Search

Bioactive dimeric (pre‐)anthraquinones are ubiquitous in nature and are found in bacteria, fungi, insects, and plants. Their biosynthesis via oxidative phenol coupling (OPC) is catalyzed by cytochrome P450 enzymes, peroxidases, or laccases. While the biocatalysis of OPC in molds (Ascomycota) is well‐known, the respective enzymes in mushroom‐forming fungi (Basidiomycota) are unknown. Here, we report on the biosynthesis of the atropisomers phlegmacin A1 and B1 of the mushroom Cortinarius odorifer. The biosynthesis of these unsymmetrically 7,10'‐homo‐coupled dihydroanthracenones was heterologously reconstituted in the mold Aspergillus niger. Methylation of the parental monomer atrochrysone to its 6‐O‐methyl ether torosachrysone by the O‐methyltransferase CoOMT1 precedes the regioselective homocoupling to phlegmacin, catalyzed by the enzyme CoUPO1 annotated as an "unspecific peroxygenase" (UPO). Our results reveal an unprecedented UPO reaction, thereby expanding the biocatalytic portfolio of oxidative phenol coupling beyond the commonly reported enzymes. The results show that Basidiomycota use peroxygenases to selectively couple aryls independently of and convergently to any other group of organisms, emphasizing the central role of OPC in natural processes. [ABSTRACT FROM AUTHOR]

Aspergillus flavus is one of the main contaminating mold species in most feed products, significantly impacting human and animal health. This study aims to isolate the epiphytic yeasts from the fruit Flacourtia inermis Roxb and test their potential ability to act as biocontrol agents for A. flavus. The antagonistic test was performed using a dual culture method, and the potential yeast isolates were then identified using a combination of morphology characterization and molecular sequence analysis. From 42 yeast isolated from F. inermis fruit, 2 yeast isolates (LCA 75 and LCA 102) demonstrated the highest inhibition growth against A. flavus (32.32 and 32.30 %, respectively). The isolates LCA 75 and LCA 102 were identified as Candida chrysomelidarum and Rhodotorula toruloides, respectively. Rhodotorula toruloides, identified as one of the yeast isolates (LCA 102), is an unconventional red yeast demonstrating notable antagonistic effects against A. flavus, inhibiting its growth by 32.30 %. This yeast, also known as Rhodosporidium toruloides, R. rubescens, R. glutinis, or R. gracilis, belongs to the subphylum Pucciniomycotina within the division Basidiomycota. The significant inhibition of mycelium growth and sporulation observed in our study highlights the potential of R. toruloides, along with C. chrysomelidarum (LCA 75), as effective biocontrol agents to reduce mycotoxin contamination in chicken feed by A. flavus. This study represents a significant advancement in the management of A. flavus contamination in animal feed. The findings not only underscore the viability of yeast-based biocontrol strategies but also contribute to a safer, more sustainable approach to preventing mycotoxin proliferation in feedstocks. [ABSTRACT FROM AUTHOR]

Secondary metabolic products of molds, called mycotoxins, negatively affect animal health and production. They constitute a significant problem in veterinary and medical sciences, and their presence has been confirmed in feed all over the world. Applying appropriate agricultural practices and ensuring proper storage conditions significantly reduces the contamination of agricultural products with mycotoxins. However, this does not guarantee that raw materials are completely free from contamination. Many detoxification methods are currently used, but their insufficient effectiveness and negative impact on the quality of the raw material subjected to them significantly limits their usefulness. The positive results of eliminating mycotoxins from many products have been proven by the specific properties of microorganisms (bacteria, yeast, and fungi) and the enzymes they produce. Biological detoxification methods seem to offer the most promising opportunities to solve the problem of the presence of mycotoxins in animal food. This work, based on literature data, presents the health risks to farm animals consuming mycotoxins with feed and discusses the biological methods of their purification. [ABSTRACT FROM AUTHOR]

Bioaerosols adversely affect human health posing risk to users of public facilities in Korea. Between October 2021 and May 2022, airborne bacteria and mold were measured in 1,243 public-use facilities across 23 categories. A systematic review and meta-analysis were performed on these and other studies from June 2004 to May 2021, and the non-carcinogenic risks to humans were assessed using Monte Carlo simulations. For bacteria, the maximum 95th percentile concentration was 584.4 cfu/m3 and 1384.8 cfu/m3 for mold. The heterogeneity statistic I2 was over 50% in all facilities, and for subway station bacteria, there was a significant difference according to the measurement method. The 95th percentile of hazard by population group was 8.83 × 10–2 to 3.42 × 10–1 for bacteria, and 1.31 × 10–1 to 3.55 × 10–1 for mold. The probability of a hazard quotient exceeding 1 for some population groups was derived from exposure to bacteria and mold in the air resulting from the use of all public facilities. The most powerful explanatory factor for risk was exposure time to the facility, both within (up to 0.922 for bacteria and up to 0.960 for mold) and between populations (up to 0.543 for bacteria and 0.483 for mold). This study identified populations at risk of bioaerosol exposure in Korean public-use facilities and estimated the influencing factors, highlighting the need for comprehensive improvement in bioaerosol control in public-use facilities. [ABSTRACT FROM AUTHOR]

It has been established that the variation in the conductance of insulation made with materials of various chemical nature and physical structure (polyvinyl chloride plastic compound and varnished cambric) with a short-term exposure to a mold fungus has an S-shaped character. The unambiguous correlation of the induction period, the stage of rapid increase and the time to reach the quasi-stationary level of conductance with the induction period, the stage of rapid growth, the time to reach the maximum amount of biomass on the surface of the material is due to the sorption by isolation of the metabolic products of the mold fungus. The variation in conductance at short times of exposure to microorganisms (~ 1 month) is reversible. Removal of microorganisms from the surface leads to a decrease in conductance to its original level. With their longer exposure (~ 1 year), the change in conductance may become irreversible as a result of the biochemical decomposition of insulation components, in particular, dialkyl phthalates - polyvinyl chloride plasticizers. Features of the processes of changes in conductance are due to the duration of the growth of microorganisms, the nature of materials and their components. The growth of microorganisms depends primarily on temperature and humidity conditions. For materials with high water absorption (varnished cambric), the most important external factor is temperature, and for materials with low water absorption (polyvinyl chloride) – relative humidity. [ABSTRACT FROM AUTHOR]

Fungal contamination poses a serious threat to public health and food safety because molds can grow under stressful conditions through melanin accumulation. Although ultraviolet (UV) irradiation is popular for inhibiting microorganisms, its effectiveness is limited by our insufficient knowledge about UV tolerance in melanin-accumulating molds. In this study, we first confirmed the protective effect of melanin by evaluating the UV sensitivity of young and mature spores. Additionally, we compared UV sensitivity between spores with accumulated melanin and spores prepared with melanin biosynthesis inhibitors. We found that mature spores were less UV-sensitive than young spores, and that reduced melanin accumulation by inhibitors led to reduced UV sensitivity. These results suggest that melanin protects cells against UV irradiation. To determine the most effective wavelength for inhibition, we evaluated the wavelength dependence of UV tolerance in a yeast (Rhodotorula mucilaginosa) and in molds (Aspergillus fumigatus, Cladosporium halotolerans, Cladosporium sphaerospermum, Aspergillus brasiliensis, Penicillium roqueforti, and Botrytis cinerea). We assessed UV tolerance using a UV-light emitting diode (LED) irradiation system with 13 wavelength-ranked LEDs between 250 and 365 nm, a krypton chlorine (KrCl) excimer lamp device, and a low pressure (LP) Hg lamp device. The inhibition of fungi peaked at around 270 nm, and most molds showed reduced UV sensitivity at shorter wavelengths as they accumulated pigment. Absorption spectra of the pigments showed greater absorption at shorter wavelengths, suggesting greater UV protection at these wavelengths. These results will assist in the development of fungal disinfection systems using UV, such as closed systems of air and water purification. [ABSTRACT FROM AUTHOR]

