Search

Abstract Due to its high printing resolution and ability to print multiple materials simultaneously, inkjet technology has found wide application in medicine. However, the biological safety of 3D-printed objects is not always guaranteed due to residues of uncured resins or support materials and must therefore be verified. The aim of this study was to evaluate the quality of standard assessment methods for determining the quality and properties of polyjet-printed scaffolds in terms of their dimensional accuracy, surface topography, and cytotoxic potential. Standardized 3D-printed samples were produced in two printing orientations (horizontal or vertical). Printing accuracy and surface roughness was assessed by size measurements, VR-5200 3D optical profilometer dimensional analysis, and scanning electron microscopy. Cytotoxicity tests were performed with a representative cell line (L929) in a comparative laboratory study. Individual experiments were performed with primary cells from clinically relevant tissues and with a Toxdent cytotoxicity assay. Dimensional measurements of printed discs indicated high print accuracy and reproducibility. Print accuracy was highest when specimens were printed in horizontal direction. In all cytotoxicity tests, the estimated mean cell viability was well above 70% (p

Abstract Background Development in guided tissue regeneration requires biomaterial testing. 3D cell constructs represent a new approach to bridge the gap between cell culture and animal models. Following the hypothesis that attachment behavior of cells could be observed in toroidal 3D cell constructs, the aim of this study was to evaluate 3D gingival fibroblast (GF) toroids as a simple and feasible in vitro assay to test attachment of oral fibroblasts to collagen membranes. Methods 3D ring-like structures (toroids) were formed from human GF. Hematoxylin-eosin staining was performed with formed GF toroids. Produced GF toroids were seeded onto plastic surfaces or collagen membranes. The morphology was documented at 24 h, 48 h and 72 h after seeding with light and fluorescence microscopy. Toroid vitality was assessed at same time points with a resazurin-based toxicity assay. Results GF showed normal morphology in toroid hematoxylin-eosin staining. Over 72 h, GF toroids on plastic surfaces stayed unchanged, while GF toroids on collagen membranes showed dilatation. GF toroids on plastic surfaces and collagen membranes were metabolically active over the observed period. Conclusions Depending on the surface material, 3D GF toroids show different attachment behavior. Thus, GF toroids are suitable as simple assay to study attachment behavior to various biomaterials.

Rabbit inhalation anesthesia by endotracheal intubation involves a higher risk among small animals owing to several anatomical and physiological features, which is pathognomonic to this species of lagomorphs. Rabbit-specific airway devices have been designed to prevent misguided intubation attempts. However, it is believed that expert anesthetic training could be a boon in limiting the aftermaths of this procedure. Our research is aimed to develop a novel biomimetic 3D printed rabbit airway model with representative biomechanical material behavior and radiodensity. Imaging data were collected for two sacrificed rabbit heads using micro-computed tomography (μCT) and micro-magnetic resonance imaging for the first head and cone beam computed tomography (CBCT) for the second head. Imaging-based life-size musculoskeletal airway models were printed using polyjet technology with a combination of hard and soft materials in replicates of three. The models were evaluated quantitatively for dimensional accuracy and radiodensity and qualitatively using digital microscopy and endoscopy for technical, tactic, and visual realism. The results displayed that simulation models printed with polyjet technology have an overall surface representation of 93% for μCT-based images and 97% for CBCT-based images within a range of 0.0–2.5 mm, with μCT showing a more detailed reproduction of the nasotracheal anatomy. Dimensional discrepancies can be caused due to inadequate support material removal and due to the limited reconstruction of microstructures from the imaging on the 3D printed model. The model showed a significant difference in radiodensities in hard and soft tissue regions. Endoscopic evaluation provided good visual and tactile feedback, comparable to the real animal. Overall, the model, being a practical low-cost simulator, comprehensively accelerates the learning curve of veterinary nasotracheal intubation and paves the way for 3D simulation-based image-guided interventional procedures.

