Search

Abstract COVID-19 caused widespread disruption to normal lives and human activities. In China, the mobility behaviour response to the COVID-19 pandemic at the intra-city and population group levels is largely unknown, mainly due to a lack of individual-level publicly available mobility data. Using 210 million geotagged posts from 10 million social media users, the study quantified the changes in stay-at-home and outings across amenities and groups in China during the pandemic. The users were compared to national census data to examine their representativeness. To validate the results externally, the geotagged data was performed post-stratified correction and further comparison with commonly used data sources. The findings reveal that (i) there was between 16.8% and 57.7% decrease in visits to places of work, retail and recreation sites, parks, transit stations, grocery stores, and pharmacies within one month of the outbreak; (ii) those who are young, have a bachelor’s degree or higher, and are unmarried experienced a greater decline in outings; (iii) people preferred to visit nearby locations, resulting in a 4.3% increase in visits to retail and recreational sites within a 3-kilometer radius of their homes. The data and findings could gain insight into the asymmetric impact of the pandemic on public infrastructure use and socio-demographic groups, helping design targeted policies to promote outdoor activities, stimulate economic recovery, and alleviate social inequality in vulnerable groups.

Timely and precise detection of emerging infections is imperative for effective outbreak management and disease control. Human mobility significantly influences the spatial transmission dynamics of infectious diseases. Spatial sampling, integrating the spatial structure of the target, holds promise as an approach for testing allocation in detecting infections, and leveraging information on individuals’ movement and contact behavior can enhance targeting precision. This study introduces a spatial sampling framework informed by spatiotemporal analysis of human mobility data, aiming to optimize the allocation of testing resources for detecting emerging infections. Mobility patterns, derived from clustering point-of-interest and travel data, are integrated into four spatial sampling approaches at the community level. We evaluate the proposed mobility-based spatial sampling by analyzing both actual and simulated outbreaks, considering scenarios of transmissibility, intervention timing, and population density in cities. Results indicate that leveraging inter-community movement data and initial case locations, the proposed Case Flow Intensity (CFI) and Case Transmission Intensity (CTI)-informed spatial sampling enhances community-level testing efficiency by reducing the number of individuals screened while maintaining a high accuracy rate in infection identification. Furthermore, the prompt application of CFI and CTI within cities is crucial for effective detection, especially in highly contagious infections within densely populated areas. With the widespread use of human mobility data for infectious disease responses, the proposed theoretical framework extends spatiotemporal data analysis of mobility patterns into spatial sampling, providing a cost-effective solution to optimize testing resource deployment for containing emerging infectious diseases.

Abstract Temperature inversion (TI) constitutes a crucial component in the physicochemical processes of the lower troposphere, but disentangling human contributions to its generation from complex environmental factors poses significant challenges. We leveraged the unique natural experiment prompted by the coronavirus disease 2019 (COVID‐19) pandemic to estimate changes in TI incidence and temperature difference (∆T) caused by the economic shutdown in the first half of 2020 across 500 major cities worldwide. We found that ∆T declined by 2.5% and TI incidence declined by 18.2% compared to 2016–2019, exhibiting spatial‐temporal heterogeneity and pronounced declines in cities with higher levels of economic development and emission reduction. Moreover, we demonstrated that fine particulate matter (PM2.5) may serve as a mediating pathway through which human activities influence air thermal properties, and climate categories modulate this mediating effect. Our analysis provides empirical evidence of human influence on the vertical thermal structure of the atmosphere.

Maize productivity in the central belt plays a significant role in the food security of China. With good adaptability and disease resistance, landrace germplasm is important for maize improvement. A total of 246 landrace accessions were collected from the maize belts in central China and genotyped with the SLAF-seq (Specific-Locus Amplified Fragment Sequencing) method, and 144,650 SNPs were obtained for each accession. The results showed that the landrace accessions could be divided into three major groups. In the cluster results, Group I included 64 accessions, which mainly belonged to the landrace of White horse teeth; Group II had 71 accessions, which mainly belonged to the lantern red landraces; the rest of the 116 accessions were clustered as Group III, including a variety of types landraces and seven indicator inbred lines. In the results of structure and multidimensional scaling, the accessions’ attribution differed with the clusters, the main reason for which is the attribution change in intermediate germplasms. Linkage disequilibrium decay distance was 0.98 kb, which was much lower than that of temperate and tropical maize inbred lines, indicated the much higher genetic diversity of landrace germplasms. The results can help us select suitable landrace germplasms and speed up the process of inbred line development and maize improvement.

