Search

La prevalencia de la polinosis está aumentando en los países desarrollados en las últimas décadas, siendo una enfermedad que ocasiona un gran número de días de pérdida de actividad laboral o de asistencia a la escuela, por lo que, además de los costes directos ligados a la enfermedad, ocasiona importantes costes indirectos. La evitación de la exposición es la medida preventiva más eficaz. El disponer de datos aerobiológicos para áreas geográficas homogéneas permite a los enfermos, tanto poner en marcha medidas preventivas, como optimizar el periodo de uso de medicamentos y mejorar la calidad de vida. Las redes aerobiológicas deben decidir el modo en que suministra la información. En el caso de información destinada a la población general, es más útil difundirla como intervalos de concentraciones ajustados a categorías de valores umbrales bajos, medios, altos o muy altos, que a un dato numérico concreto que puede no alcanzar el objetivo perseguido. En este trabajo hemos analizado esta información para los datos generados en la Red Aerobiológica de la Región de Murcia y a partir de las bases de datos aerobiológicas del periodo 2010-2016 hemos propuesto, basado en el análisis de los percentiles 90, 95, 97 y 99 de la serie temporal, unos valores umbrales, en cuatro escalones, bajo, medio, alto y muy alto para los tipos polínicos Poaceae y Urticaceae en la ciudades de Cartagena, Murcia y Lorca, que mejoran la información suministrada por la Red Aerobiológica de la Región de Murcia encaminada a que los pacientes alérgicos emprendan las medidas de evitación y el tratamiento farmacológico.

This study aims to investigate the meteorological variables determining Cupressaceae pollen grain disruption in the environment. A parallel sampling of pollen grains and disrupted Cupressaceae pollen grains was performed in six cities using two Spanish aerobiological networks. The pollen concentrations, disrupted pollen concentrations, percentage of disrupted pollen and number of days when the percentage of disrupted pollen was above or equal to 50 % were quantified during two pollen seasons. The concentrations were determined following the standardised method EN 16868. Results show that the concentrations of pollen grains and disrupted pollen grains were not determined by geographical features and rarely by bioclimatic variables or indexes but by the ornamental use of the specimens in the vicinity of the pollen sampler, highlighting the possibility of using management practices to reduce exposure to allergens in the cities. African dust outbreaks coincided with higher concentrations of pollen grains and disrupted pollen grains, but the reduced percentage of disrupted pollen grains pointed to a non-causal relationship with long-distance transport. The effect of wind and maximum gusts remained negligible. The triggering factor for pollen disruption was the amount of water in the atmosphere, mainly reported as relative humidity. Rainfall increased the effect of disruption due to pollen grain swelling caused by its wash-out effect. The higher the relative humidity, the higher the disrupted pollen concentrations. This aligns with the mechanism of Cupressaceae reproduction since the family needs a water medium in the form of pollination droplets for the pollination tube to develop and the pollen grain to perform its biological function. Therefore, people that develop allergic symptoms to Cupresaceae pollen should avoid exposure during days with high relative humidity in the main pollen season., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

In highly industrialized areas, abating particulate matter (PM) is complex owing to the variety of emission sources with different chemical profiles that may mix in the atmosphere. Gijón-an industrial city in northern Spain-was selected as a case study to better understand the key emission sources and improve air quality in highly industrialized areas. Accordingly, the trends of various air quality indicators (PM10, PM2.5, SO 2 , NO 2 , and O 3 ) during the past decade (2010-2019) were analyzed. Additionally, the inorganic and organic PM10 compositions were analyzed for source apportionment studies and to assess the impact of COVID-19 restrictions on PM10 levels. The results revealed that over the past decade, PM10 concentrations decreased, whereas PM2.5 concentrations dominated by secondary inorganic aerosols (SIA) remained relatively constant. Notably, during the COVID-19 lockdown, the PM10 concentration increased by 9.1%, primarily owing to an increase in regional SIA (>65%) due to specific meteorological conditions that favor the formation of secondary PM from gaseous precursors. Overall, eight key PM10 sources were identified: "industrial fugitive PM resuspension" (FPM, 28% of mean PM10 concentration), "aged sea spray" (SSp, 16%), "secondary nitrate" (SN, 15%), "local diffuse source" (LPM, 12%), "solid fuel combustion" (SFC, 7.8%), "biomass burning" (BB, 7.4%), "secondary sulphate" (SSu, 6.0%), and "sinter" (SIN, 4.5%). The PM10 concentration in Gijón is significantly influenced by the integrated steel industry (FPM, SFC, and SIN; 41% of PM10) and fugitive primary PM emissions were the main source (FPM and LPM; 40%). To reduce PM10 and PM2.5 concentrations, industrial fugitive emissions, which are currently poorly regulated, and SIA precursors must be abated. This study provides a methodological approach that combines trend analysis, chemical speciation, and source apportionment for assessing pollution abatement strategies in industrialized areas with a complex mix of emission sources., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Due to the COVID-19 pandemic, lockdown restrictions were established around the world. Many studies have assessed whether these restrictions affected atmospheric pollution. Comparison between them is difficult as the periods of time considered are generally not the same and thus, different conclusions may be reached. Besides, most of them consider mean daily pollutant concentration, despite differences being observed according to the time of day. In this study, the hourly levels of PM10, PM2.5 and black carbon (BC) in an industrial suburban area in the north of Spain were analysed from May 2019 to June 2020 and compared with those from the literature, using the same period in each case. In general, the highest concentrations were reached when the wind direction came from the southwest (where a steelworks, a coal-fired power plant and other industries are located) and during the night-time, both before and during the lockdown. The highest concentrations of PM10, PM2.5 and BC were observed from December to February (on average: 45, 17 and 1.3 μg m -3 , respectively). The decrease/increase in those pollutants levels during the lockdown were found to be highly dependent on the period considered. Indeed, PM10 can be found to decrease by up to 39% or increase by 12%; PM2.5 can decrease by 21% or increase by up to 36%; and BC, although it generally decreases (by up to 42%), can increase by 7.4%., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 The Authors.)

