Search

The geoenergy industry has challenging demands on cements used as downhole materials. Once placed in the annular space, the cement sheath must be very low permeability and mechanically durable. Its characteristics are strongly influenced by its microstructure. A holistic approach, including combined mineralogical, physical, and mechanical investigations, provides a better understanding of how these characteristics interplay. Class G cement was investigated and compared to cement formulations containing carbon black or silica fu me, trying to tailor its performance. The addition of carbon black and silica fume has some effect on the modal and chemical phase composition and results in a much denser microstructure. Furthermore, porosity is reduced while the pore size distribution remains similar. Samples containing carbon black have a reduced Young's modulus, indicating a more plastic behavior. The addition of silica fume increased both mechanical strength and permeability. However, comparable results can also be achieved by carefully tuning the water/cement ratio of the initial slurry. [ABSTRACT FROM AUTHOR]

Metal–carbon nanocomposites are identified as key contenders for enhancing water splitting through the oxygen evolution reaction and boosting supercapacitor energy storage capacitances. This study utilizes plasma treatment to transform natural graphite into nanoporous few-layer graphene, followed by additional milling and plasma steps to synthesize a cobalt–graphene nanocomposite. Comprehensive structural characterization was conducted using scanning and transmission electron microscopy, X-ray diffraction, Raman spectroscopy, gas sorption analysis and X-ray photoelectron spectroscopy. Electrochemical evaluations further assessed the materials' oxygen evolution reaction and supercapacitor performance. Although the specific surface area of the nanoporous carbon decreases from 780 to 480 m2/g in the transition to the resulting nanocomposite, it maintains its nanoporous structure and delivers a competitive electrochemical performance, as evidenced by an overpotential of 290 mV and a Tafel slope of 110 mV/dec. This demonstrates the efficacy of plasma treatment in the surface functionalization of carbon-based materials, highlighting its potential for large-scale chemical-free application due to its environmental friendliness and scalability, paving the way toward future applications. [ABSTRACT FROM AUTHOR]

This study considers the influence of purity and surface area on the thermal and oxidation properties of hexagonal boron nitride (h-BN) nanoplatelets, which represent crucial factors in high-temperature oxidizing environments. Three h-BN nanoplatelet-based materials, synthesized with different purity levels and surface areas (~3, ~56, and ~140 m2/g), were compared, including a commercial BN reference. All materials were systematically analyzed by various characterization techniques, including gas pycnometry, scanning electron microscopy, X-ray diffraction, Fourier-transform infrared radiation, X-ray photoelectron spectroscopy, gas sorption analysis, and thermal gravimetric analysis coupled with differential scanning calorimetry. Results indicated that the thermal stability and oxidation resistance of the synthesized materials were improved by up to ~13.5% (or by 120 °C) with an increase in purity. Furthermore, the reference material with its high purity and low surface area (~4 m2/g) showed superior performance, which was attributed to the minimized reactive sites for oxygen diffusion due to lower surface area availability and fewer possible defects, highlighting the critical roles of both sample purity and accessible surface area in h-BN thermo-oxidative stability. These findings highlight the importance of focusing on purity and surface area control in developing BN-based nanomaterials, offering a path to enhance their performance in extreme thermal and oxidative conditions. [ABSTRACT FROM AUTHOR]

The removal of contaminants from aqueous solutions by adsorption onto carbonaceous materials has attracted increasing interest in recent years. In this study, pristine and oxidized activated carbon (AC) fabrics with different surface textures and porosity characteristics were used for the removal of crystal violet (CV) dye from aqueous solutions. Batch adsorption experiments were performed to investigate the CV adsorption performance of the AC fabrics in terms of contact time, temperature, adsorbate concentration and adsorbent amount. Evaluation of the thermodynamic parameters and the adsorption performance of the AC fabrics in ground water and sea water solutions were also carried out. Langmuir isotherm model, pseudo first and pseudo second order kinetics models were utilized to analyze and fit the adsorption data. The introduction of oxygen-based functional groups on the surface of AC fabrics was carried out through a nitric acid treatment. This oxidation process resulted in a significant reduction in the surface area and pore volume, along with a small increase in the average pore size and a significant enhancement in the CV adsorption capacity, indicating that the dye molecules are mainly adsorbed on the external surface of the carbon fabrics. The herein evaluated 428 mg/g adsorption capacity at 55 °C for the oxidized non-woven AC fabric is one of the highest adsorption capacity values reported in the literature for CV removal using AC materials. Thermodynamic studies showed that the adsorption occurs spontaneously and is an endothermic and entropy-driven reaction. Furthermore, pristine and oxidized non-woven AC fabrics displayed more than 90% CV uptake from sea water samples, underlining the great potential these fabrics possess for the removal of dyes from natural/multicomponent waters. [ABSTRACT FROM AUTHOR]

