Search

Numerous combustion applications are concerned with the stabilization of diffusion flames formed by injecting gaseous fuels into a co-flowing stream containing an oxidizer. The smooth operation of these devices depends on the attachment and lift-off characteristics of the edge flame at the base of the diffusion flame. In this paper, we address fundamental issues pertinent to the structure and dynamics of edge flames, which have attributes of both premixed and diffusion flames. The adopted configuration is the mixing layer established in the wake of a splitter plate where two streams, one containing fuel and the other oxidizer, merge. The analysis employs a diffusive-thermal model which, although it excludes effects of gas expansion, systematically includes the influences of the overall flow rate, unequal strain rates in the incoming streams, stoichiometry, differential and preferential diffusion, heat loss and gas–solid thermal interaction, and their effect on the edge structure, speed, and temperature. Conditions when the edge flame is anchored to the plate, lifted-off and stabilized in the flow, or blown-off, are identified. Two stable modes of stabilization are observed for lifted flames; the edge flame either remains stationary at a specified location or undergoes spontaneous oscillations along a direction that coincides with the trailing diffusion flame. [ABSTRACT FROM AUTHOR]

The purpose of this work is to demonstrate that there are different stable configurations of lifted edge flames for the same set of parameters. It is shown that when a fuel jet is injected surrounded by oxidiser streams of equal velocity, there are configurations with symmetric and non-symmetric flame structures with respect to the symmetry line of the problem. These two kinds of solutions are both stable and the actual realisation of one or another solution depends on the initial conditions, in particular on the flame ignition parameters. It is shown that this multiple solution phenomenon takes place when the fuel Lewis number is less than unity. The influence of the Zel'dovich number and the injection flow rate is also investigated. [ABSTRACT FROM AUTHOR]

Numerous combustion applications are concerned with the stabilization of diffusion flames formed by injecting gaseous fuels into a co-flowing stream containing an oxidizer. The smooth operation of these devices depends on the attachment and lift-off characteristics of the edge flame at the base of the diffusion flame. In this paper, we address fundamental issues pertinent to the structure and dynamics of edge flames, which have attributes of both premixed and diffusion flames. The adopted configuration is the mixing layer established in the wake of a splitter plate where two streams, one containing fuel and the other oxidizer, merge. The analysis employs a diffusive-thermal model which, although it excludes effects of gas expansion, systematically includes the influences of the overall flow rate, unequal strain rates in the incoming streams, stoichiometry, differential and preferential diffusion, heat loss and gas–solid thermal interaction, and their effect on the edge structure, speed, and temperature. Conditions when the edge flame is anchored to the plate, lifted-off and stabilized in the flow, or blown-off, are identified. Two stable modes of stabilization are observed for lifted flames; the edge flame either remains stationary at a specified location or undergoes spontaneous oscillations along a direction that coincides with the trailing diffusion flame.

Edge flames are of fundamental importance to the attachment and stabilization of diffusion flames in many practical devices, and serve as transient structures for establishing combustion in locally-quenched regions of turbulent diffusion flames. In this study, we consider an edge flame sustained in the mixing layer of two streams, one containing fuel and the other oxidizer, and examine its structure and its thermal and dynamic properties over a wide range of flow conditions, using a diffusive-thermal (constant-density) model. In addition, we allow for the fuel Lewis number to vary from sub- to super-unity values, corresponding to light and moderately heavy fuels, or fuels suitably diluted by inert species, with unity oxidizer Lewis number as appropriate for combustion in air. Two regimes have been identified and examined; a thermal-interaction regime where there is appreciable heat loss from the edge flame to the splitter plate, and a freely-standing regime where the edge flame lifts off considerably and the plate plays no role on its stabilization. The objective is to correlate important edge-flame properties, including standoff distance and edge speed and temperature, with global parameters such as overall flow rate and total heat conducted from the flame to the plate, and local parameters such as local mixture fraction gradient at the edge of the flame. [ABSTRACT FROM AUTHOR]