Objective/Background: Taxodium distichum (L.) Rich., a plant of the Cupressaceae family, is known for its leaves and cones rich in essential oils, which are traditionally used in folk medicine. This study employed hydrodistillation to extract essential oils from three parts of T. distichum, namely its leaves, twigs, and cones, and evaluated the yield and composition of these oils as well as their anti-mildew property on paper. Methods: The chemical compositions of the essential oils from the three parts were analyzed using gas chromatography with flame ionization detection (GC-FID) and gas chromatography mass spectrometry (GC-MS). The anti-mildew properties were assessed on paper against seven mold fungi, namely Aspergillus clavatus, A. niger, Chaetomium globosum, Cladosporium cladosporioides, Myrothecium verrucaria, Penicillium citrinum, and Trichoderma viride, following standards such as TAPPI T487 cm-93 and CNS 2690. Furthermore, the essential oil demonstrating the strongest anti-mildew properties was selected from the oils extracted from three different parts, underwent column chromatography for isolation, and the main active compounds were identified. Results: Among the three parts, cones had the highest essential oil yield (0.53 ± 0.03 mL/100 g), followed by leaves (0.46 ± 0.02 mL/100 g) and twigs (0.06 ± 0.01 mL/100 g). The main components were limonene (39.8%) and α-pinene (37.1%) in leaves; limonene (16.8%), α-pinene (15.8%), and ferruginol (11.0%) in twigs; and ferruginol (43.2%) and caryophyllene oxide (12.5%) in cones. The cone oils exhibited the most effective anti-mildew properties on paper. Furthermore, the cone oils were fractionated into six fractions (CO1–CO6), with the CO4 fraction exhibiting the best activity. CO4's main components were ferruginol, caryophyllene oxide, and β-caryophyllene. Ferruginol showed the best anti-mildew performance, with 100% inhibition at 200 μg/cm² for all strains. Conclusion: The study results indicated that essential oils from the cones of T. distichum and ferruginol exhibit promising anti-mildew effects on paper. Therefore, further research and development are highly warranted for their application in inhibiting fungal growth on paper. [ABSTRACT FROM AUTHOR]

Spoilage fungi are a significant cause of financial loss in the food and beverage industry each year. These fungi thrive in challenging environments characterized by low acidity, low water activity and high sugar content, all of which are common in fruit fillings used in pastry products. Fruit fillings are therefore highly susceptible to fungal spoilage. Fungal growth can cause sensory defects in foods, such as changes in appearance, odor, flavor or texture, and can pose health risks due to the production of mycotoxins by certain mold species. To reduce food loss and waste and extend product shelf-life, it is critical that we prevent fungal spoilage. Synthetic chemicals such as sorbic acid and potassium sorbate are commonly used as preservatives to prevent fungal spoilage. However, with consumer demand for 'natural' and 'chemical-free' foods, research into clean-label preservative alternatives to replace chemical preservatives has increased. The objectives of this review are (i) to provide an overview of the sources of fungal contamination in fruit filling production systems, from pre-harvest of raw materials to storage of the final product, and to identify key control factors; and (ii) to discuss preservation techniques (both conventional and novel) that can prevent fungal growth and extend the shelf-life of fruit fillings. [ABSTRACT FROM AUTHOR]

Copyright of Nachrichten aus der Chemie is the property of Wiley-Blackwell and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Mold growth on body donations remains an underreported yet serious issue in anatomical teaching. Bacterial and fungal growth pose health risks to lecturers and students, alongside with ethical and aesthetic concerns. However, limited information exists on the presence of bacteria and fungi on body donations and their underlying causes. To investigate the potential impact of airborne germs on body donation contamination, we conducted indoor air measurements before, during, and after our anatomical dissection course, with outdoor measurements serving as a control. Tissue samples from the dissected body donations were collected to assess the germ load, with qualitative and quantitative microbiological analyses. Air samples from the dissection hall contained no fungi, but various fungal species were identified in the adjacent stairways and outdoors which implies that fungal occurrence in the dissection hall air was independent of lecturers' and students' presence. Moreover, our results indicate that adequate ventilation filters can effectively reduce indoor fungal germs during courses, while the bacterial load in room air appears to increase, likely due to the presence of lecturers and students. Additionally, the tissue samples revealed no bacterial or fungal germs which implies that our ethanol-formalin-based embalming solution demonstrates an effective long-term antimicrobial preservation of corpses. [ABSTRACT FROM AUTHOR]

Finishing coatings in the wood-based composites industry not only influence the final appearance of the product but also serve to protect against fungi and molds and reduce the release of harmful substances, particularly formaldehyde and volatile organic compounds (VOCs). Carbon-rich materials, such as those derived from birch bark extraction, specifically suberin acids, can fulfill this role. Previous research has demonstrated that adding suberin acid residues (SAR) at 20% and 50% by weight significantly enhances the gas barrier properties of surface-finishing materials based on poly(lactide) (PLA) and polycaprolactone (PCL), particularly in terms of total VOC (TVOC) and formaldehyde emissions. This study aims to explore whether these properties can be further improved through the incorporation of nano-zinc oxide (nano-ZnO). Previous research has shown that these nanoparticles possess strong resistance to biological factors and can positively affect the characteristics of nanofilms applied as surface protection. The study employed PLA and PCL finishing layers blended with SAR powder at 10% w/w and included 2% and 4% nano-zinc oxide nanoparticles. The resulting blends were milled to create a powder, which was subsequently pressed into 1 mm-thick films. These films were then applied to raw particleboard surfaces. TVOC and formaldehyde emission tests were conducted. Additionally, the fungal resistance of the coated surfaces was assessed. The results showed that PLA/SAR and PCL/SAR composites with the addition of nano-zinc oxide nanoparticles exhibited significantly improved barrier properties, offering a promising avenue for developing biodegradable, formaldehyde-free coatings with enhanced features in the furniture industry. Furthermore, by utilizing SAR as a post-extraction residue, this project aligns perfectly with the concept of upcycling. [ABSTRACT FROM AUTHOR]

Mycotoxins are toxic secondary metabolites produced by certain molds and fungi that contaminate various food commodities, posing serious adverse effects on humans and animals. Aflatoxin, ochratoxin, trichothecene, fumonisin, zearalenone, patulin, and citrinin are some of the major mycotoxins affecting food and feed. The scientific community has focused on regulating food and feed materials due to their potential risks. Conventional techniques for mycotoxin detection have certain limitations in terms of sensitivity, specificity, and speed. In recent years, nanotechnology has emerged as a promising approach to revolutionize mycotoxin detection. This review provides an overview of nanotechnology‐based detection methods for mycotoxins in food and feed, discussing the basic aspects of mycotoxins, their health hazards, and conventional methods. It also explores various nanosensors and nanodevices developed to improve the sensitivity, selectivity, and speed of mycotoxin detection, thereby enhancing food safety and security. [ABSTRACT FROM AUTHOR]

Considering that commonly occurring mold fungi have the ability to develop very quickly on the surface of wood chips and the ongoing studies on finding the ways to use degraded wood, the conducted research was aimed at determining the physical and mechanical properties of chipboards containing various amounts (0%, 30%, 50%, and 70%) of pine chips inoculated with Aspergillus and Penicillium fungi, varying in a degree of infestation. The inoculation did not cause significant changes in the chemical composition of chips; however, it caused a decrease in the pH of their surface after nine-week incubation. While using them, lowered pH caused a deterioration in the mechanical characteristics of the boards and increased their thickness swelling and water absorption. Moreover, no changes in density, formaldehyde content and decomposition by brown-rot fungi were found. Overall, it was concluded that the addition of partially infested chips did not significantly affect any properties of the board; however, in the case of complete overgrowth, the amount of degraded chips should be less than 30%. [ABSTRACT FROM AUTHOR]

Horses stay in different types of stables; especially during the cold season, they stay inside for most of the day. A stable is also a place where many people spend quite a lot of time either as employees who care for and train horses or as equine enthusiasts. Keeping horses in stables causes their constant exposure to high concentrations of particulate matter (PM) and molds in the air inside these facilities. The study was conducted in Udórz Stud Farm located in the southern region of Poland. It was carried out in two different types of stables: three runners and two box stables. The study continued for 2 years; samples were collected in each season of the year. The following devices were used: a six-stage Andersen-Graseby cascade impactor, the DustTrak™ II Aerosol Monitor 8530. The obtained results allowed for the conclusion that horses kept in box stables are exposed to lower concentrations of molds and yeasts than those kept in runners. Molds dominated in the stable air during humid periods—spring and autumn—while yeasts were more prominent during summer and winter. It was observed that cleaning stables reduces the morphotic elements of fungi in the air, even though it results in a higher level of particulate matter in the stable air. It should be noted that microclimate conditions were optimal for horses practically throughout the whole year. Key points: • In stables, there is a high level of air intoxication, both by yeast and by mold fungi • The concentrations of fungi in the air depend on the season and the stable cleaning procedure • The PM concentrations depend on the type of stable [ABSTRACT FROM AUTHOR]