Microplastics have appeared as emerging pollutants due to the diverse applications of plastics in today's world. Growing evidence points to the negative impacts that airborne microplastics have on human health, as they can enter the human body through respiration. Our aim was to quantify polystyrene airborne microplastics in smaller fractions, thoracic (PM 10 ) and alveolar (PM 2.5 ), as they have scarcely been studied. In this work, we proposed a methodology based on thermogravimetric analysis coupled with mass spectrometry that requires minimal sample preparation and does not limit particle size. We applied this methodology to quantify the airborne polystyrene in PM 10 and PM 2.5 fractions in mass units of microplastics per m 3 of air in an urban and agricultural region during the summer of 2021. The mean concentrations of polystyrene found in the PM 10 and PM 2.5 fractions were 2.09 and 1.81 ng m -3 , respectively. Therefore, the majority of airborne polystyrene microplastics are found in the alveolar fraction which, is associated with severe cardiopulmonary and respiratory diseases. According to air mass backward trajectories, it was noted that the main sources of these emerging pollutants could be related to local agricultural practices., Competing Interests: Declaration of competing interest The authors declare that they have no conflicts of interest. The manuscript was approved for publication by all the authors., (Copyright © 2022 The Authors. Published by Elsevier B.V. All rights reserved.)

Ninety 24-h samples of the dry deposition fraction of settleable particulate matter (DSPM) were collected at one suburban industrial site ('EMA') and two urban industrial sites ('Lauredal' and 'Laboratory') in the western area of Gijón (North of Spain) from December 2019 to June 2020. The levels registered point to an environmental issue that should receive close attention from environmental authorities. Before lockdown restrictions due to COVID-19 were established, all samples collected at the EMA site exceeded 300 mg·m -2 ·d -1 (the Spanish limit value until 2002). Large amounts of DSPM were also registered at the Lauredal and Laboratory sites, maximum levels reaching 1039.2 and 672.7 mg·m -2 ·d -1 , respectively. Seven metals were analysed in DSPM samples: Al, Ca, Fe, K, Mg, Mn and Na. Fe reached the highest values: 2473.4, 463.4 and 293.3 mg·m -2 ·d -1 (EMA, Lauredal and Laboratory sites, respectively). This study quantifies the reductions in the DSPM levels registered (on average, 97.2, 73.5 and 90.5% at the EMA, Lauredal and Laboratory sites, respectively) during the lockdown, which involved the restriction of population mobility and industrial activity. The influence of wind speed and its direction were also assessed to better understand the role of these restrictions in the observed reductions. The concentrations of all the metals in the DSPM were reduced by more than 75%, on average, except for K at the Laboratory and Lauredal sites. These decreases were much higher than those found by other authors for smaller fractions of the atmospheric particulate matter (PM10, PM2.5). The findings of the present study highlight the importance of DSPM in highly industrialized urban/suburban locations and indicate the direction that legal measures might take, given the influence of anthropogenic emissions., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2022 The Authors.)