Abstract This paper describes an analysis of the mechanisms of autoignition-controlled flame initiation and flame stabilization in a nonpremixed jet in crossflows, using simultaneous high-speed (10 kHz) tomographic particle image velocimetry, OH-PLIF and line-of-sight flame emissions. Measurements are conducted on a turbulent, transverse, reacting propane jet issued into a crossflow generated by combustion of natural gas at an equivalence ratio of 0.4 with the crossflow velocity of 10 m/s, the crossflow temperature of 1350 K and the jet momentum flux ratio of 41. While several prior studies have analyzed the lifted character of the flame in similar configurations, we show that several dynamic processes precede the leading edge of the lifted diffusion flame, including formation and evolution of "autoignition kernels", "flame kernels" and "flame fragments". "Autoignition kernels", i.e., discrete compact reaction zones with the peak hydroxyl (OH) fluorescence intensity below that of the diffusion flame, initiate preferably at bulges along the jet periphery where the strain rates and the scalar dissipation rates are lower. The autoignition kernel grows in both size and the OH-fluorescence intensity as it convects downstream. An autoignition kernel transitions into a propagating flame kernel, which quickly gets distorted and elongated in the direction of the principal expansion strain rate to form a flame fragment. Neighboring flame fragments merge with each other and with the downstream diffusion flame via edge-flame propagation. Merging of upstream flame fragments with the downstream diffusion flame results in an upstream advancement of the diffusion-flame front. The diffusion flame front is intrinsically unsteady because of the rather random formation and evolution of autoignition kernels, flame kernels and flame fragments, presumably due to the stochastic velocity, the strain rate and mixture-fraction oscillations. [ABSTRACT FROM AUTHOR]

Abstract Most studies of triple flames in counterflowing streams of fuel and oxidizer have been focused on the symmetric problem in which the stoichiometric mixture fraction is 1/2. There then exist lean and rich premixed flames of roughly equal strengths, with a diffusion flame trailing behind from the stoichiometric point at which they meet. In the majority of realistic situations, however, the stoichiometric mixture fraction departs appreciably from unity, typically being quite small. With the objective of clarifying the influences of stoichiometry, attention is focused on one of the simplest possible models, addressed here mainly by numerical integration. When the stoichiometric mixture fraction departs appreciably from 1/2, one of the premixed wings is found to be dominant to such an extent that the diffusion flame and the other premixed flame are very weak by comparison. These curved, partially premixed flames are expected to be relevant in realistic configurations. In addition, a simple kinematic balance is shown to predict the shape of the front and the propagation velocity reasonably well in the limit of low stretch and low curvature. [ABSTRACT FROM AUTHOR]

The advective heat flux, ρc p v · ∇ T , is an important quantity in edge flames because the sign of v · ∇ T characterizes relative propagation direction of the edge flame, and its magnitude gives information regarding strength of the resulting propagation or extinction front. Modern laser techniques can measure the velocity and temperature fields simultaneously within a flame, but accurate measurements of temperature simultaneous with velocity outside the high temperature region of the flame are more difficult and time-resolved measurements of velocity and temperature simultaneously for unsteady flows require complex measurement systems. In this paper, the theoretical framework to show that the flow dilatation can be used to directly estimate a scaled advective heat flux is presented. Numerical simulations of both a positive (propagating) and negative (extinguishing) edge flame were studied to assess the relationship between dilatation and advective heat flux. Experimental measurements of the two-dimensional component of dilatation in positive and negative edge flames were also made and compared to the simulations. The full advective heat flux was well represented by the dilatation in the simulations, and the experimental data demonstrates that the measured dilatation is useful for estimating advective heat flux. Flames with varying positive and negative flame speeds are examined with the technique. [ABSTRACT FROM AUTHOR]

Methane-air partially premixed flames subjected to grid-generated turbulence are stabilized in a two-slot burner with initial fuel concentration differences leading to stratification across the stoichiometric concentration. The fuel concentration gradient at the location corresponding to the flame base is measured using planar laser induced fluorescence (PLIF) of acetone in the non-reacting mixing field. Simultaneous PLIF of the OH radical and particle image velocimetry (PIV) measurements are performed to deduce the flow velocity and the flame front. These flames exhibit a convex premixed flame front and a trailing diffusion flame, with flow divergence upstream of the flame, as indicated by the instantaneous OH-PLIF, Mie scattering images, and PIV data. The mean streamwise velocity profile attains a global minimum just upstream of the flame front due to expansion of a gases caused by heat release. The flame speed measured just upstream of the flame leading edge is normalized with respect to the turbulent stoichiometric flame speed that takes into account variations in turbulent intensity and integral length scale. The turbulent edge flame speed exceeds the corresponding stoichiometric premixed flame speed and reaches a peak at a certain concentration gradient. The mean tangential strain at the flame leading edge locally peaks at the concentration gradient corresponding to the peak flame speed. The strain varies non-monotonically with the flame curvature unlike in a non-stratified curved premixed flame. The mechanism of peak flame speed is explained as the competition between availability of hot excess reactants from the premixed flame branches to the flame stretch induced due to flame curvature. The results suggest that the stabilization of lifted turbulent partially premixed flames occurs through an edge flame even at a relatively gentle concentration gradient. The strain is also evaluated along the flame front; it peaks at the flame leading edge and decreases gradually on either side of the leading edge. The present results also show qualitatively similar trends as those of laminar triple flames. [ABSTRACT FROM AUTHOR]