Mold infestations in buildings pose significant challenges to human health, affecting both private residences and hospitals. While molds commonly trigger asthma and allergies in the immunocompetent, they can cause life-threatening diseases in the immunocompromised. Currently, there is an unmet need for new strategies to reduce or prevent mold infestations. Far-UVC technology can inactivate microorganisms while remaining safe for humans. This study investigates the inhibitory efficacy of far-UVC light at 222 nm on the growth of common mold-producing fungi, specifically Penicillium candidum, when delivered in low-dose on-off duty cycles, a configuration consistent with its use in real-world settings. The inhibitory effect of the low-dose duty cycles was assessed on growth induced by i) an adjacent spore-producing P. candidum donor and ii) P. candidum spores seeded directly onto agar plates. In both setups, the far-UVC light significantly inhibited both vertical and horizontal growth of P. candidum, even when the UV doses were below the Threshold Value Limit of 23 mJ/cm2. These results suggest that far-UVC light holds the potential to improve indoor air quality by reducing or preventing mold growth, also when people are present. [ABSTRACT FROM AUTHOR]

Mushrooms have been an integral part of diet and medicinal practices since ancient times. In ancient Chinese culture, they were valued for both their nutritional properties and medicinal benefits. The first book on remedies belonging to the Chinese civilization mentions the therapeutic effects of various species of mushrooms. In the last three decades, researchers from all over the world, especially from countries such as Japan, China, Korea, the USA and Canada, have conducted numerous studies that have confirmed the beneficial effects of mushrooms on human health. These studies have highlighted their immunological, antioxidant, anti-tumor, and anti-inflammatory properties. The discovery of penicillin in 1928, derived from the mold Penicillium notatum (a lower fungus), was a watershed moment in medical history, revolutionizing the treatment of bacterial infections and saving millions of lives. This discovery also opened doors for the synthesis of other exceptional drugs. Over the past three decades, interest in medicinal mushrooms and their therapeutic properties has grown significantly. These mushrooms have been studied for their potential in treating immunological conditions and cancer. Thus, medicinal mushrooms have become the subject of intensive research in the field of complementary medicine. [ABSTRACT FROM AUTHOR]

Fungi, including filamentous fungi and yeasts, are major contributors to global food losses and waste due to their ability to colonize a very large diversity of food raw materials and processed foods throughout the food chain. In addition, numerous fungal species are mycotoxin producers and can also be responsible for opportunistic infections. In recent years, MALDI-TOF MS has emerged as a valuable, rapid and reliable asset for fungal identification in order to ensure food safety and quality. In this context, this study aimed at expanding the VITEK® MS database with food-relevant fungal species and evaluate its performance, with a specific emphasis on species differentiation within species complexes. To this end, a total of 380 yeast and mold strains belonging to 51 genera and 133 species were added into the spectral database including species from five species complexes corresponding to Colletotrichum acutatum, Colletotrichum gloeosporioides, Fusarium dimerum, Mucor circinelloides complexes and Aspergillus series nigri. Database performances were evaluated by cross-validation and external validation using 78 fungal isolates with 96.55% and 90.48% correct identification, respectively. This study also showed the capacity of MALDI-TOF MS to differentiate closely related species within species complexes and further demonstrated the potential of this technique for the routine identification of fungi in an industrial context. [ABSTRACT FROM AUTHOR]

Background: Annually, a massive amount of broiler litter (BL) is produced in the world, which causes soil and surface water pollution due to its high nitrogen content and microbial count. While ruminants can use this non‐protein nitrogen (NPN) source for microbial protein synthesis. This issue becomes more critical when protein sources are unavailable or very expensive. One of the sources of NPN is BL which is produced at a considerable amount in the world yearly. Objectives: This aim of this research was to conduct a survey of non‐thermal technologies such as electrocoagulation (EC), ultraviolet (UV) radiation, and ultrasound (US) waves on the microbial safety and nutritional value of BL samples as a protein source in ruminant diets. Materials and methods: The methodology of this study was based on the use of an EC device with 24 V for 60 min, UV‐C light radiation (249 nm) for 1 and 10 min, and US waves with a frequency of 28 kHz for 5, 10 and 15 min to process BL samples compared with shade‐dried samples. Chemical composition and nutritional values of processed samples were determined by gas production technique and measurement of fermentation parameters in vitro. Results: Based on the results, microbial safety increased in the samples processed with the US (15 min). The EC method had the best performance in reducing the number of fungi and mould. However, none of the methods could remove total bacteria and fungi. Digestibility of BL was similar in shade‐dried, EC, and US (10 min) treatments. In general, the use of EC and US15 without having adverse effects on gas production caused a decrease in the concentration of ammonia nitrogen. In contrast, it caused a decrease in neutral detergent fibre (NDF) in the investigated substrate. Conclusions: In general, it can be concluded that the use of US5 and EC methods without having a negative effect on the parameters of gas production and fermentation in vitro, while reducing NDF, causes a significant reduction in the microbial load, pathogens, yeast, and mould. Therefore, it is suggested to use these two methods to improve feed digestibility for other protein and feed sources. [ABSTRACT FROM AUTHOR]

Simple Summary: Mycotoxins pose a serious threat to human and animal health by causing acute poisoning and chronic effects. However, the toxicological mechanism of mycotoxins is complicated and unclear. Recent reports have revealed that activation of the nucleotide-binding, oligomerization domain (NOD)-like receptor (NLR) family pyrin domain containing 3 (NLRP3) inflammasome is linked with the tissue damage and inflammation induced by mycotoxin exposure. Through a comprehensive literature review, this study illuminates the dysregulated expression of NLRP3 inflammasome responses to mycotoxin exposure. This study not only advances our knowledge of the role of the NLRP3 inflammasome in mycotoxin exposure but also offers valuable insights for future studies of novel anti-inflammatory agents used in cases of mycotoxin exposure. Mycotoxins are secondary metabolites produced by several fungi and moulds that exert toxicological effects on animals including immunotoxicity, genotoxicity, hepatotoxicity, teratogenicity, and neurotoxicity. However, the toxicological mechanisms of mycotoxins are complex and unclear. The nucleotide-binding oligomerization domain (NOD)-like receptor (NLR) family pyrin domain containing 3 (NLRP3) inflammasome is a multimeric cytosolic protein complex composed of the NLRP3 sensor, ASC adapter protein, and caspase-1 effector. Activation of the NLRP3 inflammasome plays a crucial role in innate immune defence and homeostatic maintenance. Recent studies have revealed that NLRP3 inflammasome activation is linked to tissue damage and inflammation induced by mycotoxin exposure. Thus, this review summarises the latest advancements in research on the roles of NLRP3 inflammasome activation in the pathogenesis of mycotoxin exposure. The effects of exposure to multiple mycotoxins, including deoxynivalenol, aflatoxin B1, zearalenone, T-2 toxin, ochratoxin A, and fumonisim B1, on pyroptosis-related factors and inflammation-related factors in vitro and in vivo and the pharmacological inhibition of specific and nonspecific NLRP3 inhibitors are summarized and examined. This comprehensive review contributes to a better understanding of the role of the NLRP3 inflammasome in toxicity induced by mycotoxin exposure and provides novel insights for pharmacologically targeting NLRP3 as a novel anti-inflammatory agent against mycotoxin exposure. [ABSTRACT FROM AUTHOR]

