Search

In this paper, we numerically and experimentally demonstrate a substrate integrated plasmonic waveguide (SIPW) concept and its application in microwave bandpass filters. This SIPW consists of double arrays of slots etched on the top and bottom metal layers of a substrate integrated waveguide (SIW) to support spoof surface plasmon polariton (SSPP) modes with low and high cutoff frequencies. The simulated results show that by tuning the parameters of the SIPW's unit cell, the dispersion characteristics can be engineered at will. Then, we propose a sharp roll-off microwave bandpass filter based on this SIPW. This filter has a passband from 7.5 to 13.0 GHz with high return loss and low insertion loss. Furthermore, to demonstrate the independent tuning of the passband of the filter, we also design two microwave bandpass filters with passbands of 9.2-13.0 GHz and 7.5-10.5 GHz by decreasing the distance between two rows of via holes and increasing the slot length, respectively. Finally, to experimentally validate the filter designs, we fabricate and measure three prototypes and find that the experimental results are in excellent agreement with the simulations. This SIPW concept may have extensive potential applications in the development of various plasmonic integrated functional devices and circuits.

In this paper, a novel planar waveguide based on spoof surface plasmon polaritons (SSPPs) using fish-bone corrugated slot structure is first proposed in the microwave region. Low-dispersion band can be realized by such structure with tight field confinement of SSPPs, resulting in size miniaturization of the proposed waveguide. The high frequency stopband of the proposed ultra-wideband bandpass filter (BPF) is created by using this proposed waveguide, while the low frequency stopband is properly designed through introducing the microstrip-to-slotline transition. The 2-D E-fields distribution, surface current flow, and energy flow patterns are all calculated and illustrated to demonstrate the electromagnetic (EM) characteristics of the proposed ultra-wideband BPF. The BPF tuning characteristics is explored to provide a guideline for facilitating the design process. To validate the predicted performance, the proposed filter is finally designed, fabricated, and measured. Measured results illustrate high performance of the filter, in which the reflection coefficient is better than -10 dB from 2.1 to 8 GHz with the smallest insertion loss of 0.37 dB at 4.9 GHz, showing good agreement with numerical simulations. The proposed surface plasmon polariton waveguides are believed to be significantly promising for further developing plasmonic functional devices and integrated 2-D circuits with enhanced confinement of SSPPs in microwave and even terahertz bands.

A dual-layer patch antenna using multiple parasitic patches for the bandwidth enhancement is presented. Two additional resonances can be obtained with the help of the parasitic patches of the antenna. Consequently, a wide impedance bandwidth of 17% (|S11|

A tunable dual-band bandstop filter (BSF) in the far-infrared region is proposed based on a graphene surface plasmon. The BSF consists of a graphene waveguide and two graphene-ribbon resonators on the SiO2/Si substrate, supporting waveguide mode and edge mode, respectively. The influence of graphene structure parameters on transmission spectra is numerically investigated, which shows that the resonant properties are sensitive to the lengths of the graphene-ribbon resonators, and each stopband of dual-band BSF can be individually designed and tuned without affecting the other stopband. Moreover, the center frequencies of the two stopbands can be actively tuned independently by respective chemical potential of graphene-ribbon resonators. The proposed filter structure is promising to be utilized in future photonic integrated circuit applications as an ultracompact dual-band BSF.

A compact triplexer based on E-stub-loaded composite right-/left-handed (ESL-CRLH) resonators with quasi-lumped impedance matching network is presented in this paper. The equivalent circuit model of the ESL-CRLH resonator is presented first and its left-/right-handed capacitance/inductance elements are fully derived. Then, a quasi-lumped impedance matching circuit is designed to connect the three ESL-CRLH resonator based filter channels for the triplexer construction. Finally, the designed triplexer obtains high isolations among the ports and low in-band insertion losses of the three filter channels centered at 1.86, 2.41, and 3.25 GHz, of which a miniaturized layout has been realized. Good agreement between the simulated and measured results can be observed to validate the design idea.

Two novel microstrip patch antennas with multiple parasitic patches and shorting vias have been presented for the bandwidth enhancement. Based on the conventional triangular patch antenna, two more resonances can be obtained with the introduction of multiple parasitic patches, and consequently, the antenna bandwidth can be broadened. Parametric analysis of the patches has been studied for the verification of bandwidth enhancement. An example of the proposed antenna with multiple parasitic patches is designed, fabricated, and tested. The measured bandwidth with $\vert S_{11}\vert < -10$ dB ranges from 5.46 to 6.27 GHz (13.8%), and good far-field radiation patterns can be obtained within the frequency band. In addition, two shorting vias are inserted into the above proposed antenna to decrease the input impedance, resulting in further bandwidth enhancement of the antenna. This antenna is fabricated and tested as well, which achieves a measured 10-dB impedance bandwidth of 17.4% from 5.5 to 6.55 GHz.

