Search

This study explore the characteristics of heavy metal pollution, contamination levels, and potential ecological risks in riverine sediments found in both gold mining and pristine areas. Such investigations are vital for the ongoing monitoring and preservation of water bodies and overall ecosystem health. In total, 44 composite sediment samples were collected from seven pristine environments and four mining sites. These samples underwent preparation, digestion, and analysis for heavy metal content, utilizing the inductively coupled plasma emission mass spectrometer (ICP-MS). Various tools and models, including the geo-accumulation index, enrichment factor, and degree of contamination, were employed to assess the impact of pollution on the environment. Modified ecological risk index were also used to evaluate potential ecological risks. The average concentrations of heavy metals in pristine sites spanned from 0.01±0.01 (Cd) to 73,753.64 ± 388.15 mgkg−1 (Fe), while in mining sites, they ranged from 0.04±0.02 (Cd) to 56,394.25±400.66 mgkg−1 (Fe). Comparing these concentrations against the USEPA Ecological Screening Values, Mean Shales levels, and the Canadian ISQG, it became evident that Pb, Cd, Zn, Ni, Co, and Mn concentrations generally remained below the recommended guideline values in both pristine and mining areas. However, concentrations of Cr, As, Cu, and Hg exceeded the prescribed threshold limits, particularly in the mining regions. Through Principal Component Analysis (PCA) and Geometrical Analysis for Interactive Aid (GAIA) modeling, two primary sources of heavy metals were identified: anthropogenic-related and geogenic-related. GAIA and PCA together explained 78.53 % and 79.40 % of the total variability in heavy metal concentrations, respectively. Overall, the pollution and ecological risk assessment indicated low to moderate contamination levels, with a notable exception of high arsenic contamination in the Nyam river. The findings of this study hold significance for assessing sediment conditions and river quality in mining communities within Ghana and globally. They also provide empirical data to recommend measures for mitigating water contamination in such communities.

Ivermectin (IVM), a drug originally used for treating parasitic infections, is being explored for its potential applications in cancer therapy. Despite the promising anti-cancer effects of IVM, its low water solubility limits its bioavailability and, consequently, its biological efficacy as an oral formulation. To overcome this challenge, our research focused on developing IVM-loaded lipid polymer hybrid nanoparticles (LPHNPs) designed for potential pulmonary administration. IVM-loaded LPHNPs were developed using the emulsion solvent evaporation method and characterized in terms of particle size, morphology, entrapment efficiency, and release pattern. Solid phase characterization was investigated by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Using a Twin stage impinger (TSI) attached to a device, aerosolization properties of the developed LPHNPs were studied at a flow rate of 60 L/min, and IVM was determined by a validated HPLC method. IVM-loaded LPHNPs demonstrated spherical-shaped particles between 302 and 350 nm. Developed formulations showed an entrapment efficiency between 68 and 80% and a sustained 50 to 60% IVM release pattern within 96 h. Carr’s index (CI), Hausner ratio (HR), and angle of repose (θ) indicated proper flowability of the fabricated LPHNPs. The in vitro aerosolization analysis revealed fine particle fractions (FPFs) ranging from 18.53% to 24.77%. This in vitro study demonstrates the potential of IVM-loaded LPHNPs as a delivery vehicle through the pulmonary route.

Abstract Background Dewatering constitutes a major challenge to the production of microalgae, accounting for 20–30% of the product cost. This presents a setback for the applicability of microalgae in the development of several sustainable products. This study presents an investigation into the dynamic dewatering of microalgae in a combined flocculation-filtration process. The effect of process conditions on the performance of 12 flocculants and their mixtures was assessed. Results The mechanism of flocculation via the electrostatic path was dominated by charge neutralization and subsequently followed bridging in a ‘sweep flocculation’ process. Cationic polyacrylamide (CPAM) based flocculants recorded the highest biomass retention with PAM1 and PAM2 attaining 99 and 98% retention with flocculant dosages of 10 and 15 mg/L respectively. Polyvinylamine (PVAM) was also found to improve system stability across the pH range 4–10. Alum was observed to be only effective in charge neutralization, bringing the system close to its isoelectric point (IEP). Chemometric analysis using the multi-criteria decision methods, PROMETHEE and GAIA, was applied to provide a sequential performance ranking based on the net outranking flow (ф) from 207 observations. A graphical exploration of the flocculant performance pattern, grouping the observations into clusters in relation to the decision axis ( $$\pi$$ π ), which indicated the weighted resultant of most favorable performance for all criteria was explored. Conclusion CPAM based flocculants and their mixtures demonstrated superior performance due to their viscoelastic behaviour under turbulence. The use of PVAM or alum in mixtures with CPAM reduced the required doses of both flocculants, which will provide beneficial financial impact for largescale microalgae dewatering in a flocculant assisted dynamic filtration process. Chemometric analysis based on the physico-chemical properties of the system provides a time saving assessment of performance across several criteria. The study findings provide an important foundation for flocculant assisted dynamic filtration processes.