A bio-matrix material (BMM) system is used to pretreat swine wastewater and reduce the nitrogen (N) concentration to the tolerance range of plants in constructed wetlands. In this study, rice straw (RS), wheat straw (WS), and corn stalk (CS) were applied to treat pollutants from swine wastewater, respectively. This one year-long field experiment make up for the lack of long-term experiments and mechanistic investigations of BMM. The pollutant removal efficiency, degradation process of crop straw, and the abundance of nitrogen cycling genes were determined in different BMM systems. The results showed that the removal efficiency of COD, TN, NH4+, and NO3− was the best in the initial 6 months. Furthermore, RS and WS exhibited favorable annual removal efficiency of TN and NH4+, which were 32.81% and 32.99%, 35.3% and 34.97%, respectively. Moreover, the removal efficiency of COD was 30.81% in three BMM systems. Meanwhile, it was found that the dry matter (DM) degradation of crop straws was fast in the first 4–5 months. The degradation rates of cellulose, hemicellulose, and lignin were 94.19%, 94.36%, and 87.32%, respectively, in 1 year. The abundance of nitrogen cycling genes significantly increased by adding BMM, compared with CK (P < 0.05). This showed the abundance of the hzsB gene in RS was the highest, while nirK, nirS, AOA, and AOB were the highest in WS. The addition of RS and WS was better than that of CS in promoting the abundance of nitrogen cycling microorganisms. The results indicated that adding BMM could enhance the anaerobic ammonia oxidation, nitrification, and denitrification. This study not only extends our comprehension of BMM mechanisms in swine wastewater treatment but also serves as a guiding light for numerous farms in similar climate regions. [ABSTRACT FROM AUTHOR]

Fungi play an important and multifaceted role in the production and processing of food, influencing various stages from cultivation to consumption. This paper explores the complex relationship between fungi and food systems, highlighting their diverse contributions. Firstly, fungi serve as essential agents in food cultivation, aiding in the breakdown of organic matter and the recycling of nutrients, and promoting plant growth through symbiotic relationships. Moreover, fungi such as yeasts and molds are integral to fermentation processes, yielding a wide array of fermented foods and beverages with unique flavors and textures. Additionally, fungi are indispensable in the creation of enzymes and bioactive compounds utilized in food processing, enhancing the nutritional value, shelf life, and safety. However, certain fungal species pose significant challenges as food spoilage agents and mycotoxin producers, necessitating stringent quality control measures. Understanding the intricate interplay between fungi and food systems is essential for optimizing food production, ensuring food security, and mitigating the risks associated with fungal contamination. This paper synthesizes current research to elucidate the important role that fungus play in shaping the modern food industry and underscores the importance of ongoing scientific inquiry in harnessing their potential for sustainable and safe food production. [ABSTRACT FROM AUTHOR]

Mild heat (MH) treatment and ascorbic acid (AsA) addition can improve the quality of fresh-cut produce when used individually; however, their combined effect remains unclear. Herein, fresh-cut carrots were used as models to explore the effects of MH (50 °C)–AsA (0.5%) on quality properties including reactive oxygen species (ROS) metabolism, antioxidants, lignin metabolism, naturally present microbes, and inoculated pathogens (Escherichia coli O157: H7 and Salmonella Typhimurium) during storage (0–5 d, 4 °C). The results indicate that the antioxidant properties in the MH–AsA group were consistent with those of single treatments, resulting in a consistent ROS-scavenging effect. From day 3–5, lignin synthesis was significantly inhibited by MH–AsA as compared with single treatments, probably because the two enzymes (phenylalanine ammonia-lyase and peroxidase) responsible for lignin synthesis exhibited lower expressions. Microbial analysis revealed that MH–AsA treatment led to the lowest counts of both pathogens and aerobic mesophilic bacteria at 0–5 d. Conversely, the inhibitory effect of MH–AsA treatment on mold and yeast was consistent with the single treatments. These results suggest that MH–AsA is a low-cost and safe approach to improve the physiological characteristics of fresh-cut produce while reducing microbial risk. [ABSTRACT FROM AUTHOR]

Eight samples of propolis commercially available on south-eastern Poland's beekeeping market were compared in terms of quality, chemical composition and biological activity, including antioxidant and antimicrobial properties. The organoleptic characteristics and physicochemical requirements indicated that only 50% of tested propolis samples was classified to class II regarding obligatory limits, while the others were out-class. A big variation in mineral composition was determined by the ICP-OES method but all samples were free of heavy metals (Pb, Cd and Ni). Although mesophilic bacteria, yeasts and moulds occurred in tested propolis (in general lower than 102 CFU/g), E. coli and spore-forming sulphite-reducing bacteria as well as Salmonella and Shigella bacteria were not detected. High antioxidant activity and total phenolic content for all samples was confirmed, which was correlated with antibacterial activity tested against E. coli ATCC 11775 strain. Additionally, the propolis sample with the strongest antibacterial activity (MIC 0.33 mg/mL) inhibited biofilm formation of S. aureus and S. epidermidis ATCC 35984 (MBIC 0.66 and 5.25 mg/mL, respectively). However, great variation in terms of antioxidant activity and HPLC polyphenolic profile were observed, and sakuranetin and pinobanksin were identified as the most effective antioxidant components. Moreover, the usefulness of ATR-FTIR spectra analysis was confirmed as a quick method for initial testing of propolis quality. [ABSTRACT FROM AUTHOR]

Volatile organic compounds (VOCs) produced by yeasts can positively affect crops, acting as antifungals or biostimulants. In this study, Aureobasidium pullulans and Metschnikowia pulcherrima were evaluated as potential antagonists of Trichoderma spp., common fungal pathogen in mushroom cultivation. To assess the biocontrol ability and biostimulant properties of the selected yeast species, in vitro co-culture and VOCs exposure assays were conducted. In both assays, VOCs produced by Aureobasidium spp. showed the stronger antifungal activity with a growth inhibition up to 30 %. This result was further confirmed by the higher volatilome alcohol content revealed by solid phase microextraction-gas chromatography mass spectrometry (SPME/GC–MS). Overall, Aureobasidium strains can be potentially used as biocontrol agent in Pleorotus ostreatus and Cyclocybe cylindracea mycelial growth, without affecting their development as demonstrated by VOCs exposure assay and Fourier-transform infrared spectroscopy (FT-IR). Conversely, M. pulcherrima was characterized by a lower or absent antifungal properties and by a volatilome composition rich in isobutyl acetate, an ester often recognized as plant growth promoter. As confirmed by FT-IR, Lentinula mycelia exposed to M. pulcherrima VOCs showed a higher content of proteins and lipids, suggesting an improvement of some biochemical properties. Our study emphasizes that VOCs produced by specific yeast strains are potentially powerful alternative to synthetic fungicide in the vegetative growth of mushroom-forming fungi and also able to modify their biochemical composition. • Yeasts VOCs are characterized by different antifungal and biostimulant properties. • Aureobasidium spp. VOC have the stronger antifungal activity against Trichoderma spp. • M. pulcherrima VOCs improve mushrooms growth and nutritional characteristics. • FT-IR spectra suggested M. pulcherrima VOCs as biostimulant of Lentinula edodes. [ABSTRACT FROM AUTHOR]

The anti-fungal properties of the probiotic bacterium Bacillus subtilis have been studied extensively in agriculture and ecology, but their applications in the built environment remain to be determined. Our work aims to utilize this biological component to introduce new diverse anti-mold properties into paint. "Mold" refers to the ubiquitous fungal species that generate visible multicellular filaments commonly found in household dust. The development of mold leads to severe health problems for occupants, including allergic response, hypersensitivity pneumonitis, and asthma, which have significant economic and clinical outcomes. We here demonstrate the robust effect of a commercial paint enhanced with Bacillus subtilis cells against the common mold agent, Aspergillus niger, and identify three biosynthetic clusters essential for this effect. Our results lay the foundation for bio-convergence and synthetic biology approaches to introduce renewable and environmentally friendly bio-anti-fungal agents into the built environment. [ABSTRACT FROM AUTHOR]

The management of infected wounds is always of great significance and urgency in clinical and biomedical fields. Recent efforts in this area are focusing on the development of functional wound patches with effective antibacterial, drug delivery, and sensor properties. Here, we present novel hyaluronic acid (HA) microneedle patches with these features by encapsulating aminobenzeneboronic acid‐modified gold nanoclusters (A‐GNCs) for infected wound management. The A‐GNCs loaded microneedle patches were derived from negative‐mold replication and showed high mechanical strength to penetrate the skin. The release of the A‐GNCs was realized by the degradation of HA, and the self‐monitor of the released actives was based on the dynamic bright orange fluorescence emitted from A‐GNCs under ultraviolet radiation. As the A‐GNCs could destroy bacteria membranes, the microneedle patches were with excellent in vitro antibiosis ability. Based on these features, we have demonstrated the bacteria inhibition, residual drug self‐monitoring, and wound healing promotion abilities of the microneedle patches in Escherichia coli‐ or Staphylococcus aureus‐infected wound management. These results indicated the great potential of such A‐GNCs loaded microneedle patches for clinical applications. [ABSTRACT FROM AUTHOR]

