to obtain individual SL properties. Optical imaging by confocal fluorescence (for example, using ANEPPS) or transmitted light microscopy is often used for this purpose. However, this allows for the visualization of structures related to Z-disks only. In contrast, second-harmonic generation (SHG) microscopy visualizes A-band sarcomeric structures directly. Here, we compared averaged SL and its variability in isolated relaxed rat cardiomyocytes by imaging with ANEPPS and SHG. We found that SL variability, evaluated by several absolute and relative measures, is two times smaller using SHG vs. ANEPPS, while both optical methods give the same average (median) SL. We conclude that optical methods with similar optical spatial resolution provide valid estimations of average SL, but the use of SHG microscopy for visualization of sarcomeric A-bands may be the "gold standard" for evaluation of SL variability due to the absence of optical interference between the sarcomere center and non-sarcomeric structures. This contrasts with sarcomere edges where t-tubules may not consistently colocalize to Z-disks. The use of SHG microscopy instead of fluorescent imaging can be a prospective tool to map sarcomere variability both in vitro and in vivo conditions and to reveal its role in the functional behavior of living myocardium., (© 2023 Lookin et al.)

Background: Myosin is the most important component of myofibrillar protein, with excellent gelling properties. To date, heating treatment remains the mainstream method for forming gel in meat products, and it has the most extensive application in the field of meat industry. However, at present, there are few reports on the effects of heating rates on myosin self-assembly and aggregation behavior during heating treatment., Results: The present study aimed to investigate the effects of different heating rates (1, 2, 3 and 5 °C min -1 ) on the self-assembly behavior, physicochemical, structural and gelling properties of myosin. At the lowest heating rate of 1 °C min -1 , the myosin gel had a dense microstructure, the highest elastic modulus (G') and water holding capacity compared to higher heating rates (2, 3 and 5 °C min -1 ). At higher temperatures (40, 45 °C), the surface hydrophobicity, turbidity, particle size distribution and self-assembly behavior of myosin in pre-gelling solutions showed that myosin had sufficient time to denature, underwent full structure unfolding before aggregation at the heating rate of 1°C min -1 , and formed regular and homogeneous spherical aggregates. Therefore, the myosin gel also had a better three-dimensional network., Conclusion: The heating rates had an important effect on the quality of myosin gels, and had theoretical implications for improving the quality of meat gel products. © 2023 Society of Chemical Industry., (© 2023 Society of Chemical Industry.)

This study aims to elucidate the dynamic binding characteristics between off-odors (hexanal, 1-octen-3-ol, nonanal) and myosin at cold storage (277 K) and oral temperatures (310 K) through spatial-temporal molecular dynamics (MD) simulation. Conformational analysis indicated that binding with off-odors could not significantly change the myosin secondary structure, and the myosin/(off-odors) structure became a stable and compact state in the later binding stages. Myosin head was the primary binding region with hydrophobic interactions as the dominant force rather than hydrogen bonds (average bond number 202.62 vs 55.20). Furthermore, the myosin/(off-odors) had larger binding energy at 310 than 277 K, and the myosin-nonanal showed the highest binding strength of 4050.93 kJ/mol at 310 K. The binding sites were observed to be concentrated in the 180-249, 350-410, 800-950 amino acid regions of myosin head, especially, Lys 185 , Tyr 347 , Leu 901 . These results provide accurate linkages between off-odors and myosin, laying a theoretical foundation for deodorization of fish products., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

This study aimed to investigate the influence of protein oxidation on the digestive properties of beef myofibrillar protein (MP). MP was treated with a hydroxyl radical-generating system containing various concentrations of H 2 O 2 . The increased content in a free sulfhydryl group and surface hydrophobicity indicated that oxidation treatment with 1 mM H 2 O 2 induced unfolding of MP. Reducing and nonreducing SDS-PAGE results suggested that 10 mM H 2 O 2 oxidation treatment resulted in aggregation of MP; meanwhile, the disulfide bond was the major covalent bond involved in aggregation. Peptidomics showed that peptides in the digestion products of MP were mainly derived from myosin tail. Moderate oxidation (1 mM H 2 O 2 ) facilitated the release of peptide in the rod portion (S2) of myosin, whereas excessive oxidation (10 mM H 2 O 2 ) inhibited peptide release in the light meromyosin region. This work presents insightful information for the crucial impact of oxidation on meat protein digestibility from the peptidomics perspective.