Double dipoles on a single-layer substrate are utilized to construct a triple-mode printed quasi-Yagi antenna for the multi-band and broadband antenna applications. A stub-loaded dipole generating two resonant modes (i.e., lower dual-mode dipole) is allocated on the underside of a simple dipole (i.e., upper single-mode dipole) introducing the third resonant mode. Using these three resonant modes, three compact printed quasi-Yagi antennas, i.e., tri-band, dual-band, and broadband printed quasi-Yagi antennas, are designed with the same antenna prototype but different parameter values. Seen from the measured results, all of these three antennas have good unidirectional radiations, high radiation efficiencies, and low cross-polarization levels at the operating frequencies within the impedance bandwidths.

On the basis of a single multimode resonator (MMR), a miniaturised microstrip sext‐band bandpass filter (BPF) with high band‐to‐band isolations has been presented. The proposed MMR is an stepped impedance resonator (SIR) with one short‐circuited stub loaded in the middle and two identical open‐circuited stubs located at two sides. Transmission poles (TPs) and transmission zeros (TZs) can be excited when the electrical lengths of two open stubs increase. The TZs introduced by open stubs separate the TPs into multiple groups; therefore, the design of a sext‐band BPF becomes available. Moreover, two input/output tapped branches and radical stub‐loaded short‐circuited lines are treated as perturbation structures in order to increase design freedoms for improving filter performance. Good agreement between simulated and measured results validates the design method.

In this paper, a new design method of E-plane waveguide bandpass filter (BPF) using high-order modes of spoof surface plasmon polaritons (SSPPs) is proposed. The high-order modes of the double-layer SSPP (DL-SSPP) unit cell can be effectively manipulated by adjusting the dimensions of grounded metallic patterns in SSPP array, which mainly determines the filtering characteristics of E-plane waveguide BPFs. For improving the out-of-band rejection, two extra transmission zeros (TZs) are designed at the upper and lower stopbands of E-plane waveguide BPF, and then the operating mechanism of TZs is clearly investigated. Moreover, the filtering characteristics of the E-plane waveguide BPF with different transition parts are discussed to demonstrate the generalization of proposed design method. To verify the design feasibility, two examples of E-plane waveguide BPF are fabricated and measured. Good agreement between measurements and simulations shows that the proposed design method possesses good potential for the applications of high-performance E-plane waveguide BPF design.

Abstract A low‐cost W‐band leaky‐wave antenna with two‐dimensional scanning capability is presented. By using the low‐loss transversal long‐slot array structure with a single‐layer parabolic reflector, the antenna realizes a passband from 85 to 102.8 GHz with Voltage Standing Wave Ratio

Metamaterials, an artificial electromagnetic (EM) material, have exhibited unique characteristics, enabling innovations in terahertz (THz) wavefront shaping, polarization modulation, surface wave manipulation, and spectrum modulation. In this review, we focus on the advancements in THz metamaterials for spectrum modulation, emphasizing their structural design, special materials, and applications. The review discusses various structural designs, including metal-dielectric composite structures, all-metal structures, and all-dielectric structures, each offering distinct advantages for THz applications. Key special materials such as graphene, vanadium dioxide (VO2), molybdenum disulfide (MoS2), and flexible materials are highlighted for their significant contributions to enhancing the performance and functionality of THz metamaterials. The applications of THz metamaterials in EM stealth and sensing are thoroughly introduced, with a particular focus on biosensing, pesticide detection, and other sensing applications. The review emphasizes the potential of THz metamaterials in developing highly sensitive and selective sensors, as well as efficient THz absorbers and filters. Future perspectives include the continuous development of novel materials, advanced fabrication technologies, and the integration of multifunctional capabilities to further expand the applications and efficiency of THz metamaterials. These advancements are expected to drive significant progress in THz technology, impacting fields such as medical diagnostics, environmental monitoring, food safety, wireless communication, and security.

Due to their inherent defects, circular polarization discrimination methods involving amplitude-phase or axial ratio are obstacles of the computer software-based optimal design of broadband linear-to-circular (LTC) polarization conversion metasurfaces. Therefore, based on the proposed circular polarization discrimination method relating to ellipticity angle β, this study exploits Python-programmed elitist preserving genetic algorithm to optimally design a reflective-type broadband LTC polarization conversion metasurface. The simulation results demonstrate that the final metasurface can realize the wideband LTC polarization conversion; the measured results are in excellent agreement with the simulations, thus validating the proposed design method. It provides an efficient alternative for broadband LTC polarization conversion metasurface designs, which drives the development of the design of LTC polarization conversion metasurfaces from manual methods towards automation. And this work can be applied in antenna designs, optical devices, and remote sensing.