Sub-high temperature Daqu, a traditional solid fermenting agent used in Chinese strong-aroma Baijiu production, is abundant in diverse microorganisms, including bacteria, yeasts, molds, and actinomycetes. Among these, yeasts are pivotal for ethanol production and flavor formation. However, counting yeasts in Daqu is challenging due to interference from molds and bacteria. Antibiotics are employed to inhibit bacterial growth, but there is no practical way to suppress molds without affecting the growth of yeasts. In this study, short-chain carboxylates (C1-C6) were added to the culture medium at various pH conditions to investigate their effects on the growth of molds and yeasts. The results demonstrated distinct inhibitory effects of the short-chain carboxylates, depending on both pH and concentration. Several tested short-chain carboxylates effectively suppressed mold growth on agar plates while leaving yeast growth unaffected. This suggests a simple and feasible method for enhancing the efficiency of yeast isolation and counting in Daqu. Such an approach is valuable for studying yeasts in diverse and complex habitats. [ABSTRACT FROM AUTHOR]

Background: Medicinal plants that possess antimicrobial and antioxidant properties have garnered significant attention for their role in maintaining food quality, improving safety, and impeding spoilage. They also can aid in controlling food contamination risks and augmenting the nutritional value of foods. Objective: The study aimed to obtain botanical extracts possessing antimicrobial capabilities and use them to inhibit the growth of molds and yeasts. Additionally, these extracts are aimed at prolonging product shelf life by harnessing their antioxidant attributes. Methods: Several microorganisms, including E. coli and Pseudomonas, were subjected to testing. Ethanolic alcohol, chloroform, and essential oil extracts were prepared; the tablets were then immersed in these solutions to test their efficacy. Results: The leaf extracts displayed significant antimicrobial efficacy against essential oil extracts with Staphylococcus aureus and Serratia marcescens, while the organic extracts, which included ethyl alcohol and chloroform, did not show any inhibitory effects against bacteria. Conclusion: The basil leaf extract demonstrated significant antimicrobial activity against microorganisms, particularly in the case of essential oil extracts compared with other methods of extraction. However, Gram-positive bacteria showed a better response for the essential oils method than that of Gram-negative bacteria. [ABSTRACT FROM AUTHOR]

The microbiological quality of dairy products from small-scale producers in Serbia was analysed. A total of 302 dairy products [raw (n = 111) and pasteurized milk cheeses (n = 79) and kajmak (n = 112)], were collected and tested for the presence of pathogens, Listeria monocytogenes and Salmonella spp., and enumerated for Coagulase-positive staphylococci (CPS), Escherichia coli, and yeasts and moulds. None of the samples tested positive for Salmonella spp., while L. monocytogenes was recovered from one raw milk cheese and five kajmak samples. Raw milk cheese and kajmak also had higher levels of indicator microorganisms, namely E. coli and yeast and moulds. Molecular serotyping grouped L. monocytogenes isolates into serogroups 1 (1/2a and 3a) and 3 (1/2b, 3b, and 7). When exposed to eight antibiotics, L. monocytogenes isolates were mostly sensitive, with the exception of oxacillin and reduced susceptibility to clindamycin, penicillin G, and trimethoprim/sulfamethoxazole, emphasizing the importance of continuous surveillance for antimicrobial resistance. Samples that tested positive for Listeria spp. also had higher loads of indicator microorganisms, namely E. coli and yeast and moulds, suggesting lapses in hygiene practices during production. Collectively, these data emphasize the need for improved food safety and hygiene practices among small-scale dairy producers. This is crucial to reduce the microbial contamination and improve both the quality and safety of dairy products in the Serbian market. [ABSTRACT FROM AUTHOR]

Dairy products are highly susceptible to contamination from microorganisms. This study aimed to evaluate the efficacy of hydroxypropyl methylcellulose (HPMC) and propolis film as protective coatings for cheese. For this, microbiological analyses were carried out over the cheese' ripening period, focusing on total mesophilic bacteria, yeasts and moulds, lactic acid bacteria, total coliforms, Escherichia coli, and Enterobacteriaceae. Physicochemical parameters (pH, water activity, colour, phenolic compounds content) were also evaluated. The statistical analysis (conducted using ANOVA and PERMANOVA) showed a significant interaction term between the HPMC film and propolis (factor 1) and storage days (factor 2) with regard to the dependent variables: microbiological and physicochemical parameters. A high level of microbial contamination was identified at the baseline. However, the propolis films were able to reduce the microbial count. Physicochemical parameters also varied with storage time, with no significant differences found for propolis-containing films. Overall, the addition of propolis to the film influenced the cheeses' colour and the quantification of phenolic compounds. Regarding phenolic compounds, their loss was verified during storage, and was more pronounced in films with a higher percentage of propolis. The study also showed that, of the three groups of phenolic compounds (hydroxybenzoic acids, hydroxycinnamic acids, and flavonoids), hydroxycinnamic acids showed the most significant losses. Overall, this study reveals the potential of using HPMC/propolis films as a coating for cheese in terms of microbiological control and the preservation of physicochemical properties. [ABSTRACT FROM AUTHOR]

Bell pepper presents rapid weight loss and is highly susceptible to gray mold caused by the fungus Botrytis cinerea. The most employed method to control this disease is the application of synthetic fungicides such as thiabendazole (TBZ); however, its continued use causes resistance in fungi as well as environmental problems. For these reasons, natural alternatives arise as a more striking option. Currently, bell pepper fruits are coated with carnauba wax (CW) to prevent weight loss and improve appearance. Moreover, CW can be used as a carrier to incorporate essential oils, and previous studies have shown that thyme essential oil (TEO) is highly effective against B. cinerea. Therefore, this study aimed to evaluate the effect of CW combined with TEO on the development of gray mold and maintenance of microestructural and postharvest quality in bell pepper stored at 13°C. The minimal inhibitory concentration of TEO was 0.5%. TEO and TBZ provoked the leakage of intracellular components. TEO and CW + TEO treatments were equally effective to inhibit the development of gray mold. On the quality parameters, firmness and weight loss were ameliorated with CW and CW + TEO treatments; whereas lightness increased in these treatments. The structural analysis showed that CW + TEO treatment maintained the cell structure reducing the apparition of deformities. The results suggest that CW + TEO treatment could be used as a natural and effective antifungal retarding the appearance of gray mold and maintaining the postharvest quality of bell pepper. Practical Application: CW and TEO are classified as generally recognized as safe (GRAS) by the US Food and Drug Administration (FDA). This combination can be employed on the bell pepper packaging system to extend shelf life and oppose gray mold developments. Bell pepper fruits are normally coated with lipid‐base coatings such as CW before commercialization; therefore, TEO addition would represent a small investment without any changes on the packaging system infrastructure. [ABSTRACT FROM AUTHOR]

Nowadays, consumers are more aware of the effects of their diet on their health, and thus demand natural or minimally processed food products. Therefore, research has focused on processes that assure safe products without jeopardizing their nutritional properties. In this context, this work aimed to evaluate the effects of high-pressure processing (550 MPa/3 min/15 °C, HPP) on a fruit salad (composed of melon juice and pieces of Golden apple and Rocha pear) throughout 35 days of storage at 4 °C. For the physicochemical properties analysed (browning degree, polyphenol oxidase activity, antioxidant activity (ABTS assay), and volatile profile), a freshly made fruit salad was used, while for the microbiological tests (total aerobic mesophiles, and yeast and moulds) spoiled melon juice was added to the fruit salad to increase the microbial load and mimic a challenge test with a high initial microbial load. It was determined that processed samples were more microbiologically stable than raw samples, as HPP enabled a reduction of almost 4-log units of both total aerobic mesophiles and yeasts and moulds, as well as an almost 1.5-fold increase in titratable acidity of the unprocessed samples compared to HPP samples. Regarding browning degree, a significant increase (p < 0.05) was observed in processed versus unprocessed samples (roughly/maximum 68%), while the addition of ascorbic acid decreased the browning of the samples by 29%. For antioxidant activity, there were no significant differences between raw and processed samples during the 35 days of storage. An increase in the activity of polyphenol oxidase immediately after processing (about 150%) was confirmed, which was generally similar or higher during storage compared with the raw samples. Regarding the volatile profile of the product, it was seen that the compounds associated with melon represented the biggest relative percentage and processed samples revealed a decrease in the relative quantity of these compounds compared to unprocessed. Broadly speaking, HPP was shown to be efficient in maintaining the stability and overall quality of the product while assuring microbial safety (by inactivating purposely inoculated microorganisms), which allows for longer shelf life (7 versus 28 days for unprocessed and processed fruit salad, respectively). [ABSTRACT FROM AUTHOR]

