Search

Rapid, simple, and low-cost screening procedures are necessary for the detection of harmful compounds in the effluent that flows out of point sources such as industrial outfall. The present study investigated the effects on a novel sensor of harmful compounds such as KCN, phenol, and herbicides such as 3-(3,4-dichlorophenyl)-1,1-dimethylurea (DCMU), 2-chloro-4-ethylamino-6-isopropylamino-1,3,5-triazine (atrazine), and 2-N-tert-butyl-4-N-ethyl-6-methylsulfanyl-1,3,5-triazine-2,4-diamine (terbutryn). The sensor employed an electrode system that incorporated the photocurrent of intra-cytoplasmic membranes (so-called chromatophores) prepared from photosynthetic bacteria and linked using carbon paste electrodes. The amperometric curve (photocurrent-time curve) of photo-induced electron transfer from chromatophores of the purple photosynthetic bacterium Rhodobacter sphaeroides to the electrode via an exogenous electron acceptor was composed of two characteristic phases: an abrupt increase in current immediately after illumination (I₀), and constant current over time (Ic). Compared with other redox compounds, 2,5-dichloro-1,4-benzoquinone (DCBQ) was the most useful exogenous electron acceptor in this system. Photo-reduction of DCBQ exhibited Michaelis-Menten-like kinetics, and reduction rates were dependent on the amount of DCBQ and the photon flux intensity. The Ic decreased in the presence of KCN at concentrations over 0.05 μM (=μmol·dm(-3)). The I₀ decreased following the addition of phenol at concentrations over 20 μM. The Ic was affected by terbutryn at concentrations over 10 μM. In contrast, DCMU and atrazine had no effect on either I₀ or Ic. The utility of this electrode system for the detection of harmful compounds is discussed.

Gold nanocrystals are promising as catalysts and for use in sensing/imaging systems, photonic/plasmonic devices, electronics, drug delivery systems, and for photothermal therapy due to their unique physical, chemical, and biocompatible properties. The use of various organic templates allows control of the size, shape, structure, surface modification and topology of gold nanocrystals; in particular, currently the synthesis of gold nanorods requires a cytotoxic surfactant to control morphology. To control the shape of gold nanocrystals, we previously demonstrated the de novo design and synthesis of a β-sheet-forming nonapeptide (RU006: Ac-AIAKAXKIA-NH2, X=L-2-naphthylalanine, Nal) and the fabrication of gold nanocrystals by mixing RU006 and HAuCl4 in water. The reaction afforded ultrathin gold nanoribbons 50-100 nm wide, several nanometers high, and microns long. To understand the mechanism underlying gold nanoribbon formation by the RU006 system, we here report (i) the effects of replacement of the Nal aromatic side chain in the RU006 sequence with other aromatic moieties, (ii) the electrochemical properties of aromatic side chains in the de novo designed template peptides to estimate the redox potential and number of electrons participating in the gold crystallization process, and (iii) the stoichiometry of the RU006 system for gold nanoribbon synthesis. Interestingly, RU006 bearing a naphthalene moiety (oxidation peak potential of 1.50 V vs Ag/Ag(+)) and an analog [Ant(6)]-RU006 bearing a bulky anthracene moiety (oxidation peak potential of 1.05 V vs Ag/Ag(+)) allowed the growth of anisotropic (ribbon-like) and isotropic (round) gold nanocrystals, respectively. This trend in morphology of gold nanocrystals was attributed to spatially-arranged hydrophobic cavities sufficiently large to accommodate the gold precursor and to allow directed crystal growth driven by cross-linking reactions among the naphthalene rings. Support for this mechanism was obtained by decreasing the mole fraction of [Ant(6)]-RU006 against the total concentration of [Ant(6)]-RU006 and [Phe(6)]-RU006: absorption spectra similar to that for RU006 were obtained. Differences in the redox properties of the anthracene and naphthalene moieties scarcely affected morphology. We propose that construction of an appropriate hydrophobic cavity is important for templating gold nanocrystal architectures by peptide self-assembly. This mechanism would be applicable for developing simple, low toxicity, mild synthetic methods for constructing metallic nanomaterials for therapeutic use., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Flow systems for precise and accurate coulometric determinations of ions that were developed on the basis of electrolytic ion transfer at the aqueous|organic solution (W|O) interface are reviewed. The electrolysis cell in the system is composed of a porous poly(tetrafluoroethylene) tube (1.0 mm inner diameter), a metal wire (0.8 mm diameter) inserted into the tube, O into which the tube is immersed, a reference electrode in O and a platinum wire counter electrode in O. The electrolysis is carried out by forcing W containing a species of interest to flow through the narrow gap between the tube and the metal wire. The coulometric determination can be performed with an efficiency of more than 99% and a precision of better than 0.2% based on the ion transfer under an optimum condition, even if the ion is redox inert such as Na(+), K(+), Mg(2+), Ca(2+), ClO(4)(-), picrate or alkylsulfonates. The system can be applied to selective electrolytic solvent extraction of ions.

A simple column electrode, S-CE, with a glassy carbon fibers working electrode stuffed into a Teflon tube was developed. The current-potential curves for the reductions of [Fe(CN)(6)](3-) and Fe(3+) observed at the S-CE were analyzed based on a theory for those at an ordinary column electrode. A quantitative electrolysis was performed at the S-CE rapidly within 20 s. An accurate and precise coulometric determination could be attained at the S-CE even with a fairly dilute solution. For example, coulometric reductions of 5 x 10(-5) and 5 x 10(-6) M Fe(3+) were attained with efficiencies (n = 5) of 99.7 +/- 0.2 and 101.9 +/- 1.1%, respectively.