Abstract Targeted public health interventions for an emerging epidemic are essential for preventing pandemics. During 2020-2022, China invested significant efforts in strict zero-COVID measures to contain outbreaks of varying scales caused by different SARS-CoV-2 variants. Based on a multi-year empirical dataset containing 131 outbreaks observed in China from April 2020 to May 2022 and simulated scenarios, we ranked the relative intervention effectiveness by their reduction in instantaneous reproduction number. We found that, overall, social distancing measures (38% reduction, 95% prediction interval 31-45%), face masks (30%, 17-42%) and close contact tracing (28%, 24-31%) were most effective. Contact tracing was crucial in containing outbreaks during the initial phases, while social distancing measures became increasingly prominent as the spread persisted. In addition, infections with higher transmissibility and a shorter latent period posed more challenges for these measures. Our findings provide quantitative evidence on the effects of public-health measures for zeroing out emerging contagions in different contexts.

Indoor PM2.5 pollution is one of the leading causes of death and disease worldwide. As monitoring indoor PM2.5 concentrations on a large scale is challenging, it is urgent to assess population-level exposure and related health risks to develop an easy-to-use and generalized model to predict indoor PM2.5 concentrations and spatiotemporal variations at the global level. Existing machine learning models of indoor PM2.5 are prone to deliver single-point predictions, and their input strategies are not widely applicable. Here, we developed a Bayesian neural network (BNN) model for predicting the distribution of daily average urban residential PM2.5 concentration based on multiple data sources available from nationwide comprehensive sensor-monitoring records in China. The BNN model showed good performance with a 10-fold cross-validation R2 of 0.70, mean-absolute-error of 9.45 μg/m3, root-mean-square error of 13.3 μg/m3, and 95 % prediction interval coverage of 85 %. To demonstrate the application process, this model was applied to predict indoor PM2.5 concentrations on a large spatiotemporal scale. Our modeled population-weighted annual indoor PM2.5 concentration for China in 2019 was 22.8 μg/m3, far exceeding the WHO standard. The validity of the model at the population level can be further bolstered, making it valuable for assessing and managing indoor air pollution-related health risks.

Abstract Linkages between climate and human activity are often calibrated at daily or monthly resolutions, which lacks the granularity to observe intraday adaptation behaviors. Ignoring this adaptation margin could mischaracterize the health consequences of future climate change. Here, we construct an hourly outdoor leisure activity database using billions of cell phone location requests in 10,499 parks in 2017 all over China to investigate the within-day outdoor activity rhythm. We find that hourly temperatures above 30 °C and 35 °C depress outdoor leisure activities by 5% (95% confidence interval, CI 3–7%) and by 13% (95% CI 10–16%) respectively. This activity-depressing effect is larger than previous daily or monthly studies due to intraday activity substitution from noon and afternoon to morning and evening. Intraday adaptation is larger for locations and dates with time flexibility, for individuals more frequently exposed to heat, and for parks situated in urban areas. Such within-day adaptation substantially reduces heat exposure, yet it also delays the active time at night by about half an hour, with potential side effect on sleep quality. Combining empirical estimates with outputs from downscaled climate models, we show that unmitigated climate change will generate sizable activity-depressing and activity-delaying effects in summer when projected on an hourly resolution. Our findings call for more attention in leveraging real-time activity data to understand intraday adaptation behaviors and their associated health consequences in climate change research.

Non-pharmaceutical interventions (NPIs) and COVID-19 vaccination have been implemented concurrently, making their relative effects difficult to measure. Here, the authors show that effects of NPIs reduced as vaccine coverage increased, but that NPIs could still be important in the context of more transmissible variants.