A high-gain circularly polarized (CP) magnetoelectric (ME) dipole antenna with metallic radiating structure is presented. The proposed CP antenna element consists of two pairs of metallic posts with a supporting metallic plate, a metallic air-filled elliptical cavity, and a feeding slot on the bottom substrate integrated waveguide (SIW). The two pairs of modified rectangular metallic posts combined with the gaps between them act as radiating ME-dipoles which are surrounded by a metallic air-filled elliptical cavity. The above-mentioned radiating structures are fed by a modified cross-shaped coupling slot etched on the bottom feeding SIW to generate CP radiation, where loading the elliptical metallic cavity significantly improve the CP performance of the antenna element. Then, a 4 × 4 antenna array with full-corporate feeding network is designed, fabricated, and measured, which has an impedance bandwidth of 18.9 % from 37.4 to 45.2 GHz and a 3-dB axial ratio (AR) bandwidth of 14.2 % from 36 to 41.5 GHz. Thanks to the all-metal radiating structures, a maximum measured gain of 20.4 dBic has been achieved. The measured and simulated results are in good agreement.

Abstract A compact 60‐GHz on‐chip bandpass filter (BPF) is presented using gallium arsenide (GaAs) technology. To demonstrate the working mechanism of the proposed BPF, an inductor‐capacitor (LC) equivalent circuit model is conceived and analysed for further investigation of the transmission poles (TPs) and zeros. Finally, a prototype of the BPF is fabricated and tested to validate the proposed idea, whose simulated and measured results are in good agreement. The measurements show that it has a centre frequency of 60.2 GHz with a bandwidth of 14%, and the minimum insertion loss (IL) within the passband is 2.57 dB. The chip size, excluding the feedings, is about 0.265 mm × 0.184 mm.

Abstract This work outlines the design, implementation, and experimental results of a Class‐F power amplifier (PA) with a novel output matching topology by utilizing substrate integrated waveguide (SIW). The design methodology is first proposed with one highly integrated SIW matching structure. The impedances at fundamental, second harmonic and third harmonic frequencies are analysed to explain good impedance matching for the PA as well as the isolation mechanism of the direct current (DC) and radio frequency (RF). For demonstration, an S‐band 10‐W Class‐F PA is fabricated and tested. The simulation and measurement results agree very well with each other, which verifies the proposed technology of SIW output matching. To the authors’ knowledge, this is the first time to use a highly integrated SIW matching in Class‐F PA, which simplifies the output matching for third‐order harmonics and DC/RF isolation structures.

Abstract The letter presents a triple‐mode short‐circuited circular patch resonator for bandpass filter (BPF) design. The resonator employs the TM010 mode as its dominant mode, the resonant frequency of which is lower than that of the TM110 mode. In addition, four radial slots are etched on the patch to extend the current paths of the TM110 and TM210 modes, shifting down the resonant frequencies of the two modes. The adjacent triple modes can be used to design wideband BPF. Meanwhile, the centre frequency (CF) and bandwidth (BW) can be tuned by the length of the slots. Furthermore, the short‐circuited vias are arranged in a circle providing a tuneable parameter to control the CF and BW as well. According to the symmetry of the geometry, the resonator can be bisected to realise half‐mode resonance. Two cascaded half‐mode semi‐circular patch resonators are applied to design BPF with high selectivity. BPFs using the circular patch resonator and the semi‐circular patch resonator are designed and measured for demonstration.

A high-selectivity bandpass filter (BPF) based on two merged ring resonators is presented in this paper. The structure of this proposed BPF can be seen as the two one-wavelength ring resonators merged each other by sharing the common λg/2 microstrip line. Due to symmetric structure, it can be analyzed by even- and odd-mode method and the locations of six transmission zeros are calculated using input impedance deductions. For further demonstration, a BPF example centered at 2 GHz is fabricated with high frequency selectivity. The measured 3-dB fractional bandwidth is 11% (1.89-2.11 GHz) and insertion loss is less than 2 dB in the passband. Good agreement between simulation and measurement verifies the feasibility of the design method. [ABSTRACT FROM AUTHOR]

