Search

Introduction: Occupational exposure to antineoplastic drugs can lead to long-term adverse effects on workers' health. A reproducible Canadian surface monitoring program was established in 2010. The objective was to describe contamination with 11 antineoplastic drugs measured on 12 surfaces among hospitals participating in this annual monitoring program. Methods: Each hospital sampled six standardized sites in oncology pharmacies and six in outpatient clinics. Ultra-performance liquid chromatography coupled with tandem mass spectrometry was used for cyclophosphamide, docetaxel, doxorubicin, etoposide, 5-fluorouracil, gemcitabine, irinotecan, methotrexate, paclitaxel, and vinorelbine. Platinum-based drugs were analyzed by inductively coupled plasma mass spectrometry; this excludes inorganic platinum from the environment. Hospitals filled out an online questionnaire about their practices; a Kolmogorov–Smirnov test was used for some practices. Results: One hundred and twenty-four Canadian hospitals participated. Cyclophosphamide (405/1445, 28%), gemcitabine (347/1445, 24%), and platinum (71/756, 9%) were the most frequent. The 90th percentile of surface concentration was 0.01 ng/cm² for cyclophosphamide and 0.003 ng/cm² for gemcitabine. Centers that prepared 5000 or more antineoplastic per year had higher concentrations of cyclophosphamide and gemcitabine on their surfaces (p = 0.0001). Almost half maintained a hazardous drugs committee (46/119, 39%), but this did not influence the cyclophosphamide contamination (p = 0.051). Hazardous drugs training was more frequent for oncology pharmacy and nursing staff than for hygiene and sanitation staff. Conclusions: This monitoring program allowed centers to benchmark their contamination with pragmatic contamination thresholds derived from the Canadian 90th percentiles. Regular participation and local hazardous drug committee involvement provide an opportunity to review practices, identify risk areas, and refresh training. [ABSTRACT FROM AUTHOR]

Introduction: Occupational exposure to antineoplastic drugs can lead to long-term adverse effects on workers' health. Environmental monitoring is conducted once a year, as part of a Canadian monitoring program. The objective was to describe contamination with 11 antineoplastic drugs measured on surfaces. Methods: Six standardized sites in oncology pharmacy and six in outpatient clinic were sampled in each hospital. Samples were analyzed by ultra-performance liquid chromatography coupled with tandem mass spectrometry (non-platinum drugs) and by inductively coupled plasma mass spectrometry (platinum-based drugs). The limits of detection (in ng/cm2) were: 0.0006 for cyclophosphamide; 0.001 for docetaxel; 0.04 for 5-fluorouracil; 0.0004 for gemcitabine; 0.0007 for irinotecan; 0.0009 for methotrexate; 0.004 for paclitaxel, 0.009 for vinorelbine, 0.02 for doxorubicine, 0.0037 for etoposide and 0.004 for the platinum. Sub-analyses were done with a Kolmogorov-Smirnov test Results: 122 Canadian hospitals participated. Cyclophosphamide (451/1412, 32% of positive samples, 90th percentile of concentration 0.0160 ng/cm2) and gemcitabine (320/1412, 23%, 0.0036 ng/cm2) were most frequently measured on surfaces. The surfaces most frequently contaminated with at least one drug were the front grille inside the biological safety cabinet (97/121, 80%) and the armrest of patient treatment chair (92/118, 78%).The distribution of cyclophosphamide concentration was higher for centers that prepared ≥ 5000 antineoplastic drug preparations/year (p < 0.0001). Conclusions: This monitoring program allowed centers to benchmark their contamination with pragmatic contamination thresholds derived from the Canadian 90th percentiles. Problematic areas need corrective measures such as decontamination. The program helps to increase the workers' awareness. [ABSTRACT FROM AUTHOR]

Monitoring patients' metal ion blood concentrations can be useful in cases of problematic metal on metal hip implants. Our objective was to evaluate the reproducibility of metal ion level values measured by two different laboratories. Whole blood samples were collected in 46 patients with metal on metal hip arthroplasty. For each patients, two whole blood samples were collected and analyzed by two laboratories. Laboratory 1 had higher results than laboratory 2. There was a clinically significant absolute difference between the two laboratories, above the predetermined threshold, 35% of Cr samples and 38% of Co samples. All laboratories do not use the same technologies for their measurements. Therefore, decision to revise a metal on metal hip arthroplasty should rely on metal ion trends and have to be done in the same laboratory. [ABSTRACT FROM AUTHOR]

