Search

Aerial vehicles equipped with infrared thermal sensors facilitate quick density estimates of wildlife, but detection error can arise from the thermal sensor and viewer of the infrared video. We reviewed published research to determine how commonly these sources of error have been assessed in studies using infrared video from aerial platforms to sample wildlife. The number of annual articles pertaining to aerial sampling using infrared thermography has increased drastically since 2018, but past studies inconsistently assessed sources of imperfect detection. We illustrate the importance of accounting for some of these types of error in a case study on white‐tailed deer Odocoileus virginianus in Indiana, USA, using a simple double‐observer approach. In our case study, we found evidence of false negatives associated with the viewer of infrared video. Additionally, we found that concordance between the detections of two viewers increased when using a red‐green‐blue camera paired with the infrared thermal sensor, when altitude decreased and when more stringent criteria were used to classify thermal signatures as deer. We encourage future managers and ecologists recording infrared video from aerial platforms to use double‐observer methods to account for viewer‐induced false negatives when video is manually viewed by humans. We also recommend combining infrared video with red‐green‐blue video to reduce false positives, applying stringent verification standards to detections in infrared and red‐green‐blue video and collecting data at lower altitudes over snow when needed. [ABSTRACT FROM AUTHOR]

Each year, billions of birds migrate across the globe, and interpretation of weather radar signals is increasingly being used to document the spatial and temporal migration patterns in Europe and America. Such approaches are yet to be applied in the East Asian‐Australasian Flyway (EAAF), one of the most species‐rich and threatened flyways in the world. Logistical challenges limit direct on‐ground monitoring of migratory birds in many parts of the EAAF, resulting in knowledge gaps on population status and site use that limit evidence‐based conservation planning. Weather radar data have great potential for achieving comprehensive migratory bird monitoring along the EAAF. In this study, we discuss the feasibility and challenges of using weather radar to complement on‐ground bird migration surveys in the flyway. We summarize the location, capacity and data availability of weather radars across EAAF countries, as well as the spatial coverage of the radars with respect to migrants' geographic distribution and migration hotspots along the flyway, with an exemplar analysis of biological movement patterns extracted from Chinese weather radars. There are more than 430 weather radars in EAAF countries, covering on average half of bird species' passage and non‐breeding distributions, as well as 70% of internationally important sites for migratory shorebirds. We conclude that the weather radar network could be a powerful resource for monitoring bird movements over the full annual cycle throughout much of the EAAF, providing estimates of migration traffic rates, site use, and long‐term population trends, especially in remote and less‐surveyed regions. Analyses of weather radar data would complement existing ornithological surveys and help understand the past and present status of the avian community in a highly threatened flyway. [ABSTRACT FROM AUTHOR]

The frequency of extreme storm events has significantly increased in the past decades, causing significant damage to European forests. To mitigate the impacts of extreme events, a rapid assessment of forest damage is crucial, and satellite data are an optimal candidate for this task. The integration of satellite data in the operational phase of monitoring forest damage can exploit the complementarity of optical and Synthetic Aperture Radar (SAR) open datasets from the Copernicus programme. This study illustrates the testing of Sentinel 1 and Sentinel 2 data for the detection of areas impacted by the Vaia storm in Northern Italy. The use of multispectral Sentinel 2 provided the best performance, with classification overall accuracy (OA) values up to 86 percent; however, optical data use is seriously hampered by cloud cover that can persist for months after the event and in most cases cannot be considered an appropriate tool if a fast response is required. The results obtained using SAR Sentinel 1 were slightly less accurate (OA up to 68 percent), but the method was able to provide valuable information rapidly, mainly because the acquisition of this dataset is weather independent. Overall, for a fast assessment Sentinel 1 is the better of the two methods where multispectral and ground data are able to further refine the initial SAR-based assessment. [ABSTRACT FROM AUTHOR]

Mediterranean maquis is a complex and widespread ecosystem in the region, intrinsically prone to fire. Many species have developed specific adaptation traits to cope with fire, ensuring resistance and resilience. Due to the recent changes in socio-economy and land uses, fires are more and more frequent in the urban-rural fringe and in the coastlines, both now densely populated. The detection of fires and the monitoring of vegetation regrowth is thus of primary interest for local management and for understanding the ecosystem dynamics and processes, also in the light of the recurrent droughts induced by climate change. Among the main objectives of the COSMO-SkyMed radar constellation mission there is the monitoring of environmental hazards; the very high revisiting time of this mission is optimal for post-hazard response activities. However, very few studies exploited such data for fire and vegetation monitoring. In this research, Cosmo-SkyMed is used in a Mediterranean protected area covered by maquis to detect the burnt area extension and to conduct a mid-term assessment of vegetation regrowth. The positive results obtained in this research highlight the importance of the very high-resolution continuous acquisitions and the multi-polarization information provided by COSMO-SkyMed for monitoring fire impacts on vegetation. [ABSTRACT FROM AUTHOR]

