Search

Beryllium-10 cosmic-ray exposure (CRE) dating has revolutionized our understanding of glacier fluctuations around the globe. A key prerequisite for the successful application of this dating method is the determination of regional production rates of in situ accumulated 10 Be, usually inferred at independently dated calibration sites. Until now, no calibration site has been available for the mid-elevation mountain ranges of central Europe. We fill this gap by determining in situ 10 Be concentrations in large boulders on moraines and by applying radiocarbon and infrared-stimulated luminescence (IRSL) dating to stratigraphically younger lake sediments in the southern Black Forest, SW Germany. The dating methods yielded concordant results, and, based on age–depth modelling with 14 C ages, the age of a cryptotephra, and IRSL ages, we deduced a regional 10 Be production rate in quartz. Calibrating the Black Forest production rate (BFPR) in the Cosmic-Ray Exposure program (CREp) resulted in a spallogenic sea-level and high-latitude (SLHL) production rate of 3.64±0.11 atoms 10 Be g -1 quartz a -1 when referring to time-dependent Lal–Stone scaling, the European Reanalysis (ERA)-40 atmosphere model, and the atmospheric 10 Be-based geomagnetic database in CREp. The BFPR turned out to be ∼11 % lower than both those at the nearest calibration site in the Alps (4.10±0.10 atoms 10 Be g -1 quartz a -1 at SLHL) and the canonical global 10 Be production rate (4.11±0.19 atoms 10 Be g -1 quartz a -1 at SLHL) in CREp. A stronger weathering and snow cover bias and a higher impact of forest, soil, moss, and shrub cover at the study site likely explain this discrepancy. [ABSTRACT FROM AUTHOR]

Beryllium-10 cosmic-ray (CRE) exposure dating has revolutionised our understanding of glacier fluctuations around the globe. A key prerequisite for the successful application of this dating method is a thorough understanding of local production rates of in-situ accumulated 10Be, usually inferred from independently dated regional reference sites. For the mid-elevation (Variscan) mountain ranges of central Europe, no production rate reference site has been available so far. We fill this gap by determining in-situ 10Be concentrations in large boulders on moraines and by applying radiocarbon and luminescence dating to stratigraphically younger lake sediments in the southern Black Forest, SW Germany. The dating methods yielded concordant results and, based on age-depth modelling with 14C ages, we deduced a local 10Be production rate. The resulting Black Forest (BF) production rate is ~11 % lower than both those at the nearest reference site in the Alps and the canonical global 10Be production rate. A stronger weathering and snow cover bias and a higher impact of soil, moss and shrub cover at the stud site likely explain this discrepancy. Due to its internal robustness, we suggest applying the BF production rate in future CRE dating studies in Central Europe and for revising existing age estimates which will have crucial implications for understanding past atmospheric circulation patterns. [ABSTRACT FROM AUTHOR]

The analysis and presentation of drill cores, an essential part of geoscientific research, requires the acquisition of high-quality core photos. Typically, core photos are either taken by hand, which often results in poor and inconsistent image quality and perspective distortions, or with large, heavy, and thus inflexible as well as expensive line scan setups. We present a simple, portable "Poor Man's Line Scan" setup that turns a customary smartphone into a semi-automatic core scanner utilising its panoramic photo function while guided on a rail in order to record undistorted core photographs at high resolution. The resulting images, although affected by some minor artefacts, are clearly superior in quality and resolution to single photos taken by hand and are comparable to images taken with commercial line scan cameras. The low cost (∼ EUR 100) and high flexibility, including the potential for modifications, of our tool make it an interesting alternative to the classical line scan setup. [ABSTRACT FROM AUTHOR]