The evolution of the behaviour of the Cannabis taxon in the Region of Murcia, Spain, has been analysed (in the cities of Cartagena, 1993-2020; Murcia, 2010-2020; and Lorca, 2010-2020). An attempt has been made to establish the origin of Cannabis pollen in this region to determine whether it is transported locally or from long distances based on air mass origins. Cannabis is an herbaceous, normally dioecious and anemophilous plant, which produces large quantities of pollen grains. It has been widely used for fibre (hemp), bird food (hempseed), essential oils and narcotics. The origin of Cannabis pollen grains has been established by calculating back trajectories at the altitudes of: 750, 1500 and 2500 m above mean sea level (m amsl); 350, 500 and 650 m amsl; and 10, 100 and 250 m amsl, using the HYSPLIT model. Considering this data, 29 days of Cannabis pollen potentially originating in Africa were identified in Cartagena, 19 days in Murcia and 15 days in Lorca. Of the remaining days, the air mass back trajectories showed local or regional pollen origins. These were 83 days in Cartagena, 61 days in Murcia and 57 days in Lorca. The presence of Cannabis in the bioaerosol of the Region of Murcia is irregular, and it is considered a minority pollen type. However, from 2017 to 2020, concentrations increased, with a positive and significant trend of 90% in the Annual Pollen Integral. The pollen season can be defined between June and August. This increase in the concentration of Cannabis pollen grains during this period coincides with an increase in local transport, suggesting the possibility of increased Cannabis cultivation in the study area., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 The Authors. Published by Elsevier B.V. All rights reserved.)

The rationale of this paper was to investigate whether earthquakes impact airborne pollen concentrations, considering some meteorological parameters. Atmospheric pollen concentrations in the Region of Murcia Aerobiological Network (Spain) were studied in relation to the occurrence of earthquakes of moment magnitude (up to M w  = 5.1) and intensity (intensity up to grade VII on the European Macroseismic Scale). In this study, a decade (2010-2019) was considered across the cities of the network. Earthquakes were detected in 12 out of 1535 days in the Olea Main Pollen Season in Cartagena, 49 out of 1481 days in the Olea Main Pollen Season in Lorca, and 39 out of 1441 days in the Olea Main Pollen Season in Murcia. The Olea pollen grains in this network were attributed to the species Olea europaea, i.e., the olive tree, a taxon that appears widely in the Mediterranean basin, in both cultivated and wild subspecies. Differences between the Olea concentration on days with and without earthquakes were only found in Lorca (Kruskal-Wallis: p-value = 0.026). The low frequency and intensity of the earthquakes explained these results. The most catastrophic earthquake felt in Lorca on May 11 th , 2011 (IVII, M w  = 5.1, 9 casualties) did not result in clear variations in pollen concentrations, while meteorology (e.g., African Dust Outbreak) might have conditioned these pollen concentrations. The research should be broadened to other active seismological areas to reinforce the hypothesis of seismological impact on airborne pollen concentrations., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 The Authors. Published by Elsevier B.V. All rights reserved.)

Aims: To analyse the relationship among air pollutants, markers of inflammation and infarct size in patients with acute coronary syndrome (ACS). Methods: This was a prospective analysis of consecutive patients admitted to hospital because of ACS. Cardiac biomarkers were drawn. The daily mean values of the air pollutants from the day before until 7 days before admission were analysed. The study population was stratified according to infarct size, based on median peak troponin value. Results: Patients were divided into two groups of 108 subjects each, according to median peak troponin value. Patients with extensive MIs had a higher neutrophil:lymphocyte ratio and leukocyte and neutrophil counts than patients with smaller MIs. In addition, they were exposed to higher concentrations of sulphur dioxide (9.7 ± 4.1 versus 8.4 ± 3.1 μg/m 3 ; p=0.009) and lower concentrations of ozone (33.8 ± 13.7 versus 38.6 ± 14.5 μg/m 3 ; p=0.014). Multivariate analysis showed that sulphur dioxide levels (OR 1.12; 95% CI [1.031-1.21]; p=0.007) and neutrophil/lymphocyte ratio (OR 1.08; 95% CI [1.011-1.17]; p=0.024) were independent predictors of infarct size. Conclusion: Patients with extensive MIs had higher white cell inflammatory levels and had been exposed to higher sulphur dioxide concentrations in the ambient air., Competing Interests: Disclosure: PA is deputy editor of European Cardiology Review; this did not influence peer review. All other authors have no conflict of interests to declare. Trial registration: This is an observational, non-randomised study, so it has not been registered. Consent and ethics: Informed consent was obtained from patients and they consented to the submission of research to the journal. This study was carried out in accordance with the Code of Ethics of the World Medical Association (Declaration of Helsinki). Data availability statement: Authors elect not to share data., (Copyright © 2021, Radcliffe Cardiology.)

