173 results on '"Deconinck J"'
Search Results
2. A modelling approach on the impact of an oxide layer on the hydrogen permeation through iron membranes in the Devanathan-Stachurski cell
3. Numerical modeling of oxygen mass transfer in a wire wrapped fuel assembly under flowing lead bismuth eutectic
4. Capillary water absorption in cracked and uncracked mortar – A comparison between experimental study and finite element analysis
5. Clay mineralogical and geochemical expressions of the “Late Campanian Event” in the Aquitaine and Paris basins (France): Palaeoenvironmental implications
6. The influence of the capillary size and shape on the readings of the electrochemical microcapillary technique: a parametric study by means of the multi-ion modeling
7. An integrated modeling approach for atmospheric corrosion in presence of a varying electrolyte film
8. Influence of the electrolyte film thickness and NaCl concentration on the oxygen reduction current on platinum
9. A Modified Multiphysics model for Lithium-Ion batteries with a LixNi1/3Mn1/3Co1/3O2 electrode
10. Novel use of a micro-optode in overcoming the negative influence of the amperometric micro-probe on localized corrosion measurements
11. A mass transfer correlation for packed bed of lead oxide spheres in flowing lead–bismuth eutectic at high Péclet numbers
12. Simulated and measured response of oxygen SECM-measurements in presence of a corrosion process
13. Temperature dependence of dissolution rate of a lead oxide mass exchanger in lead–bismuth eutectic
14. Multi-ion transport and reaction model used to improve the understanding of local current density measurements in presence of concentration gradients around a point current source
15. Validation of predictive model for galvanic corrosion under thin electrolyte layers: An application to aluminium 2024-CFRP material combination
16. Numerical modeling of oxygen mass transfer from PbO spheres packed bed to liquid lead bismuth eutectic: A venturi-type PbO mass exchanger
17. A temperature dependent multi-ion model for time accurate numerical simulation of the electrochemical machining process. Part III: Experimental validation
18. Simulation of nano-second pulsed phenomena in electrochemical micromachining processes – Effects of the signal and double layer properties
19. Steady-state analysis of the nickel oxide in neutral and weakly alkaline solutions
20. Multi-Ion and Temperature Dependent Numerical Simulation of Electrochemical Machining
21. Time-Efficient Simulations of Nano-Pulsed Electrochemical Micro- Machining
22. A transient multi-ion transport model for galvanized steel corrosion protection
23. A temperature dependent multi-ion model for time accurate numerical simulation of the electrochemical machining process. Part II: Numerical simulation
24. Influence of the applied potential and pH on the steady-state behavior of the iron oxide
25. Modeling localized aluminum alloy corrosion in chloride solutions under non-equilibrium conditions: Steps toward understanding pitting initiation
26. A temperature dependent multi-ion model for time accurate numerical simulation of the electrochemical machining process. Part I: Theoretical basis
27. Study of the effects of heat removal on the copying accuracy of the electrochemical machining process
28. A new approach for shape optimization of resistors with complex geometry
29. A novel pulse shortcut strategy for simulating nano-second pulse electrochemical micro-machining
30. Efficient algebraic multigrid for migration–diffusion–convection–reaction systems arising in electrochemical simulations
31. On the modeling of electrochemical systems with simultaneous gas evolution. Case study: The zinc deposition mechanism
32. The electrochemistry in 316SS crevices exposed to PWR-relevant conditions
33. Crack propagation rate modelling for 316SS exposed to PWR-relevant conditions
34. Experimental study and modelling of anodizing of aluminium in a wall-jet electrode set-up in laminar and turbulent regime
35. Time averaged calculations in pulse electrochemical machining, using a strongly non-linear model
36. Turbulent fluid flow and electrochemical mass transfer in an annular duct with an obstruction
37. Time-averaged concentration calculations in pulse electrochemical machining, spectral approach
38. Time averaged temperature calculations in pulse electrochemical machining, spectral approach
39. 3D Numerical Computation of the Induced Potential Distribution on Buried Pipelines by Neighbour HV Lines Working on Normal and Fault Conditions
40. Time averaged concentration calculations in pulse electrochemical machining
41. Time averaged temperature calculations in pulse electrochemical machining, part II: numerical simulation
42. Time averaged temperature calculations in pulse electrochemical machining. Part I: theoretical basis
43. Calculation of temperature transients in pulse electrochemical machining (PECM)
44. Numerical model for predicting the efficiency behaviour during pulsed electrochemical machining of steel in NaNO3
45. Finite element calculation of crack propagation in type 304 stainless steel in diluted sulphuric acid solutions
46. Laminar and turbulent mass transfer simulations in a parallel plate reactor
47. Highly regular wavelets for the detection of clustered microcalcifications in mammograms
48. Evolution of clay mineral assemblages and organic matter in the late glacial-Holocene sedimentary infill of Lake Annecy, (northwestern Alps): paleoenvironmental implications
49. Copper deposition on micropatterned electrodes from an industrial acid copper plating bath
50. Comment on “Numerical model for predicting the efficiency behaviour during pulsed electrochemical machining of steel in NaNO3” [Van Damme S. et al. (2006) J Appl Electrochem 36(1):1]
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.