A novel synthesis method is proposed to design multi-band bandpass filters (BPFs) using an L-C ladder prototype lowpass filter loaded with two symmetric shorted stubs. The transmission zeros (TZs) are produced by the shorted stubs, which are used to realize multiple passbands. By controlling the number of the open stubs loaded on the shorted stub, the number of TZs is exactly determined. Therefore, multi-band BPF is easy to be obtained by increasing the number of the open stubs. The TZs can be adjusted by optimizing the L-C values of the equivalent circuit of the proposed filter to tune the center frequencies of each passband independently. The proposed BPF also has wide upper stopband. For demonstration, an octa-band BPF is designed and manufactured. The measured results show good agreement with the simulated ones. [ABSTRACT FROM AUTHOR]

A compact bandstop filter (BSF) using parallel-coupled lines and open stubs with four transmission poles (TPs) is proposed. Through theoretical equation deduction, the positions of these four TPs can be obtained. Good roll-off skirts and stopband suppression characteristics of the BSF can be realised with the help of multiple TPs. To improve transition band roll-off rates, another BSF with five TPs is designed, where a short-circuited T-stub is loaded on the middle of the above BSF circuit structure. For demonstration, two filter examples with centre frequencies at 2 and 1.8 GHz are implemented with generation of four and five TPs, respectively, for theoretically calculated certification. Good agreement between simulated and measured results validates the design method. [ABSTRACT FROM AUTHOR]

A high selectivity bandpass filter with multiple transmission poles (TPs) and transmission zeros (TZs) has been presented. By employing three pairs of parallel-coupled lines and two shorted stubs, sharp roll-off skirts and high stopband rejections can be achieved with five TPs and ten TZs. Theoretical analysis is explained and simulated results are illustrated on this high-performance filter. Finally, a bandpass filter example with center frequency of 2.15 GHz and 3-dB fractional bandwidth of 19% is designed, fabricated, and measured. It is shown that the measured transition band roll-off rates are better than 425 dB/GHz. Good agreement between the simulations and measurements validates the design method. [ABSTRACT FROM AUTHOR]

A fifth-order bandpass filter (BPF) with super high selectivity using three pairs of coupled lines and two open stubs is proposed. Twelve transmission zeros (TZs) from 0 to 2f0 (f0 denotes center frequency of the passband) and five transmission poles (TPs) in the passband can be obtained to realize good out-of-band suppression and sharp roll-off skirts. For demonstration, a simple BPF prototype centered at 2.04 GHz is designed, fabricated with measured 3-dB fractional bandwidth of 18% and very high transition band roll-off rates of over 567 dB/GHz. Good agreement between the simulations and measurements validates the design method. [ABSTRACT FROM AUTHOR]

A multi-functional microstrip-fed ultrawideband (UWB) monopole antenna has been presented. By loading two dual-mode resonators and shunt metallic strips on the reference UWB antenna, two additional operational states are created, including band-notched UWB response (i.e., 3.1~11.5 GHz passband response except the notched band of 5.15~5.8 GHz) and narrow bandpass response (5.5-5.95 GHz) with high frequency selectivity. Moreover, the frequency characteristics of bandpass filtering antenna is also studied when we solder two lumped-chip 0 Ω resistors instead of the shunt metallic strips. Four antenna prototypes are designed, fabricated and measured to validate the design concept. Full-wave electromagnetic simulator HFSS is used for the antenna design optimization and performance prediction. The measured results are presented including return losses, gains and radiation patterns, declaring that the proposed antennas have good impedance matching performance and radiation patterns. [ABSTRACT FROM AUTHOR]

A novel planar ultra-wideband (UWB) bandpass filter (BPF) using radial-stub-loaded resonator is proposed, where the resonator consists of three radial stubs, one located in the middle and two symmetrically at both sides. This radial-stub-loaded structure situates the first four resonant modes in the UWB passband (3.1~10.6 GHz) and makes the fifth resonant mode far away from this passband. To enhance the coupling degree, two interdigital coupled feed lines are utilized in this UWB filter. Finally, a UWB BPF with wide upper-stopband and sharp upper rejection skirt has been realized and its design steps have been also presented. The measured and full-wave simulated results of the proposed filter are in good agreement. [ABSTRACT FROM AUTHOR]

Two new microstrip triple-mode resonators loaded with T-shaped open stubs using axially and centrally symmetric spiral structures, respectively, are presented. Spiraled for circuit size reduction, these two half-wavelength resonators can both generate three resonant modes over a wide frequency band by loading two T-stubs with different lengths. Due to the structural symmetry, they can be analyzed by odd- and even-mode method. To validate the design concept, two compact bandpass filters (BPFs) using these two novel resonators with center frequencies of 1.76 GHz and 2.44 GHz for the GSM1800 and WLAN/Zigbee applications, respectively, have been designed, fabricated and tested. The center frequencies and bandwidths can be tunable through the analysis of resonant frequency responses, fractional bandwidths and external quality factor versus the resonator parameters. The final measured results have achieved good consistence with the simulations of these two BPFs. [ABSTRACT FROM AUTHOR]