Muscle contraction is controlled at two levels: the thin and the thick filaments. The latter level of control involves three states of myosin heads: active, disordered relaxed (DRX), and super-relaxed (SRX), the distribution of which controls the number of myosins available to interact with actin. How these are controlled is still uncertain. Using fluorescently labeled ATP, we were able to spatially assign the activity of individual myosins within the sarcomere. We observed that SRX comprises 53% of all heads in the C-zone compared with 35% and 44% in the P- and D-zones, respectively. The recently FDA-approved hypertrophic cardiomyopathy drug, mavacamten (mava), significantly decreased DRX, favoring SRX in both the C- and D-zones at 60% and 63%, respectively. Since thick filament regulation is in part regulated by the myosin-binding protein-C (MyBP-C), we also studied PKA phosphorylation. This had the opposite effect as mava, specifically in the C-zone where it decreased SRX to 34%, favoring DRX. These results directly show that excess concentrations of mava do increase SRX, but the effect is limited across the sarcomere, suggesting mava is less effective on skeletal muscle. In addition, we show that PKA directly affects the contractile machinery of skeletal muscle leading to the liberation of repressed heads. Since the effect is focused on the C-zone, this suggests it is likely through MyBP-C phosphorylation, although our data suggest that a further reserve of myosins remain that are not accessible to PKA treatment., (© 2022 Pilagov et al.)

Under relaxing conditions, the two heads of myosin II interact with each other and with the proximal part (S2) of the myosin tail, establishing the interacting-heads motif (IHM), found in myosin molecules and thick filaments of muscle and nonmuscle cells. The IHM is normally thought of as a single, unique structure, but there are several variants. In the simplest ("canonical") IHM, occurring in most relaxed thick filaments and in heavy meromyosin, the interacting heads bend back and interact with S2, and the motif lies parallel to the filament surface. In one variant, occurring in insect indirect flight muscle, there is no S2-head interaction and the motif is perpendicular to the filament. In a second variant, found in smooth and nonmuscle single myosin molecules in their inhibited (10S) conformation, S2 is shifted ∼20 Å from the canonical form and the tail folds twice and wraps around the interacting heads. These molecule and filament IHM variants have important energetic and pathophysiological consequences. (1) The canonical motif, with S2-head interaction, correlates with the super-relaxed (SRX) state of myosin. The absence of S2-head interaction in insects may account for the lower stability of this IHM and apparent absence of SRX in indirect flight muscle, contributing to the quick initiation of flight in insects. (2) The ∼20 Å shift of S2 in 10S myosin molecules means that S2-head interactions are different from those in the canonical IHM. This variant therefore cannot be used to analyze the impact of myosin mutations on S2-head interactions that occur in filaments, as has been proposed. It can be used, instead, to analyze the structural impact of mutations in smooth and nonmuscle myosin., (© 2022 Padron et al.)

The architectural structure of cells is essential for the cells' function, which becomes especially apparent in the highly "structure functionally" tuned skeletal muscle cells. Here, structural changes in the microstructure can have a direct impact on performance parameters, such as isometric or tetanic force production. The microarchitecture of the actin-myosin lattice in muscle cells can be detected noninvasively in living cells and in 3D by using second harmonic generation (SHG) microscopy, forgoing the need to alter samples by introducing fluorescent probes into them. Here, we provide tools and step-by-step protocols to guide the processes of obtaining SHG microscopy image data from samples, as well as extracting characteristic values from the image data to quantify the cellular microarchitecture using characteristic patterns of myofibrillar lattice alignments., (© 2023. The Author(s), under exclusive license to Springer Science+Business Media, LLC, part of Springer Nature.)

Background: Several reports have indicated that ultrasonication can change the solubility of muscle proteins and improves the functional properties of meat and isolated muscle proteins. Moreover, available literature suggests that ultrasonication can significantly improve the gelling properties of muscle proteins., Objectives: The present study was carried out to investigate the effect of low-frequency ultrasonication on the secondary structure of myosin and the impact of these structural changes on solubility and gelling ability., Methods: Myosin from breast muscles (Pectoralis major) of broiler chicken was extracted and exposed to low-frequency ultrasonication for 30 min. Four aliquots collected at the interval of 5, 10, 20, and 30 min were analysed for change in ATPase activity, sulfhydryl content, surface hydrophobicity, alpha-helicity. The possible impact of these changes on heat-induced gelation was observed through electron micrographs., Results: Ultrasonication reduced the enzymatic activity of myosin and increased the reactive sulfhydryl content. Decreased α-helicity and increased intrinsic fluorescence displayed significant structural changes at the secondary and tertiary levels. Myosin aggregation, as indicated by electron micrographs, showed a marked decrease. The microstructure of myosin gels displayed a distinct correlation with ultrasonication-induced structural changes. Furthermore, improved microstructure led to a significant increase in the water retention capacity of myosin gels., Conclusion: In conclusion, ultrasonication of myosin caused a marked change in structure at the tertiary and secondary levels. Structural changes apparently confined within the globular head region and rod portion of myosin were displayed by reduced enzymatic activity and improved gelation/solubility. Results of our study convincingly showed that ultrasonication improved the microstructure of myosin gels resulting in increased WHC., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