Earth‐abundant and environmentally friendly aluminosilicate minerals can be one of the promising alternatives to develop cost‐effective energy conversion and storage devices. Herein, in situ growth of transition metal nanoparticles is proposed to modify two commonly available feldspar minerals, albite and microcline, for promoting electrocatalytic oxygen evolution reaction activity via a one‐step thermal reduction strategy. Three types of transition metal nanoparticles, namely, Ni, Co, and Fe, are selected to modify the albite or microcline surfaces. As expected, these modified products deliver enhanced catalytic activities compared to the pristine minerals. Particularly, Co‐modified microcline (C‐KASO) demonstrates the best performance that even outperforms the commercial RuO2 catalyst. This design by coupling low‐cost aluminosilicate minerals with active transition metal nanoparticles offers a new insight into directly utilizing the natural abundant resources to address the current energy crisis.

A sensitive and recyclable plasmonic nickel foam sensor has been developed for surface-enhanced Raman spectroscopy (SERS). A simple electrochemical method was used to deposit flower-shaped gold nanostructures onto nickel foam substrate. The high packing of the gold nanoflowers onto the nickel foam led to a high enhancement factor (EF) of 1.6 × 1011. The new SERS sensor was utilized for the direct determination of the broad-spectrum β-lactam carbapenem antibiotic meropenem in human blood plasma down to one pM. The sensor was also used in High Performance Liquid Chromatography (HPLC)-SERS assembly to provide fingerprint identification of meropenem in human blood plasma. Moreover, the SERS measurements were reproducible in aqueous solution and human blood plasma (RSD = 5.5%) and (RSD = 2.86%), respectively at 200 µg/mL (n = 3), and successfully recycled using a simple method, and hence, used for the repeated determination of the drug by SERS. Therefore, the new sensor has a strong potential to be applied for the therapeutic drug monitoring of meropenem at points of care and intensive care units.

Microalgae are swift replicating photosynthetic microorganisms with several applications for food, chemicals, medicine and fuel. Microalgae have been identified to be suitable for biofuels production, due to their high lipid contents. Microalgae-based biofuels have the potential to meet the increasing energy demands and reduce greenhouse gas (GHG) emissions. However, the present state of technology does not economically support sustainable large-scale production. The biofuel production process comprises the upstream and downstream processing phases, with several uncertainties involved. This review examines the various production and processing stages, and considers the use of chemometric methods in identifying and understanding relationships from measured study parameters via statistical methods, across microalgae production stages. This approach enables collection of relevant information for system performance assessment. The principal benefit of such analysis is the identification of the key contributing factors, useful for decision makers to improve system design, operation and process economics. Chemometrics proffers options for time saving in data analysis, as well as efficient process optimization, which could be relevant for the continuous growth of the microalgae industry.

Physical and chemical properties of biodiesel are influenced by structural features of the fatty acids, such as chain length, degree of unsaturation and branching of the carbon chain. This study investigated if microalgal fatty acid profiles are suitable for biodiesel characterization and species selection through Preference Ranking Organisation Method for Enrichment Evaluation (PROMETHEE) and Graphical Analysis for Interactive Assistance (GAIA) analysis. Fatty acid methyl ester (FAME) profiles were used to calculate the likely key chemical and physical properties of the biodiesel [cetane number (CN), iodine value (IV), cold filter plugging point, density, kinematic viscosity, higher heating value] of nine microalgal species (this study) and twelve species from the literature, selected for their suitability for cultivation in subtropical climates. An equal-parameter weighted (PROMETHEE-GAIA) ranked Nannochloropsis oculata, Extubocellulus sp. and Biddulphia sp. highest; the only species meeting the EN14214 and ASTM D6751-02 biodiesel standards, except for the double bond limit in the EN14214. Chlorella vulgaris outranked N. oculata when the twelve microalgae were included. Culture growth phase (stationary) and, to a lesser extent, nutrient provision affected CN and IV values of N. oculata due to lower eicosapentaenoic acid (EPA) contents. Application of a polyunsaturated fatty acid (PUFA) weighting to saturation led to a lower ranking of species exceeding the double bond EN14214 thresholds. In summary, CN, IV, C18:3 and double bond limits were the strongest drivers in equal biodiesel parameter-weighted PROMETHEE analysis.

BuII. Chem. Soc. Ethiop. 6(1), 1-9 (1992).

This chapter provides an overview of the types, sources and current techniques for characterising volatile organic compounds (VOCs) in nonindustrial indoor environments. It reviews current knowledge on the levels of VOCs in indoor environments, discusses concepts for regulating indoor levels of VOCs and appraises current efforts to understand the links between VOCs and building-related health/sensory effects. It also provides an up-to-date outline of new trends in and perspectives for indoor air VOC research. [ABSTRACT FROM AUTHOR]