In recent nanomaterials research, combining nanoporous carbons with metallic nanoparticles, like palladium (Pd), has emerged as a focus due to their potential in energy, environmental and biomedical fields. This study presents a novel approach for synthesizing Pd-decorated carbons using magnetron sputter deposition. This method allows for the functionalization of nanoporous carbon surfaces with Pd nano-sized islands, creating metal–carbon nanocomposites through brief deposition times of up to 15 s. The present research utilized direct current magnetron sputtering to deposit Pd islands on a flexible activated carbon cloth substrate. The surface chemistry, microstructure, morphology and pore structure were analyzed using a variety of material characterization techniques, including X-ray photoelectron spectroscopy, X-ray diffraction, Raman spectroscopy, gas sorption analysis and scanning electron microscopy. The results showed Pd islands of varying sizes distributed across the cloth's carbon fibers, achieving high-purity surface modifications without the use of chemicals. The synthesis method preserves the nanoporous structure of the carbon cloth substrate while adding functional Pd islands, which could be potentially useful in emerging fields like hydrogen storage, fuel cells and biosensors. This approach demonstrates the possibility of creating high-quality metal–carbon composites using a simple, clean and economical method, expanding the possibilities for future nanomaterial-based applications. [ABSTRACT FROM AUTHOR]

The adsorption of actinide ions (Am(III) and U(VI)) from aqueous solutions using pristine and oxidized carbon fabrics was investigated by means of batch experiments at different pH values (pH 4, 7 and 9) and temperatures (25, 35 and 45 °C) under ambient atmospheric conditions. The experimental results indicated that both the pH and the fabric texture affected the adsorption rate and the relative removal efficiency, which was 70% and 100% for Am(III) and U(VI), respectively. The Kd (L/kg) values for U(VI) were generally found to be higher (2 < log10(Kd)< 3) than the corresponding values for Am(III) adsorption (1.5 < log10(Kd) < 2). The data obtained from the experiments regarding the temperature effect implied that the relative adsorption for both actinides increases with temperature and that adsorption is an endothermic and entropy-driven reaction. The application of the fabrics to remove the two actinides from contaminated seawater samples showed that both the relative removal efficiency and the Kd values decreased significantly due to the presence of competitive cations (e.g., Ca2+ and Fe3+) and complexing anions (CO32−) in the respective waters. Nevertheless, the removal efficiency was still remarkable (50% and 90% for Am(III) and U(VI), respectively), demonstrating that these materials could be attractive candidates for the treatment of radionuclide/actinide-contaminated waters. [ABSTRACT FROM AUTHOR]

A variety of advanced manufacturing processes have been developed based on the concept of rapid solidification processing (RSP), such as uniform droplet spraying (UDS) for the additive manufacturing of metals and alloys. This article introduces a morphological simulation of fractal dendric structures deposited by UDS of magnesium (Mg) alloys on two-dimensional (2D) planar sections. The fractal structure evolution is modeled as Apollonian packs of generalized ellipsoidal domains growing out of nuclei and dendrite arm fragments. The model employs descriptions of the dynamic thermal field based on superposed Green's/Rosenthal functions with source images for initial/boundary effects, along with alloy phase diagrams and the classical solidification theory for nucleation and fragmentation rates. The initiation of grains is followed by their free and constrained growth by adjacent domains, represented via potential fields of level-set methods, for the effective mapping of the solidified topology and its metrics (grain size and fractal dimension of densely packed domains). The model is validated by comparing modeling results against micrographs of three UDS-deposited Mg–Zn–Y alloys. The further evolution of this real-time computational model and its application as a process observer for feedback control in 3D printing, as well as for off-line material design and optimization, is discussed. [ABSTRACT FROM AUTHOR]

Coffee, as one of the most traded resources, generates a vast amount of biogenic by-products. Coffee silver skins (CSS), a side stream from the roasting process, account for about 4 wt.%. Despite the abundancy of CSS, possible routes to generate added value for broad applications are limited. Herein, we present an approach to use CSS as a precursor material for supercapacitor electrodes. KOH activated carbon (AC) was produced from CSS. The resulting AC—CSS was characterized by X-ray diffraction, gas sorption analysis, scanning electron microscopy, and Raman spectroscopy. The highly porous AC—CSS exposes a specific surface area of more than 2500 m2 g−1. Electrodes formed with AC—CSS were electrochemically characterized by performing cyclic voltammetry and galvanostatic cycling. The electrodes were further assembled into a supercapacitor device and operated using 1 M sulfuric acid as electrolyte. In addition, various quinones were added to the electrolyte and their impact on the capacitance of AC—CSS electrodes was analyzed. In this work, we were able to show that CSS are a valuable source for supercapacitor applications and that coffee-waste-derived quinones can act as capacitance enhancers. Thus, the findings of this research show a valuable path towards sustainable and green energy storage solutions. [ABSTRACT FROM AUTHOR]