Olea pollen concentrations have been studied in relation to the typology of air masses, pollen grain sources and marine nature during advections in a coastal enclave in the south-eastern Iberian Peninsula. Since Spain is the world's leading olive producer, and olive growing extends throughout the Mediterranean basin, this location is ideal for the study of long-distance transport events (LTD) during the main pollen season (MPS). The air masses were classified using the calculation of 48-h back trajectories at 250, 500 and 750 m above ground level using the HYSPLIT model. After that, the frequency of LDT events from Africa and Europe was found to be 8.7% of the MPS days. In contrast, regional air masses were found in 38.6% of the MPS days. This was reflected in pollen concentrations, with significantly higher concentrations (p-value <0.05) on days with regional air masses compared to days with European air masses. Regarding the source areas, the importance of nearby sources with intense olive cultivation was confirmed (i.e., Andalusia). This proximity was relevant beyond the attenuations observed when the advections acquired a marine nature as the air mass back trajectories moved over the sea (p-value <0.001). The review of air mass typologies, source areas and pollen concentrations resulted in establishing peak dates and the detection of LDT associated with these peak dates. Distortions in the typical path of each air mass explained alterations in pollen concentrations on consecutive days. The recirculation and loops of the air mass back trajectories varied the pollen load that every type of air mass could originally contain., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 The Authors. Published by Elsevier B.V. All rights reserved.)

Airborne particulate matter such as mineral dust comes mainly from natural sources, and the African regions of Sahara and Sahel originate large amounts of the aerosols dispersed worldwide. There is little knowledge about the influence of dust episodes on airborne pollen concentrations, and although the centre and southeast of the Iberian Peninsula are frequently affected by dust intrusions, until now, no specific works have analysed the effect of these episodes on airborne pollen concentrations in these areas. The aims of this study were to analyse the simultaneous occurrence of airborne pollen peaks and Saharan-Sahel dust intrusions in the central and south-eastern Iberian Peninsula, and to study the weather conditions - air mass pathways and conditions of air temperature, relative humidity and atmospheric pressure - that influence the airborne pollen concentrations during dust episodes. The results showed that the rise in airborne pollen concentrations during dust episodes is apparent in inland Iberian areas, although not in coastal areas in the southeast where pollen concentrations are even observed to decrease, coinciding with prevailing easterly winds from the sea. Total pollen concentrations and specific pollen types such as Olea, Poaceae and Quercus showed an increase in the central Iberian Peninsula during dust episodes when two meteorological phenomena concur: 1) prevailing winds from extensive areas of major wind-pollinated pollen sources over a medium or short distance (mainly from western and southwestern areas); and 2) optimal meteorological conditions that favour pollen release and dispersal into the atmosphere (mainly high temperatures and subsequently low humidity in central areas). Both conditions often occur during the Saharan-Sahel dust intrusions in the centre. Maximum pollen peaks are therefore most likely to occur during dust episodes in the central Iberian Peninsula, thus dramatically increasing the risk of outbreaks of pollinosis and other respiratory diseases in the population., (Copyright © 2021 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Settleable particulate matter (SPM) was collected at two sampling points within an urban area highly affected by nearby industrial activities. Total deposition values up to 386 mg ·m -2 ·d -1 were registered, the majority of samples exceeding the limit value established in the legislation in force in Spain until 2002 (300 mg·m -2 ·d -1 ). Dry deposition values showed high variability (8.6-830.3 mg·m -2 ·d -1 ). Forty-one metals and metalloids were analysed in the dry fraction of SPM, the main being Fe and Ca (maximums: 304.4 and 68.6 mg·m -2 ·d -1 , respectively), followed by Al, Mg, Na, K, Mn, Ti, P and Zn. Trace elements like As and Pb reached up to 7.3 and 76.3 μg· m -2 ·d -1 , respectively. Strong correlations (r > 0.90, p-value < 0.05) between Fe and other elements (Ca, Mn and Pb) were found at both sampling sites. Scanning electron microscopy confirmed the presence of these particles rich in Fe and Ca, in addition to other components, whose morphologies pointed out to anthropogenic sources. These results combined with meteorology data suggest a common industrial source contributing to the levels of these metals. Furthermore, a human health risk study was carried out to assess the potential carcinogenic and non-carcinogenic risks of exposure to thirteen elements in these particles (Al, As, Cd, Co, Cu, Mn, Mo, Ni, Pb, Sb, Sr, V and Zn). The highest levels of risk seemed to be associated with the presence of As, Pb and Sb., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

