Search

In the quest for thinner and more efficient ferroelectric devices, Hf 0.5 Zr 0.5 O 2 (HZO) has emerged as a potential ultrathin and lead-free ferroelectric material. Indeed, when deposited on a TiN electrode, 1-25 nm thick HZO exhibits excellent ferroelectricity capability, allowing the prospective miniaturization of capacitors and transistor devices. To investigate the origin of ferroelectricity in HZO thin films, we conducted a far-infrared (FIR) spectroscopic study on 5 HZO films with thicknesses ranging from 10 to 52 nm, both within and out of the ferroelectric thickness range where ferroelectric properties are observed. Based on X-ray diffraction, these HZO films are estimated to contain various proportions of monoclinic (m-), tetragonal (t-), and polar orthorhombic (polar o-) phases, while only the 11, 17, and 21 nm thick are expected to include a higher amount of polar o-phase. We coupled the HZO infrared measurements with DFT simulations for these m-, t-, and polar o-crystallographic structures. The approach used was based on the supercell method, which combines all possible Hf/Zr mixed atomic sites in the solid solution. The excellent agreement between measured and simulated spectra allows assigning most bands and provides infrared signatures for the various HZO structures, including the polar orthorhombic form. Beyond pure assignment of bands, the DFT IR spectra averaging using a mix of different compositions (e.g., 70% polar o-phase +30% m-phase) of HZO DFT crystal phases allows quantification of the percentage of different structures inside the different HZO film thicknesses. Regarding the experimental data analysis, we used the spectroscopic data to perform a Kramers-Kronig constrained variational fit to extract the optical functions of the films using a Drude-Lorentz-based model. We found that the ferroelectric films could be described using a set of about 7 oscillators, which results in static dielectric constants in good agreement with theoretical values and previously reported ones for HfO 2 -doped ferroelectric films.

Mesoporous TiO 2 films with enhanced photocatalytic activity in both UV and visible wavelength ranges were developed through a non-conventional atomic layer deposition (ALD) process at room temperature. Deposition at such a low temperature promotes the accumulation of by-products in the amorphous TiO 2 films, caused by the incomplete hydrolysis of the TiCl 4 precursor. The additional thermal annealing induces the fast recrystallisation of amorphous films, as well as an in situ acidic treatment of TiO 2 . The interplay between the deposition parameters, such as purge time, the amount of structural defects introduced and the enhancement of the photocatalytic properties from different mesoporous films clearly shows that our easily upscalable non-conventional ALD process is of great industrial interest for environmental remediation and other photocatalytic applications, such as hydrogen production., Competing Interests: There are no conflicts of interest to declare., (This journal is © The Royal Society of Chemistry.)

A wet-chemical synthesis process was designed to obtain reproducible single-phase multiferroic BiFeO 3 nanoparticles. The phase purity, single crystallinity, and size of the nanoparticles are confirmed through the analysis of X-ray diffraction patterns, Raman spectroscopy, and high resolution transmission electron microscopy experiments. Crystal nucleation happens within the amorphous-rich area in multiple seeds, leading to the formation of single crystalline nanoparticles with no preferential faceting. Crystallization mechanisms of BiFeO 3 nanoparticles were investigated following the Kissinger-Akahira-Sunose approach, indicating that two crystallization steps are responsible of the complete BiFeO 3 nanoparticle formation. The first crystallization step involves a maximum of 70% of the final crystal volume, arising from nanocrystal nucleation and growth. The second step occurs above this threshold crystal volume fraction, and it is related to the nanocrystallite coalescence process. Analysis of the thermodynamic process of the crystallization of BiFeO 3 nanoparticles following Ostwald rules suggests a relatively low energy barrier for crystal nucleation, highlighting that phase pure, single crystalline BiFeO 3 nanoparticles are obtained using the present optimized wet-chemical synthesis process, with temperatures as low as 450 °C.

