Search

Aortic valve disease (AVD) often coexists with coronary artery disease (CAD), but whether and how the two diseases are correlated remains poorly understood. In this study, a zero–three dimensional (0-3D) multi-scale modeling method was developed to integrate coronary artery hemodynamics, aortic valve dynamics, coronary flow autoregulation mechanism, and systemic hemodynamics into a unique model system, thereby yielding a mathematical tool for quantifying the influences of aortic valve stenosis (AS) and aortic valve regurgitation (AR) on hemodynamics in large coronary arteries. The model was applied to simulate blood flows in six patient-specific left anterior descending coronary arteries (LADs) under various aortic valve conditions (i.e., control (free of AVD), AS, and AR). Obtained results showed that the space-averaged oscillatory shear index (SA-OSI) was significantly higher under the AS condition but lower under the AR condition in comparison with the control condition. Relatively, the overall magnitude of wall shear stress was less affected by AVD. Further data analysis revealed that AS induced the increase in OSI in LADs mainly through its role in augmenting the low-frequency components of coronary flow waveform. These findings imply that AS might increase the risk or progression of CAD by deteriorating the hemodynamic environment in coronary arteries. [ABSTRACT FROM AUTHOR]

Corneal collagen cross-linking (CXL) treatment can restore vision in patients suffering from keratoconus and corneal injury, by improving the mechanical properties of the cornea. The correlation between ultraviolet-A (UVA) irradiant energies of standard CXL (SCXL) and corneal visco-hyperelastic mechanical behavior remains unknown. In this study, SCXL with four different UVA irradiant energy doses (0–5.4 J/cm2) were administered as part of quantitative treatments of corneal stromal lenticules extracted from young myopic patients via small incision lenticule extraction (SMILE) corneal refractive surgery. Double-strip samples with symmetric geometries were cut simultaneously for SCXL treatment and non-treated control. First, 40 pairs of strips were loaded to failure to assess the mechanical parameters of the material. Then, another 40 pairs were tested using a special uniaxial tensile test including quasi-static loading–unloading, instantaneous loading, and stress relaxation, to determine the visco-hyperelastic mechanical behavior. Upon combining the collagen fibril crimping constitutive model with the quasi-linear viscoelastic model, it was observed that with increasing UVA energy dose, the corneal strength and hyperelastic stiffness were significantly enhanced, while the maximum stretch and viscosity of the cornea were significantly reduced. Considering the quantitative analysis of SCXL and the rehabilitation prediction of keratoconus treatment, the results clarify the biomechanical behavior of human corneal stroma in SCXL clinical surgery. This study quantitatively analyzes the improvement in the biomechanical properties of young central corneal stroma, due to SCXL treatment with different energies. Furthermore, the correlation between the hyper-viscoelastic mechanical parameters and UVA irradiant energy doses of SCXL are clarified. The contribution of this study fills the knowledge gap of the CXL on corneal biomechanics. It can not only clarify this mechanism better but also assist with guiding SCXL surgery for individualized patient corneas. Image, graphical abstract [ABSTRACT FROM AUTHOR]

Recently, elemental doping has proven to be an efficient method to improve the electrochemical performance of nanomaterials. In this work, we successfully synthesized Ni 1-x Co x MoO 4 with tunable morphologies through Co-doping by a facile chemical co-precipitation method, among which Ni 0.85 Co 0.15 MoO 4 displays an excellent specific capacitance (1301 F g−1 at 1 A g−1), which is higher than NiMoO 4 electrode (1050.4 F g−1 at 1 A g−1) and Ni 0.7 Co 0.3 MoO 4 electrode (755.2 F g−1 at 1 A g−1). In addition, Ni 0.85 Co 0.15 MoO 4 electrode shows excellent cycling stability with 86% retention of its original capacitance after 3000 cycles. Additionally, an asymmetric supercapacitor (ASC) device can be fabricated using Ni 0.85 Co 0.15 MoO 4 /nickel foam (Ni 0.85 Co 0.15 MoO 4 /NF) as positive electrode and active carbon/nickel foam (AC/NF) as negative electrode. The as-fabricated ASC achieves a high energy density of 37.26 Wh kg−1 at the power density of 400 W kg−1, highlighting its potential application for the efficient energy storage devices. Image 1 • This work proposed a facile chemical co-precipitation method for the synthesis of Ni 1-x CoxMoO 4 with tunable morphologies. • Different morphologies of Ni 1-x Co x MoO 4 were obtained by adjusting the Co doping ratio. • The Ni 0.85 Co 0.15 MoO 4 electrode exhibits excellent specific capacitance of 1301 F g−1 at 1 A g−1. [ABSTRACT FROM AUTHOR]