Among tropical areas, Africa is considered to be poor in terms of biodiversity as compared with Amazon or South-East Asia, especially with respect to forest diversity. Despite this lower diversity, some African tropical zones, such as Ghana, harbour a plethora of species, particularly of trees. Unfortunately, as a result of anthropogenic impacts, biological diversity in West Africa dramatically decreased in the last decades, with very limited reference to evaluate the amount of the loss. Due to these growing pressure, a collection of relevant biodiversity information in this region seems to be urgent. We surveyed 127 temporary plots randomly distributed within 3 protected areas in Ghana and we collected data on tree (dbh>10 cm) species richness and their abundances. We also performed α, and β diversity analyses, and estimated the effective number of species, adopting various indices and approaches to provide further information on each assemblage. The main goals of this research were: (i) to provide a wide tree species database (abundance-based data), together with some biodiversity analyses; (ii) to estimate the sampling effort needed for next biodiversity surveys in the same and similar regions; and (iii) to calculate some indices useful to monitor the future of these protected areas both in terms of conservation and biodiversity research. [ABSTRACT FROM AUTHOR]

Remote sensing supports carbon estimation, allowing the upscaling of field measurements to large extents. Lidar is considered the premier instrument to estimate above ground biomass, but data are expensive and collected on-demand, with limited spatial and temporal coverage. The previous JERS and ALOS SAR satellites data were extensively employed to model forest biomass, with literature suggesting signal saturation at low-moderate biomass values, and an influence of plot size on estimates accuracy. The ALOS2 continuity mission since May 2014 produces data with improved features with respect to the former ALOS, such as increased spatial resolution and reduced revisit time. We used ALOS2 backscatter data, testing also the integration with additional features (SAR textures and NDVI from Landsat 8 data) together with ground truth, to model and map above ground biomass in two mixed forest sites: Tahoe (California) and Asiago (Alps). While texture was useful to improve the model performance, the best model was obtained using joined SAR and NDVI (R² equal to 0.66). In this model, only a slight saturation was observed, at higher levels than what usually reported in literature for SAR; the trend requires further investigation but the model confirmed the complementarity of optical and SAR datatypes. For comparison purposes, we also generated a biomass map for Asiago using lidar data, and considered a previous lidar-based study for Tahoe; in these areas, the observed R² were 0.92 for Tahoe and 0.75 for Asiago, respectively. The quantitative comparison of the carbon stocks obtained with the two methods allows discussion of sensor suitability. The range of local variation captured by lidar is higher than those by SAR and NDVI, with the latter showing overestimation. However, this overestimation is very limited for one of the study areas, suggesting that when the purpose is the overall quantification of the stored carbon, especially in areas with high carbon density, satellite data with lower cost and broad coverage can be as effective as lidar. [ABSTRACT FROM AUTHOR]

Degradation, a reduction of the ecosystem's capacity to supply goods and services, is widespread in tropical forests and mainly caused by human disturbance. To maintain the full range of forest ecosystem services and support the development of effective conservation policies, we must understand the overall impact of degradation on different forest resources. This research investigates the response to disturbance of forest structure using several indicators: soil carbon content, arboreal richness and biodiversity, functional composition (guild and wood density), and productivity. We drew upon large field and remote sensing datasets from different forest types in Ghana, characterized by varied protection status, to investigate impacts of selective logging, and of illegal land use and resources extraction, which are the main disturbance causes in West Africa. Results indicate that functional composition and the overall number of species are less affected by degradation, while forest structure, soil carbon content and species abundance are seriously impacted, with resources distribution reflecting the protection level of the areas. Remote sensing analysis showed an increase in productivity in the last three decades, with higher resiliency to change in drier forest types, and stronger productivity correlation with solar radiation in the short dry season. The study region is affected by growing anthropogenic pressure on natural resources and by an increased climate variability: possible interactions of disturbance with climate are also discussed, together with the urgency to reduce degradation in order to preserve the full range of ecosystem functions. [ABSTRACT FROM AUTHOR]