Mycopathogenic moulds are responsible for the greatest crop losses of cultivated mushrooms, thus having a significant negative economic impact on industry. Pesticides are the most common treatment against mycopathogenic moulds, but ultraviolet-B (UV-B, 280–315 nm) radiation could be a more ecological alternative. Thus, we studied the effect of UV-B (at doses from 8 to 192 kJ m−2) on four common mycopathogenic moulds (Cladobotryum mycophilum, Lecanicillium fungicola, Trichoderma aggressivum, and Mycogone perniciosa) under in vitro conditions, using four different culture media. UV-B was tremendously effective in inactivating mould spores even at the lowest dose, with the exception of those of T. aggresivum. Contrarily, UV-B did not present any effect on the development of the host mycelium (Agaricus bisporus), even at the highest dose, when cultivated on Compost Tea medium (CT). This is the most similar medium to the substrate used for commercial mushroom cultivation. UV-B reduced the mould mycelia development in a dose-response manner, but this reduction depended on the species, with the strongly pigmented T. aggressivum as the most tolerant species. Regarding the culture media, all of them (especially CT) absorbed UV-B intensely, contributing to the protection of the mycelia. Overall, UV-B radiation could constitute an ecologically friendly alternative to chemical treatments against mycopathogenic moulds, due to its capacity to inactivate their spores and (in some cases) their mycelia without affecting their hosts. [ABSTRACT FROM AUTHOR]

Ice consumption has widely increased over the last decade. Cases of ice contamination by various microorganisms (bacteria, viruses and fungi) have been documented in the literature. In this review, we summarize the findings of selected articles on the hygienic and sanitary quality of food ice from 1 January 2013 to 31 December 2023. A total of 14 articles found via the PubMed search engine during the study period were reviewed. From the comparison between the ice produced on an industrial scale and the ice produced on a local scale in food businesses, the latter was found to be more contaminated by microorganisms. The most detected bacteria included Escherichia coli, coliforms, Pseudomonas spp., Staphylococcus aureus; three studies evaluated the presence of Vibrio cholerae and Vibrio parahaemolyticus; two studies highlighted the presence of viruses (Rotavirus and Norovirus). Finally, two studies detected the presence of fungi (molds and yeasts). Almost all authors of the studies argued that ice contamination also depends on the hygienic–sanitary quality of the ice-making machines. The results show that the information currently available in the literature on the hygienic–sanitary quality of ice is incomplete and that future national and international scientific studies need to be carried out. [ABSTRACT FROM AUTHOR]

Staka is a traditional Greek sour cream made mostly from spontaneously fermented sheep milk or a mixture of sheep and goat milk. At the industrial scale, cream separators and starter cultures may also be used. Staka is sometimes cooked with flour to absorb most of the fat. In this study, we employed culture-based techniques, amplicon sequencing, and shotgun metagenomics to analyze the Staka microbiome for the first time. The samples were dominated by Lactococcus or Leuconostoc spp. Most other bacteria were lactic acid bacteria (LAB) from the Streptococcus and Enterococcus genera or Gram-negative bacteria from the Buttiauxella, Pseudomonas, Enterobacter, Escherichia-Shigella, and Hafnia genera. Debaryomyces, Kluyveromyces, or Alternaria were the most prevalent genera in the samples, followed by other yeasts and molds like Saccharomyces, Penicillium, Aspergillus, Stemphylium, Coniospotium, or Cladosporium spp. Shotgun metagenomics allowed the species-level identification of Lactococcus lactis, Lactococcus raffinolactis, Streptococcus thermophilus, Streptococcus gallolyticus, Escherichia coli, Hafnia alvei, Streptococcus parauberis, and Enterococcus durans. Binning of assembled shotgun reads followed by recruitment plot analysis of single reads could determine near-complete metagenome assembled genomes (MAGs). Culture-dependent and culture-independent analyses were in overall agreement with some distinct differences. For example, lactococci could not be isolated, presumably because they had entered a viable but not culturable (VBNC) state or because they were dead. Finally, several LAB, Hafnia paralvei, and Pseudomonas spp. isolates exhibited antimicrobial activities against oral or other pathogenic streptococci, and certain spoilage and pathogenic bacteria establishing their potential role in food bio-protection or new biomedical applications. Our study may pave the way for additional studies concerning artisanal sour creams to better understand the factors affecting their production and the quality. [ABSTRACT FROM AUTHOR]

This study aimed to determine the effects of carbon dioxide concentration in modified atmosphere packaging (MAP) on the quality criteria and shelf life of whole wheat flour bread. Four different concentrations of CO2 and N2 gases (30% CO2 + 70% N2, 50% CO2 + 50% N2, 70% CO2:30% N2 and 100% CO2) were applied to the bread samples, which were packaged with PA/EVOH/LDPE (polyamide/ethylene vinyl alcohol/low‐density polyethylene). The samples were stored at room temperature (25°C ± 1°C) for 13 days. The control group was packaged using BOPP (bi‐oriented polypropylene) under atmospheric air as in traditional current use. The effects of MAP on headspace gas analysis, pH, moisture content, water activity, water‐holding capacity, blue value, hardness, total mould and yeast count and sensory evaluation were analysed on days 0, 3, 4, 5, 7, 10 and 13. The results showed that the most effective gas combination in extending the shelf life of whole wheat bread was 100% CO2, and its shelf life was 10 days, whereas it was only 3 days for the control group. Increasing concentrations of CO2 significantly affected mould and yeast growth. As the CO2 concentration increased, the bread exhibited higher water‐holding capacity and blue values, which are important indicators for bread staling. An improved preservation of sensory properties was observed in proportion to increasing CO2 concentrations. However, the CO2 gas concentration did not affect the hardness of the bread. Overall, the study suggests that MAP technology, particularly using 100% CO2, can effectively extend the shelf life of whole wheat flour bread without the need for preservatives, not only extending the microbiological shelf life but also increasing the sensory shelf life. The species that grew in air‐packaged samples were suppressed under modified atmosphere conditions and chalk mould fungi were the dominant and shelf life‐impacting species in the MAP samples. These findings could be beneficial in reducing bread wastage, which is a critical issue in today's society due to the limited shelf life of bread caused by rapid microbiological deterioration or staling. [ABSTRACT FROM AUTHOR]

Porous wood-based boards, like any lignocellulosic material, are susceptible to biocorrosion caused by mold fungi. Their durability can be extended by using biocides. Due to the fact that porous boards are considered an ecological material, it would be beneficial to also use natural agents to protect them. For this purpose, the surface of softboards was protected with a 30% solution of cinnamon bark oil in ethanol. Three application levels were used: 75 g/m2, 120 g/m2, and 200 g/m2 of solution. It has been shown that the cinnamon bark oil solution used at an application rate of 200 g/m2 is an effective fungicide, protecting softboards (SBs) against the development of mold fungi: T. viride and C. globosum. The dominant volatile component of cinnamon oil identified in the boards turned out to be cinnamaldehyde. Three months after treatment, this substance constituted 74% of the volatile components. The proposed treatment method allows for short-term preventive protection of boards against mold fungi. [ABSTRACT FROM AUTHOR]

