Search

Lignocellulosic biomass represents an excellent alternative to fossil fuels in terms of both energy production and raw material usage for a plethora of daily-use products. Organosolv pretreatment is a fractionation technique able to separate lignocellulosic biomass into individual streams of cellulose, hemicellulose, and lignin under controlled conditions. Sawdust, the by-product of sawmill processing of Picea abies wood, was the subject of our investigation in this work. The aim was to evaluate the effects of different parameters of the organosolv process of spruce sawdust on the yield of components and how this affects the enzymatic saccharification of cellulose. Sixteen distinct pretreatments were performed with ethanol concentrations of 50 and 60% v/v at 180 and 200 °C for 15 and 30 min. Half of the pretreatments contained 1% sulfuric acid as a catalyst, while the other half were acid-free. Thereafter, the effects of different variables on the yield of products were assessed and compared to determine the ideal pretreatment condition. The results showed that cellulose-rich pulps, with cellulose content as high as 55% were generated from an initial mass of 37.7% spruce sawdust with the reactor operating at 180 °C for 30 min using 60% ethanol and 1% sulfuric acid. With the pretreatments performed with the catalyst at 200 °C, hemicellulose was almost entirely removed from the pulps obtained. The recovered hemicellulose fraction was composed mainly of monomers achieving up to 10 g/100 g of biomass. Delignification values of up to 65.7% were achieved with this pretreatment technique. Fractionated lignin presented low levels of sugar and ashes contamination, with values as low as 1.29% w/w. Enzymatic saccharification of the pretreated pulps yielded 78% cellulose hydrolysis, with glucose release higher than 0.54 g/g of biomass, indicating the potential of the pulps to be applied in a fermentation process. [ABSTRACT FROM AUTHOR]

Metal nanoparticle synthesis via environmentally friendly methods is gaining interest for their potential advantages over conventional physico-chemical approaches. Herein, we propose a robust green synthesis route for lignin-modified silver nanoparticles, utilizing the recovery of lignin as a renewable raw material and exploring its application in valuable areas. Through a systematic approach combining UV-Vis spectroscopy with AAS and DLS, we identified repeatable and scalable reaction conditions in an aqueous solution at pH 11 for homogeneous silver nanoparticles with high uniformity. The TEM median sizes ranged from 12 to 15 nm with circularity between 0.985 and 0.993. The silver nanoparticles yield exceeded 0.010 mol L−1, comparable with traditional physico-chemical methods, with a minimal loss of silver precursor ranging between 0.5 and 3.9%. Characterization by XRD and XPS revealed the presence of Ag-O bonding involving lignin functional groups on the pure face-centered cubic structure of metallic silver. Moreover, the lignin-modified silver nanoparticles generated a localized thermal effect upon near-infrared laser irradiation (808 nm), potentially allowing for targeted applications in the biomedical field. Our study showcases the potential of lignin as a renewable reducing and capping agent for silver nanoparticle synthesis, addressing some shortcomings of green synthesis approaches and contributing to the development of suitable nanomaterials. [ABSTRACT FROM AUTHOR]

Carbonic anhydrase (CA) is considered an efficient enzyme for fermentation systems exhibiting a wide range of applications, enhancing both the efficacy and output of the fermentation process. The present study aimed to evaluate the production of acidogenic biohydrogen (bioH2) and volatile fatty acids (VFA) using forest residues as a renewable feedstock. Specifically, the study examined the integration of CA derived from Desulfovibrio vulgaris into the acidogenic fermentation (AF) process. The experimental procedure involved a cascade design conducted in two distinct phases. In phase I, the concentration of CA in the AF was systematically optimized, with glucose serving as the substrate. In phase II, three influential parameters (pH, pressurization with in situ generated gas and organic load) were evaluated on AF in association with optimized CA concentration from phase I. In phase II, glucose was replaced with renewable sugars obtained from forest residues after steam explosion pretreatment followed by enzymatic saccharification. The incorporation of CA in AF was found to be beneficial in steering acidogenic metabolites. Alkaline conditions (pH 8) promoted bioH2, yielding 210.9 mLH2 gCOD -1, while introducing CA further increased output to 266.6 mLH2 gCOD -1. This enzymatic intervention improved the production of bioH2 conversion efficiency (HCE) from 45.3% to 57.2%. Pressurizing the system accelerated VFA production with complete utilization of in situ produced H2 + CO2 compared to non-pressurized systems. Particularly, caproic acid production was improved under pressurized conditions which was accomplished by the targeted enrichment of chain-elongating bacteria in the mixed culture. The microbial diversity analysis showed the dominance of Firmicutes suggesting a significant degree of adaptation to the experimental contexts, leading to an enhanced production of acidogenic metabolites. [ABSTRACT FROM AUTHOR]

Advancements in biological wastewater treatment with sustainable and circularity approaches have a wide scope of application. Biological wastewater treatment is widely used to remove/recover organic pollutants and nutrients from a diverse wastewater spectrum. However, conventional biological processes face challenges, such as low efficiency, high energy consumption, and the generation of excess sludge. To overcome these limitations, integrated strategies that combine biological treatment with other physical, chemical, or biological methods have been developed and applied in recent years. This review emphasizes the recent advances in integrated strategies for biological wastewater treatment, focusing on their mechanisms, benefits, challenges, and prospects. The review also discusses the potential applications of integrated strategies for diverse wastewater treatment towards green energy and resource recovery, along with low-carbon fuel production. Biological treatment methods, viz., bioremediation, electro-coagulation, electro-flocculation, electro-Fenton, advanced oxidation, electro-oxidation, bioelectrochemical systems, and photo-remediation, are summarized with respect to non-genetically modified metabolic reactions. Different conducting materials (CMs) play a significant role in mass/charge transfer metabolic processes and aid in enhancing fermentation rates. Carbon, metal, and nano-based CMs hybridization in different processes provide favorable conditions to the fermentative biocatalyst and trigger their activity towards overcoming the limitations of the conventional process. The emerging field of nanotechnology provides novel additional opportunities to surmount the constraints of conventional process for enhanced waste remediation and resource valorization. Holistically, integrated strategies are promising alternatives for improving the efficiency and effectiveness of biological wastewater treatment while also contributing to the circular economy and environmental protection. [ABSTRACT FROM AUTHOR]

The present research investigated the effect of organosolv pretreatment on two species of salt-tolerant Salicornia spp. biomass, Salicornia dolichostachya and Salicornia ramosissima, for increasing biomethane production through anaerobic digestion. The final biomethane yield of de-juiced green fibers of Salicornia spp. from wet fractionation increased by 23–28% after organosolv treatment. The highest methane yield of about 300 mL-CH4/gVS was found after organosolv treatment with 60% v/v ethanol solution at 200 °C for 30 min, or at 180 °C for 30 or 60 min treatment time. Furthermore, the methane production rate increased significantly, reducing the time until 95% of the final methane yield was reached from 20 days to 6–10 days for the organosolv-treated biomass. This research shows that the process of anaerobic digestion of halophyte biomass benefits from cascade processing of Salicornia fibers in a biorefinery framework by sequential wet and organosolv fractionation for full utilization of halophytic biomass. [ABSTRACT FROM AUTHOR]