Search

The use of Process Analytical Technology tools coupled with chemometrics has been shown great potential for better understanding and control of mammalian cell cultivations through real‐time process monitoring. In‐line Raman spectroscopy was utilized to determine the glucose concentration of the complex bioreactor culture medium ensuring real‐time information for our process control system. This work demonstrates a simple and fast method to achieve a robust partial least squares calibration model under laboratory conditions in an early phase of the development utilizing shake flask and bioreactor cultures. Two types of dynamic feeding strategies were accomplished where the multi‐component feed medium additions were controlled manually and automatically based on the Raman monitored glucose concentration. The impact of these dynamic feedings was also investigated and compared to the traditional bolus feeding strategy on cellular metabolism, cell growth, productivity, and binding activity of the antibody product. Both manual and automated dynamic feeding strategies were successfully applied to maintain the glucose concentration within a narrower and lower concentration range. Thus, besides glucose, the glutamate was also limited at low level leading to reduced production of inhibitory metabolites, such as lactate and ammonia. Consequently, these feeding control strategies enabled to provide beneficial cultivation environment for the cells. In both experiments, higher cell growth and prolonged viable cell cultivation were achieved which in turn led to increased antibody product concentration compared to the reference bolus feeding cultivation. [ABSTRACT FROM AUTHOR]

Homogeneous ultralow-dose (30 mg) tablets were prepared from perfectly free-flowing granules manufactured by continuous Twin-Screw Wet Granulation. The gravimetrically fed mixture of lactose and potato starch of low particle size was successfully agglomerated and the size enlargement technology proved to be very robust. Since the incorporated drug was dissolved in ethanolbased granulation liquid, the resulting homogeneity largely depended on the dosing of the applied liquid administering units. A peristaltic pump generated higher deviation of the drug content in tablets (Relative Standard Deviation (RSD): 7.7%) compared to a syringe pump (RSD: 2.3%) or a piston pump (RSD: 4.6%). This is due to the pulsation of the liquid flow generated by the peristaltic pump according to the real-time measured mass of the fed liquid. A good correlation was found between the RSD of the liquid mass flow (calculated from the recorded masses) and the RSD of the drug content. Based on the results, the goodness of Content Uniformity, as the most relevant critical quality attribute of low-dose products, was determined by the characteristics of the applied dosing units. The feeding characteristic of the different pumps could be easily measured by the introduced balance-based method and therefore, the applicability of the pumps could be evaluated. [ABSTRACT FROM AUTHOR]

The present paper reports the first dynamic image analysis-based feedback control of continuous twin-screw wet granulation process. Granulation of the blend of lactose and starch was selected as a model process. The size and size distribution of the obtained particles were successfully monitored by a process camera coupled with an image analysis software developed by the authors. The validation of the developed system showed that the particle size analysis tool can determine the size of the granules with an error of less than 5 µm. The next step was to implement real-time feedback control of the process by controlling the liquid feeding rate of the pump through a PC, based on the real-time determined particle size results. After the establishment of the feedback control, the system could correct different real-life disturbances, creating a Process Analytically Controlled Technology (PACT), which guarantees the real-time monitoring and controlling of the quality of the granules. In the event of changes or bad tendencies in the particle size, the system can automatically compensate the effect of disturbances, ensuring proper product quality. This kind of quality assurance approach is especially important in the case of continuous pharmaceutical technologies. [ABSTRACT FROM AUTHOR]

[Display omitted] The present paper serves as a demonstration how an in-line PAT tool can be used for rapid and efficient process development in a fully continuous powder to granule line consisting of an interconnected twin-screw wet granulator, vibrational fluid bed dryer, and a regranulating mill. A new method was investigated for the periodic in-line particle size measurement of high mass flow materials to obtain real-time particle size data of the regranulated product. The system utilises a vibratory feeder with periodically altered feeding intensity in order to temporarily reduce the mass flow of the material passing in front of the camera. This results in the drastic reduction of particle overlapping in the images, making image analysis a viable tool for the in-line particle size measurement of high mass-flow materials. To evaluate the performance of the imaging system, the effect of several milling settings and the liquid-to-solid ratio was investigated on the product's particle size in the span of a few hours. The particle sizes measured with the in-line system were in accordance with the expected trends as well as with the results of the off-line reference particle size measurements. Based on the results, the in-line imaging system can serve as a PAT tool to obtain valuable real-time information for rapid process development or quality assurance. [ABSTRACT FROM AUTHOR]

