Search

We report silicon nanowire (SiNW) growth with a novel Cu-In bimetallic catalyst using a plasma-enhanced chemical vapor deposition (PECVD) method. We study the structure of the catalyst nanoparticles (NPs) throughout a two-step process that includes a hydrogen plasma pre-treatment at 200 °C and the SiNW growth itself in a hydrogen-silane plasma at 420 °C. We show that the H2-plasma induces a coalescence of the Cu-rich cores of as-deposited thermally evaporated NPs that does not occur when the same annealing is applied without plasma. The SiNW growth process at 420 °C induces a phase transformation of the catalyst cores to Cu7In3; while a hydrogen plasma treatment at 420 °C without silane can lead to the formation of the Cu11In9 phase. In situ transmission electron microscopy experiments show that the SiNWs synthesis with Cu-In bimetallic catalyst NPs follows an essentially vapor-solid–solid process. By adjusting the catalyst composition, we manage to obtain small-diameter SiNWs—below 10 nm—among which we observe the metastable hexagonal diamond phase of Si, which is predicted to have a direct bandgap.

The optimized design of a photonic platform based on a nanowire light emitting diode (LED) and a nanowire photodetector connected with a waveguide is proposed. The light coupling efficiency from the LED to the detector is optimized as a function of the geometrical parameters of the system using the finite difference time domain simulation tool Lumerical. Starting from a design reported in the literature with a coupling efficiency of only 8.7%, we propose an optimized photonic platform with efficiency reaching 65.5%.

We study light trapping and parasitic losses in hydrogenated amorphous silicon thin film solar cells fabricated by plasma-enhanced chemical vapor deposition on nanostructured back reflectors. The back reflectors are patterned using polystyrene assisted lithography. By using O2 plasma etching of the polystyrene spheres, we managed to fabricate hexagonal nanostructured back reflectors. With the help of rigorous modeling, we study the parasitic losses in different back reflectors, non-active layers, and last but not least the light enhancement effect in the silicon absorber layer. Moreover, simulation results have been checked against experimental data. We have demonstrated hexagonal nanostructured amorphous silicon thin film solar cells with a power conversion efficiency of 7.7% and around 34.7% enhancement of the short-circuit current density, compared with planar amorphous silicon thin film solar cells.

The radial junction (RJ) architecture has proven beneficial for the design of a new generation of high performance thin film photovoltaics. We herein carry out a comprehensive modeling of the light in-coupling, propagation and absorption profile within RJ thin film cells based on an accurate set of material properties extracted from spectroscopic ellipsometry measurements. This has enabled us to understand and evaluate the impact of varying several key parameters on the light harvesting in radially formed thin film solar cells. We found that the resonance mode absorption and antenna-like light in-coupling behavior in the RJ cell cavity can lead to a unique absorption distribution in the absorber that is very different from the situation expected in a planar thin film cell, and that has to be taken into account in the design of high performance RJ thin film solar cells. When compared to the experimental EQE response of real RJ solar cells, this modeling also provides an insightful and powerful tool to resolve the wavelength-dependent contributions arising from individual RJ units and/or from strong light trapping due to the presence of the RJ cell array. [ABSTRACT FROM AUTHOR]

The fabrication of arrays of silicon nanowires (Si NWs) with well-defined surface coverage using the vapor–liquid–solid process requires a good control of the density and size distribution for the metal catalyst. We report on a cost-effective bottom-up approach to produce Si NWs by a low-temperature deposition technology using plasma-enhanced chemical vapor deposition and tin dioxide (SnO2) nanoparticles as the source of tin catalyst. This strategy offers a straightforward method to select specific particle sizes by conventional colloidal techniques, and to tune the surface coverage using a polyelectrolyte layer to efficiently immobilize the particles on the substrate by electrostatic grafting. After a further step of reduction into tin metal droplets using hydrogen plasma treatment, the catalyst particles are used for the growth of Si NWs. This approach allows the prodcution of controlled Si NWs arrays which can be used as a template for radial junction thin film solar cells. [ABSTRACT FROM AUTHOR]

Solar cells with radial junctions based on silicon nanowires were investigated using correlative microscopy in order to determine the nature and origin of previously reported inhomogeneity of their electronic properties. For correlating various microscopy techniques, we have prepared sets of three Vickers type nanoindents arranged in a right triangle with 20 µm sides as marks of local frame of reference. Due to the shape of the indents (squares with 4 µm sides and clear diagonals) the position of the marks can be located with high precision by various microscopes. This makes it possible to correlate the results from scanning electron microscopy, Kelvin probe force microscopy and conductive atomic force microscopy techniques on the same place of the sample, with a precision down to individual nanowires, obtaining new information about the electronic inhomogeneity. Using the conductive AFM we analyzed the growth process of silicon nanowires step by step in order to find possible origins of the local (photo)current variations. [ABSTRACT FROM AUTHOR]

Incorporation of nanostructures is a recent trend in the photovoltaic community, aimed at improving light absorption and consequently cell efficiency. In this regard, semiconductor nanowires provide an attractive research platform for a new generation of cost-effective and efficient solar cells. Thanks to their unique geometry, silicon nanowires enhance light trapping and anti-reflection effects by means of multiple scattering between individual nanowires, and by coupling the light into confined eigenmodes over a broad range of the solar spectrum. Moreover, radial junction solar cells built around nanowires decouple the light absorption and carrier collection directions, which allows for a higher internal field and better carrier collection. Thus, arrays of radial junction solar cells bring advantages of high efficiency with reduced material amount. This is particularly attractive for devices based on hydrogenated amorphous and microcrystalline silicon thin films. In this paper, after reviewing different approaches to fabricate silicon nanowires, we focus on nanowires grown using the plasma-assisted vapour–liquid–solid method because of the simplicity and compatibility with current silicon thin-film technology. Their application to a-Si : H based radial junction solar cells has already resulted in ∼8% of stable devices with an absorber layer thickness of only 100 nm. Moreover, current challenges and perspectives such as the use of a microcrystalline silicon absorber are also reviewed. [ABSTRACT FROM AUTHOR]

Hydrogen plasma reduction of fluorine doped tin oxide is a beneficial method to form tin nanodroplets on the sample surface directly in the plasma-enhanced chemical vapor deposition reactor. The formation of catalyst droplets is a crucial initial step for vapor-liquid-solid growth of silicon nanowires for radial junction solar cells and solar fuel cell technology. We present an original optical model which allows us to trace the formation process on fluorine doped tin oxide on soda-lime glass substrate from the in situ data and is in a good agreement with the spectroscopic ellipsometry data measured before and during the reduction process. The model reproduces well the phase shift introduced by a transition double layer in fluorine doped tin oxide which acts as a barrier against the sodium diffusion. Furthermore, we study the process of tin reduction from fluorine doped tin oxide in a real time and compare estimated amount of produced metallic tin with images from scanning electron microscopy.The proposed approach is very important for in situ real-time monitoring of the one-pump-down fabrication process used to grow nanowires and form radial junction devices.