Search

This paper presents results of the experimental research aimed at fire and smoke properties of rolling stock coating system. The overriding research task was to meet current European requirements in the field of fire properties with maintaining the desired performance parameters, such as protective and decorative properties. The research determined parameters such as flame spreading over the surface and heat emission of coating system prepared on steel substrate. Research was carried out to find the optimum thickness of intumescent layer. The tests have shown the effectiveness of use of a protective paint that allows meeting the requirements in the field of fire safety. [ABSTRACT FROM AUTHOR]

The necessity of having windows on any building's façade is not questionable. However, not every window is suitable for any building. The selection of an adequate window must include the analysis of various factors—the most important ones are the type of window (e.g., single or double glazing); filling gas in cavities (e.g., air, argon or some other gas); and placing, i.e., orientation of a window on a façade (facing north, south, or east, etc.). The research presented in this paper is dealing with the calculation of the window thermal loading for the cities of Kragujevac and Bor in Serbia and Žilina in Slovakia. These three cities were selected because they belong to different climate regions, according to the Köppen–Geiger climatic classification. The first two cities in Serbia belong to the same region Cf with difference only in the category of summer—Kragujevac Cfa and Bor Cfb—while the third city—Žilina in Slovakia—belongs to the Dfb region. The calculated thermal loading through the window was obtained as a sum of the thermal loading due to the heat conduction and thermal loading due to the solar radiation. The objective was to find the optimal window construction and orientation of a building's façade for each of these cities, by varying the type of the window, its frame material and the filling gas. The results show that for the first two cities in Serbia, there is a difference in the window frame material in the optimal window construction, while for the third city (Žilina in Slovakia), the results are the same as for the second city (Bor in Serbia) despite the fact that they belong to different climate regions (Cfb and Dfb, respectively). These results support the fact that the climate affects the optimal window construction for any city/region in the world. [ABSTRACT FROM AUTHOR]

Numerous phenomena that occur during the process of machine parts' regeneration have a significant impact on the loss of their working ability. Therefore, the properties of the working surfaces of the teeth flanks of repaired gears were analyzed in this research. The hereditary properties of the gear teeth are expressed by the interdependence of their geometric and physical-mechanical-metallurgical parameters created during the technological operations of regeneration of worn teeth by welding/hard-facing. The hard-facing was executed with three filler metal types, namely: combination Inox 18/8/6 + EDur 600, Castolin 2 and UTP 670. The tested properties included geometrical accuracy, microstructure and microhardness. Evaluation of the executed regeneration procedures was done by comparing the mentioned parameters of the regenerated gears and the new ones. The tested gears were not withdrawn from production due to damage, but they were newly manufactured and intentionally damaged gears, made of the same materials, subjected to the same manufacturing process. In this way, all influences except for the considered filler metal type were eliminated. Based on results of the conducted experiments, it was possible to establish the influence of the filler metal type on the surface characteristics of the regenerated gears' teeth flanks. [ABSTRACT FROM AUTHOR]