Search

CO2 capture and conversion are a key research field for the transition towards an economy only based on renewable energy sources. In this regard, hydride materials are a potential option for CO2 methanation since they can provide hydrogen and act as a catalytic species. In this work, Mg2NiH4 complex hydride is synthesized by in situ monitoring of mechanical milling under a hydrogen atmosphere from a 2MgH2:Ni stoichiometric mixture. Temperature and pressure evolution is monitored, and the material is characterized, during milling in situ, thus providing a good insight into the synthesis process. The cubic polymorph of Mg2NiH4 (S.G. Fm3¯m) starts to be formed in the early beginning of the mechanical treatment due to the mechanical stress induced by the milling process. Then, after 25 hours of milling, Mg2NiH4 with a monoclinic (S.G. C12/c1) structure appears. The formation of the monoclinic polymorph is most likely related to the stress release that follows the continuous refinement of the material's microstructure. At the end of the milling process, after 60 hours, the as-milled material is composed of 90.8 wt% cubic Mg2NiH4, 5.7 wt% monoclinic Mg2NiH4, and 3.5 wt% remnant Ni. The as-milled Mg2NiH4 shows high reactivity for CO2 conversion into CH4. Under static conditions at 400 °C for 5 hours, the interactions between as-milled Mg2NiH4 and CO2 result in total CO2 consumption and in the formation of the catalytic system Ni–MgNi2–Mg2Ni/MgO. Experimental evidence and thermodynamic equilibrium calculations suggest that the global methanation mechanism takes place through the adsorption of C and the direct solid gasification towards CH4 formation. [ABSTRACT FROM AUTHOR]

A detailed electronic and microstructural characterization is reported for the LiBH4-MgH2 reactive hydride composite system with and without titanium isopropoxide as additive. Surface characterization by x-ray photoelectron spectroscopy combined to a morphological study by scanning electron microscopy as well as elemental map composition analysis by energy dispersive x-ray emission are presented in this paper for the first time for all sorption steps. Although sorption reactions are not complete at the surface due to the unavoidable superficial oxidation, it has been shown that the presence of the additive is favoring the heterogeneous nucleation of the MgB2 phase. Ti-based phases appear in all the samples for the three sorption steps well dispersed and uniformly distributed in the material. Li-based phases are highly dispersed at the surface while the Mg-based ones appear, either partially covered by the Li-based phases, or forming bigger grains. Ball milling is promoting mixing of phases and a good dispersion of the additive what favors grain refinement and heterogeneous reactions at the interfaces. [ABSTRACT FROM AUTHOR]

Polycrystalline (0002)-textured yttrium (Y) films of 50–500 nm thickness on sapphire substrates were loaded electrolytically with hydrogen (H). The stresses which build up in these films were measured in situ using curvature measurements. The results are compared to the behavior of bulk Y–H. A linear elastic model is used to predict the behavior of clamped thin films. Basic properties of the bulk Y–H phase diagram and elastic constants resemble the measured values of the thin films. Compressive stress builds up during H-loading in the α-Y phase and in the (α-Y+β-YH[sub 2]) two-phase field, showing an initial stress increase of -1.3 GPa per hydrogen concentration X[sub H] (compressive stress). While bulk Y–H samples are known to show a contraction in the β-YH[sub 2] phase during H loading, thin films show no evidence for such a contraction during the first loading cycle of the film. The stress remains constant in the bulk β-phase concentration range (ΔX[sub H]=0.1 H/Y). This is attributed to the narrow β-phase field (ΔX[sub H]=0.02 H/Y) of the thin film during the first loading. Only samples which have been kept at a hydrogen concentration of about 1.5 H/Y for weeks show tensile stress in the concentration range of the bulk β phase. Amazingly a stress increase of about +0.5 GPa/X[sub H] (tensile stress) is measured in the β+γ two-phase field. This is attributed to the smaller in-plane nearest-neighbor distance in the γ phase compared to the β phase. In the γ-phase field compressive stress is built up again, compensating the tensile stress. It increases by -1.3 GPa/X[sub H]. In total, the net stress in Y–H films remains comparably small. This could be a reason for the good mechanical stability of such Y–H switchable mirrors during H cycling. © 2003 American Institute of Physics. [ABSTRACT FROM AUTHOR]