Abstract: Results of a detailed numerical analysis of an n-heptane/air edge flame are presented. The equations of a low-Mach number reacting flow are solved in a two-dimensional domain using detailed models for species transport and chemical reactions. The reaction mechanism involves 560 species and 2538 reversible reactions. We consider an edge flame that is established in a mixing layer with a uniform velocity field. The mixing layer spans the equivalence ratios between pure air and 3.5. The detailed model enables us to analyze the chemical structure of the n-heptane edge flame. We identify major species profiles, discuss reactions causing the heat-release, and exploit Computational Singular Perturbation (CSP) to discuss the main fuel-consumption pathways and the structure of explosive modes in the edge flame. This analysis is performed for several regions in the edge flame to discuss the different processes at work in the premixed branches and the trailing diffusion flame. We compare different cuts through the 2D edge flame to canonical 1D premixed and diffusion flames. We also analyze the accuracy of a skeletal mechanism which was previously developed using CSP from homogeneous ignition calculations of n-heptane and show that a significant reduction in size of the mechanism can be achieved without a significant decrease in accuracy of the edge flame computation. This skeletal mechanism is then used to study the effects of increasing the equivalence ratio in the partially-premixed fuel stream. [Copyright &y& Elsevier]

Abstract: This analysis addresses the propagation of spiral edge flames found in von Kármán swirling flows induced in rotating porous-disk burners. In this configuration, a porous disk is spun at a constant angular velocity in an otherwise quiescent oxidizing atmosphere. Gaseous methane is injected through the disk pores and burns in a flat diffusion flame adjacent to the disk. Among other flame patterns experimentally found, a stable, rotating spiral flame is observed for sufficiently large rotation velocities and small fuel flow rates as a result of partial extinction of the underlying diffusion flame. The tip of the spiral can undergo a steady rotation for sufficiently large rotational velocities or small fuel flow rates, whereas a meandering tip in an epicycloidal trajectory is observed for smaller rotational velocities and larger fuel flow rates. A formulation of this problem is presented in the equidiffusional and thermodiffusive limits within the framework of one-step chemistry with large activation energies. Edge-flame propagation regimes are obtained by scaling analyses of the conservation equations and exemplified by numerical simulations of straight two-dimensional edge flames near a cold porous wall, for which lateral heat losses to the disk and large strains induce extinction of the trailing diffusion flame but are relatively unimportant in the front region, consistent with the existence of the cooling tail found in the experiments. The propagation dynamics of a steadily rotating spiral edge is studied in the large-core limit, for which the characteristic Markstein length is much smaller than the distance from the center at which the spiral tip is anchored. An asymptotic description of the edge tangential structure is obtained, spiral edge shapes are calculated, and an expression is found that relates the spiral rotational velocity to the rest of the parameters. A quasiestatic stability analysis of the edge shows that the edge curvature at extinction in the tip region is responsible for the stable tip anchoring at the core radius. Finally, experimental results are analyzed, and theoretical predictions are tested. [Copyright &y& Elsevier]

Abstract: This paper overviews the dynamics of bluff body stabilized flames and describes the phenomenology of the blowoff process. The first section of the paper provides an overview of the fluid mechanics of the non-reacting and reacting bluff body wake flow. It highlights the key features of the flow (the boundary layer, separated shear layer, and wake), the flow instabilities that influence each of these features, and the influences of the flame on these instabilities. A key point from these studies is the large differences between the non-reacting wake (dominated by an absolutely unstable, sinuous instability associated with vortex shedding from the bluff body) and the reacting wake of high dilatation ratio flames. The latter are dominated by the lower intensity, convective instability of the shear layer. Very low dilatation ratio flames begin to approach the behavior of the non-reacting wake, as might be expected. Next, the paper presents a compilation of bluff body blowoff data from the literature and shows that the basic Damköhler correlations developed from prior studies are recovered, but without the need for semi-empirical fits or adjustable constants for chemical time estimation. The third section considers in detail the dynamics and phenomenology of near blowoff flames. It is shown that spatio/temporally localized extinction occurs sporadically on near blowoff flames, manifested as “holes” in the flame sheet that form and convect downstream. However, these extinction events are distinct from blowoff – in fact, under certain conditions the flame can persist indefinitely with certain levels of local extinction. The number of these events per unit time increase as blowoff is approached, eventually leading to large scale alteration of the wake. We hypothesize that simple Damköhler number correlations contain the essential physics describing the intial stage of blowoff; i.e., they are correlations for the conditions where local extinction on the flame begins, but do not fundamentally describe the ultimate blowoff condition itself. However, such correlations are reasonably successful in correlating blowoff limits because the ultimate blowoff event is related to the onset of this first stage. Key conclusions from this review are that blowoff occurs in multiple steps – local extinction along the flame sheet, large scale wake disruption, and a final blowoff whose ultimate “trigger” is associated with wake cooling and shrinking. A key challenge for future workers is understanding these latter processes that lead to ultimate blowoff of the flame. [Copyright &y& Elsevier]