Biomonitoring for manganese (Mn) exposure is important due to its potential to cause adverse health effects. In this study, we investigate how different sample preparation methods (dilution, digestion), calibration protocols (aqueous, blood-based, standard additions), and instrumental techniques affect Mn method bias and analytical imprecision. The techniques used included graphite furnace atomic absorption spectrometry (GFAAS), dynamic reaction cell inductively coupled plasma mass spectrometry (DRC-ICP-MS), and sector field (SF-) ICP-MS. We analyzed NIST SRM 1643e Trace Elements in Water and SRM 1598a Inorganic Constituents in Animal Serum (both certified for Mn), and SRM 955c Toxic Metals in Caprine Blood – Level 1 (not certified for Mn). Various matrix effects in ICP-MS produced inaccurate results for SRM 1643e and discrepant results for SRM 955c. In the absence of a certified value for Mn in SRM 955c, we assigned a “consensus” value by combining data from the New York State Department of Health (NYS), the Centers for Disease Control and Prevention (CDC) and the Centre de toxicologie du Québec (CTQ). With this interlaboratory approach, we established an “all-lab” consensus value of 16.3 ± 0.8 μg L−1 based on data from DRC-ICP-MS with dilution sample preparation and blood-based calibration. We also assigned an “all-method” consensus value of 16.3 ± 0.9 μg L−1 based on GFAAS and SF-ICP-MS data from the NYS lab and the DRC-ICP-MS all-lab consensus value. Although the expanded uncertainty (U) calculated for the consensus values may not fully account for all sources of uncertainty, it does show the relative variation that might be expected from one study to the next for the determination of Mn in blood. [ABSTRACT FROM AUTHOR]

Given the susceptibility of the fetus to toxicants, it is important to estimate their exposure. Approximately 2000 pregnant women were recruited in 2008–2011 from 10 cities across Canada. Cd, Pb, Mn and total Hg were measured in maternal blood from the 1st and 3rd trimesters, umbilical cord blood, and infant meconium. Nutrient intakes of vitamin D, iron, and calcium (Ca) were assessed using a food frequency questionnaire and a dietary supplement questionnaire. Median concentrations in 1st trimester maternal blood (n = 1938) were 0.20, 8.79 and 0.70 μg/L for Cd, Mn and Hg, respectively, and 0.60 μg/dL for Pb. While the median difference between the paired 1st and 3rd trimester concentrations of Cd was 0, there was a significant decrease in Pb (0.04 μg/dL) and Hg (0.12 μg/L) and an increase in Mn (3.30 μg/L) concentrations over the course of the pregnancy. While Cd was rarely detected in cord blood (19%) or meconium (3%), median Pb (0.77 μg/dL), Mn (31.87 μg/L) and Hg (0.80 μg/L) concentrations in cord blood were significantly higher than in maternal blood. Significant negative associations were observed between estimated Ca intake and maternal Cd, Pb, Mn and Hg, as well as cord blood Pb. Vitamin D intake was associated with lower maternal Cd, Pb, and Mn as well as Pb in cord blood. Even at current metal exposure levels, increasing dietary Ca and vitamin D intake during pregnancy may be associated with lower maternal blood Pb and Cd concentrations and lower Pb in cord blood. [ABSTRACT FROM AUTHOR]

Abstract: We review the state-of-the-art application of nanoparticles (NPs) in electrochemical analysis of environmental pollutants. We summarize methods for preparing NPs and modifying electrode surfaces with NPs. We describe several examples of applications in environmental electrochemical sensors and performance in terms of sensitivity and selectivity for both metal and metal-oxide NPs. We present recent trends in the beneficial use of NPs in constructing electrochemical sensors for environmental monitoring and discuss future challenges. NPs have promising potential to increase competitiveness of electrochemical sensors in environmental monitoring, though research has focused mainly on development of methodology for fabricating new sensors, and the number of studies for optimizing the performance of sensors and the applicability to real samples is still limited. [Copyright &y& Elsevier]

Background: Clinical dosage of toxic and essential elements in blood is well established and the collection method is still by venipuncture. This method has drawbacks and is not suited for everyone. Volumetric absorptive microsampling (VAMS) has been shown to have advantages over venipuncture. Materials & methods: Using inductively coupled plasma tandem mass spectrometry, a method for quantifying elements in whole blood sampled on VAMS was developed/validated. Method's performance was assessed by comparison with whole blood results. Results: Validation and performance assessment tests tend to show that most of the targeted elements provides accurate and reproducible results comparing to a method of reference. Conclusion: Overall, VAMS presents good preliminary results to eventually become an alternative to venipuncture for blood sampling for some trace elements analysis purposes.