The system Ca(BH4)2–Mg2NiH4 is used as a model to prove the unique possibility to fully reverse the borohydride decomposition process even in cases where the decomposition reaction leads to undesired stable boron containing species (boron sinks). The formation of MgNi2.5B2 directly from Ca(BH4)2 or from CaB12H12 and amorphous boron allows an unexpectedly easy transfer of the boron atoms to reversibly form Ca(BH4)2 during rehydrogenation. In addition, to the best of our knowledge, the mutual destabilisation of the starting reactants is observed for the first time in Ca(BH4)2 based Reactive Hydride Composite (RHC) systems. A detailed account of dehydrogenation and rehydrogenation reaction mechanisms as the function of applied experimental conditions is given. [ABSTRACT FROM AUTHOR]

Aiming to improve the hydrogen storage properties of 2LiH + MgB2 (Li-RHC), the effect of TiO2 addition to Li-RHC is investigated. The presence of TiO2 leads to the in situ formation of core–shell LixTiO2 nanoparticles during milling and upon heating. These nanoparticles markedly enhance the hydrogen storage properties of Li-RHC. Throughout hydrogenation–dehydrogenation cycling at 400 °C a 1 mol% TiO2 doped Li-RHC material shows sustainable hydrogen capacity of ∼10 wt% and short hydrogenation and dehydrogenation times of just 25 and 50 minutes, respectively. The in situ formed core–shell LixTiO2 nanoparticles confer proper microstructural refinement to the Li-RHC, thus preventing the material's agglomeration upon cycling. An analysis of the kinetic mechanisms shows that the presence of the core–shell LixTiO2 nanoparticles accelerates the one-dimensional interface-controlled mechanism during hydrogenation owing to the high Li+ mobility through the LixTiO2 lattice. Upon dehydrogenation, the in situ formed core–shell LixTiO2 nanoparticles do not modify the dehydrogenation thermodynamic properties of the Li-RHC itself. A new approach by the combination of two kinetic models evidences that the activation energy of both MgH2 decomposition and MgB2 formation is reduced. These improvements are due to a novel catalytic mechanism via Li+ source/sink reversible reactions. [ABSTRACT FROM AUTHOR]

Nanosized lithiated titanium oxide (LixTiO2) noticeably improves the kinetic behaviour of 2LiBH4 + MgH2. The presence of LixTiO2 reduces the time required for the first dehydrogenation by suppressing the intermediate reaction to Li2B12H12, leading to direct MgB2 formation. [ABSTRACT FROM AUTHOR]

The Ca(BH4)2–Mg2NiH4 system presented here is, to the best of our knowledge, the first described Ca(BH4)2-based hydride composite that reversibly transfers boron from the Ca-based compound(s) to the reaction partner. The ternary boride MgNi2.5B2 is formed upon dehydrogenation and the formation of Ca(BH4)2 upon rehydrogenation is confirmed. [ABSTRACT FROM AUTHOR]

New insights into the reaction pathways of different potassium/magnesium amide–hydride based systems are discussed. In situ SR-PXD experiments were for the first time performed in order to reveal the evolution of the phases connected with the hydrogen releasing processes. Evidence of a new K–N–H intermediate is shown and discussed with particular focus on structural modification. Based on these results, a new reaction mechanism of amide–hydride anionic exchange is proposed. [ABSTRACT FROM AUTHOR]

Abstract: In the present study, the complex alanate Na2LiAlH6 is synthesized by high-energy milling of powder blends containing NaH and LiAlH4. The related thermodynamics are determined. In addition, a comprehensive study was performed to investigate the influence of different oxide and halide catalysts on the kinetics of hydrogen absorption and desorption, as well as their general drawback to decrease storage capacity. [Copyright &y& Elsevier]

