Search

We report Global Positioning System (GPS) measurements of postseismic deformation following the 2015 Mw7.8 Gorkha (Nepal) earthquake, including previously unpublished data from 13 continuous GPS stations installed in southern Tibet shortly after the earthquake. We use variational Bayesian Independent Component Analysis (vbICA) to extract the signal of postseismic deformation from the GPS time series, revealing a broad displacement field extending >150 km northward from the rupture. Kinematic inversions and dynamic forward models show that these displacements could have been produced solely by afterslip on the Main Himalayan Thrust (MHT) but would require a broad distribution of afterslip extending similarly far north. This would require the constitutive parameter (a − b)σ to decrease northward on the MHT to ≤0.05 MPa (an extreme sensitivity of creep rate to stress change) and seems unlikely in light of the low interseismic coupling and high midcrustal temperatures beneath southern Tibet. We conclude that the northward reach of postseismic deformation more likely results from distributed viscoelastic relaxation, possibly in a midcrustal shear zone extending northward from the seismogenic MHT. Assuming a shear zone 5–20 km thick, we estimate an effective shear‐zone viscosity of ~3·1016–3·1017 Pa·s over the first 1.12 postseismic years. Near‐field deformation can be more plausibly explained by afterslip itself and implies (a − b)σ ~ 0.5–1 MPa, consistent with other afterslip studies. This near‐field afterslip by itself would have re‐increased the Coulomb stress by ≥0.05 MPa over >30% of the Gorkha rupture zone in the first postseismic year, and deformation further north would have compounded this reloading. Key Points: New GPS data show that postseismic deformation of the 2015 Mw7.8 Gorkha (Nepal) earthquake extended far northward into southern TibetKinematic and dynamic models suggest that the northward reach of deformation likely reflects the influence of viscoelastic relaxationAfterslip likely dominated postseismic deformation in the near field, transferring stress back to the (relocked) Gorkha rupture zone [ABSTRACT FROM AUTHOR]

The Haiyuan fault is a major left‐lateral strike‐slip fault at the boundary between northeast Tibet and the Gobi platform. Combining measurements of offset alluvial terraces with 10Be‐26Al cosmogenic radionuclides dating, we bracket the late Quaternary slip rate along the Hasi Shan fault section (37°00′N, 104°25′E) of the Haiyuan fault. At our reference site, terrace‐riser offsets for five successive terraces range from ~5 to ~200 m, and associated cosmogenic radionuclide ages range from 9 ± 3 to 44 ± 7 kyr. These measurements yield a geological slip rate between 2.7 and 3.0 mm/year. Extending the offset measurements to the entire Hasi Shan front, it yields a slip rate of 3.2 ± 0.2 mm/year over the last ~50 kyr. Our rate is consistent with the lower estimates of other long‐term rates of 4 to 5 mm/year, as well as with geodetic rates of 3 to 5 mm/year, determined in the same area. About 150 km farther west, however, Holocene terraces and moraines offsets have suggested higher slip rate values, between 6 and 15 mm/year. We interpret such discrepancy between rates determined along the western section of the Haiyuan fault and rates determined in the Hasi Shan section as being related to the complex geometry of the Haiyuan fault system along its eastern part, with several active strands moving at the same time and resulting in distributed slip among several sections of the fault system. Key Points: Slip rate along the Hasi Shan section of the Haiyuan fault is determined from numerous offsets and cosmogenic exposure dates over a period of 50,000 yearsThe Hasi Shan fault strand horizontal slip rate is about 3.2 mm/year; this rate is stable over 50,000 years; the uplift rate is about 0.5 mm/yearCombining slip rate for the Hasi Shan strand and all subparallel stands yields a slip rate of 5 to 7 mm/year for the Haiyuan fault system [ABSTRACT FROM AUTHOR]

Abstract: The M s 8.0, Wenchuan earthquake, which devastated the mountainous western rim of the Sichuan basin in central China, produced a surface rupture over 200 km-long with oblique thrust/dextral slip and maximum scarp heights of ~10 m. It thus ranks as one of the world''s largest continental mega-thrust events in the last 150 yrs. Field investigation shows clear surface breaks along two of the main branches of the NE-trending Longmen Shan thrust fault system. The principal rupture, on the NW-dipping Beichuan fault, displays nearly equal amounts of thrust and right-lateral slip. Basin-ward of this rupture, another continuous surface break is observed for over 70 km on the parallel, more shallowly NW-dipping Pengguan fault. Slip on this latter fault was pure thrusting, with a maximum scarp height of ~3.5 m. This is one of the very few reported instances of crustal-scale co-seismic slip partitioning on parallel thrusts. This out-of-sequence event, with distributed surface breaks on crustal mega-thrusts, highlights regional, ~EW-directed, present day crustal shortening oblique to the Longmen Shan margin of Tibet. The long rupture and large offsets with strong horizontal shortening that characterize the Wenchuan earthquake herald a re-evaluation of tectonic models anticipating little or no active shortening of the upper crust along this edge of the plateau, and require a re-assessment of seismic hazard along potentially under-rated active faults across the densely populated western Sichuan basin and mountains. [Copyright &y& Elsevier]