Abstract Molecular clocks help organisms to adapt important physiological functions to periodically changing conditions in the environment. These include the adaption of the 24 h sleep-wake rhythm to changes of day and night. The circadian clock is known to act as a key regulator in processes of health and disease in different organs. The knowledge on the circadian clock led to the development of chronopharmacology and chronotherapy. These fields aim to investigate how efficiency of medication and therapies can be improved based on circadian clock mechanisms. In this review we aim to highlight the role of the circadian clock in oral tissues and its potential in the different fields of dentistry including oral and maxillofacial surgery, restorative dentistry, endodontics, periodontics and orthodontics to trigger the evolving field of chronodentistry.

Abstract Background To understand the responses of the dental pulp to hypoxia is of high relevance for regenerative endodontics and dental traumatology. Here, we aimed to reveal the effects of hypoxia and the hypoxia mimetic agent L-mimosine (L-MIM) on the production of sclerostin (SOST) and dickkopf-1 (DKK-1) in human dental pulp-derived cells (DPC). Methods DPC in monolayer, spheroid and tooth slice cultures were treated with L-MIM or hypoxia. Resazurin-based toxicity and MTT assays were performed to determine cell viability. mRNA and protein levels of SOST and DKK-1 were measured with quantitative reverse transcription PCR and ELISA, respectively. To validate the hypoxia-like response, SDF-1, VEGF and IL-8 were assessed. In addition Western blots for HIF-1α, HIF-2α and HIF-3α were done. Results Cells were vital upon treatment procedures and showed increased levels of HIF-1α, and HIF-2α. In monolayer cultures, mRNA levels of SOST and DKK-1 were downregulated by L-MIM and hypoxia, respectively. A significant downregulation of SOST by hypoxia was found at the protein level compared to untreated cells while the effect on DKK-1 and the impact of L-MIM on SOST and DKK-1 did not reach the level of significance at the protein level. In spheroid cultures, mRNA levels of SOST and DKK-1 were downregulated by L-MIM. A significant downregulation of DKK-1 upon hypoxia treatment was found at the protein level while the impact of hypoxia on SOST and the effect of L-MIM on SOST and DKK-1 did not reach the level of significance. SOST and DKK-1 were also produced in tooth slices, but no pronounced modulation by L-MIM or hypoxia was found. Evaluation of SDF-1, VEGF and IL-8 showed a hypoxia-like response in the culture models. Conclusions There is no pronounced influence of hypoxia and L-MIM on DPC viability, SOST and DKK-1 protein production. However, the specific response depends on the culture model and the level of evaluation (mRNA or protein). These results deepen our understanding about the role of hypoxia and the potential impacts of hypoxia-based strategies on dental pulp.

Abstract Background Angiogenin is a key molecule in the healing process which has been successfully applied in the field of regenerative medicine. The role of angiogenin in dental pulp regeneration is unclear. Here we aimed to reveal the impact of the hypoxia mimetic agent L-mimosine (L-MIM) and hypoxia on angiogenin in the dental pulp. Methods Human dental pulp-derived cells (DPC) were cultured in monolayer and spheroid cultures and treated with L-MIM or hypoxia. In addition, tooth slice organ cultures were applied to mimic the pulp-dentin complex. We measured angiogenin mRNA and protein levels using qPCR and ELISA, respectively. Inhibitor studies with echinomycin were performed to reveal the role of hypoxia-inducible factor (HIF)-1 signaling. Results Both, L-MIM and hypoxia increased the production of angiogenin at the protein level in monolayer cultures of DPC, while the increase at the mRNA level did not reach the level of significance. The increase of angiogenin in response to treatment with L-MIM or hypoxia was reduced by echinomycin. In spheroid cultures, L-MIM increased angiogenin at protein levels while the effect of hypoxia was not significant. Angiogenin was also expressed and released in tooth slice organ cultures under normoxic and hypoxic conditions and in the presence of L-MIM. Conclusions L-MIM and hypoxia modulate production of angiogenin via HIF-1 differentially and the response depends on the culture model. Given the role of angiogenin in regeneration the here presented results are of high relevance for pre-conditioning approaches for cell therapy and tissue engineering in the field of regenerative endodontics.