The ability to generate efficient giga-terahertz coherent acoustic phonons with femtosecond laser makes acousto-optics a promising candidate for ultrafast light processing, which faces electronic device limits intrinsic to complementary metal oxide semiconductor technology. Modern acousto-optic devices, including optical mode conversion process between ordinary and extraordinary light waves (and vice versa), remain limited to the megahertz range. Here, using coherent acoustic waves generated at tens of gigahertz frequency by a femtosecond laser pulse, we reveal the mode conversion process and show its efficiency in ferroelectric materials such as BiFeO3 and LiNbO3. Further to the experimental evidence, we provide a complete theoretical support to this all-optical ultrafast mechanism mediated by acousto-optic interaction. By allowing the manipulation of light polarization with gigahertz coherent acoustic phonons, our results provide a novel route for the development of next-generation photonic-based devices and highlight new capabilities in using ferroelectrics in modern photonics.

We have uncovered a giant gyrotropic magneto-optical response for doped ferromagnetic manganite La_{2/3}Ca_{1/3}MnO_{3} around the near room-temperature paramagnetic-to-ferromagnetic transition. At odds with current wisdom, where this response is usually assumed to be fundamentally fixed by the electronic band structure, we point to the presence of small polarons as the driving force for this unexpected phenomenon. We explain the observed properties by the intricate interplay of mobility, Jahn-Teller effect, and spin-orbit coupling of small polarons. As magnetic polarons are ubiquitously inherent to many strongly correlated systems, our results provide an original, general pathway towards the generation of magnetic-responsive gigantic gyrotropic responses that may open novel avenues for magnetoelectric coupling beyond the conventional modulation of magnetization.

Ferroelectrics carry a switchable spontaneous electric polarization. This polarization is usually coupled to strain, making ferroelectrics good piezoelectrics. When coupled to magnetism, they become so-called multiferroic systems, a field that has been widely investigated since 2003. While ferroelectrics are birefringent and non-linear optically transparent materials, the coupling of polarization with optical properties has received, since 2009, renewed attention, triggered notably by low-bandgap ferroelectrics suitable for sunlight spectrum absorption and original photovoltaic effects. Consequently, power conversion efficiencies up to 8.1% were recently achieved and values of 19.5% were predicted, making photoferroelectrics promising photovoltaic alternatives. This article aims at providing an up-to-date review on this emerging and rapidly progressing field by highlighting several important issues and parameters, such as the role of domain walls, ways to tune the bandgap, consequences arising from the polarization switchability, and the role of defects and contact electrodes, as well as the downscaling effects. Beyond photovoltaicity, other polarization-related processes are also described, like light-induced deformation (photostriction) or light-assisted chemical reaction (photostriction). It is hoped that this overview will encourage further avenues to be explored and challenged and, as a byproduct, will inspire other research communities in material science, e.g., so-called hybrid halide perovskites., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In ferroelectric thin films, controlling the orientation of the polarization is a key element to controlling their physical properties. We use laboratory and synchrotron X-ray diffraction to investigate ferroelectric bicolor PbTiO3/PbZr0.2Ti0.8O3 and tricolor PbTiO3/SrTiO3/PbZr0.2Ti0.8O3 superlattices and to study the role of the SrTiO3 layers on the domain structure. In the tricolor superlattices, we demonstrate the existence of 180° ferroelectric stripe nanodomains, induced by the depolarization field produced by the SrTiO3 layers. Each ultrathin SrTiO3 layer modifies the electrostatic boundary conditions between the ferroelectric layers compared to the corresponding bicolor structures, leading to the suppression of the a/c polydomain states. Combined with the electrostatic effect, the tensile strain induced by PbZr0.2Ti0.8O3 in the PbTiO3 layers leads to polarization rotation in the system as evidenced by grazing incidence X-ray measurements. This polarization rotation is associated with the monoclinic Mc phase as revealed by the splitting of the (HHL) and (H0L) reciprocal lattice points. This work demonstrates that the tricolor paraelectric/ferroelectric superlattices constitute a tunable system to investigate the concomitant effects of strains and depolarizing fields. Our studies provide a pathway to stabilize a monoclinic symmetry in ferroelectric layers, which is of particular interest for the enhancement of the piezoelectric properties.