While timing and ice extent of the last glacial maximum are generally well known, the courses of earlier glaciations have remained poorly constrained, with one of the main reasons being the scarcity of sedimentary archives. This study introduces a new palaeolake record from a Mid‐Pleistocene glaciofluvial channel system in the Lower Aare Valley (Northern Switzerland). The record of Rinikerfeld comprises a >40 m long succession of Quaternary deposits that are targeted by multi‐method sedimentological analysis. Sedimentary facies together with geochemical and geotechnical parameters, pollen content, as well as luminescence ages allow the reconstruction of the establishment, evolution and infilling of the early Marine Isotope Stage 6‐aged Rinikerfeld Palaeolake. A drastic change in lake sediment composition and structure indicates cessation of the initial glacially derived input, which is explained by landscape modification and drainage rerouting during the Penultimate (Beringen) Glaciation. Geochemical and palynological data further reveal cold, initially periglacial but slightly ameliorating, climate conditions, while the lake was progressively filled up by local runoff, before being buried by periglacial colluvial diamicts, and potentially overridden by ice. It is therefore concluded that the onset of the Beringen Glaciation was an environmentally as well as geomorphically dynamic time period in the Northern Alpine Foreland. [ABSTRACT FROM AUTHOR]

Overdeepened structures occur in formerly and presently glaciated regions around the earth and are usually referred to as overdeepenings or tunnel valleys. The existence of such troughs has been known for more than a century, and they have been attributed to similar formation processes where subglacial meltwater plays a decisive role. This comparison highlights that (foreland) overdeepenings and tunnel valleys further occur in similar dimensions and share many characteristics such as gently sinuous shapes in plan view, undulating long profiles with terminal adverse slopes, and varying cross-sectional morphologies. The best explored examples of overdeepened structures are situated in and around the European Alps and in the central European lowlands. Especially in the vicinity of the Alps, some individual troughs are well explored, allowing for a reconstruction of their infill history, whereas only a few detailed studies, notably such involving long drill core records, have been presented from northern central Europe. We suggest that more such studies could significantly further our understanding of subglacial erosion processes and the regional glaciation histories and aim to promote more intense exchange and discussion between the respective scientific communities. Kurzfassung: In den ehemals und gegenwärtig vergletscherten Regionen der Erde finden sich übertiefte Beckenstrukturen, die üblicherweise als Übertiefungen oder Tunneltäler angesprochen werden. Die Existenz dieser Tröge ist seit mehr als einem Jahrhundert bekannt, und sie wurden ähnlichen Erosionsprozessen zugeschrieben, bei denen subglaziales Schmelzwasser eine entscheidende Rolle spielt. Mit diesem Vergleich möchten wir zeigen, dass (Vorland-)Übertiefungen und Tunneltäler in vergleichbaren Dimensionen auftreten, und eine Reihe weiterer gemeinsamer Merkmale aufweisen, zum Beispiel sanft gewundene Längsachsen, undulierende Profile mit Gegensteigungen am distalen Ende, und variable Formen im Querschnitt. Die bestuntersuchten Beispiele für übertiefte Becken befinden sich im europäischen Alpenraum, und in zentraleuropäischen Tiefländern. Vor allem im Alpenraum wurden einige übertiefte Strukturen detailliert untersucht, was eine Rekonstruktion ihrer Verfüllung erlaubt. Im Gegensatz dazu existieren nur wenige (bohrungsbasierte) Detailstudien im nördlichen Mitteleuropa. Wir betonen, dass solche Untersuchungen zu unserem Verständnis subglazialer Erosionsprozesse, aber auch regionaler Vergletscherungsgeschichten beitragen können, und möchten Austausch und Diskussion unter den entsprechenden wissenschaftlichen Lagern anregen. [ABSTRACT FROM AUTHOR]