In pharmaceutical sciences, visual inspection is one of the oldest methods used for description in pharmacopeias and is still an important part of the characterization and qualification of active ingredients, excipients, and dosage forms. With the development of technology, it is now also possible to take images of various pharmaceutical dosage forms with different imaging methods in a size range that is hardly visible or completely invisible to the human eye. By analyzing high-quality designs, physicochemical processes can be understood, and the results can be used even in the optimization of the composition of the dosage form and in the development of its production. The present study aims to show some of the countless ways image analysis can be used in the manufacturing and quality assessment of different dosage forms. This summary also includes measurements and an evaluation of, amongst others, a less studied dosage form, medicated foams. [ABSTRACT FROM AUTHOR]

The present paper reports a thorough continuous powder blending process design of acetylsalicylic acid (ASA) and microcrystalline cellulose (MCC) based on the Process Analytical Technology (PAT) guideline. A NIR-based method was applied using multivariate data analysis to achieve in-line process monitoring. The process dynamics were described with residence time distribution (RTD) models to achieve deep process understanding. The RTD was determined using the active pharmaceutical ingredient (API) as a tracer with multiple designs of experiment (DoE) studies to determine the effect of critical process parameters (CPPs) on the process dynamics. To achieve quality control through material diversion from feeding data, soft sensor-based process control tools were designed using the RTD model. The operation block model of the system was designed to select feasible experimental setups using the RTD model, and feeder characterizations as digital twins, therefore visualizing the output of theoretical setups. The concept significantly reduces the material and instrumental costs of process design and implementation. [ABSTRACT FROM AUTHOR]

The present paper reports the first monitoring and control of ultra-low dose powder feeding using a camera image-based mass flow measurement system. Caffeine was fed via a single-screw microfeeder as a model active pharmaceutical ingredient (API). The mass, mass flow and sizes of the particles were successfully monitored in real-time by the developed videometric system consisting of a high-speed process camera coupled with an image analysis software. The system was also tested in feedback control mode to automatically reach the desired mass flow values by adjusting the feeder speed based on the mass flow measured by the image analysis system. Based on these features, the developed videometric system can serve as a multi-purpose PAT-tool and can provide valuable real-time information about the process which is indispensable for modern continuous pharmaceutical manufacturing. [ABSTRACT FROM AUTHOR]

[Display omitted] This paper presents new machine vision–based methods for indirect real-time quantification of ultralow drug content during continuous twin-screw wet granulation and tableting. Granulation was performed with a solution containing carvedilol (CAR) as API in the ultralow dose range (0.05 w/w% in the granule) and the addition of riboflavin (RI) as a coloured tracer. An in-line calibration in the range of 0.047–0.058 w/w% was prepared for the measurement of CAR concentration using colour analysis (CA) and particle size analysis (PSA), and the validation with HPLC resulted in respective relative errors of 2.62% and 2.30% showing great accuracy. To improve the technique, a second in-line calibration was conducted in a broader CAR concentration range of 0.039–0.063 w/w% utilizing only half the amount of RI (0.045 w/w%), while doubling the output of the granulation line to 2 kg/h, producing a relative error of 4.51% and 4.29%, respectively. Finally, it was shown that the CA technique can also be carried on to monitor the CAR content of tablets in the 42–62 μg dose range with a relative error of 5.20%. Machine vision was proven to be a potent indirect method for the in-line, determination and monitoring of ultralow API content during continuous manufacturing. [ABSTRACT FROM AUTHOR]

The Process Analytical Technology (PAT) and the Quality-by-Design (QbD) approaches can efficiently facilitate the shift to the desired continuous manufacturing and real time release testing (RTRT). By this, it is vital to develop new, in-line analytical methods which fulfil the pharmaceutical requirements. The fast-developing digital imaging-based machine vision systems can provide revolutionary solutions not just in the automotive industry but in the pharmaceutical technology, as well. This study aimed to explore the capabilities of UV/VIS-based machine vision in tablet inspection as a PAT tool for the determination of compression force and crushing strength, drug content and drug distribution in tablets using meloxicam a yellow model drug. In the case of determining the compression force and crushing strength, the application of multivariate wavelet texture analysis (MWTA) based models provided relatively low prediction errors. To predict the drug content of meloxicam tablets CIELAB or RGB colorspace based algorithms were successfully developed and validated. UV/VIS imaging was also used to map the particle size distribution and spatial distribution of meloxicam, the results were compared to chemical maps obtained by Raman microscopy. Digital imaging combined with multivariate data analysis might be a valuable, high throughput, in-line PAT tool for automated inspection of pharmaceutical tablets. [ABSTRACT FROM AUTHOR]