The Lithium–Boron Reactive Hydride Composite System (Li-RHC) (2 LiH + MgB 2 /2 LiBH 4 + MgH 2) is a high-temperature hydrogen storage material suitable for energy storage applications. Herein, a comprehensive gas-solid kinetic model for hydrogenation is developed. Based on thermodynamic measurements under absorption conditions, the system's enthalpy ΔH and entropy ΔS are determined to amount to −34 ± 2 kJ∙mol H 2 −1 and −70 ± 3 J∙K−1∙mol H 2 −1, respectively. Based on the thermodynamic behavior assessment, the kinetic measurements' conditions are set in the range between 325 °C and 412 °C, as well as between 15 bar and 50 bar. The kinetic analysis shows that the hydrogenation rate-limiting-step is related to a one-dimensional interface-controlled reaction with a driving-force-corrected apparent activation energy of 146 ± 3 kJ∙mol H 2 −1. Applying the kinetic model, the dependence of the reaction rate constant as a function of pressure and temperature is calculated, allowing the design of optimized hydrogen/energy storage vessels via finite element method (FEM) simulations. [Display omitted] • Experimental determination of hydrogenation thermodynamic parameters. • Critical analysis of the reported hydrogenation thermodynamic data. • Development of a comprehensive semi-empirical absorption kinetic model. • One-dimensional interface-controlled reaction upon hydrogenation. [ABSTRACT FROM AUTHOR]

Abstract Magnesium hydride owns the largest share of publications on solid materials for hydrogen storage. The "Magnesium group" of international experts contributing to IEA Task 32 "Hydrogen Based Energy Storage" recently published two review papers presenting the activities of the group focused on magnesium hydride based materials and on Mg based compounds for hydrogen and energy storage. This review article not only overviews the latest activities on both fundamental aspects of Mg-based hydrides and their applications, but also presents a historic overview on the topic and outlines projected future developments. Particular attention is paid to the theoretical and experimental studies of Mg-H system at extreme pressures, kinetics and thermodynamics of the systems based on MgH 2 , nanostructuring, new Mg-based compounds and novel composites, and catalysis in the Mg based H storage systems. Finally, thermal energy storage and upscaled H storage systems accommodating MgH 2 are presented. Highlights • Historical overview of Mg-based hydrides. • Nanostructured Mg-based H storage materials prepared by mechanical alloying and reactive ball milling. • Thermodynamics and kinetics for Mg-based hydrides. • Catalysis in Mg-H system. • Mg-H system at high pressures: theoretical and experimental studies. [ABSTRACT FROM AUTHOR]

Abstract In the past decades, complex hydrides and complex hydrides-based materials have been thoroughly investigated as materials for energy storage, owing to their very high gravimetric and volumetric hydrogen capacities and interesting cation and hydrogen diffusion properties. Concerning hydrogen storage, the main limitations of this class of materials are the high working temperatures and pressures, the low hydrogen absorption and desorption rates and the poor cyclability. In the past years, research in this field has been focused on understanding the hydrogen release and uptake mechanism of the pristine and catalyzed materials and on the characterization of the thermodynamic aspects, in order to rationally choose the composition and the stoichiometry of the systems in terms of hydrogen active phases and catalysts/destabilizing agents. Moreover, new materials have been discovered and characterized in an attempt to find systems with properties suitable for practical on-board and stationary applications. A significant part of this rich and productive activity has been performed by the research groups led by the Experts of the International Energy Agreement Task 32, often in collaborative research projects. The most recent findings of these joint activities and other noteworthy recent results in the field are reported in this paper. Highlights • New borohydrides are described concerning the chemical and structural properties. • The H 2 mechanism in innovative RHCs and the use of original catalysts are evidenced. • The ionic liquids' action on H 2 production and release by borohydrides is detailed. • The use of metal hydrides as catalysts for (de)hydrogenation reactions is explored. • Original solubility data in hydrides systems in solid and liquid state are presented. [ABSTRACT FROM AUTHOR]

Magnesium has been studied as a potential hydrogen storage material for several decades because of its relatively high hydrogen storage capacity, fast sorption kinetics (when doped with transition metal based additives), and abundance. This research aims to study the possibility to use waste magnesium alloys to produce good quality MgH 2 . The production costs of hydrogen storage materials is still one of the major barriers disabling scale up for mobile or stationary application. The recycling of magnesium-based waste to produce magnesium hydride will significantly contribute to the cost reduction of this material. This study focuses on the effect of different parameters such as the addition of graphite and/or Nb 2 O 5 as well as the effect of milling time on the material hydrogenation/de-hydrogenation performances. In addition, morphology and microstructural features are also evaluated for all the investigated materials. [ABSTRACT FROM AUTHOR]