Water pressures at the base of active glacial overdeepenings are known to fluctuate strongly on various time scales. Rapid peaks in basal water pressure can lead to fracturing of the glacier bed, a process that has been described at numerous sites around the world, mostly based on large hydrofracture systems. This article presents drill‐cores from the base of a >100‐m‐deep glacial overdeepening in the Lower Aare Valley in northern Switzerland that were investigated with high‐resolution imaging (including X‐ray computed tomography) as well as compositional and microstructural analyses. The drill‐cores recovered Jurassic limestones hosting palaeokarst voids infilled with blue clay. We identify this clay, based on its kaolinitic composition, as siderolithic Bolus Clay but in a rather atypical variety formed under reducing conditions. The surfaces of the palaeokarst walls show smoothly undulating as well as brecciated sections with form‐fit interlocking clasts, which are the result of an in situ brecciation process. We argue that these particular fractures are not related to (glacio‐)tectonics or frost action. Instead, we suggest an explanation by involving water‐pressure peaks that were transmitted to the void walls by the clayey karst filling, resulting in hydrofracturing. In addition to pervasive karstification and tectonic overprinting, this water pressure‐driven fracturing may have enhanced the deep incision of the overdeepening into the rheologically competent bedrock. [ABSTRACT FROM AUTHOR]

Luminescence dating has become a pillar of the understanding of Pleistocene glacial advances in the northern foreland of the Swiss Alps. However, both quartz and feldspar from the region are equally challenging as dosimeters with anomalous fading and partial bleaching being some of the obstacles to overcome for the establishment of decisive chronologies. In this study, luminescence properties of coarse- and fine-grained quartz, feldspar, and polymineral fractions of eight samples from a palaeovalley, Rinikerfeld in northern Switzerland, are systematically assessed. Standard performance tests are conducted on all four fractions. Deconvolution of luminescence signals of the quartz fractions is implemented and shows the dominance of stable fast components. Reader-specific low preheat temperatures are investigated on the infrared stimulated luminescence (IRSL) signal of feldspar. Thermal stability of this signal is found for low preheats, and thermal quenching could be excluded for higher preheats. However, anomalous fading is observed in the feldspar and polymineral IRSL signals and two correction approaches are applied. For one approach, fading corrected coarse-grained feldspar ages are consistent with those derived from quartz. In general, coarse-grained quartz and feldspar, as well as the fine-grained polymineral fraction of one sample, are in chrono-stratigraphic agreement and present negligible evidence for partial bleaching. However, ages derived from fine-grained quartz are found to underestimate those of the coarse-grained quartz fractions. Hence, the impact of alpha efficiency and water content on the dose rate and thus the ages are assessed. A finite explanation for the observed discrepancies remains lacking, but this systematic investigation of different luminescence signals allows for the establishment of a chronology for the palaeovalley fill dating back to at least Marine Isotope Stage 6 (MIS 6). [ABSTRACT FROM AUTHOR]

Pyroclastic currents are catastrophic flows of gas and particles triggered by explosive volcanic eruptions. For much of their dynamics, they behave as particulate density currents and share similarities with turbidity currents. Pyroclastic currents occasionally deposit dune bedforms with peculiar lamination patterns, from what is thought to represent the dilute low concentration and fluid‐turbulence supported end member of the pyroclastic currents. This article presents a high resolution dataset of sediment plates (lacquer peels) with several closely spaced lateral profiles representing sections through single pyroclastic bedforms from the August 2006 eruption of Tungurahua (Ecuador). Most of the sedimentary features contain backset bedding and preferential stoss‐face deposition. From the ripple scale (a few centimetres) to the largest dune bedform scale (several metres in length), similar patterns of erosive‐based backset beds are evidenced. Recurrent trains of sub‐vertical truncations on the stoss side of structures reshape and steepen the bedforms. In contrast, sporadic coarse‐grained lenses and lensoidal layers flatten bedforms by filling troughs. The coarsest (clasts up to 10 cm), least sorted and massive structures still exhibit lineation patterns that follow the general backset bedding trend. The stratal architecture exhibits strong lateral variations within tens of centimetres, with very local truncations both in flow‐perpendicular and flow‐parallel directions. This study infers that the sedimentary patterns of bedforms result from four formation mechanisms: (i) differential draping; (ii) slope‐influenced saltation; (iii) truncative bursts; and (iv) granular‐based events. Whereas most of the literature makes a straightforward link between backset bedding and Froude‐supercritical flows, this interpretation is reconsidered here. Indeed, features that would be diagnostic of subcritical dunes, antidunes and 'chute and pools' can be found on the same horizon and in a single bedform, only laterally separated by short distances (tens of centimetres). These data stress the influence of the pulsating and highly turbulent nature of the currents and the possible role of coherent flow structures such as Görtler vortices. Backset bedding is interpreted here as a consequence of a very high sedimentation environment of weak and waning currents that interact with the pre‐existing morphology. Quantification of near‐bed flow velocities is made via comparison with wind tunnel experiments. It is estimated that shear velocities of ca 0·30 m.s−1 (equivalent to pure wind velocity of 6 to 8 m.s−1 at 10 cm above the bed) could emplace the constructive bedsets, whereas the truncative phases would result from bursts with impacting wind velocities of at least 30 to 40 m.s−1. [ABSTRACT FROM AUTHOR]