Abstract Electrochemical CO2 reduction reaction (CO2RR) to multi-carbon products would simultaneously reduce CO2 emission and produce high-value chemicals. Herein, we report Cu electrodes modified by metal–organic framework (MOF) exhibiting enhanced electrocatalytic performance to convert CO2 into ethylene and ethanol. The Zr-based MOF, UiO-66 would in situ transform into amorphous ZrOx nanoparticles (a-ZrOx), constructing a-ZrOx/Cu hetero-interface as a dual-site catalyst. The Faradaic efficiency of multi-carbon (C2+) products for optimal UiO-66-coated Cu (0.5-UiO/Cu) electrode reaches a high value of 74% at − 1.05 V versus RHE. The intrinsic activity for C2+ products on 0.5-UiO/Cu electrode is about two times higher than that of Cu foil. In situ surface-enhanced Raman spectra demonstrate that UiO-66-derived a-ZrOx coating can promote the stabilization of atop-bound CO* intermediates on Cu surface during CO2 electrolysis, leading to increased CO* coverage and facilitating the C–C coupling process. The present study gives new insights into tailoring the adsorption configurations of CO2RR intermediate by designing dual-site electrocatalysts with hetero-interfaces.

Scientific literature, as the major medium that carries knowledge between scientists, exhibits explosive growth in the last century. Despite the frequent use of many tangible measures, to quantify the influence of literature from different perspectives, it remains unclear how knowledge is embodied and measured among tremendous scientific productivity, as knowledge underlying scientific literature is abstract and difficult to concretize. In this regard, there has laid a vacancy in the theoretical embodiment of knowledge for their evaluation and excavation. Here, for the first time, we quantify the knowledge from the perspective of information structurization and define a new measure of knowledge quantification index (KQI) that leverages the extent of disorder difference caused by hierarchical structure in the citation network to represent knowledge production in the literature. Built upon 214 million articles, published from 1800 to 2021, KQI is demonstrated for mining influential classics and laureates that are omitted by traditional metrics, thanks to in-depth utilization of structure. Due to the additivity of entropy and the interconnectivity of the network, KQI assembles numerous scientific impact metrics into one and gains interpretability and resistance to manipulation. In addition, KQI explores a new perspective regarding knowledge measurement through entropy and structure, utilizing structure rather than semantics to avoid ambiguity and attain applicability.

Summary: Heterostructured catalysts based on Cu and oxides are promising for the efficient conversion of CO2 to multi-carbon products. In this protocol, we describe the fabrication and characterization of Cu/oxide heterostructured catalysts and the evaluation approach of electrochemical CO2 reduction reaction (CO2RR) performance in an H-type cell. We also provide the details of in situ surface-enhanced Raman measurement and theoretical calculations. The protocol can be useful for constructing self-supported electrodes and assessing the CO2RR performance of as-fabricated electrodes.For complete details on the use and execution of this protocol, please refer to Li et al. (2022). : Publisher’s note: Undertaking any experimental protocol requires adherence to local institutional guidelines for laboratory safety and ethics.

Abstract Background The effect of the COVID-19 outbreak has led policymakers around the world to attempt transmission control. However, lockdown and shutdown interventions have caused new social problems and designating policy resumption for infection control when reopening society remains a crucial issue. We investigated the effects of different resumption strategies on COVID-19 transmission using a modeling study setting. Methods We employed a susceptible-exposed-infectious-removed model to simulate COVID-19 outbreaks under five reopening strategies based on China’s business resumption progress. The effect of each strategy was evaluated using the peak values of the epidemic curves vis-à-vis confirmed active cases and cumulative cases. Two-sample t-test was performed in order to affirm that the pick values in different scenarios are different. Results We found that a hierarchy-based reopen strategy performed best when current epidemic prevention measures were maintained save for lockdown, reducing the peak number of active cases and cumulative cases by 50 and 44%, respectively. However, the modeled effect of each strategy decreased when the current intervention was lifted somewhat. Additional attention should be given to regions with significant numbers of migrants, as the potential risk of COVID-19 outbreaks amid society reopening is intrinsically high. Conclusions Business resumption strategies have the potential to eliminate COVID-19 outbreaks amid society reopening without special control measures. The proposed resumption strategies focused mainly on decreasing the number of imported exposure cases, guaranteeing medical support for epidemic control, or decreasing active cases.