The UCS (UNC-45/CRO1/She4p) family of proteins has emerged as chaperones specific for the folding, assembly, and function of myosin. UCS proteins participate in various myosin-dependent cellular processes including myofibril organization and muscle functions, cell differentiation, striated muscle development, cytokinesis, and endocytosis. Mutations in the genes that code for UCS proteins cause serious defects in myosin-dependent cellular processes. UCS proteins that contain an N-terminal tetratricopeptide repeat (TPR) domain are called UNC-45. Vertebrates usually possess two variants of UNC-45, the ubiquitous general-cell UNC-45 (UNC-45A) and the striated muscle UNC-45 (UNC-45B), which is exclusively expressed in skeletal and cardiac muscles. Except for the TPR domain in UNC-45, UCS proteins comprise of several irregular armadillo (ARM) repeats that are organized into a central domain, a neck region, and the canonical C-terminal UCS domain that functions as the chaperoning module. With or without TPR, UCS proteins form linear oligomers that serve as scaffolds that mediate myosin folding, organization into myofibrils, repair, and motility. This chapter reviews emerging functions of these proteins with a focus on UNC-45 as a dedicated chaperone for folding, assembly, and function of myosin at protein and potentially gene levels. Recent experimental evidences strongly support UNC-45 as an absolute regulator of myosin, with each domain of the chaperone playing different but complementary roles during the folding, assembly, and function of myosin, as well as recruiting Hsp90 as a co-chaperone to optimize key steps. It is becoming increasingly clear that UNC-45 also regulates the transcription of several genes involved in myosin-dependent cellular processes., (© 2023. The Author(s), under exclusive license to Springer Nature Switzerland AG.)

Biological motors function at the interface of biology, physics, and chemistry, and it remains unsettled what rules from which disciplines account for how these motors work. Myosin motors are enzymes that catalyze the hydrolysis of ATP through a mechanism involving a switch-like myosin structural change (a lever arm rotation) induced by actin binding that generates a small displacement of an actin filament. In muscle, individual myosin motors are widely assumed to function as molecular machines having mechanical properties that resemble those of muscle. In a fundamental departure from this perspective, here, I show that muscle more closely resembles a heat engine with mechanical properties that emerge from the thermodynamics of a myosin motor ensemble. The transformative impact of thermodynamics on our understanding of how a heat engine works guides a parallel transformation in our understanding of how muscle works. I consider the simplest possible model of force generation: a binary mechanical system. I develop the mechanics, energetics, and kinetics of this system and show that a single binding reaction generates force when muscle is held at a fixed length and performs work when muscle is allowed to shorten. This creates a network of thermodynamic binding pathways that resembles many of the characteristic mechanical and energetic behaviors of muscle including the muscle force-velocity relationship, heat output by shortening muscle, four phases of a muscle tension transient, spontaneous oscillatory contractions, and force redevelopment. Analogous to the thermodynamic (Carnot) cycle for a heat engine, isothermal and adiabatic binding and detachment reactions create a thermodynamic cycle for muscle that resembles cardiac pressure-volume loops (i.e., how the heart works). This paper provides an outline for how to re-interpret muscle mechanic data using thermodynamics - an ongoing effort that will continue providing novel insights into how muscle and molecular motors work.

