Search

Epsilon toxin (ETX) is an exotoxin produced by type B and D Clostridium perfringens that causes enterotoxemia or necrotic enteritis in animals such as goats, sheep, and cattle. Vaccination is a key method in preventing such diseases. In this study, we developed a new type of dissolving microneedle patch (dMN) with a nanoparticle adjuvant for enhanced immune response to deliver the rETXY196E-C protein vaccine. We chose FDA-approved poly(lactic-co-glycolic acid) (PLGA) to prepare nanospheres as the vaccine adjuvant and introduced dimethyldioctadecylammonium bromide (DDAB) to make the surface of PLGA nanoparticles (PLGA NPs) positively charged for antigen adsorption. PLGA NPs with a diameter of 100~200 nm, a surface ZETA potential of approximately +40 mV, and good safety were successfully prepared and could effectively adsorb rETXY196E-C protein. Using non-toxic and antibacterial fish gelatin as the microneedle (MN) matrix, we prepared a PLGA-DDAB dMN vaccine with good mechanical properties that successfully penetrated the skin. After immunization of subcutaneous (SC) and dMN, antibody titers of the PLGA and Al adjuvant groups were similar in both two immune ways. However, in vivo neutralization experiments showed that the dMN vaccines had a better protective effect. When challenged with 100 × LD50 GST-ETX, the survival rate of the MN group was 100%, while that of the SC Al group was 80%. However, a 100% protective effect was achieved in both immunization methods using PLGA NPs. In vitro neutralization experiments showed that the serum antibodies from the dMN and SC PLGA NPs groups both protect naive mice from 10 × LD50 GST-ETX attack after being diluted 20 times and could also protect MDCK cells from 20 × CT50 GST-ETX attack. In conclusion, the PLGA-DDAB dMN vaccine we prepared has good mechanical properties, immunogenicity, and protection, and can effectively prevent ETX poisoning. This provides a better way of delivering protein vaccines. [ABSTRACT FROM AUTHOR]

Background: As a Class A bioterrorism agent, botulinum neurotoxin serotype A (BoNT/A) carries the risk of being used by terrorists to cause mass poisoning. The microneedle (MN) patch has a great potential for application as a novel vaccine delivery method. The aim of this study is to develop a thermally stable, dissolving microneedle patch for the delivery of a recombinant protein vaccine using a recombinant C-terminal heavy chain of BoNT/A (Hc of BoNT/A, AHc) to prevent botulism. Methods: Fish gelatin, a natural non-toxic and bacteriostatic material, was selected as the microneedle matrix for the preparation of the dissolving microneedle vaccine. Subsequently, the mechanical performance, bacteriostatic properties, vaccination effect, and stability of the microneedle patches were evaluated using instruments such as the displacement-force test station and optical coherence tomography (OCT) scanner. Results: Fish gelatin matrix at high concentrations has good bacteriostatic properties, and excellent mechanical performance and vaccination effect, meeting the necessities of a vaccine. In both in vivo and in vitro neutralization experiments, MN vaccines containing different antigen doses achieved the same protective efficacy as subcutaneous vaccinations, protecting mice against 106 LD50 of BoNT/A injected intraperitoneally. Thermal stability analysis of the MN vaccines revealed that the fish gelatin matrix protected the AHc vaccine from protein denaturation even after 7 days of storage at 37 °C and enabled the vaccine patches to maintain good immunogenicity and protective efficacy even after 6 months of storage at room temperature. Conclusion: In this study, we successfully prepared a bacteriostatic MN patch using a fish gelatin matrix that not only has a good vaccination effect, but also obviates the need for a cold chain for the AHc vaccine, providing the possibility of rapid, painless, and large-scale vaccination. [ABSTRACT FROM AUTHOR]

The efficient recovery and conversion of energy in oily sludge has great prospects. In this article, the main objective is to investigate the impact of the addition of CO2 during the pyrolysis of oily sludge on energy recovery and conversion by thermogravimetric analysis (TGA) and compare the effect with the traditional pyrolysis effect from the perspective of thermal conversion behavior, products composition, and kinetics analysis. The results of the experiment showed that in the CO2 atmosphere, the main weight loss temperature of oily sludge was mainly concentrated in the range of 300–500 °C, which is lower than the reaction temperature range of traditional pyrolysis. The yields of CO and H2 in the products have been greatly improved, and the highest proportion in the gas products can reach 19.29% and 22.38%, respectively. The Ea (activation energy) values of oily sludge were determined to be in the range of 40–120 kJ·mol−1 with the conversion between 0.2 and 0.8 via DAEM, KAS, Starink, and FWO methods, respectively, in which the FWO method has shown the strongest adaptability. The results of this study provide reference values for practical engineering applications. [ABSTRACT FROM AUTHOR]