A mixture of supermarket food waste from bakery, butchery, cooked meats and cheese, fishmonger, fruit, and vegetable sections was subjected to anaerobic digestion under thermophilic conditions (55 °C). Lab-scale induced bed reactors (IBR) and completely stirred tank reactors (CSTR) were operated at different organic loading rates (OLR), i.e., 3.0, 3.6 and 4.6 kg volatile solids (VS) per m 3 of reactor and day. Regardless of the type of reactor, an OLR of 3.6 kg VS/m 3 ·day was found to be the optimum, achieving up to 48.1% more methane production per kg of treated waste than for the other OLRs tested. In general, there were no statistically significant differences (p-value < 0.05) between IBR and CSTR performance at the same OLR tested. However, for the optimum OLR, the IBR achieved a mean methane production of 1.5 L CH 4 /L reactor ·day (426.7 L CH 4 /kg VS) and the highest VS removal (89.0%, on average). This reactor obtained 22.1% more CH 4 yield than the analogous CSTR and the highest methane content in the biogas (66.9% CH 4 ). Finally, the process was successfully tested under large-scale conditions (1.25 m 3 IBR pilot-plant). The CH 4 production and the biodegradation yield were in line with those obtained in the lab-scale IBR., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

There is growing interest in investigating the human health risk associated with metals in airborne particulate matter. The objective of this paper is the health risk assessment of Al, Be, Sb, Sn, Ti and Tl in PM 10 under different advections of air masses. These metals/semi-metal were studied in samples collected in an area influenced by industrial activities in northern Spain with the aim of analysing the variations in PM 10 metal/semi-metal. Elemental concentrations were assessed over a period of one year in terms of air mass origin by means of back trajectories (HYSPLIT), the conditional probability function, polar plots, PM concentration roses, aerosol maps (NAAPs) and receptor modelling. The mean concentrations of Al, Be, Sb, Sn, Ti and Tl were 254, 0.02, 1.30, 1.15, 15.3 and 0.20  ng/m 3 , respectively, and were within the usual range for suburban stations in Europe. The highest levels were recorded during conditions of regional air mass origin, highlighting the importance of sources not far from the station. Under these circumstances, the renovation of air masses was not produced. The main sources of metals were anthropogenic, mostly related to the use of coal and coke production. In general, the cancer and non-cancer risk values obtained in this study fell within accepted precautionary criteria in all trajectory groups. However, in order to improve air quality and reduce risks to human health, the impact resulting from the joint inhalation of Al, Be, Sb, Sn, Ti and Tl should not be ignored when air masses are fundamentally of regional origin., Competing Interests: Declaration of competing interest None., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Olive cultivation is of great importance in Southern Europe but olive pollen is the leading cause of allergy in many regions where it is grown. The best preventive measure for allergic patients is to avoid exposure. Thus, aerobiological monitoring networks must supply realistic pollen classes for the different types of allergic pollen. Even though those pollen classes are defined, they do not necessarily fit local data. Altogether, they should use predictive models to assess flowering intensity in advance. In this study, the Olea pollen degree of exposure classes (OPDEC) are defined based on percentiles and a predictive model is suggested for Cartagena, Spain. 24year (1993-2016) Olea pollen counts series was used to characterize the Main Pollen Season (MPS). The aerobiological samples were processed following the methodology proposed by Hirst and developed by the Spanish Aerobiology Network. The aerobiological database was completed with the meteorological data supplied by AEMET (Spanish State Meteorological Agency). MPS evolution over time, and its relation with temperature and rainfall, has been analysed. The study showed an increase in MPS duration and the amount of Olea pollen grains collected both in MPS and the peak day. The OPDEC should fit local data to improve preventive measures. Based on the 24year series, the proposed OPDEC for Cartagena are: Low (≤10grains/m 3 ), Medium (between 10 and 50grains/m 3 ), High (between 51 and 100grains/m 3 ) and Very High (≥100grains/m 3 ). Olea pollen estimations in the MPS and in the peak day were obtained by means of three Regression Methods and climatic factors. The analysis reveals that the Bagging for Regression Trees (BRT) method is a good predictive alternative and stablishes the importance for each meteorological variable., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The aim of this research study was to analyse the effect of applying inverted phase fermentation (IPF) prior to the anaerobic digestion of cattle manure and sewage sludge. IPF promotes the endogenous bacteria present in waste and hence enzymatic hydrolysis, producing a solid-liquid separation. The clarified bottom layer or liquid phase (LP, 70% volume in manure and 65% in sludge), and the thickened top layer or solid phase (SP, 30% volume in manure and 35% in sludge) were digested separately. Operating at 37 °C, the time needed to digest the LP from manure was shorter (10 days) than that needed to digest the corresponding SP or the untreated substrate (22 days in both cases). The time needed to digest the separated phases of sludge (LP: 2 days, SP: 15 days) was lower than that needed to digest manure. Biogas production rates for the manure after pretreatment were 0.5 L/L·day for the SP and 0.7 L/L·day for the LP, allowing higher OLR (4.5-4.8 gCOD/L·day) than when digesting untreated manure and increasing biogas production by 17%. IPF applied to sewage sludge led to a production of 1.8 L/L·day at an OLR of 6.2 gCOD/L·day for the SP and 2.0 L/L·day at 12.9 gCOD/L·day for the LP. Assuming a conventional OLR of 2-3 gCOD/L·day, the advantage of applying IPF to sewage sludge resides in the possibility of operating digesters at much higher OLR., (Copyright © 2016. Published by Elsevier Ltd.)