Background: Many medical schools train their faculty members to construct high cognitive level multiple choice questions (MCQs) that demand a great deal of analytical and critical thinking, application, and competence. The purpose of this study is to determine the cognitive levels of MCQs by using Moore’s Expanded Outcomes Framework and to understand whether the quality of MCQs has an effect on students’ assessment performance. Methods: Four trained faculty members analysed 100 randomly selected questions developed at the University Clinic of Dentistry (UCD) and 100 questions developed by the National Board of Dental Examinations (NBDE). Moore’s framework was applied to assist the review process. Results: The majority of questions was at the level of declarative knowledge followed by questions at the level of procedural knowledge. The cognitive level of UCD questions from 2002 to 2009 was significantly lower than that of NBDE questions but increased in questions written from 2010 to 2018. The improvement of quality of MCQs had no impact on assessment performance of students. Conclusion: The enhanced cognitive levels of UCD MCQs written 2010–2018 coincides with the implementation of a faculty training program for writing high-ordered MCQs. In addition, this study shows that the use of Moore’s expanded framework is on par with other known taxonomies in supporting educators in writing items and reviewing the process. Abbreviations: MCQs: Multiple Choice Questions; UCD: University Clinic of Dentistry; NBDE: National Board of Dental Examinations

Sclerostin (Sost) and dickkopf (Dkk)-1 are inhibitors of the Wnt signaling pathway that plays a role in regenerative processes. Hypoxia-based strategies are used for regenerative approaches, but the influence of hypoxia on Sost and Dkk-1 production in a pro-inflammatory environment is unclear. The aim of this study was to assess if pro-inflammatory molecules have an influence on Sost and Dkk-1 production in dental pulp cells (DPC) under normoxia and hypoxia. Human DPC were treated with interleukin (IL)-1β, tumor necrosis factor (TNF)α or transforming growth factor (TGF)β, with L-mimosine (L-MIM) or hypoxia or a combination. Sost and Dkk-1 mRNA and protein levels were measured with qPCR and western blot, respectively. TNFα, TGFβ, L-MIM, or combined treatment did not modulate Sost and Dkk-1. IL-1β downregulated Sost at the mRNA level. Hypoxia alone and together with inflammatory markers downregulated Dkk-1 at the mRNA level. Sost and Dkk-1 protein production was below the detection limit. In conclusion, there is a differential effect of hypoxia and IL-1β on the mRNA production of Sost and Dkk-1. Pro-inflammatory molecules do not further modulate the effects of L-MIM or hypoxia on Sost and Dkk-1 production in DPC.

The aim of this study was to evaluate the effect of bleaching agents containing different concentrations of hydrogen peroxide (HP) on color-change and on enamel-surface in bovine teeth. Furthermore the influence on cell viability and proliferation was investigated. Two hundred and forty teeth were randomly assigned into four groups (home bleaching ≤6%, in-office bleaching ≤6%, in-office bleaching > 6% HP, and control group). Bleaching was performed after artificial staining and the bleached index (BI) as well as the whiteness index (WID) was measured at several time points. Chemical analysis for HP concentrations and the pH of the bleaching products was done. Furthermore, enamel surfaces of randomly selected specimens were analyzed using scanning electron microscopy (SEM) and cytotoxicity of the tested bleaching products was evaluated in vitro using dental pulp cells (DPCs) and L929 cells. A statistically significant whitening effect was observed in almost all products. As expected all investigated products resulted in decreased cell viability, however, with different values of LC50 (median lethal concentration). SEM analysis showed an analog of enamel alterations with decreasing pH, increasing exposure time, and increasing HP concentration. Bleaching agents containing a low HP concentration are considered to be effective and to have less damaging effects on enamel and tested cells.

Wnt signaling is of high relevance in the development, homeostasis, and regeneration of oral tissues. Therefore, Wnt signaling is considered to be a potential target for therapeutic strategies. The action of Wnt is tightly controlled by the inhibitors sclerostin (SOST) and Dickkopf (DKK)-1. Given the impact of SOST and DKK-1 in hard tissue formation, related diseases and healing, it is of high relevance to understand their role in oral tissues. The clinical relevance of this knowledge is further underlined by systemic and local approaches which are currently in development for treating a variety of diseases such as osteoporosis and inflammatory hard tissue resorption. In this narrative review, we summarize the current knowledge and understanding on the Wnt signaling inhibitors SOST and DKK-1, and their role in physiology, pathology, and regeneration in oral tissues. We present this role from the perspective of the different specialties in dentistry, including endodontics, orthodontics, periodontics, and oral surgery.