This study investigates the capability of the Southeast Mesohellenic Trough (SE MHT) sandstone formations to serve as a potential reservoir for CO2 storage in response to the emerging climate change issues by promoting environmentally friendly mineral sequestration applications. Sandstone samples, for the first time, were evaluated for their petrographic characteristics, mineral chemistry, geochemical properties, as well as their petrophysical and gas adsorption properties through tests. The sandstones were tested and classified into distinct groups. The most promising site to be considered for pilot CO2 storage testing is the Pentalofos Formation locality since its sandstones display specific mineral phases with the proper modal composition to conceivably react with injected CO2, leading to the development of newly formed and stable secondary mineral phases. The gas adsorption results are also more encouraging for sandstones from this sedimentary formation. All the measured UCS (uniaxial compressive strength), Ei (bending stiffness), and ν (Poisson's ratio) results are above those dictated by international standards to perform CO2 storage practices safely. Furthermore, the specified targeted locality from the Pentalofos Formation holds the geological advantage of being overlaid by an impermeable cap-rock formation, making it suitable for deploying CO2 mineralization practices. The demarcated area could permanently store a calculated amount of ~50 × 105 tons of CO2 within the geological reservoir by reacting with the specified mineral phases, as specified through the proposed petrographic PrP index (potential reactive phases). [ABSTRACT FROM AUTHOR]

The current paper presents a combined ab initio and experimental study of H 2 adsorption on carbon. Adsorption energetics of a H 2 molecule on pristine graphene were obtained for various molecule orientations, showing that the perpendicular-to-surface orientation is energetically more preferable ( E ads  = −0.076eV/H 2 ) than the parallel orientations ( E ads ≈−0.071eV/H 2 ). Subsequently, B, Co, Ni, Pd, Pt and Ru substituents of a C atom in graphene were considered, leading to the conclusion that Pt and Ru promote the H 2 adsorption by ≈−0.012eV/H 2 . Pt promotes adsorption in all its neighbouring hexagons, while Ru impact is localised to the position directly above the dopant. Pure, Pt and Ru-doped ordered mesoporous carbon samples were evaluated experimentally for their H 2 adsorption performance under a low-pressure regime (up to 1 bar) at cryogenic and room temperatures ( i.e., 77 and 298 K, respectively). These experimental measurements indicated that, while the specific area of the metal-decorated carbons is lower than that of the pristine carbon material, the presence of Pt and Ru nanoparticles leads to a slight improvement of the H 2 uptake performance at room temperature. [ABSTRACT FROM AUTHOR]

Hexagonal boron nitride (h-BN) nanoplatelets with ~ 99 wt.% purity, 900 to 2000 nm particle width, 30 to 90 nm particle thickness, ~ 213 m 2 /g specific surface area (SSA), ~ 66% micropore SSA and ~ 0.85 nm average pore size were synthesized in a powder form using H 3 BO 3 and CO(NH 2 ) 2 as precursors followed by consecutive thermal treatments under inert and oxidized atmospheres. Thermal gravimetric analysis (TGA) combined with differential scanning calorimetry (DSC), under synthetic air-flow and up to ~ 1300 °C, were employed to evaluate both purity and oxidation resistance of the product directly upon its synthesis. The h-BN powder was collected at the stage of its highest purity which, based on TGA-DSC data, corresponded to an additional heat treatment up to ~ 700 °C. The active oxidation seems to occur in the temperature range between ~ 860 and ~ 1000 °C, followed by formation of B 2 O 3 in the final residue. Subsequently, the purified h-BN powder was extensively characterized for its structure, morphology and porosity using X-ray diffraction, scanning electron microscopy and nitrogen gas adsorption/desorption measurements at 77 K, respectively. As briefly discussed, purity and SSA seem to have a crucial role in the thermal stability and oxidation resistance of BN materials in general. [ABSTRACT FROM AUTHOR]

In the present work, a nanoporous (pore width ~ 0.7 nm) graphene-based sponge-like material with large surface area (~ 350 m 2 /g) was synthesized by wet chemical reduction of graphene oxide in combination with freeze-drying. Surface morphology and elemental composition were studied by scanning and transmission electron microscopy combined with energy dispersive X-ray spectroscopy. Surface chemistry was qualitatively examined by Fourier-transform infrared spectroscopy, while the respective structure was investigated by X-ray diffraction analysis. Textural properties, including Brunauer–Emmet–Teller (BET) surface area, micropore volume and surface area as well as pore size distribution, were deduced from nitrogen gas adsorption/desorption data obtained at 77 K and up to 1 bar. Potential use of the spongy graphene for gas storage and separation applications was preliminarily assessed by low-pressure (0–1 bar) H 2 , CO 2 and CH 4 sorption measurements at different temperatures (77, 273 and 298 K). The adsorption capacities for each gas were evaluated up to ~ 1 bar, the isosteric enthalpies of adsorption for CO 2 (28–33 kJ/mol) and CH 4 (30–38 kJ/mol) were calculated using the Clausius–Clapeyron equation, while the CO 2 /CH 4 gas selectivity (up to 95:1) was estimated using the Ideal Adsorbed Solution Theory (IAST). [ABSTRACT FROM AUTHOR]