PM10 samples were collected at two suburban locations in northern Spain, a traffic-industrial suburban (TIS) station located in the coastal city of Gijón and an industrial suburban (IS) station in Langreo, about 25 km inland. The aerosol samples were chemically analysed to determine ambient air concentrations of As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Se, V and Zn. The results showed that the mean levels of As, Co, Cu, Fe, Mn, Ni, Pb and Se recorded at the IS location were higher than those at the TIS station. Mean levels of Fe and Zn in PM10 were higher than all other species at both the TIS and IS sampling sites (467 and 353 ng Fe/m 3 and 46 and 282 ng Zn/m 3 , respectively). Human exposure to these twelve potentially toxic elements through PM10 was assessed for both children and adults using the U.S.EPA method, considering three pathways: ingestion, dermal contact and inhalation. In general, the IS location presented higher non-cancer risks than the TIS site. However, at both suburban locations, cancer and non-cancer risk values were in the acceptable range for adults, some exceptions being found. Greater health risk was estimated in the case of children. For this sector of the population, ingestion, dermal contact and/or inhalation of As, Pb and Zn in PM10 may pose a health hazard owing to possible carcinogenic/non-carcinogenic effects., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Species of the Amaranthaceae family are abundant in the Southeast of Spain, one of the driest areas in Europe. The Amaranthaceae include species of interest from the point of view of allergic diseases. With the expansion of aridity, many species belonging to this family will be favoured. The objectives of this study were: first, to define the prevalence of sensitization to Amaranthaceae pollen in allergic patients in the Southeast of Spain; second, to present the aerobiological features of this taxon; and, finally, to demarcate those periods of increased risk of suffering allergic symptoms with the aim of improving the diagnosis and prevention of hay fever. Skin prick tests with extracts of pollen were performed on patients with symptoms of respiratory allergy referred for consultation for the first time in Almería and Murcia. Samples of the atmospheric bioaerosol were taken using a Lanzoni VPPS 2000 volumetric sampler, samples treatment and subsequent counts being carried out according to the methodology approved by the Spanish Aerobiological Network. The statistical significance of the correlation between aerobiological and meteorological data from this arid region in 2010-2014 was determined. The aerobiological study revealed the presence of two distinct peaks responsible for pollen symptoms. The flowering of this taxon is especially noteworthy in the city of Cartagena, where it supposes 94% of the total pollen collected in these periods. This situation converts Amaranthaceae pollen in the second leading cause of hay fever in the Southeast of Spain. With the expansion of aridity, an increase in the presence of these species is expected. Bearing in mind their prevalence in the spring and summer/autumn periods and their extensive presence in the bioaerosol, this makes data from Southeastern Spanish a benchmark with respect to the aerobiology of this type of pollen., (Copyright © 2017 Elsevier B.V. All rights reserved.)

PM10 from a suburban site in the northwest of Spain was assessed using data from chemical determinations, meteorological parameters, aerosol maps and five-day back trajectories of air masses. Temporal variations in the chemical composition of PM10 were subsequently related to stationary/mobile local sources and long-range transport stemming from Europe and North Africa. The presence of secondary inorganic species (sulphates, nitrates and ammonium) in airborne particulate matter constituted one of the main focuses of this study. These chemical species formed 16.5% of PM10 on average, in line with other suburban background sites in Europe. However, a maximum of 47.8% of PM10 were recorded after several days under the influence of European air masses. Furthermore, the highest values of these three chemical species coincided with episodes of poor air circulation and influxes of air masses from Europe. The relationship between SO 4 2- and NH 4 + (R 2  = 0.57, p-value<0.01) was found to improve considerably in summer and spring (R 2  = 0.88 and R 2  = 0.87, respectively, p-value<0.01), whereas NO 3 - and NH 4 + (R 2  = 0.55, p-value<0.01) reproduced this pattern in winter (R 2  = 0.91, p-value<0.01). The application of a receptor model to the dataset led to the identification of notable apportionments due to road traffic and other types of combustion processes. In fact, large amounts of particulate matter were released to the atmosphere during episodes of biomass burning in forest fires. On isolated days, combustion was estimated to contribute up to 21.0 μg PM/m 3 (50.8% of PM10). The contribution from industrial processes to this source is also worth highlighting given the presence of Ni and Co in its profile. Furthermore, African dust outbreaks at the sampling site, characterised by an arc through the Atlantic Ocean, were usually associated with a higher concentration of Al 2 O 3 in PM10. Results evidenced the relevance of stationary (i.e., steelworks and thermal power station) and mobile sources in the air quality at the suburban site under study, with important apportionments of particulate matter coming from road traffic and as consequence of releasing precursor gases of secondary particles to the atmosphere., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