Pollen tubes display polarized tip-growth and are a model to study the coordination of vesicular trafficking and cytoskeletal control. The molecular details of how dynamic actin filaments associate with the plasma membrane are currently unclear. In Arabidopsis thaliana, plasma membrane attachment of actin filaments may be mediated by four myosins representing the plant-specific myosin-subclass VIII, which localize to the plasma membrane and display only minor motor-activity. Here we explore the mode of membrane attachment of the pollen-expressed class VIII-myosins ATM2 and VIII-B through interaction with anionic membrane phospholipids. A fluorescent mCherry-ATM2-fusion decorated plasma membrane-peripheral actin filaments when expressed in tobacco pollen tubes, consistent with a role of class VIII-myosins at the membrane-cytoskeleton interface. As recombinant proteins, class VIII-myosins are prone to aggregation and to proteolysis, creating a challenge for their biochemical characterization. We describe a purification scheme for guanidinium chloride (GdmCl)-denatured recombinant proteins, followed by a renaturation protocol to obtain pure, soluble protein fragments of ATM2 and VIII-B. The fragments represent the C-terminal tail and coiled-coil-regions and lack the N-terminal actin-binding regions, IQ or motor domains. Based on lipid-overlays and liposome-sedimentation assays, the fragments of ATM2 and VIII-B bind anionic phospholipids. Small polybasic regions at the extreme C-termini were sufficient for lipid-binding of the respective protein fragments. When expressed in tobacco pollen tubes, a fluorescence-tagged variant of ATM2 lacking its lipid-binding region displayed substantially reduced plasma membrane association. The data indicate that class VIII-myosins may facilitate actin-plasma membrane attachment through interaction with anionic phospholipids, mediated by polybasic C-terminal lipid-binding domains., Competing Interests: Declaration of competing interest The authors declare no competing interests., (Copyright © 2022 The Author(s). Published by Elsevier B.V. All rights reserved.)

Filamentous myosin is a self-assembling polymer that prevents myofibrillar proteins (MPs) from functioning in low ionic strength media. This study was aimed at investigating if glycation has the potential to improve the solubility of MPs in water. MPs were conjugated with monosaccharides, oligosaccharides, and polysaccharides under wet reaction conditions at 37 °C. The conjugation was verified by SDS-PAGE, FT-IR and amino acid analyses. MPs conjugated with dextran (DX) exhibited a higher solubility and dispersion stability in water, which corresponded to smaller particle size and more uniform distribution (P < 0.05). According to secondary and tertiary structure analyses, the loss of α-helix structures and unfolding of the MPs appear to be the main reasons for MP solubilization. Additionally, according to the zeta-potential, confocal laser scanning microscopy, and atomic force microscopy observation results, glycation can provide electrostatic repulsion or steric hindrance to disintegrate existing filamentous myosin aggregates and inhibit further self-assembly behavior., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Myosin and myosin-binding protein C are exquisitely organized into giant filamentous macromolecular complexes within cardiac muscle sarcomeres, yet these proteins must be continually replaced to maintain contractile fidelity. The overall hypothesis that myosin filament structure is dynamic and allows for the stochastic replacement of individual components was tested in vivo, using a combination of mass spectrometry- and fluorescence-based proteomic techniques. Adult mice were fed a diet that marked all newly synthesized proteins with a stable isotope-labeled amino acid. The abundance of unlabeled and labeled proteins was quantified by high-resolution mass spectrometry over an 8-week period. The rates of change in the abundance of these proteins were well described by analytical models in which protein synthesis defined stoichiometry and protein degradation was governed by the stochastic selection of individual molecules. To test whether the whole myosin filaments or the individual components were selected for replacement, cardiac muscle was chemically skinned to remove the cellular membrane and myosin filaments were solubilized with ionic solutions. The composition of the filamentous and soluble fractions was quantified by mass spectrometry, and filament depolymerization was visualized by real-time fluorescence microscopy. Myosin molecules were preferentially extracted from ends of the filaments in the presence of the ionic solutions, and there was only a slight bias in the abundance of unlabeled molecules toward the innermost region on the myosin filaments. These data demonstrate for the first time that the newly synthesized myosin and myosin-binding protein C molecules are randomly mixed into preexisting thick filaments in vivo and the rate of mixing may not be equivalent along the length of the thick filament. These data collectively support a new model of cardiac myosin filament structure, with the filaments being dynamic macromolecular assemblies that allow for replacement of their components, rather than rigid bodies., Competing Interests: Conflict of interest The authors declare that they have no conflicts of interest with the contents of this article., (Copyright © 2022 The Authors. Published by Elsevier Inc. All rights reserved.)