Identifying historical forest disturbances is difficult, especially in selectively logged areas. LiDAR is able to measure fine-scale variations in forest structure over multiple kilometers. We use LiDAR data from ca. 16 km2 of forest in Sierra Leone, West Africa, to discriminate areas of old-growth from areas recovering from selective logging for 23 years. We examined canopy height variation and gap size distributions. We found that though recovering blocks of forest differed little in height from old-growth forest (up to 3 m), they had a greater area of canopy gaps (average 10.2% gap fraction in logged areas, compared to 5.6% in unlogged area); and greater numbers of gaps penetrating to the forest floor (162 gaps at 2 m height in logged blocks, and 101 in an unlogged block). Comparison of LiDAR measurements with field data demonstrated that LiDAR delivered accurate results. We found that gap size distributions deviated from power-laws reported previously, with substantially fewer large gaps than predicted by power-law functions. Our analyses demonstrate that LiDAR is a useful tool for distinguishing structural differences between old-growth and old-secondary forests. That makes LiDAR a powerful tool for REDD+ (Reduction of Emissions from Deforestation and Forest Degradation) programs implementation and conservation planning. [ABSTRACT FROM AUTHOR]

Landsat Thematic mapper (TM) image has long been the dominate data source, and recently LiDAR has offered an important new structural data stream for forest biomass estimations. On the other hand, forest biomass uncertainty analysis research has only recently obtained sufficient attention due to the difficulty in collecting reference data. This paper provides a brief overview of current forest biomass estimation methods using both TM and LiDAR data. A case study is then presented that demonstrates the forest biomass estimation methods and uncertainty analysis. Results indicate that Landsat TM data can provide adequate biomass estimates for secondary succession but are not suitable for mature forest biomass estimates due to data saturation problems. LiDAR can overcome TM's shortcoming providing better biomass estimation performance but has not been extensively applied in practice due to data availability constraints. The uncertainty analysis indicates that various sources affect the performance of forest biomass/carbon estimation. With that said, the clear dominate sources of uncertainty are the variation of input sample plot data and data saturation problem related to optical sensors. A possible solution to increasing the confidence in forest biomass estimates is to integrate the strengths of multisensor data. [ABSTRACT FROM AUTHOR]

Protection and recovery of natural resource and biodiversity requires accurate monitoring at multiple scales. Airborne Laser Scanning (ALS) provides high-resolution imagery that is valuable for monitoring structural changes to vegetation, providing a reliable reference for ecological analyses and comparison purposes, especially if used in conjunction with other remote-sensing and field products. However, the potential of ALS data has not been fully exploited, due to limits in data availability and validation. To bridge this gap, the global network for airborne laser scanner data (GlobALS) has been established as a worldwide network of ALS data providers that aims at linking those interested in research and applications related to natural resources and biodiversity monitoring. The network does not collect data itself but collects metadata and facilitates networking and collaborative research amongst the end-users and data providers. This letter describes this facility, with the aim of broadening participation in GlobALS. [ABSTRACT FROM AUTHOR]

We combined two existing datasets of vegetation aboveground biomass (AGB) (Proceedings of the National Academy of Sciences of the United States of America, 108, 2011, 9899; Nature Climate Change, 2, 2012, 182) into a pan-tropical AGB map at 1-km resolution using an independent reference dataset of field observations and locally calibrated high-resolution biomass maps, harmonized and upscaled to 14 477 1-km AGB estimates. Our data fusion approach uses bias removal and weighted linear averaging that incorporates and spatializes the biomass patterns indicated by the reference data. The method was applied independently in areas (strata) with homogeneous error patterns of the input (Saatchi and Baccini) maps, which were estimated from the reference data and additional covariates. Based on the fused map, we estimated AGB stock for the tropics (23.4 N-23.4 S) of 375 Pg dry mass, 9-18% lower than the Saatchi and Baccini estimates. The fused map also showed differing spatial patterns of AGB over large areas, with higher AGB density in the dense forest areas in the Congo basin, Eastern Amazon and South-East Asia, and lower values in Central America and in most dry vegetation areas of Africa than either of the input maps. The validation exercise, based on 2118 estimates from the reference dataset not used in the fusion process, showed that the fused map had a RMSE 15-21% lower than that of the input maps and, most importantly, nearly unbiased estimates (mean bias 5 Mg dry mass ha(-1) vs. 21 and 28 Mg ha(-1) for the input maps). The fusion method can be applied at any scale including the policy-relevant national level, where it can provide improved biomass estimates by integrating existing regional biomass maps as input maps and additional, country-specific reference datasets., (© 2015 John Wiley & Sons Ltd.)