Fermentation has been used for centuries to enhance the sensory and nutritional qualities and the antioxidant content of plant-based foods, making them beneficial for health. This study aims to investigate the microbiological and nutritional qualities of fermented porridges produced in northern Benin. Various nutritional tests and the identification of different microorganisms have gained insights into eight porridges produced in 9 localities of northern Benin. Lactic acid bacteria have the highest proportion among all microorganisms in fermented porridges, followed by the total mesophyll aerobic flora. E. coli, thermotolerant coliforms, and molds are not present in all porridges analyzed. Recorded data suggested that porridges have a variable microbial load depending on the collection municipalities. The dry matter of the eight types of porridge varies greatly, with akloui having 27.03 ± 3.83 g/100 g and fourra having 48.63 ± 3.83 g/100 g. The total ashes also differ significantly, with bita having 39.36 ± 4.67 g/100 g and sagagnèga having 63.19 ± 4.67 g/100 g. It is worth noting that all fermented porridges have a pH lower than 5 , and the titratable acidity ranges from 0.01 ± 0.00 g to 0.02 ± 0.00 g. The brix degree varies from 0.46 ± 0.54 to 4.4 ± 0.54. The beta-carotene values of the 8 types of porridge vary from 0.037 ± 0.018 mg/g to 0.138 ± 0.018 mg/g, while the total sugars range from 1.926 ± 0.877 to 5.773 ± 0.877 g/100 g. The lipid content, when present, varies from 0.226 ± 0.029% to 0.408 ± 0.029%. Finally, the protein percentage of the porridge ranges from 7.061 ± 0.779 to 12.419 ± 0.779. [ABSTRACT FROM AUTHOR]

While Botrytis cinerea causes gray mold on many plants, its close relative, Botrytis fabae, is host-specifically infecting predominantly faba bean plants. To explore the basis for its narrow host range, a gapless genome sequence of B. fabae strain G12 (BfabG12) was generated. The BfabG12 genome encompasses 45.0 Mb, with 16 chromosomal telomere-to-telomere contigs that show high synteny and sequence similarity to the corresponding B. cinerea B05.10 (BcB0510) chromosomes. Compared to BcB0510, it is 6% larger, due to many AT-rich regions containing remnants of transposable elements, but encodes fewer genes (11,420 vs. 11,707), due to losses of chromosomal segments with up to 20 genes. The coding capacity of BfabG12 is further reduced by nearly 400 genes that had been inactivated by mutations leading to truncations compared to their BcB0510 orthologues. Several species-specific gene clusters for secondary metabolite biosynthesis with stage-specific expression were identified. Comparison of the proteins secreted during infection revealed high similarities, including 17 phytotoxic proteins that were detected in both species. Our data indicate that evolution of the host-specific B. fabae occurred from an ancestral pathogen with wide host range similar to B. cinerea and was accompanied by losses and degeneration of genes, thereby reducing its pathogenic flexibility. [ABSTRACT FROM AUTHOR]

Saccharification fermentation is a very important technique for Chinese baijiu, which effects its yield and flavor. Eurotium cristatum has the ability to trigger saccharification, but has not been applied to the saccharification fermentation in Chinese baijiu. In this study, E. cristatum is added to the mold culture for the co‐fermentation of Wuliangye liquor to verify whether it enhances the saccharification efficiency. Starch from mold culture is analyzed to infer the effect. Microorganisms in the mold culture and liquor flavor substances are also evaluated. Results show that reducing sugar in the fermented grains reaches the maximum value of 40 g/100 g when 8 mL of E. cristatum suspension is added to 100 g of mold culture. Co‐fermentation using E. cristatum increases the amylose content, decreases the molecular weight, and forms irregular starch particles and an evident crystal structure of starch from the mold culture. These phenomena in starch molecules correspond to the mechanism by which E. cristatum enhances saccharification efficiency. What is more, E. cristatum also improves the growth of the original microorganisms in the mold culture, thereby benefitting the flavor of Wuliangye liquor. Therefore, it shows promise for application in saccharification fermentation of Wuliangye liquor. [ABSTRACT FROM AUTHOR]

The rapid increase in the antibiotic resistance of microorganisms, capable of causing diseases in humans as destroying cultural heritage sites, is a great challenge for modern science. In this regard, it is necessary to develop fundamentally novel and highly active compounds. In this study, a series of N4-alkylcytidines, including 5- and 6-methylcytidine derivatives, with extended alkyl substituents, were obtained in order to develop a new generation of antibacterial and antifungal biocides based on nucleoside derivatives. It has been shown that N4-alkyl 5- or 6-methylcytidines effectively inhibit the growth of molds, isolated from the paintings in the halls of the Ancient Russian Paintings of the State Tretyakov Gallery, Russia, Moscow. The novel compounds showed activity similar to antiseptics commonly used to protect works of art, such as benzalkonium chloride, to which a number of microorganisms have acquired resistance. It was also shown that the activity of N4-alkylcytidines is comparable to that of some antibiotics used in medicine to fight Gram-positive bacteria, including resistant strains of Staphylococcus aureus and Mycobacterium smegmatis. N4-dodecyl-5- and 6-methylcytidines turned out to be the best. This compound seems promising for expanding the palette of antiseptics used in painting, since quite often the destruction of painting materials is caused by joint fungi and bacteria infection. [ABSTRACT FROM AUTHOR]

Atractilina Dearn. & Barthol. and Spiropes Cif. are genera of asexual fungi that comprise species mainly hyperparasitic on black mildews (Meliolales, Ascomycota). Although a common group of anamorphic fungi, they have been described up to now only by morphology and their systematic position is unknown. The present study provides a morphological treatise of all known species of Atractilina and Spiropes hyperparasitic on Meliolales, including insights into their systematic position, based on DNA sequences generated here for the first time. The study was conducted, based on 33 herbarium specimens and 23 specimens recently collected in Benin and Panama. The obtained DNA sequence data (28S rDNA and ITS rDNA) of A. parasitica and of two species of Spiropes show systematic placements in the Dothideomycetes and Leotiomycetes, respectively. The sequence data of the two Spiropes spp. do not group together. Moreover, the anamorph-teleomorph connection between Atractilina parasitica and Malacaria meliolicola, a pseudothecioid fungus, is confirmed. Three species in the genus Spiropes are proposed as new to science, namely S. angylocalycis, S. carpolobiae and S. croissantiformis. Four species are reported for Benin for the first time, three species for Panama and one species for mainland America. Atractilina and Spiropes are currently two genera with highly heterogeneous species and they might have to be split in the future, once the taxonomic concepts are validated by morphology and molecular sequence data. [ABSTRACT FROM AUTHOR]

In this study, the physicochemical properties of plasma‐activated water (PAW) prepared from air, O2 ${{\rm{O}}}_{2}$, Ar $\text{Ar}$, and N2 ${{\rm{N}}}_{2}$ plasma and the trend of the concentration of reactive oxygen and nitrogen species (RONS) with respect to time were investigated and related to the effect of PAW on navel orange mold. The results showed that O2 ${{\rm{O}}}_{2}$ PAW had a strong lethal effect on navel orange mold and could effectively inhibit the mildewing activity of pathogenic spores. In addition, O2 ${{\rm{O}}}_{2}$ PAW is effective in reducing weight loss and decay of navel oranges during storage. This study suggests the potential application of PAW to prevent fungal infections during storage of agricultural products. [ABSTRACT FROM AUTHOR]

A crucial control point for good hygiene is the process of cleaning and disinfecting the slaughterhouse, the animals, the environment, and the hands of the workers. It is a crucial phase in the biosecurity process. By counting the aerobic bacteria, Coliform, Staphylococcus aureus, Salmonella, moulds, and yeasts, the current study was designed to assess the abattoir's contamination and its effects. A total of 120 samples were collected, including swabs from the floor, wall, workers' hands, animals' skin, and the outside of the carcass (20 samples/each). Results of aerobic plate count clarified that the highest mean value was recorded in the abattoirs' floors and walls (1.48x106±2.29x105, 9.54x105±1.44x105 respectively), which were then followed by the skin, hands of workers and the outer surfaces of the carcass (5.71x104±1.26x104, 5.39x104±1.15x104, 4.50x104±1.68x104 respectively). After using disinfectants, chloroxylenol was the most effective disinfection across all tested samples, with the best reduction percentage. The highest mean value of staphylococcus count was recorded in the hands of workers (1.95x105±1.03x105) had the greatest staphylococcus count, followed by the outer surface of the carcass and the skin (6.66x104±2.47x104, 6.47x104±1.22x104 respectively). The highest mean value of Coliform count was recorded on the outer surface of the carcasses 43.45±10.61 MPN/cm2, followed by the skin and the hands of the workers (33.90±8.27, 28.90±11.57 MPN/cm2 respectively. Several spp of Coliform were detected such as Citrobacter diversus, Escherichia coli, Enterobacter aerogenes and Klebsiella pneumonia. Staph. aureus was reported depending on coagulase test, the incidence of infection was higher in Carcass than in hands and skin. Moreover, Salmonella incidence was higher in the hands followed by carcass. The abattoir's air samples had high mean value of mould 25.93±2.83 compared to yeast 17.80±3.58 (cfu/plate/minute). Regarding mould, H2O2 showed the best reduction rate followed by chlorine. While regarding yeast, chlorine was the best followed by chloroxylenol. Results of microbiological examination of the collected samples reflected a clear state of contamination in abattoirs environment and the effect of disinfectants. [ABSTRACT FROM AUTHOR]