In 1964 Michael Bárány and colleagues published a paper ((M. Bárány, E. Gaetjens, K. Bárány, Karp E. Arch Biochem Biophys 106(1964)280-93. http://10.1016/0003-9861(64)90,189-4)) that has been one of the most cited papers in Archives of Biochemistry and Biophysics. This was followed in 1967 by another most cited paper (M. Bárány. J Gen Physiol 50(1967)197-218. https://doi.org/10.1085/jgp.50.6.197). I have commemorated these achievements as tipping points in the understanding of myosin motors in muscle function. Tipping points are generally defined as a temporal point in which a series of progressive advances (in this case the understanding of the relations between myosin ATP hydrolysis and muscle function) inspire more expansive, wide-ranging, significant changes. I first concisely summarize the background against which the papers came to publication as well as the unimaginable personal challenges faced by Michael and Kate Bárány. A final section summarizes the impact of these publications as key steps in the progression of contemporary understanding of diverse control of myosin ATPase activity with focus on the thick filaments in cardiac homeostasis, disorders, and as targets for therapeutic applications in translational investigations., (Copyright © 2022 Elsevier Inc. All rights reserved.)

The poor water solubility of myofibrillar proteins (MPs) limits their application in food industry, and is directly related to the molecular behavior associated with myosin assembly into filaments. This study aims to explore the effect of high-intensity ultrasound (HIU) combined with nonenzymatic glycation on the solubility, structural characteristics, and filament-forming behavior of MPs in low ionic strength media. The results showed that the HIU (200-400 W) application could promote the subsequent glycation reaction between MPs and dextran (DX) and interfere with the electrostatic balance between myosin rods, suppressing the formation of filamentous myosin polymers. Glycated MPs pretreated by 400 W HIU had the highest solubility, which corresponded to the smallest particle size, highest zeta potential, and optimum storage stability (P < 0.05). Structure analysis and microscopic morphology observations suggested that the loss of the MP superhelix and the depolymerization of filamentous polymers were the main mechanisms for MP solubilization. In conclusion, HIU combined with glycation can effectively improve the water solubility of MPs by destroying or suppressing the assembly of myosin molecules., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 The Author(s). Published by Elsevier B.V. All rights reserved.)

Myosins are a superfamily of ATP-driven actin-dependent molecular motors that are responsible for diverse functions from muscle contraction to cell division. The resolution revolution in cryo-EM has enabled characterisation of the interaction of myosin with its actin track in several states of the myosin motor cycle, for multiple myosin classes, allowing increased insight into the force generation mechanism. A major advancement in our understanding of myosin-2 regulation has come through solving structures of its shutdown state, dysregulation of which is implicated in multiple diseases. This review will discuss what has been accomplished so far with cryoEM, what is still yet to do, but within reach, and how better understanding of myosin structure-function relationships may lead to future therapeutic interventions., Competing Interests: Conflict of interest statement Nothing declared., (Copyright © 2022 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

The mechanochemical coupling and biological function of myosin motors are regulated by Ca 2+ concentrations. As one of the regulation pathways, Ca 2+ binding induces a conformational change of the light chain calmodulin and its binding modes with a myosin lever arm, which can affect the stiffness of the lever arm and force transmission. However, the underlying molecular mechanism of the Ca 2+ regulated stiffness change is not fully understood. Here, we study the effect of Ca 2+ binding on the conformational dynamics and stiffness of the myosin VIIa lever arm bound with a calmodulin by performing molecular dynamics simulations and dynamic correlation network analysis. The results showed that the calmodulin bound lever arm at an apo state can sample three different conformations. In addition to the conformation observed in a crystal structure, a calmodulin bound lever arm at the apo condition can also adopt other two conformations featured by different extents of small-angle bending of the lever arm. However, large-angle bending is strongly prohibited. Such results suggest that the calmodulin bound lever arm without Ca 2+ binding is plastic for small-angle deformation but shows high stiffness for large-angle deformation. In comparison, after the binding of Ca 2+ , although the calmodulin bound lever arm is locally more rigid, it can adopt largely deformed or even unfolded conformations, which may render the lever arm incompetent for force transmission. The conformational plasticity of the lever arm for small-angle deformation at the apo condition may be used as a force buffer to prevent the lever arm from unfolding during the power stroke action of the motor domain.