Abstract A robust solid-electrolyte interphase (SEI) enabled by electrolyte additive is a promising approach to stabilize Li anode and improve Li cycling efficiency. However, the self-sacrificial nature of SEI forming additives limits their capability to stabilize Li anode for long-term cycling. Herein, we demonstrate nanocapsules made from metal–organic frameworks for sustained release of LiNO3 as surface passivation additive in commercial carbonate-based electrolyte. The nanocapsules can offer over 10 times more LiNO3 than the solubility of LiNO3. Continuous supply of LiNO3 by nanocapsules forms a nitride-rich SEI layer on Li anode and persistently remedies SEI during prolonged cycling. As a result, lifespan of thin Li anode in 50 μm, which experiences drastic volume change and repeated SEI formation during cycling, has been notably improved. By pairing with an industry-level thick LiCoO2 cathode, practical Li-metal full cell demonstrates a remarkable capacity retention of 90% after 240 cycles, in contrast to fast capacity drop after 60 cycles in LiNO3 saturated electrolyte.

COVID-19, as a global health crisis, has triggered the fear emotion with unprecedented intensity. Besides the fear of getting infected, the outbreak of COVID-19 also created significant disruptions in people's daily life and thus evoked intensive psychological responses indirect to COVID-19 infections. In this study, we construct a panel expressed fear database tracking the universe of social media posts (16 million) generated by 536 thousand individuals between January 1st, 2019 and August 31st, 2020 in China. We employ deep learning techniques to detect expressions of fear emotion within each post, and then apply topic model to extract the major topics of fear expressions in our sample during the COVID-19 pandemic. Our unique database includes a comprehensive list of topics, not being limited to post centering around COVID-19. Based on this database, we find that sleep disorders ("nightmare" and "insomnia") take up the largest share of fear-labeled posts in the pre-pandemic period (January 2019-December 2019), and significantly increase during the COVID-19. We identify health and work-related concerns are the two major sources of non-COVID fear during the pandemic period. We also detect gender differences, with females having higher fear towards health topics and males towards monetary concerns. Our research shows how applying fear detection and topic modeling techniques on posts unrelated to COVID-19 can provide additional policy value in discerning broader societal concerns during this COVID-19 crisis.

The rapid development of modern science nowadays makes it rather challenging to pick out valuable ideas from massive scientific literature. Existing widely-adopted citation-based metrics are not adequate for measuring how well the idea presented by a single publication is developed and whether it is worth following. Here, inspired by traditional X-ray imaging, which returns internal structure imaging of real objects along with corresponding structure analysis, we propose Scientific X-ray, a framework that quantifies the development degree and development potential for any scientific idea through an assembly of 'X-ray' scanning, visualization and parsing operated on the citation network associated with a target publication. We pick all 71,431 scientific articles of citation counts over 1,000 as high-impact target publications among totally 204,664,199 publications that cover 16 disciplines spanning from 1800 to 2021. Our proposed Scientific X-ray reproduces how an idea evolves from the very original target publication all the way to the up to date status via an extracted 'idea tree' that attempts to preserve the most representative idea flow structure underneath each citation network. Interestingly, we observe that while the citation counts of publications may increase unlimitedly, the maximum valid idea inheritance of those target publications, i.e., the valid depth of the idea tree, cannot exceed a limit of six hops, and the idea evolution structure of any arbitrary publication unexceptionally falls into six fixed patterns. Combined with a development potential index that we further design based on the extracted idea tree, Scientific X-ray can vividly tell how further a given idea presented by a given publication can still go from any well-established starting point. Scientific X-ray successfully identifies 40 out of 49 topics of Nobel prize as high-potential topics by their prize-winning papers in an average of nine years before the prizes are released. Various trials on articles of diverse topics also confirm the power of Scientific X-ray in digging out influential/promising ideas. Scientific X-ray is user-friendly to researchers with any level of expertise, thus providing important basis for grasping research trends, helping scientific policy-making and even promoting social development.