This study aimed to investigate the effectiveness of dimethyl dicarbonate (DMDC) at various concentrations (0–250 ppm) in inhibiting the growth of Escherichia coli TISTR 117 and spoilage microbes in passion fruit juice (PFJ) and its impact on the physicochemical and antioxidant quality of the juice during refrigerated storage. The highest log reduction in the total viable count, yeast/molds and E. coli was attained in PFJ samples with 250 ppm of DMDC (p ≤ 0.05) added. Microbial growth inhibition by DMDC followed the first-order kinetic model with a coefficient of determination (R2) and inhibition constants (k) ranging from 0.98 to 0.99 and 0.022 to 0.042, respectively. DMDC at 0–250 ppm showed an insignificant effect on pH, °Brix, color (L*, a*, b*), ascorbic acid, total phenolic compound (TPC), total flavonoid content, and antioxidant activity (DPPH, FRAP) (p > 0.05). Control (untreated PFJ), DMDC-250 ppm, and pasteurized (15 s at 72 °C) samples were subjected to 27 days of cold storage at 4 °C. A decreasing trend in pH, total soluble solid, ascorbic acid content, DPPH and FRAP values were observed in all the samples during refrigerated storage. However, the DMDC-250 ppm sample showed a better prospect in physicochemical quality changes compared to the pasteurized and untreated control PFJ samples. ΔE values showed marked changes in the control sample than the DMDC-250 ppm and pasteurized samples at 27 days of storage. Additionally, the total viable count and yeast/mold count were augmented during storage, and an estimated shelf-life of the control, DMDC-250 ppm, and pasteurized samples was approximately 3, 24 and 18 days, respectively. In conclusion, DMDC at 250 ppm could ensure microbial safety without affecting the quality attributes of PFJ during 24 days of storage at 4 °C. [ABSTRACT FROM AUTHOR]

Biodeterioration may take place due to the influence of microorganisms, leading to the deterioration or destruction of materials. This process involves distinct mechanisms of material breakdown, such as mechanical damage, decomposition, corrosion induced by microorganisms, and fouling caused by living organisms. Research and literature data on biological corrosion of polymer-modified cement materials (polycarboxylate resin) are ambiguous and even contradictory. Samples, 20x20x160 mm in size, made of cement-polymer mortar with 5% polycarboxylate resin were prepared for the test, with 6 specimens for each determination. The study determined the level of contamination of the material, using the culture method and COD, after 18 months of exposure to Penicillium and Cladosporium fungi. In addition to this, bulk moisture content, water absorption, flexural strength and internal structure were determined using a scanning microscope and EDS analysis was carried out. The beneficial role of polymers has been demonstrated, e.g. by sealing the structure of cement-polymer materials. However, there is also an increased development of biocorrosion associated with organic material as a food source, especially for molds that colonize materials in favorable conditions. The test results showed that there was a strong growth of mold fungi on the material and the mass humidity was high. However, the strength increased slightly, and after further exposure to a corrosive environment it decreased again. [ABSTRACT FROM AUTHOR]

In the fight against antibiotic resistance, which is rising to dangerously high levels worldwide, new strategies based on antibiotic-conjugated biocompatible polymers bound to magnetic nanoparticles that allow the drug to be manipulated and delivered to a specific target are being proposed. Here, we report the direct surface engineering of nontoxic iron oxide nanoparticles (IONs) using biocompatible dextran (Dex) covalently linked to β-cyclodextrin (β-CD) with the ability to form non-covalent complexes with silver-sulfamethazine (SMT-Ag). To achieve a good interaction of β-CD-modified dextran with the surface of the nanoparticles, it was functionalized with diphosphonic acid (DPA) that provides strong binding to Fe atoms. The synthesized polymers and nanoparticles were characterized by various methods, such as nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR) and ultraviolet–visible (UV–Vis) spectroscopies, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), atomic absorption spectroscopy (AAS), dynamic light scattering (DLS), etc. The resulting magnetic ION@DPA-Dex-β-CD-SMT-Ag nanoparticles were colloidally stable in water and contained 24 μg of antibiotic per mg of the particles. When tested for in vitro antimicrobial activity on Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria and fungi (yeast Candida albicans and mold Aspergillus niger), the particles showed promising potential. [ABSTRACT FROM AUTHOR]

The present study evaluates the mold fungal resistance of newly developed loose-fill thermal insulation materials made of wheat straw, corn stalk and water reed. Three distinct techniques for the processing of raw materials were used: mechanical crushing (Raw, ≤20 mm), thermo-mechanical pulping (TMP) with 4% NaOH and steam explosion pulping (SEP). An admixture of boric acid (8%) and tetraborate (7%) was applied to all processed substrates due to their anti-fungal properties. The fourth sample group was prepared from SEP substrates without added fungicide (SEP*) as control. Samples from all treatments were separately inoculated by five different fungal species and incubated in darkness for 28 days at 28 °C and RH > 90%. The highest resistance to the colonization of mold fungi was achieved by TMP and SEP processing, coupled with the addition of boric acid and tetraborate, where molds infested only around 35% to 40% of the inoculated sample area. The lowest mold fungi resistance was detected for the Raw and SEP* samples, each ~75%; they were affected by rich amount of accessible nutrients, suggesting that boric acid and tetraborate additives alone did not prevent mold fungal growth as effectively as in combination with TMP and SEP treatments. Together, the achieved fungal colonization scores after combined fungicide and pulping treatments are very promising for the application of tested renewable materials in the future development of thermal insulation products. [ABSTRACT FROM AUTHOR]

Screening of Bacillus with antagonistic effects on paddy mold pathogens to provide strain resources for biological control of mold in Oryza sativa L. screening of Bacillus isolates antagonistic towards Aspergillus tubingensis from rhizosphere soil of healthy paddy; classification and identification of antagonistic strains by biological characteristics and 16S rDNA sequence analysis; transcriptome sequencing after RNA extraction from Bacillus-treated Aspergillus tubingensis; and extraction of inhibitory crude proteins of Bacillus by ammonium sulfate precipitation; inhibitory crude protein and Bacillus spp. were treated separately for A. tubingensis and observed by scanning electron microscopy (SEM). An antagonistic strain of Bacillus, named B7, was identified as Paenibacillus polymyxa by 16S rDNA identification and phylogenetic evolutionary tree comparison analysis. Analysis of the transcriptome results showed that genes related to secondary metabolite biosynthesis such as antifungal protein were significantly downregulated. SEM results showed that the mycelium of A. tubingensis underwent severe rupture after treatment with P. polymyxa and antifungal proteins, respectively. In addition, the sporocarp changed less after treatment with P. polymyxa, and the sporangium stalks had obvious folds. P. polymyxa B7 has a good antagonistic effect against A. tubingensis and has potential for biocontrol applications of paddy mold pathogens. [ABSTRACT FROM AUTHOR]

The biodegradation of building materials refers to the problem of loss of performance due to biological agents, mainly dry rot fungi, moulds (filamentous fungi), bacteria and insects. Biocorrosion not only leads to the damage and deterioration of building materials, but can also pose a direct threat to human health. Inorganic building materials are a difficult substrate for microorganisms because they need food sources for their metabolism. However, they become colonised by microorganisms. In this paper, the effect of mould fungi on the moisture content and structure of CEM I and CEM I cement–polymer mortars with a 5% polysiloxane latex admixture was analysed. The analysis was carried out after 15 months of exposure to the biological environment. It was found that the cementitious materials were susceptible to the corrosive environment in the form of the filamentous fungi Penicillium chrysogenum and Cladosporium herbarum. It was also found that, after 15 months of exposure to mould fungi, CEM I cementitious materials without admixtures were slightly less susceptible to mould fungi than CEM I with the addition of a 5% polysiloxane admixture. [ABSTRACT FROM AUTHOR]