Ricin and abrin are phytotoxins that can be easily used as biowarfare and bioterrorism agents. Therefore, developing a rapid detection method for both toxins is of great significance in the field of biosecurity. In this study, a novel nanoforest silicon microstructure was prepared by the micro-electro-mechanical systems (MEMS) technique; particularly, a novel microfluidic sensor chip with a capillary self-driven function and large surface area was designed. Through binding with the double antibodies sandwich immunoassay, the proposed sensor chip is confirmed to be a candidate for sensing the aforementioned toxins. Compared with conventional immunochromatographic test strips, the proposed sensor demonstrates significantly enhanced sensitivity (≤10 pg/mL for both toxins) and high specificity against the interference derived from juice or milk, while maintaining good linearity in the range of 10–6250 pg/mL. Owing to the silicon nanoforest microstructure and improved homogeneity of the color signal, short detection time (within 15 min) is evidenced for the sensor chip, which would be helpful for the rapid tracking of ricin and abrin for the field of biosecurity. [ABSTRACT FROM AUTHOR]

A new algorithm for solving S. Geetha and K.P.K. Nair's proposed variant of the n-by-n bottleneck assignment problem is introduced. The procedure is based on the application of M.L. Balinski's signature method or dual simplex method to the assignment problem at each stage. Unlike Geetha and Nair's O(n5) algorithm, it is simpler, having a complexity of 'O m(m + n log n)' where m is the number of arcs.

Nanomaterials with intrinsic enzyme mimicking activity have achieved widespread application. However, developing novel nanomaterials with multienzyme mimicry activity remains challenging. Herein, Cu 3 (HITP) 2 (HITP = 2,3,6,7,10,11-hexaiminotriphenylene) with ascorbic acid oxidase (AAO)- and peroxidase (POD)-like activity are successfully synthesized. Cu 3 (HITP) 2 exhibits excellent AAO-like activity and can specifically catalyze the oxidation reaction of ascorbic acid (AA). Dehydroascorbic acid (DHAA) obtained from the oxidation of AA is allowed to react with nonfluorescent o-phenylenediamine (OPD) to form 3-(1,2-dihydrox-yethyl) furo[3,4-b]quinoxaline-1-one (DFQ) with strong fluorescence emission. Moreover, Cu 3 (HITP) 2 is able to catalyze the chemiluminescence (CL) reaction of ABEI-H 2 O 2 to generate a strong and glow-type emission based on its POD activity. Inspired by the multienzyme mimicry activity of Cu 3 (HITP) 2 , the simple and sensitive fluorescence and chemiluminescence sensing platforms are successfully constructed and applied for the detection of AA. The sensors show high sensitivity and excellent selectivity. We believe that this multienzyme mimicry activity nanomaterial not only can be used to construct the multiple-mode biosensing platform, but also enables the extensive applications in the fields of biomedicine, energy, and environment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Pathogenic microorganisms can impact the behavior and physiology of herbivores by direct or indirect means. This study demonstrated that yellow peach moth Conogethes punctiferalis larvae feeding on Penicillium -infected apples exhibited significantly longer body length and weight parameters compared to the control group. The sequencing of gut 16S rRNA showed a significant increase in the diversity and abundance of bacteria in the larvae feeding on Penicillium -infected apples. Additionally, transcriptomic sequencing of the larval gut indicated significant upregulation of genes related to digestion and cuticle formation after consuming Penicillium -infected apples. Furthermore, enzyme activity assays revealed notable changes in the trypsin and lipase activity. Consequently, these alterations in gut microbiota structure, diversity, and gene expression levels may underlie the observed growth and developmental variations in C. punctiferalis larvae mediated by pathogenic microorganisms. This study holds theoretical significance for a deeper understanding of the tripartite interaction among microorganisms, insects, and plants as well as for the development of novel pest control measures based on gut microbiota.

Microneedle percutaneous immunization is achieved by puncturing the stratum corneum of the skin with microneedles so that the vaccine is efficiently recognized by antigen-presenting cells to induce a specific immune response. Due to the advantages of efficient induction of immune response, low pain and easy storage, transdermal immunization by microneedles has been widely used for immunization of various vaccines in recent years. This review summarizes the materials of microneedles, application for transcutaneous immunization, as well as the challenges that need to be addressed.

The efficient recovery and conversion of energy in oily sludge has great prospects. In this article, the main objective is to investigate the impact of the addition of CO 2 during the pyrolysis of oily sludge on energy recovery and conversion by thermogravimetric analysis (TGA) and compare the effect with the traditional pyrolysis effect from the perspective of thermal conversion behavior, products composition, and kinetics analysis. The results of the experiment showed that in the CO 2 atmosphere, the main weight loss temperature of oily sludge was mainly concentrated in the range of 300-500 °C, which is lower than the reaction temperature range of traditional pyrolysis. The yields of CO and H 2 in the products have been greatly improved, and the highest proportion in the gas products can reach 19.29% and 22.38%, respectively. The E a (activation energy) values of oily sludge were determined to be in the range of 40-120 kJ·mol -1 with the conversion between 0.2 and 0.8 via DAEM, KAS, Starink, and FWO methods, respectively, in which the FWO method has shown the strongest adaptability. The results of this study provide reference values for practical engineering applications.