To increase the production of methane, when cattle manure (CM) is digested, pretreatments can be applied and/or the manure can be co-digested with other wastes. In this research work, a mixture of CM, food waste (FW) and raw glycerine (Gly) in a proportion in weight of 87% CM, 10% FW and 3% Gly was digested, (a) without pretreatment and (b) with pretreatment by ultrasound, applying a sonication energy of 1040 kJ/kg total solids. Specific methane production was 290 L CH 4 /kg volatile solids (VS) without pretreatment and 520 L CH 4 /kg VS with pretreatment. With respect to the volumetric methane production, 1.07 L CH 4 /L reactor .day was produced in the first case, and in the second case, 1.98 L CH 4 /L reactor .day. We can conclude that the application of ultrasound pretreatment significantly improved the production of biogas.

Thirty-two chemical species were determined in PM 10 sampled at a suburban site on the north coast of Spain. Enrichment factors were applied to infer their soil/non-soil origin. The geochemical ratios were calculated using two databases: soil composition from locations in the surroundings of the sampling station and the Earth's average upper-crust composition. In the present study, dissimilarities were found between the enrichment factors obtained using these two databases. Al, Ti, La and Ce were taken as the reference elements to normalise the data, reaching analogous conclusions. Bi, Cd, Cu, Sb, Se, Sn and Zn were associated with predominantly non-soil apportionments. As the relevance of soil/non-soil sources for the other analysed elements was found to be variable, they were probably of mixed origin. Furthermore, pairs of elements showed strong relationships, thus pointing to a common origin. Na-Mg and Co-Ni, with Pearson correlation coefficients above 0.9, were respectively related to marine and industrial apportionments. Enrichment factors have proved to be a useful tool to distinguish the soil/non-soil origin of chemical species present in airborne particulate matter. However, the choice of the reference database for soil composition considerably determined the accuracy of the conclusions.

PM10 was sampled at a suburban location affected by traffic and industry in the north of Spain. The samples were analysed to determine the chemical components of PM10 (organic and elemental carbon, soluble chemical species and metals). The aim of this study was to assess the toxicity of PM10 in terms of the bulk analysis and the physico-chemical properties of the particles. Total carbon, sulphates, ammonium, chlorides and nitrates were found to be the major constituents of PM10. The contribution of the last of these was found to increase significantly with PM10 concentration (Pearson coefficient correlation of 0.7, p-value < 0.001). Individual airborne particles were characterised morphologically and chemically via a combination of Scanning Electron Microscopy and Energy-Dispersive X-ray spectroscopy (SEM-EDX). The subsequent image analysis revealed C-rich particles with shapes that pointed to combustion processes. Moreover, carbonaceous particles seemed to act as vehicles for sulphur compounds and metals (S, Na, Fe, Ca, Mg, K, Al, Mn, Zn and Cu). Coarse particles were found to be mainly constituted by crustal material and marine and carbonaceous particles. Although most of the studied individual particles in PM10 samples (86.0%) had a diameter within the 0.1-2.5 μm range, 1.8% of them had sizes lower than 0.1 μm 40.2% of the total studied particles were estimated to be inhaled and deposited in the human respiratory tract; 12.3% of these particles would reach the deepest zones, thereby posing a major risk to human health., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

PM10 and black smoke were monitored at a suburban sampling station located in the northern Spanish city of Gijón. Thirty-two metals and total carbon (TC) (i.e., organic carbon (OC) and elemental carbon (EC)) were analyzed over a year. The study of air-mass origin based on 5-day back trajectories was carried out to assess its influence on the recovery data. Different strategies were implemented to infer the influence of traffic in the area. On average, TC accounted for 29 % of the PM10 fraction, with OC forming 77 % of this TC. The influence of traffic was clearly reduced during intense Atlantic advection episodes, when OC and EC decreased up to 0.39 and 0.22 μg C/m(3), respectively. In contrast, the highest values were reported during regional episodes, exceeding 10 μg C/m(3) of OC and 2 μg C/m(3) of EC. The correlation between EC and OC was found to notably improve when considering the days with high traffic flow (from R (2) = 0.46 to R (2) = 0.74). This pattern was also reproduced by black smoke and EC (from R (2) = 0.49 to R (2) = 0.59). Cu and Sn were found to be reliable traffic tracers given their high dependence on EC (R (2) = 0.82 and R (2) = 0.79, respectively). Nevertheless, Sn, Ba, and Sb showed a better correlation with Cu than EC, suggesting a common origin. In the case of Sn, R (2) improved from 0.79 to 0.91. The Cu/Sb ratio had a mean value of 6.6 which agrees with diagnostic criterions for brake wear particles. The relationships and ratios between EC, Cu, Sb, Sn, Ba, and Bi pointed out to non-exhaust emissions, playing a significant role in the chemical composition of PM10. Brake wear was presented as the most likely origin for Cu, Sb, and Sn.