Nanotubes made of boron nitride (BN) and carbon have attracted considerable attention within the literature due to their unique mechanical, electrical and thermal properties. In this work, BN and carbon nanotubes, exhibiting high purity (>99%) and similar surface areas (~200 m2/g), were systematically investigated for their thermal stability and oxidation behavior by combining thermal gravimetric analysis and differential scanning calorimetry methods at temperatures of up to ~1300 °C under a synthetic air flow environment. The BN nanotubes showed a good resistance to oxidation up to ~900 °C and fully transformed to boron oxide up to ~1100 °C, while the carbon nanotubes were stable up to ~450 °C and almost completely combusted up to ~800 °C. The different oxidation mechanisms are attributed to the different chemical nature of the two types of nanotubes. [ABSTRACT FROM AUTHOR]

Multifunctional materials for energy conversion and storage could act as a key solution for growing energy needs. In this study, we synthesized nanoflower-shaped iron-nickel sulfide (FeNiS) over a nickel foam (NF) substrate using a facile hydrothermal method. The FeNiS electrode showed a high catalytic performance with a low overpotential value of 246 mV for the oxygen evolution reaction (OER) to achieve a current density of 10 mA/cm2, while it required 208 mV at 10 mA/cm2 for the hydrogen evolution reaction (HER). The synthesized electrode exhibited a durable performance of up to 2000 cycles in stability and bending tests. The electrolyzer showed a lower cell potential requirement for a FeNiS-Pt/C system (1.54 V) compared to a standard benchmark IrO2-Pt/C system (1.56 V) to achieve a current density of 10 mA/cm2. Furthermore, the FeNiS electrode demonstrated promising charge storage capabilities with a high areal capacitance of 13.2 F/cm2. Our results suggest that FeNiS could be used for multifunctional energy applications such as energy generation (OER and HER) and storage (supercapacitor). [ABSTRACT FROM AUTHOR]

To contribute to solving global energy problems, a multifunctional CoFe2O4 spinel was synthesized and used as a catalyst for overall water splitting and as an electrode material for supercapacitors. The ultra-fast one-step electrodeposition of CoFe2O4 over conducting substrates provides an economic pathway to high-performance energy devices. Electrodeposited CoFe2O4 on Ni-foam showed a low overpotential of 270 mV and a Tafel slope of 31 mV/dec. The results indicated a higher conductivity for electrodeposited compared with dip-coated CoFe2O4 with enhanced device performance. Moreover, bending and chronoamperometry studies suggest excellent durability of the catalytic electrode for long-term use. The energy storage behavior of CoFe2O4 showed high specific capacitance of 768 F/g at a current density of 0.5 A/g and maintained about 80% retention after 10,000 cycles. These results demonstrate the competitiveness and multifunctional applicability of the CoFe2O4 spinel to be used for energy generation and storage devices. [ABSTRACT FROM AUTHOR]

Abstract Significant efforts have been focused on the search of earth-abundant elements to solve growing energy issues and to provide bifunctional behavior for both hydrogen and oxygen evolution reaction. Mixed transition metals could provide promising synergistic electrochemical properties and serve as bi-catalyst for overall water splitting process. In this study, a needle grass array of nanostructured nickel cobalt sulfide (NiCo 2 S 4) was synthesized using a hydrothermal process. The synthesized NiCo 2 S 4 electrodes showed promising electrocatalytic activity with a low overpotential of 148 mV and 293 mV for hydrogen and oxygen evolution reactions, respectively. The electrolyzer cell consisting of two NiCo 2 S 4 electrodes displayed excellent performance with high electrochemical stability and low overall cell potential of 1.61 V to achieve a current density of 10 mA/cm2. Our study suggests that mixed transition metal chalcogenides such as NiCo 2 S 4 could be used as efficient and stable electrocatalyst for overall water splitting process. Graphical abstract Unlabelled Image Highlights • A needle grass array of nanostructured nickel cobalt sulfide (NiCo 2 S 4) was synthesized using a hydrothermal process. • NiCo 2 S 4 electrodes showed promising electrocatalytic activity. • The electrolyzer cell displayed excellent performance with high electrochemical stability. [ABSTRACT FROM AUTHOR]