In this study, we established an experimental human corneal stroma model of simulated cornea tissue composed of thin anterior cornea strips layers obtained from small incision lenticular extraction (SMILE) surgery. We investigated the biomechanical effect of ultraviolet-A- riboflavin cross-linking at different depths of corneal stroma model and correlated it with stromal microstructural changes examined by transmission electron microscopy (TEM). Corneal strips were harvested from fresh human corneal lenticules obtained after SMILE surgery. Experimental models (n = 34) were established by superimposing the corneal lenticule strips until their thickness reached close to 500 μm. Corneal cross-linking (CXL) was performed subsequently using standard or accelerated protocol. Elasticity and viscosity were quantified using stress-strain extensometer. TEM was used to visualize the collagen fiber diameter and interfibrillar spacing. The relative change in Young's modulus (rel. ΔE) decreased nonlinearly with increasing stromal depth both in the standard and accelerated groups. Compared to the sham controls, the rel. ΔE in standard and accelerated CXL groups increased significantly in the anterior 400 μm and 275 μm depth, respectively. Also, the relative change in stress (rel. ΔS) was significantly lower after standard and accelerated CXL compared to sham controls. Depth analysis showed similar results for the elastic effect. TEM images showed a small, non-significant increase in fibril diameter. The interfibrillar spacing decreased significantly after standard and accelerated CXL in the anterior-mid stromal region. We noted that the increase of corneal stiffness correlated with decrease in interfibrillar spacing after CXL. The stiffening effect was depth dependent. The effect of accelerated CXL was less in the deep corneal stromal regions compared to standard CXL. • Biomechanical property changes are based on corresponding changes in morphology. • The increase of corneal stiffness correlated with decrease in interfibrillar spacing. • The stiffening effect was depth dependent after Collagen crosslinking. [ABSTRACT FROM AUTHOR]

The mechanical state of cardiomyocyte is directly related to the structure and function of internal sarcomeres. In the field of computational cardiac mechanics, attempts to establish models of human cardiomyocyte with a detailed representation of sarcomere cross-bridge (XB) are rare. In this study, we established a computational model for a cardiomyocyte with idealized geometry while containing a representative sarcomere composed of thick filament, thin filament, titin filament, and Z-disc. The formation of XB with passive tension in the model was simulated with the finite element (FE) method, and stochastic FE analyses were further carried out in conjunction with six sigma analysis to explore the interaction between the S1 power stroke and the twitch mechanics of cardiomyocyte. The proposed modeling method may help us better understand the working state of cardiomyocyte, and offer a potential means for exploring the cell-level mechanisms of cardiac diseases.

Splenectomy is a common surgery for portal hypertensive patients with splenomegaly. Although splenectomy is able to effectively relieve the complications of portal hypertension, it also increases the risk of portal venous system thrombosis remarkably. Previous studies demonstrated that the hemodynamic metrics of the portal venous system could be employed in predicting the risk of postsplenectomy thrombosis, and 3D models were utilized to simulate the blood flow in the portal venous system. Aiming to reflect the global effect of splenectomy and better simulate the hemodynamic metrics, in this study, a 0D-3D multi-scale model of the portal venous system coupled with the entire cardiovascular system was constructed based on population-averaged data in combination with patient-specific preoperative clinical measurements. The pre- and postoperative global blood flows as well as the variations were calculated successfully, and the flow field and time-averaged wall shear stress of the portal venous system were simulated. The model-simulated spatial distributions of the hemodynamic metrics in the portal venous system were comparable with the regions suffering from thrombosis after splenectomy. These results imply that the present model could reflect the reallocation of the blood flow in the splanchnic circulation after splenectomy and simulate the hemodynamic metrics of the portal venous system, which would promote the more accurate risk stratification of postsplenectomy thrombosis and improve the patient-specific postoperative management.Clinical Relevance- The computational model developed by the present study provides a feasible scheme for simulating postsplenectomy hemodynamic metrics of the portal venous system more accurately, which would benefit the risk prediction and prophylaxis of portal venous system thrombosis for portal hypertensive patients receiving splenectomy.

The deployment of hernia repair patches in laparoscopic procedures is gradually increasing. In this technology, however, understanding the new phases of titanium from the parent phase on polymer substrates is essential to control the microstructural transition and material properties. It remains a challenging area of condensed matter physics to predict the kinetic and thermodynamic properties of metals on polymer substrates from the molecular scale due to the lack of understanding of the properties of the metal-polymer interface. However, this paper revealed the mechanism of nucleation on polymer substrates and proposed for the first record a time-dependent regulatory mechanism for the polymer-titanium interface. The interconnection between polymer surface chain entanglement, nucleation and growth patterns, crystal structure and surface roughness were effectively unified. The secondary regulation of mechanical properties was accomplished simultaneously to satisfy the requirement of biocompatibility. Titaniumized polypropylene patches prepared by time-dependent magnetron sputtering technology demonstrated excellent interfacial mechanical properties and biocompatibility. In addition, modulation by low-temperature plasma metal deposition opened a new pathway for biomaterials. This paper provides a solid theoretical basis for the research of titanium nanofilms on medical polypropylene substrates and the medical industry of implantable biomaterials, which will be of great value in the future., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Ye, Zhang, Liu, Xuan, He, Hou, Han, Yu, Shi, Kang and Chen.)