Primary, secondary and mixed sludge were treated by inverted phase fermentation. This treatment results in solid-liquid separation of sludge after endogenous enzymatic hydrolysis (anaerobic conditions: 42°C, 48 hours). The soluble chemical oxygen demand (sCOD) was increased in the solid phase up to 1,800%, 21,300% and 260% in primary, secondary and mixed sludge, respectively. The corresponding increase in sCOD in the liquid phase accordingly reached values of up to 440%, 5,100% and 140%. Phase separation led to an enrichment of volatile solids in the solid phase (89-358% primary sludge, 80-102% secondary sludge and 29-133% mixed sludge). The NH4+-N values increased notably after the endogenous enzymatic hydrolysis itself. To investigate the short-term evolution following the treatment, the variation in sCOD, NH4+-N and solids was also monitored after keeping the hydrolysate at 37°C under anaerobic conditions for 24 hours. This stage showed no generalized pattern in terms of sCOD.

Ultrasound treatment is often applied to enhance the anaerobic digestion of sludge. Optimal conditions for organic matter solubilisation of primary, secondary and mixed sludge were assessed by implementing ultrasound disruption at different specific energies (from 3,500 to 21,000 kJ/kgTS). The variation in soluble chemical oxygen demand (sCOD) and ammonium nitrogen (NH4+-N) was monitored following the treatment, and after a subsequent fermentation (24 h, 37 °C). The effect of the treatment was clearly more pronounced in secondary sludge than in the other types of sludge. Relatively minimal values in solubility were found when applying ultrasound at different energies depending on the sludge (3,500-7,000 kJ/kgTS in primary sludge and 10,500-14,000 kJ/kgTS in secondary sludge). This minimal value was not so noticeable in mixed sludge. The addition of inoculum was not required after ultrasound disruption in order to perform the subsequent fermentation. After this final stage, no general pattern in terms of sCOD was observed. Increases and decreases were conditioned by the coverage of the ultrasound irradiation; NH4+-N values increased notably during the fermentation.

This paper presents a study of the effect of applying ultrasound pre-treatment in the production of methane when co-digesting mixtures of cattle manure with food waste and sludge. A series of experiments were carried out under mesophilic and thermophilic conditions in continuously stirred-tank reactors containing 70% cattle manure, 20% food waste and 10% sewage sludge. Ultrasound pre-treatment allows operating at lower HRT, achieving higher volumetric methane yields: 0.85 L CH4/L day at 36°C and 0.82 CH4/L day at 55°C, when cattle manure and sewage sludge were sonicated. With respect to the non-sonicated waste, these values represent increases of up to 31% and 67% for mesophilic and thermophilic digestion, respectively., (Copyright © 2014. Published by Elsevier Ltd.)

Biochemical methane potential (BMP) tests have been carried out on sewage sludge from two wastewater treatment plants to assess the effect of additives (FeCl(3) and two cationic polyelectrolytes) used in sludge dewatering. BMP tests were also carried out on the concentrated solid phase from the enzymic hydrolysis pre-treatment (42 °C, 48 h). FeCl(3) had no significant effect on specific methane production, obtaining 242-246 LCH(4)/kgVSo. The effect of the combination of polyelectrolyte and FeCl(3) depended on the polyelectrolyte and the sludge, but generally led to an increase in specific methane production (25-40%). When enzymic hydrolysis was applied as a pre-treatment, specific methane production increased from 6.8% in the sludge containing FeCl(3) to 20% in the sludge without FeCl(3), although the increases were not statistically significant. In terms of LCH(4)/kgVS(rem), a general improvement was achieved both by means of additives and by enzymic hydrolysis. However, this improvement was only significant in the case of sludge which had undergone previous enzymic hydrolysis (62%) and in the untreated sludge containing a polyelectrolyte and FeCl(3) (24%). Cationic polyelectrolytes inhibited solid-liquid separation during enzymic hydrolysis and, although the presence of only FeCl(3) did not affect this separation, a significant decrease (32%) in LCH(4)/kgVSrem was observed.