For the storage of hydrogen, complex metal hydrides are considered as highly promising with respect to capacity, reversibility and safety. The optimization of corresponding storage tanks demands a precise and time-resolved investigation of the hydrogen distribution in scaled-up metal hydride beds. In this study it is shown that in situ fission Neutron Radiography provides unique insights into the spatial distribution of hydrogen even for scaled-up compacts and therewith enables a direct study of hydrogen storage tanks. A technique is introduced for the precise quantification of both time-resolved data and a priori material distribution, allowing inter alia for an optimization of compacts manufacturing process. For the first time, several macroscopic fields are combined which elucidates the great potential of Neutron Imaging for investigations of metal hydrides by going further than solely ’imaging’ the system: A combination of in-situ Neutron Radiography, IR-Thermography and thermodynamic quantities can reveal the interdependency of different driving forces for a scaled-up sodium alanate pellet by means of a multi-correlation analysis. A decisive and time-resolved, complex influence of material packing density is derived. The results of this study enable a variety of new investigation possibilities that provide essential information on the optimization of future hydrogen storage tanks. [ABSTRACT FROM AUTHOR]

Lithium reactive hydride composite 2LiBH 4 + MgH 2 (Li-RHC) has been lately investigated owing to its potential as hydrogen storage medium for mobile applications. However, the main problem associated with this material is its sluggish kinetic behavior. Thus, aiming to improve the kinetic properties, in the present work the effect of the addition of Fe to Li-RHC is investigated. The addition of Fe lowers the starting decomposition temperature of Li-RHC about 30 °C and leads to a considerably faster isothermal dehydrogenation rate during the first hydrogen sorption cycle. Upon hydrogenation, MgH 2 and LiBH 4 are formed whereas Fe appears not to take part in any reaction. Upon the first dehydrogenation, the formation of nanocrystalline, well distributed FeB reduces the overall hydrogen storage capacity of the system. Throughout cycling, the agglomeration of FeB particles causes a kinetic deterioration. An analysis of the hydrogen kinetic mechanism during cycling shows that the hydrogenation and dehydrogenation behavior is influenced by the activity of FeB as heterogeneous nucleation center for MgB 2 and its non-homogenous distribution in the Li-RHC matrix. [ABSTRACT FROM AUTHOR]

The production cost of materials for hydrogen storage is one of the major issues to be addressed in order to consider them suitable for large scale applications. In the last decades several authors reported on the hydrogen sorption properties of Mg and Mg-based systems. In this work magnesium industrial wastes of AZ91 alloy and Mg-10 wt.% Gd alloy are used for the production of hydrogen storage materials. The hydrogen sorption properties of the alloys were investigated by means of volumetric technique, in situ synchrotron radiation powder X-ray diffraction (SR-PXD) and calorimetric methods. The measured reversible hydrogen storage capacity for the alloys AZ91 and Mg-10 wt.% Gd are 4.2 and 5.8 wt.%, respectively. For the Mg-10 wt.% Gd alloy, the hydrogenated product was also successfully used as starting reactant for the synthesis of Mg(NH 2 ) 2 and as MgH 2 substitute in the Reactive Hydride Composite (RHC) 2LiBH 4 + MgH 2 . The results of this work demonstrate the concrete possibility to use Mg alloy wastes for hydrogen storage purposes. [ABSTRACT FROM AUTHOR]

Abstract: The present investigation focuses on a new synthesis route of NaBH4 starting from the 2NaH + MgB2 system subjected to mechanochemical activation under reactive hydrogen atmosphere. The milling process was carried out under two different hydrogen pressures (1 and 120 bar) with two different rotation speeds (300 and 550 rpm). The reaction products were characterized by ex-situ solid state magic angle spinning (MAS) nuclear magnetic resonance (NMR), ex-situ X-ray powder diffraction (XRPD) and Infrared Spectroscopy (IR). From the results of these analyses, it can be concluded that milling in all the considered conditions led to the formation of NaBH4 (cubic-Fm-3m). In particular, a reaction yield of 5 and 14 wt% is obtained after 20 h of milling at 120 bar of H2 for the tests performed at 300 rpm and 550 rpm, respectively. The presence of MgH2 is also detected among the final products on the as milled powders. The influence of the milling conditions and the evaluation of the parameters related the mechanochemical process are here discussed. [Copyright &y& Elsevier]