A novel short- and open-stub loaded spiral resonator (SOSL-SR) is presented and analysed by the odd- and evenmode method to obtain three controllable resonant modes. Therefore, a triple-mode bandpass filter (BPF) has been designed with good frequency selectivity based on the proposed SOSL-SR. Then, by dividing these three resonant modes into two passbands or stopbands, a dual-band BPF and a dual-band bandstop filter using the proposed SOSL-SR have been demonstrated. Because of the spiral structure, the sizes of these three designed microstrip filters are reduced significantly. Good agreement between simulated and measured results validates the design concept. [ABSTRACT FROM AUTHOR]

Simple current- and voltage-controlled memristive circuit macro-models using SPICE are proposed to capture the nonlinear hysteresis loop behaviors in this paper. Different current-voltage characteristics are investigated by applying sinusoidal-wave, triangular-wave and square-wave source, respectively. Furthermore, using finite-difference time-domain (FDTD) emulator incorporated with a SPICE circuit solver, the current- or voltagecontrolled memristive SPICE model is embedded into a planar microwave bandstop filter (BSF) and an ultrawideband (UWB) monopole antenna, which connects two ends of the half-wavelength open-loop resonator and two sides of the U-slot in the radiating patch, respectively. The reconfigurability of the BSF and antenna notched band can be achieved by switching the states of the memristor. [ABSTRACT FROM AUTHOR]

A novel high-selectivity bandpass filter (BPF) with multiple transmission poles (TPs) and transmission zeros (TZs) using six pairs of quarter-wavelength coupled lines has been presented. By employing two pairs of side-coupled lines and four pairs of open/shorted coupled lines, high roll-off skirt characteristic, and good stopband rejection can be achieved with five TPs and six TZs. Theoretical analysis is explained and simulated results are illustrated for this high-performance filter. Finally, a BPF example with a centre frequency of 1.9 GHz and a 3 dB fractional bandwidth of 9% is designed, fabricated, and measured. It is shown that the measured lower and upper stopband rejections are better than 38 and 16 dB, respectively. Good agreement between the simulations and measurements validates the design method. [ABSTRACT FROM AUTHOR]

A novel microstrip ultra-wideband (UWB) filter with dual notched bands is presented. By placing a simple dual-mode resonator having two symmetrical outer high-impedance lines beside the UWB filter, two controllable rejection bands are created, each of which features two resonant modes and high frequency selectivity. Defected ground structure techniques (DGS) is applied to realize wide out-of-band attenuation. To explain band-notched operating mechanism, the parametric studies and equivalent circuit of the proposed structure are presented. The experimental results agree well with the predicted results declaring the advantages of the proposed structure with high-selectivity widebandwidth notched bands and improved out-of-band rejection. [ABSTRACT FROM AUTHOR]

We theoretically investigate the anisotropic plasmonic resonances in the proposed infrared absorber, which consists of stacked graphene-black phosphorus (BP) bilayers with dual absorption peaks. By combining the advantages of graphene and BP, stacked graphene-black phosphorus bilayers exhibit high absorption rates at both peaks and strong anisotropy. The loss mechanism is revealed deeply with electric field distributions, while the near field coupling between graphene and BP is discussed detailedly. Furthermore, by altering the corresponding doping levels of graphene and BP, each of the absorption bands can be independently tuned effectively. The angular dependence for oblique incidence is illustrated by performing a series of simulations. Besides, polarization-sensitivity for stacked graphene-BP bilayers (GBPBs) is also presented. Thus, our approach provides a theoretical and systematic guide for designing a variety of multi-resonant graphene-BP-based spatial absorbers, which show potentials in the applications of sensors and reflective polarizers. [ABSTRACT FROM AUTHOR]

The problem of synthesising a sparse linear array with multiple patterns is formulated as an extended reweighted l1-norm minimisation with multiple convex constraints. Synthesis results show that the proposed method can find the common sparse element positions with optimised excitations for multiple-pattern requirements, and the mainlobe, sidelobe as well as nulling region for each pattern can be accurately controlled. [ABSTRACT FROM AUTHOR]

A compact seventh-order wideband bandpass filter (BPF) with sharp roll-off skirts using coupled lines and open stubs (OSs)/shorted stubs (SSs) is proposed. Seven transmission poles in the passband and four deep transmission zeros from 0 to 2f0 ( f0 denotes centre frequency of the passband) can be realised with the help of half-wavelength OSs and quarter-wavelength SSs. For demonstration, a wideband BPF prototype is designed, fabricated with a measured 3-dB fractional bandwidth of 78% (1.22-2.77 GHz) and transition band roll-off rates of over 175 dB/GHz. Good agreement between the simulations and measurements validates the design method. [ABSTRACT FROM AUTHOR]