Remote Sensing (RS) has been used in urban mapping for a long time; however, the complexity and diversity of urban functional patterns are difficult to be captured by RS only. Emerging Geospatial Big Data (GBD) are considered as the supplement to RS data, and help to contribute to our understanding of urban lands from physical aspects (i.e., urban land cover) to socioeconomic aspects (i.e., urban land use). Integrating RS and GBD could be an effective way to combine physical and socioeconomic aspects with great potential for high-quality urban land use classification. In this study, we reviewed the existing literature and focused on the state-of-the-art and perspective of the urban land use categorization by integrating RS and GBD. Specifically, the commonly used RS features (e.g., spectral, textural, temporal, and spatial features) and GBD features (e.g., spatial, temporal, semantic, and sequence features) were identified and analyzed in urban land use classification. The integration strategies for RS and GBD features were categorized into feature-level integration (FI) and decision-level integration (DI). To be more specific, the FI method integrates the RS and GBD features and classifies urban land use types using the integrated feature sets; the DI method processes RS and GBD independently and then merges the classification results based on decision rules. We also discussed other critical issues, including analysis unit setting, parcel segmentation, parcel labeling of land use types, and data integration. Our findings provide a retrospect of different features from RS and GBD, strategies of RS and GBD integration, and their pros and cons, which could help to define the framework for future urban land use mapping and better support urban planning, urban environment assessment, urban disaster monitoring and urban traffic analysis.

The rising demand for calories and protein together with urbanization, pose significant challenges to China’s food security. The determination of policy actions requires accurate estimates of climatic impacts on both crop yields (intensive margin) and cropland area (extensive margin). However, the analysis of the latter has been limited, especially in developing countries. Here, we assess the impact of temperature on land use in China by matching high-resolution satellite data on land use with daily weather data from 1980 to 2010. We find that extremely hot weather (daily average temperature above 30 °C) has a long-lasting effect on reducing cropland in China. Combining climate projections from 39 downscaled climate models, we predict that climate change is likely to reduce China’s cropland area by 2.09%–25.51% under IPCC’s slowest and fastest-warming scenarios by the end of this century. In addition, we find that non-irrigated land is more susceptible to rising temperatures in the short term; however, irrigated land is subject to a similar impact in the long term. This result suggests that the adaptive effect of irrigation could be limited under persistent rising in temperature.

Validation of satellite-based soil moisture products is necessary to provide users with an assessment of their accuracy and reliability and to ensure quality of information. A key step in the validation process is to upscale point-scale, ground-based soil moisture observations to satellite-scale pixel averages. When soil moisture shows high spatial heterogeneity within pixels, a strategy which captures the spatial characteristics is essential for the upscaling process. In addition, temporal variation in soil moisture must be taken into account when measurement times of ground-based and satellite-based observations are not the same. We applied spatio-temporal regression block kriging (STRBK) to upscale in situ soil moisture observations collected as time series at multiple locations to pixel averages. STRBK incorporates auxiliary information such as maps of vegetation and land surface temperature to improve predictions and exploits the spatio-temporal correlation structure of the point-scale soil moisture observations. In addition, STRBK also quantifies the uncertainty associated with the upscaled soil moisture which allows bias detection and significance testing of satellite-based soil moisture products. The approach is illustrated with a real-world application for upscaling in situ soil moisture observations for validating the Polarimetric L-band Multi-beam Radiometer (PLMR) retrieved soil moisture product in the Heihe Water Allied Telemetry Experimental Research experiment (HiWATER). The results show that STRBK yields upscaled soil moisture predictions that are sufficiently accurate for validation purposes. Comparison of the upscaled predictions with PLMR soil moisture observations shows that the root-mean-squared error of the PLMR soil moisture product is about 0.03 m3·m−3 and can be used as a high-resolution soil moisture product for watershed-scale soil moisture monitoring.

Sensible heat flux (H) plays an important role in characterizations of land surface water and heat balance. There are various types of H measurement methods that depend on observation scale, from local-area-scale eddy covariance (EC) to regional-scale large aperture scintillometer (LAS) and remote sensing (RS) products. However, methods of converting one H scale to another to validate RS products are still open for question. A previous area-to-area regression kriging-based scaling method performed well in converting EC-scale H to LAS-scale H. However, the method does not consider the path-weighting function in the EC- to LAS-scale kriging with the regression residue, which inevitably brought about a bias estimation. In this study, a weighted area-to-area regression kriging (WATA RK) model is proposed to convert EC-scale H to LAS-scale H. It involves path-weighting functions of EC and LAS source areas in both regression and area kriging stages. Results show that WATA RK outperforms traditional methods in most cases, improving estimation accuracy. The method is considered to provide an efficient validation of RS H flux products.