High-elevation, low-relief surfaces are widespread in many mountain belts. However, the origin of these surfaces has long been debated. In particular, the southeast Tibetan Plateau has extensive low-relief surfaces perched above deep valleys and in the headwaters of three of the world's largest rivers (Salween, Mekong, and Yangtze Rivers). Various geologic data and geodynamic models show that many mountain belts grow first to a certain height and then laterally in an outward propagation sequence. By translating this information into a kinematic propagating uplift function in a landscape evolution model, we propose that the high-elevation, low-relief surfaces in the southeast Tibetan Plateau are simply a consequence of mountain growth and do not require a special process to form. The propagating uplift forms an elongated river network geometry with broad high-elevation, low-relief headwaters and interfluves that persist for tens of millions of years, consistent with the observed geochronology. We suggest that the low-relief interfluves can be long-lived because they lack the drainage networks necessary to keep pace with the rapid incision of the large main-stem rivers. The propagating uplift also produces spatial and temporal exhumation patterns and river profile morphologies that match observations. Our modeling therefore reconciles geomorphic observations with geodynamic models of uplift of the southeast Tibetan Plateau, and it provides a simple mechanism to explain the low-relief surfaces observed in several mountain belts on Earth. [ABSTRACT FROM AUTHOR]

The deformation mode of the Tibetan Plateau is of crucial importance for understanding its construction and extrusion processes, as well as for the assessment of regional earthquake potential. Block motion and viscous flow models have been proposed to describe the deformation field but are not fully supported by modern geophysical observations. The 2021 Mw 7.4 Maduo earthquake, which occurred inside the Songpan-Ganzi terrane (SGT) in central-east Tibet, provides a chance to evaluate the associated deformation mode of the region. We conduct a joint inversion for this earthquake and resolve a bilateral rupture process, which is characterized by super- and subshear rupture velocities, respectively. We interpret this distinct rupture behavior to be the result of the respective slip concentration depths of the two ruptured segments. We analyze geological, seismic, and geodetic evidence and find that the SGT upper crust shows distributed shear deformation and distinct transverse anisotropy, which are associated with folded structures originating from compression of the paleo-Tethys ocean accretional prism realigned by following shear deformation. The SGT receives lateral shear loading from its NS boundary and accommodates a right-step sinistral motion across the terrane boundary faults. The unique tectonic setting of the SGT defines locations and behaviors of internal faulting and strong earthquakes such as the 2021 Maduo earthquake, with the latter occurring on slow-moving faults at intervals of several thousands of years.

Using 3-year Sentinel-1 C-band synthetic aperture radar (SAR) data, we observed prominent ground subsidence around the construction site of the Milashan Tunnel, which is on top of the northern Sangri-Cuona Rift (SCR) in southern Tibet. The most deformed area extends ∼7 km in the north-south direction and ∼6 km in the east-west direction, with a peak subsidence rate of over 10 mm/a in the line of sight direction of both the descending and ascending satellites. Aside from the long-term ground subsidence arising directly from underground water outflow and rock excavation, a regional aseismic fault slip episode is also evident. The aseismic slip event began in May 2016 and ended in July 2016. The surface aseismic displacements can be explained by normal faulting with mainly down-dip movement and a modest right-lateral strike-slip component on a nearly north-south trending fault. The aseismic deformation triggered by the Milashan Tunnel construction demonstrates the sensitive response of crustal-scale tectonics to human activity, which poses high seismic hazards for the heavily populated region., (Copyright © 2018 Science China Press. Published by Elsevier B.V. All rights reserved.)

In their Comment, Zeitler et al. do not challenge our results or interpretation. Our study does not disprove coupling between tectonic uplift and erosion but suggests that this coupling cannot be the sole explanation of rapid uplift in the Himalayan syntaxes., (Copyright © 2015, American Association for the Advancement of Science.)

The Himalayan mountains are dissected by some of the deepest and most impressive gorges on Earth. Constraining the interplay between river incision and rock uplift is important for understanding tectonic deformation in this region. We report here the discovery of a deeply incised canyon of the Yarlung Tsangpo River, at the eastern end of the Himalaya, which is now buried under more than 500 meters of sediments. By reconstructing the former valley bottom and dating sediments at the base of the valley fill, we show that steepening of the Tsangpo Gorge started at about 2 million to 2.5 million years ago as a consequence of an increase in rock uplift rates. The high erosion rates within the gorge are therefore a direct consequence of rapid rock uplift., (Copyright © 2014, American Association for the Advancement of Science.)

Large [moment magnitude (M(w)) ≥ 7] continental earthquakes often generate complex, multifault ruptures linked by enigmatic zones of distributed deformation. Here, we report the collection and results of a high-resolution (≥nine returns per square meter) airborne light detection and ranging (LIDAR) topographic survey of the 2010 M(w) 7.2 El Mayor-Cucapah earthquake that produced a 120-kilometer-long multifault rupture through northernmost Baja California, Mexico. This differential LIDAR survey completely captures an earthquake surface rupture in a sparsely vegetated region with pre-earthquake lower-resolution (5-meter-pixel) LIDAR data. The postevent survey reveals numerous surface ruptures, including previously undocumented blind faults within thick sediments of the Colorado River delta. Differential elevation changes show distributed, kilometer-scale bending strains as large as ~10(3) microstrains in response to slip along discontinuous faults cutting crystalline bedrock of the Sierra Cucapah.