In this letter, the magnetic field enhancement characteristics of the spoof surface plasmon polaritons (SSPPs) is utilized to enhance the sensing of thin ferrite film. The operating sensing frequency can be tuned by adjusting the bias static magnetic field. For demonstration, a magnetic yttrium iron garnet film (i.e., YIG) with small thickness of 2 μm over a simple SSPP-based sensing structure is designed, fabricated and measured, showing improvement of higher than 20 dB to the absorption (i.e., sensing ability). The proposed method has significant potentials in the application of plasmonic integrated devices using thin ferrite materials. [ABSTRACT FROM AUTHOR]

On the basis of thin film hybrid integrated circuit technology, a miniaturised X-band balanced microwave limiter with low insertion loss (IL), low spike and flat leakage power and short recovery time has been presented. The balanced circuit configuration improves the power capacity of the PIN diodes, provides the absorptive load for the reflected power and also effectively tackles the problem of suffering high incident power. The measured results show that the balanced microwave limiter could suffer a pulse with 150 Wpeak power and 3% duty ratio while the leakage power is <10 mW, and the small signal IL of the circuit is <1.4 dB in the frequency range from 8.8 to 9.8 GHz. [ABSTRACT FROM AUTHOR]

This paper presents an innovative technique to synthesize a virtual antenna array (VAA) that consumes less energy than conventional antenna arrays that are used in mobile communications systems. We have shown that for a specific spectral efficiency a wireless system using the proposed virtual antenna array consumes significantly less energy per bit (∼3 dB) than a wireless system using a conventional multiple-input multiple-output (MIMO) array. This means the adoption of the proposed VAA technology in smartphones, iPad, Tablets and even base-stations should significantly reduce the carbon footprint of wireless systems. The proposed VAA is realized by employing a pair of linear antenna arrays that are placed in an orthogonal configuration relative to each other. This orthogonal arrangement ensures the radiation is circularly polarized. The size of the standard radiating elements constituting the VAA were miniaturized using the topology optimization method. The design of the VAA incorporates substrate integrated waveguide (SIW) and metasurface technologies. The function of SIW in the design was twofold, namely, to reduce energy loss in the substrate on which the VAA is implemented, and secondly to mitigate unwanted electromagnetic interactions between the neighboring radiating elements and thereby enhancing isolation which otherwise would degrade the radiation characteristics of the array. Metasurface technology served to effectively increase the effective aperture of the array with no impact on the footprint of the array. The consequence of SIW and metasurface technologies was improvement in the gain and radiation efficiency of the array. The proposed four orthogonal 4-element VAA covers the entire sub-5 GHz frequency range, and it radiates bidirectional in the azimuth plane and omni-directional in the elevation plane. Moreover, it is relatively easy to design and fabricate. The proposed VAA has dimensions of 0.96λ0 × 0.96λ0 × 0.0016λ0 at mid-band frequency of 3 GHz. VAA has a measured gain of 25 dBi and radiates with 90% efficiency. The average isolation between the linear arrays constituting the virtual array is better than 27 dB.

Plasmonic skyrmions are a subject of significant interest due to their potential applications in optics, photonics, and electromagnetic wave technology. These skyrmions are created by the interference of surface plasmon polaritons or spoof localized surface plasmons (SLSP), offering new possibilities for controlling light–matter interactions and structuring light. In this study, we have demonstrated the generation of both electric and magnetic skyrmions simultaneously using a rotational symmetric SLSP spiral meta-structure lattice, operating across a broad range from microwave to terahertz frequencies. By implementing them into a resonance configuration of the quasi-bound state in the continuum through symmetry breaking, we enhance the Q factor and fields, resulting in highly sensitive sensing performance. The SLSP metasurface enables tunable plasmonic skyrmions controlled by the incident polarization. Our findings have potential applications in highly sensitive sensing, filtering, modulation, and communication.

The pattern reconfigurable antenna provides a new implementation scheme for expanding application in modern wireless communications. In this paper, a pattern-reversal wideband microstrip antenna is proposed. This antenna is composed of a radiation patch with attached rectangular metal rings connected by a microstrip line on the upper layer and a four-defects ground plane connecting two PINdiodes- loaded L-shaped stubs on the bottom layer. In view of the Yagi-antenna feature of metal rings and L-shaped stubs, the ON-OFF of diodes controls directly the radiation direction of antenna. Under the joint action of multiple resonances of rings, slots and stubs, the bandwidth of antenna is surged so as to develop evident wideband radiation. Finally, the measured impedance bandwidth of −10 dB is about 20.1% from 4.54 to 5.55 GHz. The average gain of the antenna with the size of $0.75 \lambda_{0} \times 0.75 \lambda_{0}$ reaches 4.92 dBi. With the diodes dependence, the pattern can really deflect in opposite direction. The designed antenna has much advantages, such as low cost, wider band, compact and simple structure along with explicit application scenarios.