Ferroic materials (ferromagnetic, ferroelectric, ferroelastic) usually divide into domains with different orientations of their order parameter. Coupling between different ferroic systems creates new functionalities, for instance the electrical control of macroscopic magnetic properties including magnetization and coercive field. Here we show that ferroelastic domains can be used to control both magnetic order and magnetization direction at the nanoscale with a voltage. We use element-specific X-ray imaging to map the magnetic domains as a function of temperature and voltage in epitaxial FeRh on ferroelastic BaTiO3. Exploiting the nanoscale phase-separation of FeRh, we locally interconvert between ferromagnetic and antiferromagnetic states with a small electric field just above room temperature. Imaging and ab initio calculations show the antiferromagnetic phase of FeRh is favoured by compressive strain on c-oriented BaTiO3 domains, and the resultant magnetoelectric coupling is larger and more reversible than previously reported from macroscopic measurements. Our results emphasize the importance of nanoscale ferroic domain structure and the promise of first-order transition materials to achieve enhanced coupling in artificial multiferroics.

A literature review points out a large discrepancy in the results of the mechanical tests on dentin that can be explained by stress and strain assessment during the tests. Errors in these assessments during mechanical tests can lead to inaccurate estimation of the mechanical properties of the tested material. On top of that, using the beam theory to analyze the bending test for thick specimens will increase these experimental errors. After summarizing the results of mechanical tests on dentin in the literature, we focus on bending tests and compare the stress assessment obtained by finite element analysis (FEA) and by beam theory application. We show that the difference between the two methods can be quite large in some cases, leading us to prefer the use of FEA to assess stresses. We then propose a new method based on coupling finite element analysis and digital image correlation (DIC) to more accurately evaluate stress distributions, strain distributions and elastic modulus in the case of a three-point bending test. To illustrate and prove the feasibility of the method, it is applied on a dentinal sample so that mean elastic modulus and maximum tensile stress are obtained (11.9 GPa and 143.9 MPa). Note that the main purpose of this study is to focus on the method itself, and not to provide new mechanical values for dentin. When used in standard mechanical testing of dentin, this kind of method should help to narrow the range of obtained mechanical properties values.

Environmentally friendly ultrathin BaTiO3 capacitors can exhibit a giant stress-induced elastocaloric effect without hysteresis loss or Joule heating. By combining this novel elastocaloric effect with the intrinsic electrocaloric effect, an ideal refrigeration cycle with high performance (temperature change over 10 K with a wide working-temperature window of 60 K) at room temperature is proposed for future cooling applications., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Generation of strain using light is a key issue for future development of ultrasonic devices. Up to now, photo-induced GHz-THz acoustic phonons have been mainly explored in metals and semiconductors, and in artificial nanostructures to enhance their phononic emission. However, despite their inherent strong polarization (providing natural asymmetry) and superior piezoelectric properties, ferroelectric oxides have been only poorly regarded. Here, by using ultrafast optical pump-probe measurements, we show that photogeneration/photodetection of coherent phonons in BiFeO3 ferroelectric leads, at room temperature, to the largest intensity ratio ever reported of GHz transverse acoustic wave versus the longitudinal one. It is found that the major mechanism involved corresponds to screening of the internal electric fields by light-induced charges, which in turn induces stress by inverse piezoelectric effect. This giant opto-acoustic response opens new perspectives for the use of ferroelectric oxides in ultrahigh frequency acoustic devices and the development of new GHz-THz acoustic sources.

Recently, strain engineering has been shown to be a powerful and flexible means of tailoring the properties of ABO3 perovskite thin films. The effect of epitaxial strain on the structure of the perovskite unit cell can induce a host of interesting effects, these arising from either polar cation shifts or rotation of the oxygen octahedra, or both. In the multi-ferroic perovskite bismuth ferrite (BiFeO3-BFO), both degrees of freedom exist, and thus a complex behaviour may be expected as one plays with epitaxial strain. In this paper, we review our results on the role of strain on the ferroic transition temperatures and ferroic order parameters. We find that, while the Néel temperature is almost unchanged by strain, the ferroelectric Curie temperature strongly decreases as strain increases in both the tensile and compressive ranges. Also unexpected is the very weak influence of strain on the ferroelectric polarization value. Using effective Hamiltonian calculations, we show that these peculiar behaviours arise from the competition between antiferrodistortive and polar instabilities. Finally, we present results on the magnetic order: while the cycloidal spin modulation present in the bulk survives in weakly strained films, it is destroyed at large strain and replaced by pseudo-collinear antiferromagnetic ordering. We discuss the origin of this effect and give perspectives for devices based on strain-engineered BiFeO3.