Background: Lead is harmful for humans by having adverse effects on different biological systems. Venepuncture is the gold standard for blood lead level analysis, but this method has many flaws. The goal of this research was to develop and validate a more practical approach for blood sampling. Materials & methods: Mitra ® devices based on VAMS ® and inductively coupled plasma-MS/MS technologies were employed. Performance evaluation of the newly developed method was also performed by comparing it versus a commonly used method at the Centre de Toxicologie du Québec for blood lead level analysis. Results: Comparison showed no signs of significant difference between the two methods. Conclusion: VAMS may be a useful alternative sampling approach for further research on blood lead analysis and possibly for many other trace elements.

Biomonitoring for manganese (Mn) exposure is important due to its potential to cause adverse health effects. In this study, we investigate how different sample preparation methods (simple dilution, digestion, volumetric, gravimetric), calibration protocols (aqueous, blood-based, standard additions), and instrumental techniques affect Mn method bias and analytical imprecision. The techniques used included graphite furnace atomic absorption spectrometry (GFAAS), dynamic reaction cell inductively coupled plasma mass spectrometry (DRC-ICP-MS), and sector field (SF-) ICP-MS. We analyzed NIST SRM 1643e Trace Elements in Water and SRM 1598a Inorganic Constituents in Animal Serum (both certified for Mn), and SRM 955c Toxic Metals in Caprine Blood - Level 1 (not certified for Mn). Various matrix effects in ICP-MS produced inaccurate results for SRM 1643e and discrepant results for SRM 955c. In the absence of a certified value for Mn in SRM 955c, we assigned a "consensus" value by combining data from the New York State Department of Health (NYS), the Centers for Disease Control and Prevention (CDC) and the Centre de toxicologie du Québec (CTQ). With this interlaboratory approach, we established an "all-lab" consensus value of 16.3 ± 0.8 μg L -1 based on data from DRC-ICP-MS with simple dilution sample preparation and blood-based calibration. We also assigned an "all-method" consensus value of 16.3 ± 0.9 μg L -1 based on GFAAS and SF-ICP-MS data from the NYS lab and the DRC-ICP-MS all-lab consensus value. Although the expanded uncertainty ( U ) calculated for the consensus values may not fully account for all sources of uncertainty, it does show the relative variation that might be expected from one study to the next for the determination of Mn in blood.

The electrocatalytic hydrogenation (ECH) of phenol has been studied using palladium supported on gamma-alumina (10% Pd-Al2O3) catalysts. The catalyst powders were suspended in aqueous supporting electrolyte solutions containing methanol and short-chain aliphatic acids (acetic acid, propionic acid, or butyric acid) and were dynamically circulated through a reticulated vitreous carbon cathode. The efficiency of the hydrogenation process was measured as a function of the total electrolytic charge and was compared for different types of supporting electrolyte and for various solvent compositions. Our results show that these experimental parameters strongly affect the overall ECH efficiency of phenol. The ECH efficiency and yields vary inversely with the quantity of methanol present in the electrolytic solutions, whereas the presence of aliphatic carboxylic acids increased the ECH efficiency in proportion to the chain length of the specific acids employed. In all cases, ECH efficiency was directly correlated with the adsorption properties of phenol onto the Pd-alumina catalyst in the studied electrolyte solution, as measured independently using dynamic adsorption isotherms. It is shown that the alumina surface binds the aliphatic acids via the carboxylate terminations and transforms the catalyst into an organically functionalized material. Temperature-programmed mass spectrometry analysis and diffuse-reflectance infrared spectroscopy measurements confirm that the organic acids are stably bound to the alumina surface below 200 degrees C, with coverages that are independent of the acid chain length. These reproducibly functionalized alumina surfaces control the adsorption/desorption equilibrium of the target phenol molecules and allow us to prepare new electrocatalytic materials to enhance the efficiency of the ECH process. The in situ grafting of specific aliphatic acids on general purpose Pd-alumina catalysts offers a new and flexible mechanism to control the ECH process to enhance the selectivity, efficiency, and yields according to the properties of the specific target molecule.