This paper proposes a compact $4 \times 4$ filtering microstrip patch antenna array with Dolph- Chebyshev distribution implemented by multilayer structure. The proposed antenna array features good filtering performance but contains no extra filtering parts in the feeding or the radiating element. The whole antenna array consists of four $1 \times 4$ antenna subarrays, each subarray is composed of four patch antennas which are coupled-fed by a single microstrip line. Inside the desired passband, by properly choosing the coupling area along the microstrip line, the patches are induced in-phase currents therefore achieving the excellent radiation characteristics. On the other hand, the four patches can’t be properly excited outside the passband which would enable radiation suppression performance. In order to implement a $4 \times 4$ filtering microstrip patch antenna array with low sidelobe level (SLL), four subarrays are combined and fed by Dolphy-Chebyshev excitation method. Finally, the proposed antenna array is implemented, fabricated and measured. The maximum measured gain in the passband is 14.7 dBi, and the radiation suppression outside the passband is better than 25 dB.

A compact on-chip dual-band bandpass filter (BPF) at millimeter-wave frequencies is proposed in 0.15- ${\mu }\text{m}$ GaAs technology. To understand the working mechanism of the BPF, an LC equivalent circuit model is presented and analyzed for position estimation of the transmission zeros and poles. For demonstration, an on-chip BPF example is fabricated and tested, whose simulation and measurement are in good agreement. There are two frequency bands at 60.2 and 79.7 GHz with bandwidths of 9% and 6.8%, respectively. The chip, excluding the feedings, is only 0.304 mm $\times0.464$ mm.

Abstract The complete mitochondrial genome (mitogenome) of animals can provide useful information for evolutionary and phylogenetic analyses. The mitogenome of the genus Exhippolysmata (i.e., Exhippolysmata ensirostris) was sequenced and annotated for the first time, its phylogenetic relationship with selected members from the infraorder Caridea was investigated. The 16,350 bp mitogenome contains the entire set of 37 common genes. The mitogenome composition was highly A + T biased at 64.43% with positive AT skew (0.009) and negative GC skew (− 0.199). All tRNA genes in the E. ensirostris mitogenome had a typical cloverleaf secondary structure, except for trnS1 (AGN), which appeared to lack the dihydrouridine arm. The gene order in the E. ensirostris mitogenome was rearranged compared with those of ancestral decapod taxa, the gene order of trnL2-cox2 changed to cox2-trnL2. The tandem duplication-random loss model is the most likely mechanism for the observed gene rearrangement of E. ensirostris. The ML and BI phylogenetic analyses place all Caridea species into one group with strong bootstrap support. The family Lysmatidae is most closely related to Alpheidae and Palaemonidae. These results will help to better understand the gene rearrangements and evolutionary position of E. ensirostris and lay a foundation for further phylogenetic studies of Caridea.

Two different types of three pairs of coupled lines (TPCL) structures with bandpass and all-stop filtering (ASF) characteristics, respectively, are proposed and analyzed through impedance matrix deduction and input admittance calculation. Combined with the stepped-impedance stubs, high-selectivity single-ended and balanced filters using TPCL structures have been presented. Five transmission poles (TPs) within the passband and six deep transmission zeros (TZs) from 0 to $2f_{0}$ ($f_{0}$ : passband center frequency) can be realized in both of single-ended and balanced filters. For demonstration, two sharp roll-off single-ended and balanced filter prototypes with good in-band characteristics (insertion losses and return losses) and high common-mode suppression are designed, whose measured 3-dB fractional bandwidths are of 35% and 34.4% (differential mode), respectively. Good agreement between the simulations and measurements validates the design concept.

A compact 60-GHz on-chip bandpass filter (BPF) is presented using gallium arsenide (GaAs) technology. The miniaturization is achieved by the half-mode substrate-integrated waveguide (HMSIW) structure. Finally, a prototype of the BPF is fabricated and tested to validate the proposed idea, whose simulated and measured results are in good agreement. The measurements show that it has a center frequency at 58.6 GHz with a bandwidth of 17.9%, and the minimum insertion loss within the passband is 1.2 dB. The chip, excluding the feedings, is only about 0.38λg × 0.58λg, where λg is the guided wavelength at the center frequency.