[Display omitted] • Vial filling proved to be possible with electrospun material. • Different methods were compared for milling of electrospun materials. • Correlations were observed between the material properties and feeding responses. • A vibratory feeder is suitable for automatic vial filling with low mass variance. • Reconstitution dosage forms can be prepared from electrospun materials. The present paper reports the powder filling of milled electrospun materials in vials, which contained voriconazole and sulfobutylether-β-cyclodextrin. High-speed electrospinning was used for the production of the fibrous sample, which was divided into 6 parts. Each portion was milled using different milling methods and sizes of sieves to investigate whether the milling influences the powder and filling properties. Bulk and tapped density tests, laser diffraction and angle of repose measurements were applied to characterize the milled powders, while a vibratory feeder was used for the feeding experiments. The correlation between the material property descriptors and the feeding responses was investigated by multivariate data analysis. Based on the results, three samples were chosen for the vial filling, which was accomplished with 3400 mg electrospun material containing 200 mg voriconazole, representative of the commercial product. The feed rate was set to fit the 240 g/h production rate of the electrospinning and the relative standard deviation of three repeated vial filling was determined to see the accuracy of the process. This research shows that by applying a suitable milling method it is possible to process electrospun fibers to a powder, which can be filled into vials and used as reconstitution dosage forms. [ABSTRACT FROM AUTHOR]

• Continuous feeding, blending and tableting of electrospun fibers was accomplished. • In-line monitoring of the amorphous solid dispersion content was performed. • The prepared tablets passed the USP <905> content uniformity test. • Continuous manufacturing of milled electrospun materials to tablets proved feasible. Electrospinning is a technology for manufacture of nano- and micro-sized fibers, which can enhance the dissolution properties of poorly water-soluble drugs. Tableting of electrospun fibers have been demonstrated in several studies, however, continuous manufacturing of tablets have not been realized yet. This research presents the first integrated continuous processing of milled drug-loaded electrospun materials to tablet form supplemented by process analytical tools for monitoring the active pharmaceutical ingredient (API) content. Electrospun fibers of an amorphous solid dispersion (ASD) of itraconazole and poly(vinylpyrrolidone- co -vinyl acetate) were produced using high speed electrospinning and afterwards milled. The milled fibers with an average fiber diameter of 1.6 ± 0.9 µm were continuously fed with a vibratory feeder into a twin-screw blender, which was integrated with a tableting machine to prepare tablets with ~ 10 kN compression force. The blend of fibers and excipients leaving the continuous blender was characterized with a bulk density of 0.43 g/cm3 and proved to be suitable for direct tablet compression. The ASD content, and thus the API content was determined in-line before tableting and at-line after tableting using near-infrared and Raman spectroscopy. The prepared tablets fulfilled the USP <905> content uniformity requirement based on the API content of ten randomly selected tablets. This work highlights that combining the advantages of electrospinning (e.g. less solvent, fast and gentle drying, low energy consumption, and amorphous products with high specific surface area) and the continuous technologies opens a new and effective way in the field of manufacturing of the poorly water-soluble APIs. [Display omitted] [ABSTRACT FROM AUTHOR]

The aim of this work was to develop a PAT platform consisting of four complementary instruments for the characterization of electrospun amorphous solid dispersions with meloxicam. The investigated methods, namely NIR spectroscopy, Raman spectroscopy, Colorimetry and Image analysis were tested and compared considering the ability to quantify the active pharmaceutical ingredient and to detect production errors reflected in inhomogeneous deposition of fibers. Based on individual performance the calculated RMSEP values ranged between 0.654% and 2.292%. Mid-level data fusion consisting of data compression through latent variables and application of ANN for regression purposes proved efficient, yielding an RMSEP value of 0.153%. Under these conditions the model could be validated accordingly on the full calibration range. The complementarity of the PAT tools, demonstrated from the perspective of captured variability and outlier detection ability, contributed to model performance enhancement through data fusion. To the best of the author's knowledge, this is the first application of data fusion in the field of PAT for efficient handling of big-analytical-data provided by high-throughput instruments. [ABSTRACT FROM AUTHOR]