The interplay between charge, spin, orbital and lattice degrees of freedom in transition metal oxides has motivated extensive research aiming to understand the coupling phenomena in these multifunctional materials. Among them, rare earth vanadates are Mott insulators characterized by spin and orbital orderings strongly influenced by lattice distortions. Using epitaxial strain as a means to tailor the unit cell deformation, we report here on the first thin films of PrVO3 grown on (001)-oriented SrTiO3 substrate by pulsed laser deposition. An extensive structural characterization of the PrVO3 films, combining x-ray diffraction and high-resolution transmission electron microscopy studies, reveals the presence of oriented domains and a unit cell deformation tailored by the growth conditions. We have also investigated the physical properties of the PrVO3 films. We show that, while PrVO3 exhibits an insulating character, magnetic measurements indicate low-temperature hard-ferromagnetic behavior below 80 K. We discuss these properties in view of the thin-film structure.

Multiferroics are compounds that show ferroelectricity and magnetism. BiFeO3, by far the most studied, has outstanding ferroelectric properties, a cycloidal magnetic order in the bulk, and many unexpected virtues such as conductive domain walls or a low bandgap of interest for photovoltaics. Although this flurry of properties makes BiFeO3 a paradigmatic multifunctional material, most are related to its ferroelectric character, and its other ferroic property--antiferromagnetism--has not been investigated extensively, especially in thin films. Here we bring insight into the rich spin physics of BiFeO3 in a detailed study of the static and dynamic magnetic response of strain-engineered films. Using Mössbauer and Raman spectroscopies combined with Landau-Ginzburg theory and effective Hamiltonian calculations, we show that the bulk-like cycloidal spin modulation that exists at low compressive strain is driven towards pseudo-collinear antiferromagnetism at high strain, both tensile and compressive. For moderate tensile strain we also predict and observe indications of a new cycloid. Accordingly, we find that the magnonic response is entirely modified, with low-energy magnon modes being suppressed as strain increases. Finally, we reveal that strain progressively drives the average spin angle from in-plane to out-of-plane, a property we use to tune the exchange bias and giant-magnetoresistive response of spin valves.

Epitaxial strain has recently emerged as a powerful means to engineer the properties of ferroelectric thin films, for instance to enhance the ferroelectric Curie temperature (T(C)) in BaTiO(3). However, in multiferroic BiFeO(3) thin films an unanticipated strain-driven decrease of T(C) was reported and ascribed to the peculiar competition between polar and antiferrodistortive instabilities. Here, we report a systematic characterization of the room-temperature ferroelectric and piezoelectric properties for strain levels ranging between -2.5% and +1%. We find that polarization and the piezoelectric coefficient increase by about 20% and 250%, respectively, in this strain range. These trends are well reproduced by first-principles-based techniques.

In multiferroic BiFeO(3) thin films grown on highly mismatched LaAlO(3) substrates, we reveal the coexistence of two differently distorted polymorphs that leads to striking features in the temperature dependence of the structural and multiferroic properties. Notably, the highly distorted phase quasiconcomitantly presents an abrupt structural change, transforms from a standard to a nonconventional ferroelectric, and transitions from antiferromagnetic to paramagnetic at 360±20 K. These coupled ferroic transitions just above room temperature hold promises of giant piezoelectric, magnetoelectric, and piezomagnetic responses, with potential in many applications fields., (© 2011 American Physical Society)

We report the influence of epitaxial strain on the multiferroic phase transitions of BiFeO3 films. Using advanced characterization techniques and calculations we show that while the magnetic Néel temperature hardly varies, the ferroelectric Curie temperature TC decreases dramatically with strain. This is in contrast with the behavior of standard ferroelectrics where strain enhances the polar cation shifts and thus TC. We argue that this is caused by an interplay of polar and oxygen tilting instabilities and that strain can drive both transitions close together to yield increased magnetoelectric responses.