Search

Large grain UO2 is considered as an accident tolerant fuel with great application potential due to its competitive advantage of good fission gas retention. In this paper, the influence of preparation parameters such as sintering atmosphere, mixing process, powder pretreatment and grain growth additives on the grain size of UO2 is systematically studied. The result shows that the factors mentioned above have different effects on the grain size of UO2. The grain growth of UO2 pellet sintered in oxidizing atmosphere is better than those in reducing atmosphere. The wet mixing process has a significant advantage over the dry mixing process. In addition, the powder pretreatment has little effect on grain growth while the influence of additives plays the main role. Large grain UO2 pellets with uniform grain size up to 150 μm are successfully prepared. Finally, the thermo-physical properties of the pellets are investigated.

In this article, a novel method to synthesize graphene quantum dots was developed via thermal treatment of crude graphite oxide (GO) in a dry and alkaline condition to cut the crude GO sheets into small graphene quantum dots (named as aGQDs). The aGQDs are nano-scale reduced graphene oxide pieces with the sizes around 5–10 nm. The aGQDs could disperse in water for their richment of oxygen-containing groups. The fluorescence properties were carefully investigated. The aGQDS aqueous solution shows a bright yellow-green fluorescence under the UV illumination. Besides, the uranyl ions show a strong fluorescence quenching effect on the a aGQD aqueous solution even at a low concentration (~10−7 M) compared with other common ions in natural water-body, which makes that these aGQDs could be applied as a chemosensor for detection of uranyl ions with good sensitivity and selectivity.

In this study, a novel signal-increase electrochemiluminescence (ECL) biosensor has been developed for the detection of glucose based on graphene quantum dot/glucose oxidase (GQD/GOx) on Ti foil. The proposed GQD with excellent ECL ability is synthesized through a green one-step strategy by the electrochemical reduction of graphene oxide quantum dot. Upon the addition of glucose, GOx can catalytically oxidize glucose and the direct electron transfer between the redox centre of GOx and the modified electrode also has been realized, which results in the bio-generated H2O2 for ECL signal increase in GQD and realizes the direct ECL detection of glucose. The signal-increase ECL biosensor enables glucose detection with high sensitivity reaching 5 × 10−6 mol l−1 in a wide linear range from 5 × 10−6 to 1.5 × 10−3 mol l−1. Additionally, the fabrication process of such GQD-based ECL biosensor is also suitable to other biologically produced H2O2 system, suggesting the possible applications in the sensitive detection of other biologically important targets (e.g. small molecules, protein, DNA and so on).