A substrate integrated waveguide (SIW) based spoof surface plasmon polariton (SSPP) is proposed for the design of bandpass filter (BPF). The left and right edge cutoff frequencies of the passband can be easily adjusted by changing the parameters of SIW and ring slot embedded into the SIW. Then, four half-wavelength circular slots are added on two sides of the SSPP located at the center of the circuit to introduce a high-selectivity notch band. In order to make the notch band switchable, four full-wavelength circular slots and four PIN diodes are applied instead of the four half-wavelength circular slots. As the PIN diodes are under the ON state, the notch band will be generated within the passband of BPF. On the contrary, as the PIN diodes are under the OFF state, the notch band will disappear. To validate the design idea, two BPF examples are fabricated and measured, whose simulation and measurement results are both in reasonably good agreement.

Abstract We numerically propose a dual-band absorber in the infrared region based on periodic elliptical graphene-black phosphorus (BP) pairs. The proposed absorber exhibits near-unity anisotropic absorption for both resonances due to the combination of graphene and BP. Each of the resonances is independently tunable via adjusting the geometric parameters. Besides, doping levels of graphene and BP can also tune resonant properties effectively. By analyzing the electric field distributions, surface plasmon resonances are observed in the graphene-BP ellipses, contributing to the strong and anisotropic plasmonic response. Moreover, the robustness for incident angles and polarization sensitivity are also illustrated.

A high-selectivity low-profile filtering end-fire antenna is proposed using a bandstop filtering (BSF) element integrated into the feedline of the conventional quasi-Yagi antenna. Three transmission zeros (TZs) and six transmission poles (TPs) of the BSF element can be obtained through the odd–even mode equivalent circuit analysis and calculation. With the help of TP and TZ of the BSF element, an additional resonant mode within the operating band and additional radiation null at the upper band edge of the antenna can be obtained, respectively. Consequently, the impedance bandwidth and frequency selectivity of the proposed antenna can be improved compared with the conventional quasi-Yagi antenna. For demonstration, an antenna is fabricated whose measured results exhibit a stable end-fire gain response with two radiation nulls close to two sides of the operation band.

Previously, the alternating convex optimization (ACO) was used to reduce the number of elements in the single-pattern linear array. This work extends the ACO method to synthesize the unequally spaced sparse linear arrays with reconfigurable multiple patterns. In this extended ACO, the minimum interspacing constraint can be easily incorporated in the sparse array synthesis by performing a set of constrained alternating convex optimizations. Three examples for synthesizing sparse linear array with different multiple-pattern requirements are conducted to validate the effectiveness, robustness, and advantages of the proposed method. The synthesis results show that the proposed method can effectively reduce the number of elements in the reconfigurable multiple-pattern linear arrays with good control of the sidelobe levels and minimum interspacing. The comparisons with other methods are also given in the examples.

In this paper, a Hewlett-Packard (HP) memristor model with a new window function and its versatile characteristics are presented. SPICE behaviors of the linear and nonlinear memristor model are studied through PSpice simulation. High flexibility is demonstrated for emulating the behaviors of the practical HP memristors. Furthermore, the characteristics of the composite SPICE behaviors are both investigated when two memristors are connected in series and in parallel. The polarity of each memristor is also taken into consideration. The relationships among flux, charge, voltage, current, and memristance of the double memristor circuits are simulated and analyzed.

Abstract A new dual‐band bandpass filter (BPF) using two very simple coupled microstrip rings is proposed in this paper. The two identical 3λg/2 microstrip rings are coupled each other with λg/2 coupled length, resulting in the generation of dual frequency bands with multiple transmission zeros (TZs). Theoretical deduction is presented to verify the proposed structure. The center frequencies and bandwidths of the two passbands can be tuned by controlling the impedance parameters of the microstrip rings. For demonstration, a prototype example of this dual‐band BPF is fabricated and characterized. The measured results show that it has high selectivity and great return losses of passbands with multiple TZs at the stopband.

A corrugated disk resonator with eight grooves is proposed for wideband bandpass filter (BPF) design. Due to the spoof localized surface plasmons resonances of the corrugated metallic structure, the dipole, quadrupole, hexapole modes, and a fundamental mode excited by the introduced short-circuited via holes are employed to realize four transmission poles (TPs) in the passband. The theoretical analysis is described by the electric field and current distributions on the resonator. The resonant frequencies can be tuned easily by the parameters of the structure, which can be used to adjust the center frequency and bandwidth of the BPF freely. Furthermore, two resonators are cascaded to obtain eight TPs to improve the selectivity performance. Finally, three fabricated filters demonstrate the design method.