The eco-hydrological wireless sensor network (EHWSN) in the middle reaches of the Heihe River Basin in China is designed to capture the spatial and temporal variability and to estimate the ground truth for validating the remote sensing productions. However, there is no available prior information about a target variable. To meet both requirements, a hybrid model-based sampling method without any spatial autocorrelation assumptions is developed to optimize the distribution of EHWSN nodes based on geostatistics. This hybrid model incorporates two sub-criteria: one for the variogram modeling to represent the variability, another for improving the spatial prediction to evaluate remote sensing productions. The reasonability of the optimized EHWSN is validated from representativeness, the variogram modeling and the spatial accuracy through using 15 types of simulation fields generated with the unconditional geostatistical stochastic simulation. The sampling design shows good representativeness; variograms estimated by samples have less than 3% mean error relative to true variograms. Then, fields at multiple scales are predicted. As the scale increases, estimated fields have higher similarities to simulation fields at block sizes exceeding 240 m. The validations prove that this hybrid sampling method is effective for both objectives when we do not know the characteristics of an optimized variables.

The relationship between urban human dynamics and land use types has always been an important issue in the study of urban problems in China. This paper used location data from Sina Location Microblog (commonly known as Weibo) users to study the human dynamics of the spatial-temporal characteristics of gender differences in Beijing’s Olympic Village in June 2014. We applied mathematical statistics and Local Moran’s I to analyze the spatial-temporal distribution of Sina Microblog users in 100 m × 100 m grids and land use patterns. The female users outnumbered male users, and the sex ratio ( S R varied under different land use types at different times. Female users outnumbered male users regarding residential land and public green land, but male users outnumbered female users regarding workplace, especially on weekends, as the S R on weekends ( S R was 120.5) was greater than that on weekdays ( S R was 118.8). After a Local Moran’s I analysis, we found that High–High grids are primarily distributed across education and scientific research land and residential land; these grids and their surrounding grids have more female users than male users. Low–Low grids are mainly distributed across sports centers and workplaces on weekdays; these grids and their surrounding grids have fewer female users than male users. The average number of users on Saturday was the highest value and, on weekends, the number of female and male users both increased in commercial land, but male users were more active than female users ( S R was 110).

Spatial downscaling of remotely sensed products is one of the main ways to obtain earth observations at fine resolution. Area-to-point (ATP) geostatistical techniques, in which regular fine grids of remote sensing products are regarded as points, have been applied widely for spatial downscaling. In spatial downscaling, it is common to use auxiliary information to explain some of the unknown spatial variation of the target geographic variable. Because of the ubiquitously spatial heterogeneities, the observed variables always exhibit uncontrolled variance. To overcome problems caused by local heterogeneity that cannot meet the stationarity requirement in ATP regression kriging, this paper proposes a hybrid spatial statistical method which incorporates geographically weighted regression and ATP kriging for spatial downscaling. The proposed geographically weighted ATP regression kriging (GWATPRK) combines fine spatial resolution auxiliary information and allows for non-stationarity in a downscaling model. The approach was verified using eight groups of four different 25 km-resolution surface soil moisture (SSM) remote sensing products to obtain 1 km SSM predictions in two experimental regions, in conjunction with the implementation of three benchmark methods. Analyses and comparisons of the different downscaled results showed GWATPRK obtained downscaled fine spatial resolution images with greater quality and an average loss with a root mean square error value of 17.5%. The analysis indicated the proposed method has high potential for spatial downscaling in remote sensing applications.

Land use is of great importance for urban planning, environmental monitoring, and transportation management. Several methods have been proposed to obtain land use maps of urban areas, and these can be classified into two categories: remote sensing methods and social sensing methods. However, remote sensing and social sensing approaches have specific disadvantages regarding the description of social and physical features, respectively. Therefore, an appropriate fusion strategy is vital for large-area land use mapping. To address this issue, we propose an efficient land use mapping method that combines remote sensing imagery (RSI) and mobile phone positioning data (MPPD) for large areas. We implemented this method in two steps. First, a support vector machine was adopted to classify the RSI and MPPD. Then, the two classification results were fused using a decision fusion strategy to generate the land use map. The proposed method was applied to a case study of the central area of Beijing. The experimental results show that the proposed method improved classification accuracy compared with that achieved using MPPD alone, validating the efficacy of this new approach for identifying land use. Based on the land use map and MPPD data, activity density in key zones during daytime and nighttime was analyzed to illustrate the volume and variation of people working and living across different regions.