Rock surface dating, a relatively new approach within luminescence dating, determines when a rock surface was last exposed to sunlight by measuring the amount of latent OSL signal accumulated after burial. However, the potential and applicability of rock surface dating in glaciofluvial settings of the Alps has seen very limited application so far (Rades et al., 2018). Therefore, different luminescence methods including rock surface dating have been applied in a unique setting at the Hartheim gravel pit in the southern Upper Rhine Graben to establish a chronological frame for distal glaciofluvial deposits. First, a detailed field study was conducted in order to gather a comprehensive understanding of the different sediment types present. Fine grain sand, cobbles, pebbles and matrix sediments embedded within large clasts were collected and analyzed using a combination of OSL and IRSL dating. Conventional OSL dating of fine sand quartz is considered as robust age control compared to the other sediment types. A substantial amount of luminescence measurement has been done on the sand lens and gravel matrix sediment collected from Hartheim. OSL ages range around from ca. 19 ka to 32 ka for the different sediment types. Feldspar IRSL has been measured using a MET-pIRIR protocol to avoid problems with fading. Furthermore, a detailed dosimetry study was conducted to measure the varying levels of radionuclide concentration within materials of different grain size, in order to obtain accurate depositional ages. Overall, the purpose of this research contributes to our existing knowledge in the field of luminescence dating by showing the potential and versatility of different luminescence methods in different sediment types and environments that provide an ideal framework for future studies in similar contexts. [ABSTRACT FROM AUTHOR]

The present‐day landscape of the northern Alpine foreland is marked by the cumulated impact of weathering during interglacial, and of erosion and deposition during glacial periods of the Quaternary. Direct traces of the earliest phases of ice advance, as well as thorough studies thereof, exist only sporadically. Here, a succession of diamictic deposits, which has been interpreted as the infill of an Early Pleistocene overdeepened basin, is investigated with a combined sedimentological‐geotechnical approach including analysis via μCT scans, and standard tests of the water uptake, consistency, and compaction properties. The diamicts are exposed along a 4.5‐m‐deep profile, and are subdivided into a yellowish‐brown lower unit with a variable, carbonaceous, silty to sandy matrix, and a reddish‐brown upper unit that is free from carbonate and appears largely homogeneous. Although the lower unit is rather loose and surficially bioturbated, it contains microstructures indicative of subglacial deformation, which are lacking in the compact and clay‐rich upper unit. The lower part is interpreted as a secondary glacial deposit (i.e. it has been affected by limited sorting in water) that was overridden and sheared by a glacier briefly after deposition, and recently bioturbated. The upper part is less sorted, more massive and compact, and thus likely of a primary glacial nature. It is further characterized by a strong pedogenetic overprint typical of prolonged warm periods. This suggests that it is separated from the overlying glacifluvial gravel, which has an equivalent petrographic composition, by a full interglacial at least. Thus, the combination of geotechnical testing and CT‐based micromorphology offers a new, practical and cost‐effective approach to the characterization of glacially derived sediments. [ABSTRACT FROM AUTHOR]