The properties, structure and water holding capacity of myosin were analyzed after incubated with myoglobin (Mb) hemin prosthetic group. The results revealed moderate oxidation of hemin prosthetic group could improve the solubility of myosin. Besides, it could stretch the protein structure and cross-link the molecules to form the soluble polymer. Hence, moderate oxidation could improve the gel properties and the gel network structure. However, excessive oxidation would greatly reduce the physical and chemical properties of myosin, which was not conducive to the gel formation and would lead to a decrease in water retention. Moreover, fluorescence spectroscopy and cyclic voltammetry (CV) proved hemin prosthetic group had a high affinity for myosin. The interaction mechanism was further studied by molecular docking and molecular dynamics (MD) simulations. This study provides some fundamental prospects to be applied in the functional regulation of meat protein., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Myosin filament plays a critical role in water-trapping and thermodynamic regulation during processing of brined muscle foods. The redox state and availability of proteolytic/antioxidant enzymes affected by salt may change the ion-binding capacity of myosin consequently contributing to swelling and rehydration. Thus, this study investigated the impact of different salt content (0%, 1%, 2%, 3%, 4%, 5% NaCl) and oxidation in vitro (10 mM H 2 O 2 /ascorbate-based hydroxyl radical (OH)-generating system) on the oxidative stability, solubility/dispersion capacity, chymotrypsin digestibility, aggregation site and the microrheological properties of isolated porcine myosin. The result showed that, brining at 2% salt exposed more sulfhydryl groups and inhibited the formation of disulfide bond, whereby smaller dispersed structure (diameter within 10-50 nm) and higher Ca 2+ -ATPase activity of the denatured myosin were observed. Accordingly, gel electrophoresis showed that myosin S1 and HMM subunits were highly oxidized and susceptible to reversible assembles. Despite enhanced hydrophobic interactions between swelled myosin at 3% salt content, ≥4% salt greatly promoted the exposure/polarization of tryptophan and cross-linking structures, mainly occurring at myosin S2 portion. The results of micro-rheology proved that oxidized myosin formed a tighter heat-set network following rehydration at high ion strength (≥4% salt), suggesting an increased inter-droplet resistance and macroscopic viscosity. This work is expected to give some useful insights into improved texture and functionality of engineered muscle foods., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

The stability of a protein, as well as its function and versatility, can be enhanced through oligomerization. KITENIN (KAI1 C-terminal interacting tetraspanin) is known to promote the malignant progression of colorectal cancer (CRC). How KITENIN maintains its structural integrity and stability are largely unknown, however. Here we investigated the mechanisms regulating the stability of KITENIN with the aim of developing therapeutics blocking its oncogenic functions. We found that KITENIN formed a homo-oligomeric complex and that the intracellular C-terminal domain (KITENIN-CTD) was needed for this oligomerization. Expression of the KITENIN-CTD alone interfered with the formation of the KITENIN homodimer, and the amino acid sequence from 463 to 471 within the KITENIN-CTD was the most effective. This sequence coupled with a cell-penetrating peptide was named a KITENIN dimerization-interfering peptide (KDIP). We next studied the mechanisms by which KDIP affected the stability of KITENIN. The KITENIN-interacting protein myosin-X (Myo10), which has oncogenic activity in several cancers, functioned as an effector to stabilize the KITENIN homodimer in the cis formation. Treatment with KDIP resulted in the disintegration of the homodimer via downregulation of Myo10, which led to increased binding of RACK1 to the exposed RACK1-interacting motif (463-471 aa), and subsequent autophagy-dependent degradation of KITENIN and reduced CRC cell invasion. Intravenous injection of KDIP significantly reduced the tumour burden in a syngeneic mouse tumour model and colorectal liver metastasis in an intrasplenic hepatic metastasis model. Collectively, our present results provide a new cancer therapeutic peptide for blocking colorectal liver metastasis, which acts by inducing the downregulation of Myo10 and specifically targeting the stability of the oncogenic KITENIN protein., (© 2022 The Authors. Clinical and Translational Medicine published by John Wiley & Sons Australia, Ltd on behalf of Shanghai Institute of Clinical Bioinformatics.)

The development of myofibrillar proteins drinks (MPDs) can provide meat protein nutrition to specific groups of people. However, one major challenge is that myofibrillar proteins (MPs) are insoluble in solutions with a low ionic strength. Another functional constraint is the susceptibility of MPs to heat-induced aggregation. Currently, the primary approach used to improve the water solubility of MPs is to inhibit the assembly of myofilaments. Increasing the thermostability of MPs primarily inhibits the aggregation of myosin or oxidizes myosin to soluble substances. This review focuses on the description of several chemical and physical strategies, with an emphasis on the advantages, disadvantages, and recent progress. Under the myosin filament assembly process and the cross-linking aggregation mechanism, this summary helps improve our understanding of the solution and thermostability of MPs in low-ionic-strength solutions, thus providing new ideas to the development of MPDs., (Copyright © 2022 Elsevier Ltd. All rights reserved.)