Contemporary interest exists in understanding the roles of leading edge flow deflection, secondary jet instabilities and islands of ignited gases in permitting lifted flames to stabilize. To assess these issues, elements of the leading-edge of a lifted turbulent jet flame have been investigated using laser-imaging techniques. Images of flame position, morphology and dynamics are presented primarily from CH planar laser-induced fluorescence (CH-PLIF) measurements. In particular, evidence of flame islands, or flame fragments, upstream of the bulk-flame leading edge are reported and discussed. This evidence is presented in the form of sequential CH-PLIF images and well as CH-PLIF/Rayleigh scattering images. Images showing thermal characteristics of the regions surrounding the edge flame are also described. [ABSTRACT FROM AUTHOR]

Abstract: The study of edge flames has received increased attention in recent years. This work reports the results of a recent study into two-dimensional, planar, propagating edge flames that are remote from solid surfaces (called here, “free-layer” flames, as opposed to layered flames along floors or ceilings). They represent an ideal case of a flame propagating down a flammable plume, or through a flammable layer in microgravity. The results were generated using a new apparatus in which a thin stream of gaseous fuel is injected into a low-speed laminar wind tunnel thereby forming a flammable layer along the centerline. An airfoil-shaped fuel dispenser downstream of the duct inlet issues ethane from a slot in the trailing edge. The air and ethane mix due to mass diffusion while flowing up towards the duct exit, forming a flammable layer with a steep lateral fuel concentration gradient and smaller axial fuel concentration gradient. We characterized the flow and fuel concentration fields in the duct using hot wire anemometer scans, flow visualization using smoke traces, and non-reacting, numerical modeling using COSMOSFloWorks. In the experiment, a hot wire near the exit ignites the ethane–air layer, with the flame propagating downwards towards the fuel source. Reported here are tests with the air inlet velocity of 25cm/s and ethane flows of 967–1299sccm, which gave conditions ranging from lean to rich along the centerline. In these conditions the flame spreads at a constant rate faster than the laminar burning rate for a premixed ethane–air mixture. The flame spread rate increases with increasing transverse fuel gradient (obtained by increasing the fuel flow rate), but appears to reach a maximum. The flow field shows little effect due to the flame approach near the igniter, but shows significant effect, including flow reversal, well ahead of the flame as it approaches the airfoil fuel source. [Copyright &y& Elsevier]

Abstract: A numerical analysis is presented to describe the liftoff and blowoff of a diffusion flame in the mixing layer between two parallel streams of fuel (mainly methane diluted with nitrogen) and air emerging from porous walls. The analysis, which takes into account the effects of thermal expansion, assumes a one-step overall Arrhenius reaction, where the activation energy E is allowed to vary to reproduce the variations of the planar flame propagation velocity with the equivalence ratio. First, we describe the steady flame-front structure when stabilized close to the porous wall (attached flame regime). Then, we analyze the case where the flame front is located far away from the porous wall, at a distance such that, upstream of the flame front, the mixing layer has a self-similar structure (lifted flame regime). For steady lifted flames, the results, given here in the case when the fuel and air streams are injected with the same velocity, relate , the front velocity (relative to the upstream flow) measured with the planar stoichiometric flame velocity, with the Damköhler number , based on the thickness, , of the nonreacting mixing layer at the flame-front position and the laminar flame thickness, . For large values of , the results, presented here for a wide range of dilutions of the fuel stream, provide values of the front propagation velocity that are in good agreement with previous experimental results, yielding well-defined conditions for blowoff. The calculated flame-front velocity can also be used to describe the transient flame-front dynamics after ignition by an external energy source. [Copyright &y& Elsevier]