As the COVID-19 pandemic comes to an end, governments find themselves facing a new challenge: motivating citizens to resume economic activity. What is an effective way to do so? We investigate this question using a field experiment in the city of Zhengzhou, China, immediately following the end of the city's COVID-19 lockdown. We assessed the effect of a descriptive norms intervention providing information about the proportion of participants' neighbors who have resumed economic activity. We find that informing individuals about their neighbors' plans to visit restaurants increases the fraction of participants visiting restaurants by 12 percentage points (37%), among those participants who underestimated the proportion of neighbors who resumed economic activity. Those who overestimated did not respond by reducing restaurant attendance (the intervention yielded no "boomerang" effect); thus, our descriptive norms intervention yielded a net positive effect. We explore the moderating role of risk preferences and the effect of the intervention on subjects' perceived risk of going to restaurants, as well as the contrast with an intervention for parks, which were already perceived as safe. All of these analyses suggest our intervention worked by reducing the perceived risk of going to restaurants. [ABSTRACT FROM AUTHOR]

China is known in the post-cold war era for its rapid urban regeneration. Urban villages that emit negative social externalities are a unique and salient disamenity, and are central to the urban regeneration policy and planning. This paper uses micro-geographical data to explore how the extent and configuration of recently renewed urban villages in Beijing have influenced nearby housing values. Compared with locations having similar demographic characteristics, locations near urban village renewal sites experienced increases in housing values. Additional results quantify evidence in support of the heterogeneous effects from urban village renewals in affected areas versus unaffected areas. [ABSTRACT FROM AUTHOR]

Leaf area index (LAI) is a key parameter used to describe vegetation structures and is widely used in ecosystem biophysical process and vegetation productivity models. Many algorithms have been developed for the estimation of LAI based on remote sensing images. Our goal was to produce accurate and timely predictions of grassland LAI for the meadow steppes of northern China. Here, we compare the predictive power of regression approaches and hybrid geostatistical methods using Chinese Huanjing (HJ) satellite charge coupled device (CCD) data. The regression methods evaluated include partial least squares regression (PLSR), artificial neural networks (ANNs) and random forests (RFs). The two hybrid geostatistical methods were regression kriging (RK) and random forests residuals kriging (RFRK). The predictions were validated for different grassland types and different growing stages, and their performances were also examined by adding several groups of vegetation indices (VIs). The two hybrid geostatistical models (RK and RFRK) yielded the most accurate predictions (root mean squared error (RMSE) = 0.21 m2/m2 and 0.23 m2/m2 for RK and RFRK, respectively), followed by the RF model (RMSE = 0.27 m2/m2), which was the most accurate among the regression models. These three models also exhibited the best temporal performance across the duration of the growing season. The PLSR and ANN models were less accurate (RMSE = 0.33 m2/m2 and 0.35 m2/m2 for ANN and PLSR, respectively), and the PLSR model performed the worst (exhibiting varied temporal performance and unreliable prediction accuracy that was susceptible to ground conditions). By adding VIs to the predictor variables, the predictions of the PLSR and ANN models were obviously improved (RMSE improved from 0.35 m2/m2 to 0.28 m2/m2 for PLSR and from 0.33 m2/m2 to 0.28 m2/m2 for ANN); the RF and RFRK models did not generate more accurate predictions and the performance of the RK model declined (RMSE decreased from 0.21 m2/m2 to 0.32 m2/m2). [ABSTRACT FROM AUTHOR]

This paper introduces a weighted total least squares (WTLS)-based estimator into image registration to deal with the coordinates of control points (CPs) that are of unequal accuracy. The performance of the estimator is investigated by means of simulation experiments using different coordinate errors. Comparisons with ordinary least squares (LS), total LS (TLS), scaled TLS, and weighted LS estimators are made. A novel adaptive weight determination scheme is applied to experiments with remotely sensed images. These illustrate the practicability and effectiveness of the proposed registration method by collecting CPs with different-sized errors from multiple reference images with different spatial resolutions. This paper concludes that the WTLS-based iteratively reweighted TLS method achieves a more robust estimation of model parameters and higher registration accuracy if heteroscedastic errors occur in both the coordinates of reference CPs and target CPs. [ABSTRACT FROM PUBLISHER]