Tissue engineering strategies using microtissues as “building blocks” have high potential in regenerative medicine. Cognition of contraction dynamics involved in the in vitro self-assembly of these microtissues can be conceived as the bedrock of an effective periodontal tissue regenerative therapy. Our study was directed at evaluating the shrinkage in the rod-shaped structure of a directed self-assembly of human gingiva-derived cells (GC) and periodontal ligament-derived cells (PDLC) and developing insights into the potential mechanisms responsible for the shrinkage. GC and PDLC were seeded in non-adherent agarose molds to form rod microtissues. Cells used for the experiments were characterized using fluorescence-activated cell sorting (FACS). To assess the viability, resazurin-based cytotoxicity assays, trypan blue dye exclusion assay, MTT and live/dead staining, and histological evaluation of rods based on hematoxylin and eosin staining were performed. Rod contraction was evaluated and measured at 0, 2, 6, and 24 h and compared to L-929 cells. The role of transforming growth factor (TGF)-β signaling, phosphoinositide 3-kinase (PI3K)/AKT, and mitogen activated protein kinase (MAPK) signaling was analyzed. Our results show that the rod microtissues were vital after 24 h. A reduction in the length of rods was seen in the 24 h period. While the recombinant TGF-β slightly reduced contraction, inhibition of TGF-β signaling did not interfere with the contraction of the rods. Interestingly, inhibition of phosphoinositide 3-kinase by LY294002 significantly delayed contraction in GC and PDLC rods. Overall, GC and PDLC have the ability to form rod microtissues which contract over time. Thus, approaches for application of these structures as “building blocks” for periodontal tissue regeneration should consider that rods have the capacity to contract substantially. Further investigation will be needed to unravel the mechanisms behind the dynamics of contraction.

This narrative review presents an overview on the currently available 3D printing technologies and their utilization in experimental, clinical and educational facets, from the perspective of different specialties of dentistry, including oral and maxillofacial surgery, orthodontics, endodontics, prosthodontics, and periodontics. It covers research and innovation, treatment modalities, education and training, employing the rapidly developing 3D printing process. Research-oriented advancement in 3D printing in dentistry is witnessed by the rising number of publications on this topic. Visualization of treatment outcomes makes it a promising clinical tool. Educational programs utilizing 3D-printed models stimulate training of dental skills in students and trainees. 3D printing has enormous potential to ameliorate oral health care in research, clinical treatment, and education in dentistry.

Biodegradable collagen scaffolds are used clinically for oral soft tissue augmentation to support wound healing. This study sought to provide a novel ex vivo model for analyzing healing kinetics and gene expression of primary human gingival fibroblasts (hGF) within collagen scaffolds. Sponge type and gel type scaffolds with and without platelet-derived growth factor-BB (PDGF) were assessed in an hGF containing matrix. Morphology was evaluated with scanning electron microscopy, and hGF metabolic activity using MTT. We quantitated the population kinetics within the scaffolds based on cell density and distance from the scaffold border of DiI-labled hGFs over a two-week observation period. Gene expression was evaluated with gene array and qPCR. The sponge type scaffolds showed a porous morphology. Absolute cell number and distance was higher in sponge type scaffolds when compared to gel type scaffolds, in particular during the first week of observation. PDGF incorporated scaffolds increased cell numbers, distance, and formazan formation in the MTT assay. Gene expression dynamics revealed the induction of key genes associated with the generation of oral tissue. DKK1, CYR61, CTGF, TGFBR1 levels were increased and integrin ITGA2 levels were decreased in the sponge type scaffolds compared to the gel type scaffold. The results suggest that this novel model of oral wound healing provides insights into population kinetics and gene expression dynamics of biodegradable scaffolds.